SPL REPAIR OF EXISTING DRAIN FROM T-26/28 CH TO MAIN ROAD OF 4015 FD HOSP, SPL REPAIR TO TOILET BLDG NO P-410,P-411 AND P-420 OF 25AD REGT AND PROVN OF BATHROOM AND TOILETS WITH ALLIED INFRA FOR TROOPS 950 AD REGT WKSP (MOB) AT OAF UNDER GE 970EWS

Amount

Excavation in trenches not exc 1.5 mtr wide and not exc. 1.5 mtr in deep for sewage lines/manholes etc.n.exc 10 sqm on plan and gettingout any type of soil.

M&L for providing Cement concrete 1:4:8 type D2 using 40mm graded Aggregate for foundation and mass concrete including demilition of any description and in any position not other wise specifically provided for all as specified and directed by Engr-in-charge.

M&L for providing Cement concrete 1:2:4 type B2 using 40mm graded Aggregate as in surface channels and drains as directed.

M&L for brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 for walls including demolition of brickwork or stone/boulder masonery all as specified and as directed by Engr-in-charge.

M/L for rendering 15 mm thick in CM(1:4) on brick, stone or concrete wall surfaces of any description, and finishing the surfaces finished even and fair complete all as specified and as directed.

M&L for providing Cement concrete 1:2:4 type B1 using 20mm graded Aggregate in cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed.

Returning filling including spreading watering and well ramming in layers n.exc 25cm thick in any type of soil.

Removing excavated soil to a distance of exc. 250 m but n exc. 500 m depositing where directed at low lying area as directed by Engr in charge.

Removing excavated material of soils from site to a distance not exc 50mtr away and depositing where directed not exc 1.5mtr from the starting point.

Extra for forming fair finished channel or drain 30cm inner girth or part therein in cement concrete using extra cement including mitred/stopped ends, forms mould etc, complete.

Extra for forming fair finished channel or drain 60cm inner girth or part therein in cement concrete using extra cement including mitred/stopped ends, forms mould etc, complete.

M&L for providing cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in Concrete bed to 450 mm drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested all as specified and directed.

S&F reinforced concrete pipe 450 mm dia, class NP3, laid and jointed complete with collars all as specified and directed.

S&F 60mm thick coloured precast cement concrete interlocking paver block of required shape and size made with electrovabro technology conforming to IS of M-35 grade laid over with and including 50mm thick dry sand cushion complete all as specidied and directed by Engr-in-Charge.

M&L PCC 1:2:4 type B0 (12.5mm graded aggregate) in mud stops rounded or chamfered on edges of tiles complete all as specified and directed.

M&L Reinforced NP2 pipe of 100 mm dia laid in trenches and jointed on concrete bed including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 with and including demolition and breaking up existing drain pipes of any description ( like PVC, salt glazed ware, AC or reinforced concrete) set in cement mortar complete all as specified and directed by Engr-in-Charge.

M&L Reinforced NP2 pipe of 150 mm dia laid in trenches and jointed on concrete bed including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 with and including demolition and breaking up existing drain pipes of any description ( like PVC, salt glazed ware, AC or reinforced concrete) set in cement mortar complete all as specified and directed by Engr-in-Charge.

Cutting into existing manhole removing existing drain making good to wall and rendering cutting out branch channel and making good benching for 100mm dia pipe in cement concrete 1:2:4 complete all as specified and directed by Engr-in-Charge.

Description all as per ser item No 18 above but 150mm dia

M&L rendering 15 mm thick in CM 1:4 with and including mixing of liquid WPC of approved make @ 200ml per bag of cement on brick/concrete/stone wall surfaces of any description, and finishing the surfaces even and fair complete complete all as specified and directed by Engr-in-Charge.

M&L for precast RCC 1:2:4 Type-B1 (using 20mm graded crushed stone aggregate) as in manhole cover slab and similar article with plain faces, set in cement 1:4 including demolition of any description in any position not other wise specifically provided for complete all as specified and directed by Engr-in-Charge.

S&F TMT Mild Steel bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-Charge..

Description all as per ser item No 22 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders

Taking down chowkats or frames with shutter (without taking off shutter from the frames) n. exc 1.50 Sqm each complete all as specified and directed by Engr-in-Charge.

S&F factory made solid PVC door Frame of size 50 mmx47 mm made out of 5mm thick wood grain printed PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with printed sheet reinforced MS square tube supplying & fixing in opening as per specification & drawing complete all as specified and directed by Engr-in-Chage.

