ENGINEERING, PROCUREMENT AND CONSTRUCTION (EPC) OF DEFICIENT OFFICERS MARRIED ACCOMMODATION (20 DUs, G PLUS 10 FLOORS) AT INS HAMLA, MUMBAI

Amount

SCHEDULE 'A' PART- I BUILDINGS & STRUCTURES INCLUDING INTERNAL & EXTERNAL SERVICES AS DEFINED IN ANNEXURE I TO XI (EPC)

Design & Construction of Def Officers Married Accn (G+10 Floors) for complete as detailed in scope of work and other documents of tender, complete all as specified and directed.

SCHEDULE 'A' PART IA (BUILDINGS & STRUCTURES WORKS) Total of Sch-'A' Part-IA B/F

SCHEDULE "A" PART-II (EXCAVATION & EARTHWORK) Total of Sch-'A' Part-II B/F

SCHEDULE 'A' PART-III (ROAD, HARD STANDING & CULVERT) Total of Sch-'A' Part-III B/F

SCHEDULE 'A' PART-IV (SEWAGE DISPOSAL) Total of Sch-'A' Part-IV B/F

SCHEDULE 'A' PART-V (AREA DRAINAGE) Total of Sch-'A' Part-V B/F

SCHEDULE 'A' PART-VI (EXTERNAL ELECTRIFICATION) Total of Sch-'A' Part-VI B/F

SCHEDULE 'A' PART-VII (EXTERNAL WATER SUPPLY) Total of Sch-'A' Part-VII B/F

SCHEDULE 'A' PART-VIII (RAIN WATER HARVESTING ) Total of Sch-'A' Part-VII B/F

SCHEDULE 'A' PART-IX (RETAINING WALL ) Total of Sch-'A' Part-IX B/F

SCHEDULE 'A' PART- X (MISCELLANEOUS ITEMS)

Removing excavated material (any type) and depositing it outside Ministry of Defence Land. Notes: (i) Before quoting the tender, the bidders are advised to ascertain the distance outside MD and, at which the excavated material/ debris are to be disposed off. No extra claim what-so-ever shall be entertained on this account. (ii) This item shall be considered as per the requirement at site. (iii) All excavation earthwork covered under Sch'A' part II to part IX shall be measured and paid under this item.

Supply, install, testing and commissioning HT 11 KV, 3 phase 50 Hz, indoor type, totally enclosed metal clad compact type (RMU) switchgear with vacuum circuit breaker having rupturing capacity 250 MVA, overload and earth fault protection, ammeter, voltmeter and of rating upto 400 Amp (01 nos At existing Sub Station) connecting with adapter panel complete all as specified and directed.

Supply and fix adapter panel rated 11 KV/630 Amps, 3 ph, with Copper Bus Bar (R-Y-B) for direct bus coupling to the existing RMU/ VCB on site with New VCB as per Ser No.11. Note: 1.Copper BUS BAR in the adapter panel shall be directy coupled to the RMU as well as new VCB with BUS-to- BUS coupling and not accepted by any cable or through HT fuse and contractor shall visit the site to inspect the RMU of Make ABB for manufacturing the adaptor before placing the order. 2. This item may not need to be operated if the contractor brings same make and same specifications RMU/ VCB to align with the existing VCB panel, without requiring adapter panel.

Supply, install, test and commission, Indoor type, LT panel box, cubicle type, factory fabricated, CPRI approved (any company from list of make), panel board made with 2 mm thick CRCA Sheet, weather and vermin proof, floor mounted, Class 7 tank process, powder coated in siemens grey colour inside and outside, 3 phase, 4 wire system copper bus bar mounted on hygroscopic insulator housed in separate bus bar chamber covered with R-Y-B and black PVC heat shrinkable sleeve, with 50mmx50mmx6mm angle iron frame with and including PCC 1:3:6 type C2 foundation and covering front and back opening hinged door along with suitable locking arrangement including necessary bus bar tappings, copper control wiring of required size, connecting cable with necessary cable glands, lugs etc, independent chamber to accommodate the MCCBs MCBs, measuring instruments, Bus bar and cable gallery chamber, proper arrangements for ventilation complete with provn for connecting earthing at both sides of panel board and comprises as following:- (MAIN PANEL)

