ADDN ALTN TO BLDG NO P 179, ADDN ALTN TOGATE AND CONNECTED WORKS TO OMQ AND PROVN OF CERTAIN B/R WORKS AT UNIT SECURITY SECTION AT HQ TC(U)

Amount

COMMON ITEMS FOR JOB 'A', 'B' & 'C'

S&F TMT Bars 10mm dia and over, cut to length, bent to shape required, inculding cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (ennealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L Pre-cast cement concrete block masonry with solid blocks type C1, 1:3:6 ( 20 mm graded aggregate) exc. 10 cm in width and setting in mortar 1:6, complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement including mixing of water proofing compound wherever required as per manufacturers instructions complete all as specified and directed. Note:WPC shall be measured & paid separately. .

M&L for preparing new plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant primer on surfaces of walls complete all as specified and directed.

Supply only liquid water proofing compound of approved quality complete all as specified and directed.

Dismantling structural steel work including doors, gates and similar works but excluding framed truss etc complete all as specified and directed.

M&L for framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 Gde-E-165 portions framed and hung as gates, including pintle hinges, stops,hand-made sliding bolts, etc complete all as specified and directed.

M&L preparation of new or previously untrated steel surface of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Demolition of cement concrete(unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level)complete all as specified and directed.

M&L for hardcore of gauge not exceeding 63 mm of broken stone, deposited, spread and leveled in layers not exceeding 15 cm thick, watered and rammed to a true surface.complete all as specified and directed.

M&L for 75 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone aggregate for sub base hard standing including finishing the surface even and fair complete all as specified and directed.

M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) including finishing the surface even and fair complete all as specified and directed complete all as specified and directed.

S&F Metal flush box 6 module complete all as specified and directed.

M&L for sand cushioning to under ground cable with locally available dry sand for protection of cable or under paver blocks complete all as specified and directed. Note- Punned thickness of sand i.e 18 cm shall be considered for measurement purpose for dry sand for protection of cable.

ITEMS APPLICABLE FOR JOB 'A':-

Taking down of chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutters from the frames) and set aside or removing from site complete all as specified and directed.

Taking down of chowkats or frames exc 1.5 sqm but n. exc 4 sqm each (without taking off shutters from the frames) and set aside or removing from site complete all as specified and directed.

S&F for fixing in partly glazed partition of height from floor with 12mm thick interior grade phenol formaldehyde bonded as per IS3087 melamine faced both sides prelaminated particle board/ MDF board of approved shade and manufacturer and glazed portion as per direction of the Engr-in Charge and middle portion with 8 mm thick tinted glass in aluminium frame work consisting of rectangular section of size approx.62.5x37.10x2mm ,glazing clip section no 4660 of Jindal / Hindalco etc . Rate to allow for anodizing the aluminium sections in natural plain colour as directed by the Engineer in charge. Note:- Aluminium Partition shall be fixed at site in different stages as per the following.(a) From bottom upto 1.2 mtr height 12mm thick interior grade phenol formaldehyde bonded as per IS3087 melamine faced both sides prelaminated particle board/ MDF board will be fixed.(b) From Top of board up to 1.00mtr height 8 mm thick tinted shall be provided. (c ) Remaining portion above glass up to ceiling height again board 12mm thick interior grade phenol formaldehyde bonded as per IS3087 melamine faced both sides prelaminated particle board/ MDF board will be fixed with aluminium frame complete all as specified and directed.

S&F Anodised aluminium frame powder coating, for doors, windows, ventilators, Partition/fixed type windows, aluminium grill etc with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F Anodised aluminium sliding door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and directed.

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F Powder coating (minimum thickness of powder coating 50 micron) anodised aluminium sliding window and ventilator shutters, aluminium sections weighing not less then 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings complete all as specified and as directed. Note : sheet Glass and SS wiremesh shall be measured & paid separately.

S&F Powder coating (minimum thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing not less then 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified and as directed. Note : sheet Glass and SS wiremesh shall be measured & paid separately. .