S&F factory made solid PVC moulded door shutter 28 to 30 mm thick (stiles) with 2,4, or 6 raised panel design with 2mm thick Moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specifications and drawing of page no 146 of SSR Part -II complete all as specified and directed by Engr-in-Charge.

S & F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and directed.

S&F figured glass 4.00 mm thick, pin head type and glazing with oil putty in squares, rectangle exc 0.5 Sqm in each pane complete all as specified and as directed and directed by Engr-in-Charge.

S&F Stainless Steel butt hinges medium weight of size 100 mm fixed with stainless screws complete all as specified and directed Engr-in-Charge.

S&F 200mm size aluminium anodised, barrel tower bolt of extruded section complete all as specified and directed by Engr-in-Charge.

S&F Extruded aluminium alloy handles 150 mm long fabricated type anodised complete all as specified and directed .

M&L two coats of synthetic enamel paint over a coat of red oxide primer after preparation of new steel surfaces of any description over 10cm in width and girth complete all as specified and directed by Engr-in-Charge.

Demolition of unreinforced cement concrete in ground floors and paving n. exc 15cm thickness (below or above ground level) complete all as specified and directed.

Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed by Engr-in-Chage.

M&L for 75mm thick (1:3:6) Type-C-2 (using 40mm graded crushed stone aggregate) as in plinth protection or paving, finishing cement concrerte surface even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for 75mm thick PCC (1:4:8) type-D2 (using 40mm graded crushed stone aggregate) as in sub base of flooring complete all as specified and directed by Engr-in-Chargre.

M&L for 25mm thick (1:2:4) Type-B-1 (using 12.5mm graded crushed stone aggregate) as in sub base of flooring complete all as specified and directed by Engr-in-Chargre.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L non skid coloured designer ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15mm thick screed bed in CM (1:6) compete all as specified and directed by Engr-in-Charge

Description all as per ser item No.40 above but on skirting over with and including 10mm thick backing coat in CM 1:4 complete all as specified and directed by Engr-in-Charge.

M&L anti skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15mm thick screed bed in CM (1:4) compete all as specified and directed by Engr-in-Charge

M&L glazed ceramic coloured, designer & pattern (dark & light shade combination) tiles in 350x250x7 or 450x350x7 or 450 x 300 x 7-8 mm thick on vertical surfaces such as dado etc set and jointed in neat cement slurry and pointed in white or colour cement to match over with and including 10mm thick backing coat in CM 1:4 and dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

12. M&L Providing, precast cement concrete (type B-1 1:2:4, using 20 mm graded stone agg) in manhole cover and shelves with plain fair faces, including chamfering, weathering, throating etc. and setting in mortar 1:4 complete all as specified and directed

M&L rendering 15 mm thick in CM 1:6 on brick/concrete/stone wall surfaces of any description, and finishing the surfaces even and smooth without using extra cement complete with and including taking down cement or lime plaster of any description from stone /brick/concrete wall etc incl raking out joints hacking for key scrurbbing down with water and disposing of the rubbish complete all as specified and directed by Engr-in-Charge.

M&L rendering 15 mm thick in CM 1:4 with and including mixing of liquid WPC of approved make @ 200ml per bag of cement on brick/concrete/stone wall surfaces of any description, and finishing the surfaces even and fair complete with and including taking down cement or lime plaster or racking of pointing and scrubbing out existing finishes on wall of any for three storey bldg incl all necessary arrangement like scaffolding and masonry complete all as specified and directed by Engr-in-Charge.

M&L brick work with sub class 'B' bricks straight or curved in plan exc 6 mtr mean radius built in CM (1:6) using old size bricks with and including demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engr-in-Charge.

M&L brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick wall built in CM 1:4 with and including demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engr-in-Charge.

M&L preparing new/old plastered surface of walls and applying two coats of cement based paint over a coat of cement base primer complete all as specified and directed complete all as specified and directed by Engr -in-Charge..

M&L three coats of white wash on new/old plastered surfaces of ceiling including preparation of surfacces complete all as specified and directed by Engr-in-Charge..

S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering /cladding to wall, fixed with self tapping screws complete with and including dismantling corrugated steel sheeting, any gauge, thickness, including nainital or similar roof coverings complete all as specified and directed.completed all as specified and directed by Engr-in-Charge.