BUSBAR 500 A rated copper bus bar with colour coded heat shrinkable sleeve INCOMER MCCB 4 pole 350 A, 415V, 50Hz, 50 KA - 01 No. OUTGOING i) MCCB 4 Pole,250 A, 415V, 36 KA - 1 No. (Bldg panel) ii) MCCB 4 Pole, 125 A, 415V, 25 KA - 1 Nos. (AMF PANEL +Spare) iii) MCCB 4 Pole, 100 A, 415V, 16 KA - 1 No. (APFC) METERING & INDICATION i) Ammeter, Digital type, with suitable CTs - 06 set ii) Voltmeter, Digital type - 01 set iii) R-Y-B phase indicating lamp - 03 Nos iv) Multifunction meter - 01

Supply and fixing APFC Panel with MD-XL capaciror and MCCB as incomer(Auto/Manual option) with 75 (25 x 2 + 1 x10 + 3x5) KVAR capacity complete all as specifed and directed.

Supply, install, test and commission, Indoor type, LT panel box ,cubicle type, factory fabricated, CPRI approved ( any company from list of make), panel board made with 2 mm thick CRCA Sheet, weather and vermin proof, floor mounted, Class 7 tank process, powder coated in siemens grey colour inside and outside, 3 phase, 4 wire system copper bus bar mounted on hygroscopic insulator housed in separate bus bar chamber covered with R-Y-B and black PVC heat shrinkable sleeve, with 50mmx50mmx6mm angle iron frame with and including PCC 1:3:6 type C2 foundation and covering front and back opening hinged door along with suitable locking arrangement including necessary bus bar tappings, copper control wiring of required size, connecting cable with necessary cable glands, lugs etc., independent chamber to accommodate the MCCBs MCBs, measuring instruments, Bus bar and cable gallery chamber, proper arrangements for ventilation complete with provn for connecting earthing at both sides of panel board and comprises as following:- (BLDG PANEL)

BUSBAR 300 A rated copper bus bar with colour coded heat shrinkable sleeve INCOMER MCCB 4 pole 200 A, 415V, 50Hz, 16 KA - 01 No. OUTGOING i) MCB 4 Pole, 20 A, 415V, 16 KA - 20 Nos. (for Each Qtr) METERING & INDICATION i) Ammeter,Digital type, with suitable CTs - 06 set ii) Voltmeter, Digital type - 06 set iii) R-Y-B phase indicating lamp- 06 Nos iv) Multi function meter with suitable CT's -01 No.

Supply, install, test and commission, Indoor type, LT panel box, cubicle type, factory fabricated, CPRI approved (any company from list of make), panel board made with 2 mm thick CRCA Sheet, weather and vermin proof, floor mounted, 7 tank process, powder coated in siemens grey colour inside and outside, 3 phase, 4 wire system copper bus bar mounted on hygroscopic insulator housed in separate bus bar chamber covered with R-Y-B and black PVC heat shrinkable sleeve, with 50mmx50mmx6mm angle iron frame with and including PCC 1:3:6 type C2 foundation and covering front and back opening hinged door along with suitable locking arrengement including necessry bus bar tappings, copper control wiring of required size, connecting cable with necessary cable glands, lugs etc, independent chamber to accomodate the MCCBs MCBs,measuring instruments,Bus bar and cable galley chamber, proper arrangements for ventilation complete with provn for connecting earthing at both sides of panel board and comprises as following:- (UTILITY PANEL)

BUSBAR 200 Amps copper bus bar with colour coded heat shrinkable sleeve INCOMER i) MCCB 4 Pole, 125 A, 415V, 36 KA - 1 No. I/C OUTGOING i) MCCB 4P 63 A -01 Nos (W/S Panel ) ii) MCCB 4 Pole, 32 Amps - 1 Nos. (lift DB-1) iii) MCCB 4 Pole, 25 Amps - 1 Nos. (lift DB-2) iv) MCB TPN 40 A -01 Nos (Street Light) v) MCB SPN 32 A- 04 NOS( Comn Area+M/c Room+Sub stn Light+spare) vi)Digital timer switch-01 nos METERING & INDICATION i) Ammeter,Digital type, with suitable CTs - 06 set ii) Voltmeter, Digital type - 01 set iii) R-Y-B phase indicating lamp- 03 Nos iv) Multi function meter with suitable CT's -01 No.

