Completion of Balance Works for camouflage painting to certain buildings and boundary wall in domestic area/Jhopra Complex at AF Stn Sirsa

Amount

M&L Rough Cast Plaster on Brick Walls consisting Under Coat of Cement and Sand Mortar 1:3 not less than 10mm thick and while it is still in Plastic state the Rough Cast Mixture consisting of Crushed Stone mixed with Coarse Sand and Cement in the Ratio 1:1:1 shall be applied and finish Even, including taking down of the old plaster complete all as specified and as directed by Engineer-in-Charge.

M&L for 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc, fixed with L-type or J-type hook bolts, including dismantling of unserviceable sheets complete all as specified and as directed by Engineer-in-Charge.

M&L for Raking out joints & flush pointing in Cement mortar 1:3 to brick tiles, laid flat, in roofs, etc., complete all as specified and as directed by Engineer-in-Charge.

M&L Preparing old Plastered Surfaces of Walls by Complete Removal of existing Surfaces Treatment and applying wall care putty, rubbing to obtained a Smooth Surface, applying Two Coats of Weather Coat Exterior Emulsion Paint (in New Camouflage pattern) with approved Tint over a coat of Primer (as per Manufacturer's instructions), complete all as specified and as directed by Engineer-in-Charge. NOTE: Rates quoted by the tenderer are included with following apllication as under :- (a) The surfaces shall be cleaned to remove loose dirt or dust, lichen, algae, fungi or any organic growth by use of stiff brush, washed well and allow water to dry. (b) All cracks, voids and minor damages shall be patched/repaired prior to application of paint with white cement putty or with Plaster of Paris. (c) Manufacturer's Test Certificate and delivery challan of material issued by the company to be provided before payment.

M&L Preparing untreated old Brick or concrete surface of roof applying Two Coats of Cement base paint (in Camouflage pattern) with approved Tint over a coat of Primer (as per Manufacturer's instructions), complete all as specified and as directed by Engineer-in-Charge. NOTE: Rates quoted by the tenderer are included with following apllication as under :- (a) The surfaces shall be cleaned to remove loose dirt or dust,lichen, algae, fungi or any organic growth by use of stiff brush , washed well and allow water to dry. (b) All cracks, voids and minor damages shall be patched/repaired prior to application of paint with cement slurry wash.

M&L for galvanised corrugated mild steel sheeting 0.63 mm thick with two corrugations side lap, fixed with L or J-type screws and washers, bent to curve, in roofs, walls etc., including dismantling of the same, complete all as specified and as directed by Engineer-in-Charge.

M&L preparing New corrugated sheets in roof /walls applying Two Coats of synthetic Enamel Paint (in Camouflage pattern) with approved Tint over a coat of Red oxide zinc chrome Primer (as per Manufacturer's instructions), complete all as specified and as directed.

M&L preparing untreated old AC sheets in roof applying Two Coats of cement base paint (in Camouflage pattern) with approved Tint over a coat of Primer (as per Manufacturer's instructions), complete all as specified and as directed by Engineer-in-Charge. NOTE: Rates quoted by the tenderer are included with following apllication as under :- (a) The surfaces shall be cleaned to remove loose dirt or dust, lichen, algae, fungi or any organic growth by use of stiff brush, washed well and allow water to dry.

M&L preparing new AC sheets in roof applying Two Coats of cement base paint (in Camouflage pattern) with approved Tint over a coat of Primer (as per Manufacturer's instructions), complete all as specified and as directed.

M&L for 15 mm thick plastering in two layers, 10 mm + 5 mm in cement mortar 1:4, top layer of 5 mm thickness mixed with with water proofing compound on brick/stone walls or concrete surfaces finished even and fair (upto any height) for external surfaces complete all as specified and directed. Note : Water Proofing compound shall be measured and paid separetly as "Supply only"

Supply only Integral Water Proofing Compound, ISI Marked, as approved, complete all as specified and as directed.

M&L preparing newly Rough Cast plastered surfaces of Walls and applying Two Coats of Weather Coat Exterior Emulsion Paint (in New Camouflage pattern as ordered) with approved Tint over a coat of Primer (as per Manufacturer's instructions), complete all as specified and as directed.

M&L preparing Old treated/painted Steel and Iron Surfaces of any description, applying one Coat of Synthetic Enamel Paint (First quality) for Y shape Mild steel angle frame (area 0.25 Sqm and n.exc 0.50 sqm each) fixed on top of boundary walls (straining/supported to barbed wire and concertina coil) , complete all as specified and as directed.

M&L Preparing New Plastered Surfaces of Walls by applying 2 mm thick exterior wall putty, rubbing to obtained a Smooth Surface, applying Two Coats of Weather Coat Exterior Emulsion Paint (in Camouflage pattern) with approved Tint over a coat of Primer (as per Manufacturer's instructions), complete all as specified and as directed by Engineer-in-Charge. NOTE: Rates quoted by the tenderer shall be deemed to be included with following application as under :- (a) The surfaces shall be cleaned to remove loose dirt or dust,lichen, algae, fungi or any organic growth by use of stiff brush, washed well and allow water to dry. (b) All cracks, voids and minor damages shall be patched/repaired prior to application of paint with white cement putty or with Plaster of Paris.

M&L preparing Old treated/ painted Steel and Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) for CGI/PGI Sheet in roofing, etc. (in New Camouflage Pattern), complete all as specified and as directed by Engineer-in-Charge. (Height of building is approx 6.0 meter). NOTE:- Rates quoted by the tenderer shall be deemed to be included with following application as under :- (a) The surfaces shall be cleaned to remove loose dirt, old paint by use of sand paper, washed with alkaline soap solution in case of oil and grease, or with the help of paint removing chemicals as per manufacturers instructions.

Dismantling of bricks (laid flat or on edge) or brick tiles laid dry and pointed in any mortar in floors, channels, kerbs, aprons, over roof surfaces etc. alongwith screed bed complete all as specified and directed.

S&F 40mm thick brick tiles jointed and pointed in cement mortar (1:3) mixed with crude oil @ 5% by weight of cement over 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

Fixing Only 40mm thick brick tiles jointed and pointed in cement mortar (1:3) mixed with crude oil @ 5% by weight of cement over 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed. NOTE:- Serviceable brick tiles obtained from dismantling shall be reused.

shiv shanker enterprises