S&F for pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering /cladding to wall, fixed with self tapping screws as in ridge,eaves boards, hips, velly gutter drip and straight flushing of reuired machine moulded shape and size complete with and including dismantling plain steel sheeting, any gauge, thickness, including nainital or similar roof coverings and eaves boards of any description complete all as specified and directed.completed all as specified and directed by Engr-in-Charge.

M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed by Engr-in-Charge.

S&F 15 mm dia steel water GI tube medium grade with all fittings and fixed with walls, ceilings or laid in floors complete with and including taking up or down 15 mm bore steel water tubing and connections complete all as specified and directed by Engr-in-Charge.

S&F 20 mm dia steel water GI tube medium grade with all fittings and fixed with walls, ceilings or laid in floors complete with and including taking up or down 20 mm bore steel water tubing and connections complete all as specified and directed by Engr-in-Charge.

M&L Lagging to pipes used in internal water supply (internal dia of pipe 20mm) or plumbing all round with,25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 all as specified and directed by the Engr-in-Charge.

Re-fixing old 15mm dia steel water GI tube medium grade with all fittigs / connection in new or old position and fixed with concealed to walls, ceilings or laid in floors complete with and including taking up or down 15 mm bore steel water tubing and connections complete all as specified and directed by Engr-in-Charge.

Re-fixing old 20mm dia steel water GI tube medium grade with all fittigs / connection in new or old position and fixed with concealed to walls, ceilings or laid in floors complete with and including taking up or down 20 mm bore steel water tubing and connections complete all as specified and directed by Engr-in-Charge.

S&F in repair vitreous China, squatting pan, Orissa Pattern, size 630 x 450 mm white, with integral foot rests (excluding flushing cistern and flush pipe) with CI trap of suitable size ( P or S type) including connection to trap and to flushing pipe, anti syphonic pipe etc complete including provision of lime concrete bedding & making good to floor complete complete all as specified and directed including taking out old one.

S&F in repair 10 Ltr capacity PVC valveless syphonic action type flushing cistern low level white, with inlet, ball valve, float and handle including PVC flush pipe and brackets complete fixed in wall and floor to trap of WC as required and as directed.

S&F in repair 15 mm bib tap ( fancy type) , cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed including taking down old one.

S&F in repair Stop valves of size 20mm dia (half turn type) , cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed including taking down old one.

S&F in repair single/multi PVC (SWR) floor trap 75mm to 110mm dia, palin with grating including joining to waster pipe, fixed in cement concrete type B-1 (1:2:4) using 20mm graded broken stone aggregate complete all as specified and directed by Engr-in-Charge.

S&F in repair 15 mm dia PVC connections, 600 mm long with PTMT nuts of suitable size at two end complete all as specified and directed including taking out old one.

S&Fin repair towel rail 600 mm long of PTMT fixed with and incl Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190 gms).

S&F in repair 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls/floors with necessary MS clamps including taking down old pipes all as specified and as directed

S&F 75 in repair mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls/floors with necessary MS clamps including taking down old pipes all as specified and as directed

S&F in repair 110 mm PVC (SWR) access door bends any radius all as specified and as directed

S&F in repair 75 mm PVC (SWR) access door bends any radius all as specified and as directed

S&F 110mm PVC (SWR) junction single,(Single T) equal or unequal provided with access door complete all as specified and directed by Engr-in-Charge.

S&F 75mm PVC (SWR) junction single,(Single T) equal or unequal provided with access door complete all as specified and directed by Engr-in-Charge.

S&F 110mm PVC (SWR) vent cowl complete all as specified and directed by Engr-in-Charge.

M&L for providing Cement concrete 1:4:8 type D2 using 40mm graded aggregate for foundation and mass concrete complete all as directed by Engr in charge.

M&L for old size brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 for walls all as specified and as directed by Engr-in-charge.

M&L for rendering 10mm thick on fair faces of brick or stone masonary in CM (1:6) finished even and smooth without using extra cement with including preparation of newly plastered surfaces of walls and apply three coats of white wash complete all as specified and as directed.

M&L Hardcore of gauge of broken stone or boulders n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface

M&L for 75 mm thick PCC type D2 (1:4:8) 40 mm graded stone aggregate as in sub bases of floor over laid 25mm thick PCC type B-0, 1:2:4 using 12.5mm graded aggregate to make the surface on level complete all as specified and directed

M&L coloured glazed ceramic tiles in vertical surface 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM (1:4) all as specified and directed.