M&L for 7 meter long hot dipped galvanised octagonal poles with top A/F 70 mm bottom A/F 155 mm made out of 3mm thick HT sheet along with base plate of size 260X260 X16 mm including 1500 mm long single arm bracket made out of 48 mm dia GI pipe and M20 x700 m long 'J' type EN8 grade foundation bolts along with template including the following: (a) MCB SP 6A 230 V,10 kA mounted on 3 mm thick Hylam Sheet -1 No. (b) 4 Way connector bolt along with locking arrangement, weather proof and water proof control space. Note: (c) The Rate quoted deemed to include the cost of 50 mm PVC pipe from cable trench to center of the pole concrete and 'J' type EN8 grade foundation bolts. (d) The rate quoted deemed to include the cost of connecting of incoming and outgoing cable in new octagonal poles through PVC pipe including taking out loop extending up to junction box connecting complete all as specified and directed.

M&L for 3 Core 1.5 Sq mm size multistranded copper conductor PVC unsheathed 650 / 1100 Volt Grade drawn in through steel tubular poles, for interconnection of cable looping box to Street Light Fitting

Material and labour for earthing complete with galvanised steel plate electrodes of size 600x600x6mm thick burried directly in ground with earth pit not less than 2.25 meter deep below normal ground level with top edge of plate not less than 1.5 meter below normal ground level connected to galvanised 32x 6 mm earth lead by means of nuts bolts check nuts GI washers earth wire protected by galvanised iron pipe 40 mm bore (Medium grade) all as directed including concrete pit in PCC (1:3:6) type CI, precast RCC cover slab of size 30x30x10 cm with one handle for lifting made out of 8 mm diameter MS bar,including funnel, wire mesh and 20 mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternate layers necessary earth work in soft/loose soil complete all as shown in electrical plate No 3 of SSR Part I including testing on completion all as specified and directed.

Supply and fix high aluminium alloy LED Aviation light, IP65, 60 watt

Cutting existing CI pipe 150 mm dia for branch connection of 100 mm dia pipe and insertion of tee 150x100x100 mm dia and connecting complete incl cutting extg pipe threading and minserting TEE and Nipple and Union of 100 MM dia incl all required excavation and earth work complete all as specified and directed

Supply and fix foot valves (Brass Insert) of 80 mm dia bore

01 Working + 01 Standby Supply and fixing centrifugal pump, electric driven, supplied and installed complete 10 HP and PCC foundation for pump set complete all as specified and directed.

Supply,install, test and commission, Indoor type, LT panel box ,cubicle type, factory fabricated,CPRI approved ( any company from list of make), panel board made with 2 mm thick CRCA Sheet , weather and vermin proof ,floor mounted , 7 tank process ,powder coated in siemens gray colour inside and outside, 3 phase, 4 wire system copper bus bar mounted on hygroscopic insulator housed in separate bus bar chamber covered with R-Y-B and black PVC heat shrinkable sleeve, with 50mmx50mmx6mm angle iron frame with and including PCC 1:3:6 type C2 foundation and covering front and back opening hinged door along with suitable locking arrengement including necessry bus bar tappings, copper control wiring of required size, connecting cable with necessary cable glands, lugs etc, independent chamber to accomodate the MCCBs MCBs,measuring instruments,Bus bar and cable galley chamber ,proper arrangements for ventilation complete with provn for connecting earthing at both sides of panel board and comprises as following:- (Water Supply PANEL )

INCOMER i) MCCB 4 Pole, 63 A, 415V, 25 KA - 1 No. I/C OUTGOING i) MCB TPN 32 A -02 Nos (W/S PUMP) ii)FASD Starters 10 HP- 02 Nos iii)MCB SPN 16A - 01 Nos. (Pump house Light) BUSBAR 100 Amps copper bus bar with colour coded heat shrinkable sleeve METERING & INDICATION i) Ammeter, Digital type, with suitable CTs – 01 set ii) Voltmeter, Digital type - 01 set iii) R-Y-B phase indicating lamp- 01 Set iv) Multi function meter with suitable CT's -01 No.