S&F in stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples including beads all as specified and directed

S&F 4.8 mm thick sheet glass ordinary quantity and glazing with oil putty in squares not exceeding 0.50 sqm in each pane complete all as specified and directed.

S&F Tee grid suspension system of size 600 mm x600 mm type-1 made out of rolled framed hot dipped galvanised steel zinc coated of not less than 120 gm/sqm , main runner shall be 0.3 mm thick of section 24 mm x 33 mm cross runner 0.3 mm thickof section 24 mm x 25 mm,wall angle shall be 0.63 mm thick of section 24 mmx24 mm grid shall be suspended by 4 mm dia adjustable quick fit hanger rod ,system exposed portion shall be pre painted polyster coated in off white/white in colour complete with material,fixing, jointing etc all as per manufactures instructions complete all as specified and directed. Make:- METROC or METACIL or any other techno-commercially equivalent make as approved by GE.

M&L for fibre cement coloured textured designer ceiling board 4mm thick of size 595x595 mm conforming to IS : 14862 & IS : 2380 Part-XIV fixed to timber / GI / Aluminium frame work with screws/clips complete all as specified and directed.

S&F Gl frame Size of grid 605 x 605mm for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with clips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.

M&L Seamless calcium silicate ceiling made out of 1800 x 1200 mm 12mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish complete all as specified and directed. Note: Frame work for ceiling shall be measured and paid separately.

M&L Preparation of new surface of false ceiling by applying 3mm thick wall care putty and making the surface smooth and applying two coat of oil emulsion distemper over one coat of primer using roller for painting complete all as specified & directed.

S&F Factory Made Solid PVC Moulded Door Shutter,with particle board core , 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded prelam PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F in repairs Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F 100mm mild steel butt hinges, medium weight, cold rolled complete all as specified and directed.

S&F 150 mm alluminium anodised barrel tower bolts of stove enameled black, with bright bolt and fixed complete all as specified and directed. .

M&L for treatment of soil under existing floors using emulsion @ one lts per hole 300mm apart incl drilling and plugging 12mm dia holes with cement mortar 1:2 to match the existing floors complete all as specified and directed. .

M&L for treatment along the external wall below concrete or masonry apron using chemecal emulsion @ 2.25 ltrs per metre incl drilling and plugging holes etc in apron complete all as specified and directed.

S&F for 18/19 mm thick veneered decorative plywood, grade 1( with BWR resin), with decorative faqce veneers on both faces fixed with screws to timber frame work for built in cupboards, shelves,almirahs etc complete all as specified and directed.

S&F for Brass Godrej Mortice lock, vertical type, size 100 mm 4 levers include for escutcheon plates and two keys in repairs complete all as specified and directed.

S&F 100 mm long Mortice latch with two levers (vertical type), brass body and fixed complete all as specified and directed.

S&F Stainless steel clip on auto closing panel concealed hinges thickness 15-22 mm for full overlay door 0 degree crank for cupboard door complete all as specified and directed.

S&F 100 mm long Extruded brass handles, fabricated type polished complete all as specified and directed.

S&F magnetic ball catch all as specified and directed.

S&F for Powder coated fancy type Stainless Steel curtain rod 25mm dia with suitable SS brackets with suitable woodenround base and fency type end top matching to curtain rod of make as approved by GE complete all as specified and directed. Note:Additional supporting bracket shall be provided if length is exceeding 1.2m and rate quoted shall include for the same.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in Cement mortar 1:6, finished even and smooth with out using extra cement. all as specified and direction by Engr in Charge.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for preparing old plastered surfaces of ceiling and applying Two coat of white wash on surfaces of ceilings complete all as specified and directed.

M&L for preparing old plastered surfaces of wall and applying one coats of cement base paint through mechanical means complete all as specified and directed.

M&L for preparing new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer over and including applying 2 mm thickness plaster of paris putty to prepare the surface even and smooth complete all as specified and directed.

