PROVN OF COVERED ACCN FOR WASHERMAN SHOP (DHOBI GHAT) DRYING AND IRONING ROOM, DRAINAGE FACILITIES LONG FIRING RANGE AT 154 INF BN (TA) BIHAR, CAMPBELL BAY UNDER GE (I) CAMPBELL BAY

Amount

B/R PORTION Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/ loose soil all as specified and as directed.

Excavating in trenches, n.exc 1.5 m wide and n.exc 1.5 m in depth; for foundation, etc., or for shafts, wells, cess pits, manholes, pier holes, etc., n.exc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in any type of soil all as specified and as directed.

Description all as per item No 2 above but depth exc 1.5 m and n.exc 3 m all as specified and as directed.

M & L for PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete all as specified and as directed.

M & L for use and waste of timber as in formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surfaces of concrete flat all as specified and as directed.

M & L for use and waste of timber as in formwork to sides of pillars, posts, struts, piers, column and stanchions for rough finished surfaces of concrete square, circular, rectangular on plan or polygonal all as specified and as directed.

M & L for use and waste of timber as in formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc,. also splays between floors and beams, etc. for rough finished surfaces of concrete flat all as specified and as directed.

M & L for use and waste of timber as in formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n.exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 5cm but n.exc 10cm wide for rough finished surfaces of concrete all as specified and directed.

M & L for use and waste of timber as in formwork to chajjas, troughs and similar items including edges for rough finished surfaces of concrete flat all as specified and as directed.

M & L for RCC M30 (Design Mix) (using 20 mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete all as specified and as directed.

M & L for RCC M30 (Design Mix) (using 20 mm graded stone aggregate) as in columns, pillars, piers, posts and struts all as specified and as directed.

M & L for RCC M30 (Design Mix) (using 20 mm graded stone aggregate) as in beams, bands, cantilevers, bressummers, lintels over 1.5m span, all as specified and as directed.

M & L for RCC M30 (Design Mix) (using 20 mm graded stone aggregate) as in Chajjas all as specified and as directed.

M & L for mild steel TMT reinforcement bars of 10 mm dia and over, cut to length, bent to shape required including cranking, binding spirally for hooping for columns hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clip all as specified and as directed.

Description all as per Item No 14 above but 5 to 8mm dia complete all as specified and as directed.

M & L for mild steel TMT reinforcement bars of 5 mm dia and over up to 10 mm dia as in stirrups, spacers and binders, cut to length bent to shape required including cranking, binding spirally for hooping for columns hooking ends and binding with and including MS wire annealed not less than 0.9 mm dia or securing with clip all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm all as specified and as directed.

Removing excavated material (soil) to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point all as specified and as directed..

M & L for anti termite treatment, treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and as directed.

M & L for anti termite treatment, treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and as directed.

M & L for anti termite treatment, treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed.

M & L for anti termite treatment, treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall all as specified and as directed.

M & L for precast cement concrete (1:3:6) type C-1 (using 20 mm graded stone aggregate) block masonry with solid blocks, exc 10 cm in width and set in CM (1:6) complete all as specified and directed.

S & F for rolled mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle channel or flat sections) including distance pieces, cleats etc., confirming to Fe 410-W (Gde E-250) quality A complete all as specified and as directed.

S & F for rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters fixed with angle cleats or other connecting plates conforming to Fe 410 -W (Gde E- 250) all as specified and as directed.

S & F of pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick having tensile strength of 550 MPa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S & F of pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 MPa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M & L for hard core of gauge n.exc 63 mm , with broken stone or boulders, deposited, spread and levelled in layers n.exc 15 cm thick, watered and well rammed to a true surface as in plinth protection/ hard standing complete all as specified and as directed.

M & L for providing 75 mm thick PCC (1:4:8) type D-2, (using 40 mm graded stone aggregate) as in sub base complete all as specified and as directed.

M & L for rendering 10 mm thick in cement plaster (1:6) on fair faces of concrete surfaces finished even and smooth without using extra cement all as specified and as directed.

M & L for rendering 15 mm thick in cement plaster (1:4) mixed with WPC as per manufacturer's instruction on fair faces of concrete surfaces, finished fair and even complete all as specified and as directed. Note : WPC shall be measured and paid separately.

Supply only Integral waterproofing compound of approved make all as specified and as directed.

M & L for non-skid coloured ceramic joint free tiles (matt finish) 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including15 mm thick screed bed in CM (1:6) over 25 mm thick PCC screed (1:2:4) type B-0 (using 12.5 mm graded stone aggregate) all as specified and as directed.