Construction of brick masonary valve chamber of size 0.9m x0.9m x 0.9 mtr (internal dimension ) above ground level 30 cm suitable for 100 mm dia sluice valve , 15 cm thick foundation using PCC 1:4:8 type D-2 ( using 40 mm graded stone aggregate ) over 15 cm thick hardcore, 23 cm thick brick wall , bults in cement and sand mortor 1:4 , 15 cm thick internal and external plaster including top of floor in cement and sand mortor 1:3,finished even and smooth , without using extra cement, 10 mm thick mild steel plate cover on 50 mm x 50mmx6 mm MS angle iron frame embeded in PCC 1:2:4 type B-1 ( using 20 mm graded stone aggregate ) coping having rectangular hinged opening of size with locking arrangement & handle made out of 25 cm dia MS round bar , hold fasts etc, applying one coats od red oxide primer and two coats of synthetic enemelled paint to all steel surfaces and earth work in any type of soil including disposal of surplus soil to a distance not exc. 50 mtr complete .

Supply and fixing of auto on-off-system for water supply pumping set of up to 20 HP, GPRS/GSM based centralized controlling & monitoring system for water pumps accordding to level of water tank with electric actuator & butterfly valve cubical panel fabricated with 1.6/2mm thick CRCA/GPSP sheet suitable for 415volt, 50Hz AC complete with controlwiring of starter for pumps with auto- phase- sequence corrector and having provision of auto & manual control over, duly powder coated floor with wall mounted type complete with necessary switchgear/ accessories, micro processor based RF module, transponder/ Repeater, GSM module for SCADA software and tablet/ LCDXispla of water level via liquid pressure Transducer all as specified by manufacturer and directed by Engineer-in-Charge.

S&F for sprinklers of cast brass alloy 20mm dia with wheeled pipe stand complete all as specified and directed.

S&F for GI Union socket of 25mm complete all as specified and directed.

FURNITURE

Manufacture & Supply of Almirah Steel Medium, complete all as specified and shown on drawing No. FD-1032.

Manufacture & Supply of Almirah Steel large half hanging, complete all as specified and shown on drawing No. FD/E6/MAP/18

Manufacture & Supply of Bath stool PVC, complete all as specified and shown on drawing No. FD/E6/MAP/07

Manufacture & Supply of Bed hard with ply top, complete all as specified and shown on drawing No. FD/E6/MAP/08(R)

Manufacture & Supply of Bin soiled multipurpose, complete all as specified and shown on drawing No. FD/E6/MAP/09

Manufacture & Supply of Chair dining (long back), complete all as specified and shown on drawing No. FD/MAP-II/04.

Manufacture & Supply of Chair verandah, complete all as specified and shown on drawing No. FD/MAP-11/06

Manufacture & Supply of Chair writing (MAP), complete all as specified and shown on drawing No. FD/E6/MAP/12.

Manufacture & Supply of Chair computer (MAP), complete all as specified and shown on drawing No. FD/E6/MAP/01.

Manufacture & Supply of Charpoy folding IP with hardtop, complete all as specified and shown on drawing No. FD 388(R).

Manufacture & Supply of Charpoy IP Hard top, complete all as specified and shown on drawing No. FD/E6/MAP-II/01.

Manufacture & Supply of Hat stand with mirror, complete all as specified and shown on drawing No. FD-283.

Manufacture & Supply of Ladder Aluminum, complete all as specified and shown on drawing No. FD-1025.