M&L for complete removal of existing treatment of old plastered surfaces of walls and applying through mechanical means Two coats of oil bound distemper over a coat of alkali resistant primer over and including applying 1 mm thickness plaster of paris putty to prepare the surface even and smooth complete all as specified and directed.

M&L for Plain Cement Concrete Type B0 , 1:2:4 (using 12.5 mm graded stone aggregate) cast in situ in cills and other similar bands, plinth courses, parapets, copings, hold fast ,bed plates ,filling hollow section of pressed steel frame and the like including use and waste of form work,weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for coloured non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding. 0.38 sqm, in floors etc. set and jointed in neat cement slurry over and including a 15 mm thick screed bed of cement mortar (1:6) and pointed with white or Coloured cement to match complete all as specified and directed. .

M&L for coloured non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding. 0.11 sqm, in floors etc. set and jointed in neat cement slurry over and including a 15 mm thick screed bed of cement mortar (1:6) and pointed with white or Coloured cement to match complete all as specified and directed.

M&L for coloured non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding. 0.38 sqm on vertical surfaces for skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering in cement mortar (1:4) for backing of tiles complete all as specified and directed.

M&L for Coloured Glazed ceramic design tiles 350x 250x 7mm/ 450X 300X 7mm thick, on vertical surfaces such as skirting, dados and risers to steps etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 10 mm thick rendering in cement mortar (1:4) complete all as specified and directed.

M&L for 25 mm thick PCC (1:2:4), type B0 (Using 12.5 mm graded stone aggregate) as in flooring, rough finish surfaces for receving top layer complete all as specified and directed. .

M&L for Granite (of any type) tiles 18-20 mm thick table rubbed and polished machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone in as in flooring and landings of stair case, treads including cutting and polishing of tiles and 20 mm thick screed bed of cement mortar 1:6 complete all as specified and directed.

Ditto as Sl Item No 55.00 here-in-before but vertical surfaces with 10 mm thick rendering of cement mortar 1:4 complete all as specified and directed. .

M&l for rounding to edges of stone slabs one edge,such as in steps, cooking platform, and other similar situations complete all as specified and directed.

S&F for Stainless steel kitchen plate rack of size 750mm x 600mm x 250mm, made of 1mm thick stainless steel sheet complete all as specified and directed.

S&F for 75 mm PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F for 110mm PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F for 150 mm PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls as rainwater pipe complete all as specified and directed.

S&F for 75 mm dia ,PVC Bends with access door all as specified and directed complete all as specified and directed.

S&F for 110 mm dia, PVC Bends with access door complete all as specified and directed.

S&F for 150 mm dia, PVC Bends with access door complete all as specified and directed.

S&F for 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door complete all as specified and directed.

S&F for 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door complete all as specified and directed.

S&F for 110 mm dia ,vent cowl in repairs complete all as specified and directed.

S&F for 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

Taking up or down steel tubing and connection 15 mm bore pipe and removing from site complete all as specified and as directed.

Taking up or down steel tubing and connection 20 mm bore pipe and removing from site complete all as specified and as directed.

Taking up or down steel tubing and connection 25 mm bore pipe and removing from site complete all as specified and as directed.

S&F for 15mm dia bore medium grade GI tubing and including all fitting ie elbow, Tee, union , tank nipple ,Coupling,etc fixed complete to walls, ceilings or in floors etc. complete all as specified and as directed.

S&F for 20 mm dia bore medium grade GI tubing and including all fitting ie elbow, Tee, union , tank nipple ,Coupling,etc fixed complete to walls, ceilings or in floors etc. complete all as specified and as directed.

S&F for 25mm dia bore medium grade GI tubing and including all fitting ie elbow, Tee, union , tank nipple ,Coupling,etc fixed complete to walls, ceilings or in floors etc. complete all as specified and as directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sun shades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc, and making good, cutting not exc l0cm girth in brick walls complete all as specified and as directed.

S&F for 1000 ltr capacity rotational moulded polyethene water storage tank ( cylindrical verticle with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed.