S/F roof trusses (framed), trussed, purlins, Beam,HF, tee, angle, channel or flat sections including distance pieces, cleats etc. confirming to FE - 410 W(Gde E-250) Quality B complete all as specified.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other each screwed end to be fitted with washers and one hexagonal or square nut, n exc 30cm long & dia of neck 16 to 20 mm complete all as specified.

S&F 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with J or L type hooks in roofs, walls etc. with grade of zinc coating 275 all as specified.

S&F 0.80mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip, eave boards and straight flashings (length and girth as fixed) with grade of zinc coating 275 all as specified.

S&F 12mm thick Gypsum board fixed in anodised aluminium snap grid 605 X 605mm frame work as in false ceiling including hangers 4mm dia GI (up to 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40X3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long fixed complete all as specified and as directed.

S&F 100mm long Butt hinges, extruded brass with galvanised mild steel hinge pin, anodised and fixed, type B-11 complete all as specified.

S&F aluminum anodised barrel tower bolts of extruded section 150mm long complete all as specified and as directed.

S&F aluminum anodised bow handle fabricated type extruded section of 150mm long complete all as directed

S&F 300 mm dia Aluminium alloy, anodised, sliding door bolt dia of bolt not less than 16 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed

S&F PVC (SWR) pipes 110 mm dia, in any length , single socketed, jointed with rubber ring joints fixed to walls complete all as specified and directed

M&L concrete bed to drain pipes to 110 mm bore pipe in CM 1:4:8 type D-2 including packing under, and hunching against the sides of pipes after they are laid and tested in complete all as specified and directed

S&F PVC (SWR) pipes 110 mm dia, in any length , single socketed, jointed with rubber ring joints, laid in trenches/ floors complete all as specified and directed

Description all as per ser item No 92 above but 75 mm dia complete all as specified and directed

S&F PVC (SWR) bends, 75 mm bore, any radius complete all as specified and directed.

M&L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

S&F HDPE rotational moulded polyethylene water storage tank of 500 liters capacity (cylindrical, vertical with closed top) hosted and fixed ,with and including float valve 20mm, ball brass valve, high pressure with polythene float and fly nut and fixed in position all as specified.

S&F CP stop/angle cock 15mm bore fancy type complete all as specified and directed

S & F Vitreous China wash down water closet pan (Pedestal pattern), white (ETWC) with ‘P’ or ‘S’ trap, including connection to drain or outgoing pipe and including with 10 ltr capacity PVC flushing cistern, including brackets for flush tank, PVC connection 450mm long and 15mm dia to flushing cistern/ sanitary fittings with PTMT nuts of length 450mm and all necessary fittings, inlet, outlet pipe connections, and plastic water closet seat cover, closed pattern with recessed bottom cover and mild steel chromium plated hinge all as specified and directed.

S&F for vitreous China wash basin, white, flat back, size630x450mm excluding ditto but including brackets with and 32mm bore waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm- 45gms/40mm-60 gms), fitted in 15mm size PVC connection 450mm long complete all as specified and directed.

M&L 15 mm bore bib cock long nose with wall flange complete all as specified and directed

S&F 15mm bore GI water tubing medium grade fixed in complete to walls and ceilings or laying in floors complete all as specified and directed.

Description all as per ser item No 101 above but 20 mm bore.

Excavation in post holes (or similar holes) each n.exc 0.5 cum in any type of soil, getting out, returning, filling in & ramming earth or broken rubbles mixed with earth around in layers n.exc 25 cm complete all as specified and directed

S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends class -1 ISI marked of size 20mm dia for iron pipe and fixed all as specified.

S/F compound girders staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc confirming to FE - 410 W(Gde E-250) Quality B complete all as specified and directed

S&F Vitreous China bowl urinal flat back, size 465 x 355 x 265mm, wgite, with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

S&F aluminium anodised louvered ventilator using rectangular tube of size 63.50 x 25 x 1.50 mm including 4 mm thick froasted glass and fixed with mosquito frame with jalli complete all as specified and directed .

S&F in repairs toilet fittings Continental / Queens Series, brass chromium plated for centre hole basin mixer w/o pop up waste system in 15mm dia.

S&F in repairs toilet fittings Continental / Queens Series, brass chromium plated for Wall mixer telephonic with crutch and fitted for hand shower in 15mm dia.