Manufacture & Supply of Peg Table, complete all as specified and shown on drawing No.FD-384.

Manufacture & Supply of Plate rack, complete all as specified and shown on drawing No. FD-242.

Manufacture & Supply of Receptacle PVC (20 Ltrs MAP), complete all as specified and shown on drawing No. FD/E6/MAP/13.

Manufacture & Supply of Shoe Rack Steel, complete all as specified and shown on drawing No. FD/E6/MAP/02(R).

Manufacture & Supply of Side board, complete all as specified and shown on drawing No. FD-1112.

Manufacture & Supply of Sofa set 5 seater cushioned, complete all as specified and shown on drawing No. FD/MAP-II/02.

Manufacture & Supply of Table dressing ladies with stool, complete all as specified and shown on drawing No. FD/MAP-II/07.

Manufacture & Supply of Table bed side, complete all as specified and shown on drawing No. FD/E6/MAP/15(R).

Manufacture & Supply of Table Table center, complete all as specified and shown on drawing No.FD-274.

Manufacture & Supply of Table dining 6 pers, complete all as specified and shown on drawing No. FD/MAP-II/03.

Manufacture & Supply of Table writing, complete all as specified and shown on drawing No. FD-275.

Manufacture & Supply of Table computer, complete all as specified and shown on drawing No. FD/E6/MAP/03.

Manufacture & Supply of Teapoy, complete all as specified and shown on drawing No. FD-382.

Manufacture & Supply of Teapoy veranda, complete all as specified and shown on drawing No. FD/E6/MAP/17.

Manufacture & Supply of Trolley for TV, complete all as specified and shown on drawing No. FD/MAP/04(R).

MANNING & OPERATION OF LIFTS (REFER ANNEXURE-XII)

Manning & Operation of lifts (Qty-02 Nos) all as provided under subject work by deploying 01 x lift operator in 1st & 2nd shifts (1x2=2) and 01 operator in night shift altogether on all days including Sundays and holidays (1st Shift-0600 hrs to 1400 hrs and 2nd Shift-1400 hrs to 2200 hrs and night shift-2200 hrs to 0600 hrs) including taking care of all lifts from any pilferage or damage etc. Period of manning & operation shall be 60 months from the date of completion of the project. (TOTAL number of lift operators required per day are 03 nos.)

11 months after completion of work

11 months after completion of BoQ Sl. item No. 33.01 here-in-before

11 months after completion of BoQ Sl. item No. 33.02 here-in-before

11 months after completion of BoQ Sl. item No. 33.03 here-in-before

11 months after completion of BoQ Sl. item No. 33.04 here-in-before

05 months after completion of BoQ Sl. item No. 33.05 here-in-before

ANNUAL COMPREHENSIVE MAINTENANCE OF LIFTS (REFER ANNEXURE-XIII)

Annual Comprehensive maintenance of Lifts (Qty-02) all as installed under subject work including repairs / replacement, periodic maintenance all as per OEM manual and repair / replacement of parts of lifts installed in the subject project as per schedules comprising of all devices and accessories throughout for a period of 03 (Three) years including Sundays and holidays after expiry of defects liability period (DLP). Note Contractor shall carryout comprehensive maintenance (routine, daily, weakly. monthly, quarterly, half yearly, yearly) as per attached Performa and maintain all the lifts in serviceable condition 24 hrs x 365 days with out any extra cost. ) Final bill shall be paid after certified completion of work for each WO seperately

One year after expiry of defects liability period

One year after completion of BoQ Sl. item No. 35.01 here-in-before

One year after completion of BoQ Sl. item No. 35.02 here-in-before

SOOD ASSOCIATES PVT LTD (BID ID -3280411)

KESHAVPRIY PROJECTS PRIVATE LIMITED (BID ID -3280985)

M/s. Vasant Constructions (BID ID -3278411)

SHRIPATI INFRASTRUCTURES PVT LTD (BID ID -3280125)

Hem Construction Company (BID ID -3282841)

S.N. Constructions (BID ID -3279600)