S&F for 25mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and directed. . (minimum weight 455 gms)

S&F for gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 25mm bore complete all as specified and directed.

S&F for Corner Glass Shelf, Fancy Type complete all as complete all as specified and as directed.

S&F for fancy type CP 2 way bib cock with wall flanges fixed as in repair complete all as specified and directed.

S&F for 15 mm bore chromium plated fancy type bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F for fancy type 15mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F for fancy type 15 mm bore angle stop valves,chromium plated cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F for angle valve 15mm bore brass chromium plated with captan head screwed for iron pipe complete all as specified and directed.

S&F for PVC connection 15mm size 450mm long with PTMT nuts complete all as specified and directed.

S&F for Brass chromium plated tubular towell rail 20 mm dia , D type , 600mm long between flanges fixed with & incl chromium plated brass screws and wooden /plastic cleats complete all as specified and directed.

S&F for Vitreous china wash basin, size 550 x 400mm white including brackets, and waste coupling & pipe of 32mm dia, brass, chromium plated for glazed ware sinks, basins white or tinted, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed complete all as specified and directed.

S&F standard PVC waste pipe 32mm dia ,complete for WHB complete all as specified and directed.

S&F for PVC Flushing cistern 10 Ltr capacity valveless syphonic action type low level, white, with inlet ,ball valve float and handle including brackets and flush pipe complete all as specified and directed.

S&F for 32 mm dia waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F 100mm dia stainless steel gratings without hole /with hole of min weight 50 gms complete all as specified and directed.

S&F for Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified

S&F for sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F for Vitreous china wash down water closet (Pedestal pattern, ETWC), white (including fixing bolts, Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F for vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap, with trap set and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specified and directed.

Demolition of reinforced concrete of any description and any poisition not otherwise specifically provide ( reinforcement cut to faciliatate demolition) complete all as specified and directed.

M&L precast reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggegrate) as in Chullah hood chajja and manhole cover, kitchen shelves etc set in cement mortar 1:4.including all neccesary formwork & finishing exposed concrete surface complete all as specified and directed.

Cutting chases ,pinning in brick work girth exc 10cm but n exc 20 cm and making good to facing where required and poining ein cement mortar 1:3 to ends of edges of landing, sun shades, chajjas, shelves etc

S&F mild steel TMT bars No 500D 6 to 8 mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing clips complete all as specified and directed.

S&F Point wiring with cable of PVC insulated FRLS copper multistranded conductor 1.5 sqmm 1100 volts grade in and including heavy grade PVC Casing Caping Pipe ISI marked with all accessories and fixing arrangements on wall/ceiling/floor etc. including fixing top cover /PVC junction boxes fixing on wall surface for housing switches/sockets/regulators etc. with and including 1.5 sqmm PVC insulated multistranded copper earth continuity conductor connecting to the common earth dolly etc complete all as specified and directed for the following :-

One light point controlled by one way switch.

Ceiling/ Exhaust fan point controlled by one way switch.

One 3 pin socket point 5 Amps on independent board.

One 3 pin socket point 5 Amps on Same board.

One Bell point controlled by one single pole 5 Amps switch

All as per item No 104.00 here-in-before but using copper conductor 2.5 sqmm PVC insulated unsheathed FRLS cable with copper conductor size 1.5 sqmmm PVC insulated unsheathed continuous earth continuity for 3 pin 15 amps socket outlet independently.

S&F modular type single pole 1 way 5 Amp 230 volt complete all as specified and directed.

S&F socket combination 6 Amps modular type, 230 volts grade complete all as specified and directed.

S&F Socket combination 6A/16A - modular type 230 volts grade with frame and cover complete all as specified and directed.

S&F switch modular type single pole 1 way 16 Amp 230 volt complete all as specified and directed.

S&F ceiling rose surface backelite two to three terminal complete complete all as specified and directed.

S&F modular type fan regulator upto 300 watts with 5 step speed control for fans any sweep 1200 mm/1400 mm complete all as specified and directed. .