S&F in repair health Faucet with wall hooks and one mtr tube full brass, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs CP toilet paper holder with necessary fittings, complete all as specified and directed.

Taking down old and unserviceable, distribution board any type including/ sheet metal enclosures, after removing all connection and make good the disturbed surface all as directed by Engr-in-chanrge

Taking down and M&L for Point wiring using FRLS PVC insulated unsheathed, multistranded copper conductor cable 1.5 sqmm drawn through and including PVC conduit of min 20 mm dia by Cutting chases for conduits and sinking's for boxes and making good to walls, floors etc for concealed conduit wiring with modular flush box metal of GI sheet of 1 to 1.8 mm thick with earth terminal for safety, flush metal GI box of required modules as per site requirement and modular plate with support frame white in colour of required modules, 3mm thick including all fittings i.e. tees, bands and junction boxes, screws etc. complete for One light/Fan point controlled by one switch 6 Amps one way using cable (1.5 Sq mm for phase and neutral and 1.5 sq mm earthing) Note:- (a) wiring shall be done by using colour coding RYB pattern. (b) Earth wire shall be of green colour.(c ) Conduit for Concelaed wiring will be 20 mm dia and upto 25mm where ever required.(d) Cutting chasing including making good to the existing surface is also included in the unit rate quoted (e) Complete material for modular wiring like inner plate ,outer cover ,suitable screws etc are included in the unit rate quoted .(Make for Modular items Legrand, Havells, Anchor by Panasonic ,GM Modular,ABB and make of wire and accessories Finolex,Havells, KEI industries LTD,Plaza Cables )

Description all per ser item No 113 above One 3 pin socket outlet, 5/6 Amp socket outlet on same board with other switches.

Description all per ser item No 113 above but One 3 pin socket outlet, 5/6 Amp socket outlet on independent board.

Taking down and M & L for point wiring to one 3 pin 15/16 Amps socket outlet independent switch board, using FRLS PVC insulated unsheathed, multistranded copper conductor cable 2.5 sqmm drawn through and including PVC conduit of min 20 mm dia by Cutting chases for conduits and sinking's for boxes and making good to walls, floors etc for concealed conduit wiring with modular flush box metal of GI sheet minimum 1.2 mm thick with earth terminal for safety, flush metal GI box of required modules as per site requirement and modular cover plate with support frame white in colour of required modules, 3mm thick including all fittings i.e. tees, bands and junction boxes, screws etc. complete for power point controlled with cables, 2.5 sq. mm size, Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate complete. (2.5 Sqmm for Phase and neutral and 2.5 Sqmm for earthing)

M&L in replacement switch Modular type 6 Amps 1 Way,1 module, 230V AC complete all as specified and directed by Engineer in charge.

M&L in replacement Modular socket outlet 16 Amp universal socket 2 module complete all as specified and directed by Engineer in charge.

M&L in replacement switch Modular type 16 Amps 1Way, 1 module with modular plate light marking 230V AC complete all as specified and directed by Engineer in charge.

Supply and fixing in repair Ceiling rose, 3 phase/PVC/polycarbonate, isolated body type complete all as specified and directed.

M&L in replacement Modular socket outlet 2/3 pin 6 Amp socket 2 module complete all as specified and directed by Engineer in charge.

S & F Energy efficient surface Mounted LED Luminire 22 watts 4' long, with acrylic cover complete with all accessories incl necessary two core copper wire for connection from ceiling rose to connector of approx length 0.75 mtr all as directed.

Supply and fixing Ventilating Fan 250 mm sweep, 1200 RPM, non metallic resin body, single phase 240 volts AC 50 Hz and connecting up complete including louvers and provision of copper cable 3 core of size 0.5 sqmm for connection from ceiling rose to fan complete all as specified and as directed.

S & F MCB DB SPN 8 way, 230 Volt with 200 A rated bus bar double door type modular type complete all as specified and as directed.

Supply and fixing rating 240V, 10KA 'C'curve miniature circuit breaker (MCB) SPN and current carrying capacity 40 Amps in the MCB DB complete with connection testing and commissioning

M & L for sub main wiring with two runs of single core 4 Sqm, FRLS Copper conductor PVC insulated unsheathed cable as per IS 694-1990 (third revision) drawn through & including non- metallic rigid PVC casing caping (double interlock type) of suitable width medium duty with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall along with one run of 2.5 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board/ distribution board and testing on completion etc complete all as directed. (Note :- Two runs of cable, one run of earth continuity conductor and one run of PVC casing caping/conduit shall be measred as one unit)

Supply and fixing rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SP and current carrying capacity 5-32 Amps in the MCB DB complete with connection testing and commissioning

M & L for one point wiring with PVC insulated un-sheathed cable with stranded copper conductor FR-LS conforming to IS : 694 of size 1.5 Sq mm single core, including one No. 1.5 Sq mm single core PVC insulated un-sheathed copper cable FR-LS as continuous earth wire drawn in and including , ISI marked medium grade Non metallic rigid PVC Conduit not less than 20 mm dia as per ground requirement with all accessories of same grade fixed on wall/ceiling including terminated in to Cast iron/pressed steel terminal box of required size made out of 2mm thick MS sheet duly painted both sides or PVC box ISI marked with 3 mm thick plastic laminated sheet top cover fixed with brass screw & cup washers for mounting switches, fan regulators etc for one light/fan/exhaust fan point controlled by one 5 Amp switch one way complete all as specified and as directed Note :- cutting of wall and making good to the surface are also included in the unit rate quoted.

Description all per ser item No 128 above but for one exhaust fan/Lt point complete all as specified and as directed

Description all per ser item No 128 above but for one 3/5 Pin, 15 Amp Switch socket combination on independent board by using 4 sq mm wire complete all as specified and as directed

Description all per ser item No 128 above but for one 3/5 Pin, 5 Amp Switch socket out let on the same board complete all as specified and as directed

S & F Switch Piano flush button single pole one way 5 A , 240 V complete all as specified and as directed

S & F Switch Socket Combination 5A/16A, 5 in 1, 3 pin, 240 volts complete all as specified and as directed

S & F MCB SPN 32/40 amps 230 volts C curve, 50 HZ AC 10 KA complete all as specified.

S & F MCB SP 06 to 32 amps 230 volts C curve, 50 HZ AC 10 KA complete all as specified.

S & F Energy efficient surface Mounted LED Luminire 1X10 watts 2' long, with acrylic cover complete with all accessories incl necessary two core copper wire for connection from ceiling rose to connector of approx length 0.75 mtr all as directed.

M&L for Earthing complete with GI earth plate 60x60cmx6mm thick, burried directly in ground (Earth pit not less then 2.25 metres deep below ground level) with top edge of the plate not less then 1.5 metre below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron as earthing lead or steel all as shown in electrical plate No.5 and incl earth work, PCC pit and RCC cover, watering pipe 20mm dia medium grade, funnel, wiremesh, charcoal dust, 15 mm dia light grade protection pipe and salt etc and connected to earthing test point incl necessary earth work complete all as specified and as directed.

S & F water heater storage type (Geyser) vertical type with suitable size of fastner and incl provision and connecting up of SS braided pipe with adopter for inlet and outlet water connection, having adjustable knob for temperature control and inner tank material of superior glass lined tank and outer body material ABS with high pressure with standing capacity upto 8 bar pressure complete all as specified of capacity 25 ltr having heating element 2 KW and not less than 5 star rating with minimum two year warrant on product.

Supply and laying of XLPE insulated,sheathed,armoured,heavy duty LT 1100 volts grade cable 10 Sqmm 2 core with aluminium conductor laid in trenches/pipes, fixed to poles/walls with suitable saddle complete all as directed.

M & L for Sand cushioning under ground cable 8 cm below and 15 cm above in trenches / cable duct filling complete in level all as specified.

M/L for brick well burnt locally available sub class 'B' laid over sand cushioning to cable in trenches keeping width of brick parallel to the length of cable complete all as specified and directed.

Supply & Fix Fun gun metal globe or gate valves, with iron wheel head screwed both ends for iron pepe of 50 mm bore and including cutting and connecting up with existing line by using sockets, bends etc complete, all as specified and directed by Engr-in-charge.

Supply and fixing MS Pipe with all fittings laid in floors or fixed to walls and ceilings etc of sizes 50mm

Supply and fixing MS Pipe with all fittings laid in floors or fixed to walls and ceilings etc of sizes 20mm

Notes :- Amount of Credit Schedule for Schedule 'A' Part-ll shall be deducted from total quoted amount of BOQ to arrive at the contract sum

M/S MEGA BUILDERS (BID ID -3471015)

M/S UTA MOTORS (BID ID -3466088)

M/S ABDUL KARIM RATHER (BID ID -3471338)