S&F Modular Bell push 6A, 1 module complete all as specified and directed.

S&F Buzzer, Ding Dong AC. 230 volts, single pole complete all as specified and directed.

S&F modular white cover suitable with frame 1/2 module complete all as specified and directed.

S&F modular white cover suitable with frame 3 module complete all as specified and directed.

S&F modular white cover suitable with frame 4 module complete all as specified and directed.

S&F modular white cover suitable with frame 6 module complete all as specified and directed.

S&F modular metal flush board 1/2 module complete all as specified and directed.

S&F modular metal flush board 3 module complete all as specified and directed.

S&F modular metal flush board 4 module complete all as specified and directed.

S&F Sub main wiring with Two single core PVC insulated FRLS cable with copper conductor multistranded 1100 volts grade 2.50 sqmm in and including non-metallic rigid PVC casing and capping and accessories and fixing arrangements fixed to surface on wall, floor or ceiling etc including 2.50 sqmm PVC insulated FRLS multistranded copper earth continuity conductor and connecting to main earth dolly complete all as specified and directed. Note : One run of earth continuity conductor,one run of PVC casing capping and two run of copper conductor together taken as one length for measuring unit length.

S&F in repair Exhaust fan, steel body AC Single of size 300 mm sweep with blades and frames, louvers complete voltage 230 volts, 50 HZ complete all as specified and as directed.

S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

S&F in repair LED recess luminaires 600 x 600 mm (2'x2') 35/36 watts, 220 V, AC recessed/surfaced type with high efficency PMMA difuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling E55 complete all as specified and directed.

S&F in repair LED Light fitting of 1 x 20 Watts, 220 volts, AC decorative box type with driver, holder including LED tube light connecting up with 3 core flexible copper conductor cable of suitable size from Ceiling rose complete all as specified and directed.

S&F in repair LED Light fitting of 1 x 10 Watts, 220 volts, AC decorative box type with driver, holder including LED tube light connecting up with 3 core flexible copper conductor cable of suitable size from Ceiling rose complete all as specified and directed.

ITEMS APPLICABLE FOR JOB 'B':-

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified & directed.

Excavation in trenches not exc 1.5m wide and not exc 1.50 mtrs in depth for foundations etc and getting out in hard/dense soil complete all as specified & directed.

M&L PCC 1:4:8 type D-2 (using 40mm graded stone aggregates) in foundation, fillings and mass concrete complete all as specified and directed.

Use and waste of form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished flat surfaces of concrete complete all as specified and directed.

Use and waste of form work to sides of pillers, posts, struts,piers, columns and stanchions for rough finished flat surfaces of concrete, square, rectangular or polygonal, complete all as specified and directed.

S&F TMT Bars 5mm dia and over upto and including 10mm dia , cut to length, bent to shape required, inculding cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (ennealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L Reinforced cement concrete (nominal mix) type B1 (20 mm graded aggregate) 1:1.5:3 in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L Reinforced cement concrete (nominal mix) type B1 (20 mm graded aggregate) 1:2:4 in Columns, pillars, piers, posts and struts complete all as specified and directed.

Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25cm in hard/dense soil complete all as specified and directed.

Removing excavated material (soil) 500M but n exc 1.5 Km and depositing where directed at a level not exc 1.50M above the starting point complete all as specified and directed.

M&L for Providing precast cement concrete solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) type C1, 1:3:6 using 20 mm graded aggregate and setting in mortar 1: 6 , complete in walls all as specified.

M&L for 20mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid in vertical surfaces with over 10 mm thick rendering of cement mortar 1:4 and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

M&L for coloured designed chequered cement concrete tiles of a size 300x300x25mm thick with grey cement & pigment in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15 thick screed bed of CM 1:6 complete all as specified and directed.

Excavation in trenches not. exc. 1.5m wide and not exc. 1.5m deep and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in,including spreading, levelling ,watering and well ramming in layers not exc 25cm thick in soft/loose soil complete all as specified and directed.

Removing surplus soil to a distance not exc 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and directed.

Supplying and laying un-reinforced precast concrete cable cover class LV, Type 1, flat, size 250x150x40 mm complete all as specified and directed.

Supply and laying in trenches /laid in floor/duct/drawn through conduit XLPE insulated,screened, PVC bedded, galvanized steel strip or wire armoured heavy duty electric cable 1100V grade with aluminum conductor of cross sectional area 10 sqmm 2 core complete with lugs complete all as specified and directed.

S&F 50 mm dia galvanized iron tube light grade for cable protection, supporting to poles, plinth protections, road crossing, trenches, footpath etc,fixing with garden light including clamps, nut bolt and washers complete all as specified & directed.

S&F in wall PVC cable loop box,size not less than 200 mm x 140 mm x 95 mm, out door type, IP 65 including 2 Nos aluminum bus bar of size 25mmx5mm mounted on porcelain insulators with one MCB SP 6 amps 230 volts connected to street light fitting sub main wire and using FI clampsof size 20mm x3 mm for fixing of PVC cable loop box with pole,including nuts,bolts & washers and connecting the cables to bus bars with using suitable size GI nut, bolts and washers and aluminum lugs etc and complete all as specified & directed.

S&F two core PVC insulated FR cable with multistranded copper conductor of size 1.5 sqmm cross sectional area, 1100 Volts grade, complete all as specified and directed.

S&F LED post-top light fitting 40 watts made in spherical shape polycarbonate opal and clear diffuser with IP 65/66 protection, complete all as specified & directed. Make Bajaj BGCTNP 40W LED WH/ WW or techno-commercially equivalent make of Havells,CG.

S&F Rigid non-metallic PVC Conduit pipe inclusive of all tees, bends, elbows, reducers, of size 25 mm dia complete all as specified and directed.

ITEMS APPLICABLE FOR JOB 'C':-

Excavating in post holes (or similar holes) in soft/loose soil each n exc 0.5 cu m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exceeding 25 cm complete all as specified and directed.

S&F rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) Fe-410-W (Gde-E-250) quality-A) including distance pieces, cleats etc complete all as specified and directed.

S&F Mild steel screw bolts, diameter of neck in 16 to 20mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 10cm and n exc 15cm long complete all as specified and directed.

M&L for two coats of synthetic enamel paints over a coats of red oxide primer including prepration of new steel surfaces of any description over 10 cm in width or girth not otherwise described complete all as specified and directed.

S&F pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed by Engineer-in-charge.

S&F Pre-painted galvatume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall or in door, fixed with self tapping screws complete all as specified and directed.

S&F Prelaminated particle board, 18/19mm thick exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

S&F 40mm width of flap (when open) continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed.

S&F in repair ball catcher with 8 mm dia steel ball and brass body and striking plate including letting in and fixed complete all as specified and directed.

S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of brass polished, complete all as specified and directed.

M&L for 40mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded stone aggregate) complete all as specified and directed.

M&L for Plain Cement Concrete Type C1 1:3:6 (using 20 mm graded stone aggregate) cast in situ in cills and other similar bands, plinth courses, parapets, copings, hold fast ,bed plates and the like including use and waste of form work,weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

M&L for preparing of old chequered tiled and Paverblock surfaces/existing footpath by removing all the caked mud with wire brushes and cleaning surfaces with necessary acid and description not otherwise described and applying one coat of weather proof tile guard apex paint or equivalent of any colour complete all as specified and directed.

M&L Machine pressed precast conctete glossy finish interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade laying, set, jointed in neat cement slurry and pointed with grey cement mixed with pigment to match complete all as specified and directed.

Relaying of Machine pressed precast conctete glossy finish interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade laying , and levelling and relaying the same tile acomplete all as specified and directed.

Removing building materials etc.to a distance of 20.0 km , beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed.

EURO ENTERPRISES (BID ID -3087924)

raashi constructions (BID ID -3086773)