Description all as per item No 33 above but on vertical surfaces as in skirtings, laid over and including 10 mm thick rendering/ backing coat in CM (1:4) complete all as specified and as directed.

M & L for 75m mm thick PCC (1:3:6) type C-1, (using 20mm graded stone aggregate) as in plinth protection, pavings, path etc., surface finished even and smooth without using extra cement complete all as specified and as directed.

M & L for forming 12mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ complete all as specified and as directed.

S & F of 4 mm thick non asbestos fibre cement building boards fixed or laid/ inserted to aluminium framework in ceilings including anodised aluminium snap grid frame work of size 605 x 605mm for false ceiling suspended with hangers from roof trusses and fixed to wall by aluminium Tee section not less than size 38mm x 38mm x 1.5mm & L- section size 40mm x 25mm x 2mm section and applying two coats of OBD over approved primer over ceiling boards complete all as specified and as directed.

M & L for preparation of new or previously untreated surfaces of steel and iron surfaces of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome paint complete all as specified and as directed.

M & L for preparation of newly plastered or unplastered surfaces of walls and applying two coat of distemper oil emulsion white tinted over a coat of alkali resistant primer complete all as specified and as directed.

M & L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over new surfaces complete all as specified and as directed.

M & L for anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleats for fixing etc., complete all as specified and as directed.

S & F of anodised aluminium door shutters, aluminium section weighing 0.55 Kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc., complete all as specified and as directed.

S & F of anodised aluminium window and ventilator shutters glazed and gauged, side hung type without sash bars for aluminium sections weighing not less than 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays, hinges, suitable handles etc., complete all as specified and as directed.

S & F of 4 mm thick sheet glass, ordinary quality and glazing with aluminum windows all as specified and as directed.

M & L for 12 mm thick prelaminated particle board, exterior grade, prelaminated both sides with decorative choice laminations fixed to aluminum doors / partitions complete all as specified and as directed.

M & L for chequered cement concrete tiles 20cm x 20cm x 25mm thick, 25mm thick with grey cement and pigment, set, jointed and pointed in neat cement slurry in floors, laid over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed.

S & F rotational moulded polythene water storage tanks of 2000 litres (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as directed.

M & L for PCC (1:3:6) type C-2, (using 40 mm graded stone aggregate) as in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and as directed.

S & F 20mm dia Gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe as fixed complete all as specified and as directed.

S & F 20mm dia brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

S & F rolled mild steel sections as in joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) complete conforming to Fe410 (Gde E-250) quality-A all as specified and as directed.

S & F bib taps, 15 mm dia, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed..

S & F PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and as directed.

Supply and laying of 15 mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on wall/ ceiling or laid in floors incl taking down of existing plumbing lines etc., complete all as specified and as directed.

Supply and laying of 20 mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on wall/ ceiling or laid in floors incl taking down of existing plumbing lines etc., complete all as specified and as directed.

S & F stop valves, 20mm dia chromium plated , cast copper alloy, screwed down, high pressure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and as directed.

S & F stop valves, 15mm dia chromium plated , cast copper alloy, screwed down, high pressure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified

S & F PVC (SWR) multi floor trap of outlet dia 75mm to connecting pipe plain with grating including jointing with solvent cement complete all as specified and as directed.

S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

Material and Labour for concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete type C-2 1:3:6 (40mm graded stone) for 100 mm bore pipes complete all as specified and directed

S & F 110mm bore PVC (SWR) plain bends any radius with access door complete all as specified and as directed.

S & F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed.

M & L for precast reinforcecd cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in landings, cover slab, chajjas etc.; and similar articles with plain faces set in CM (1:4)complete all as specified and as directed. Note:- Reinforcement shal be measured and paid separately under relevant item.

Excavation over areas, n.exc 1.5m in deep and getting out in any type of soil including cutting of roots/ branches below ground level wherever required all as specified and as directed.

Excavation over areas, exc 1.5m and n.exc 3.0m in deep and getting out in any type of soil including cutting of roots/ branches below ground level wherever required all as specified and as directed.

M & L for RCC M30 (Design Mix) (using 20 mm graded stone aggregate) as in slabs supported on walls, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M & L for use and waste of timber as in formwork flat to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; complete all as specified and as directed.

M & L for use and waste of timber as in formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter, for rough finished surfaces of concrete flat all as specified and as directed.

M & L for RCC M30 (Design Mix) (using 20 mm graded stone aggregate) as in walls, retaining walls, basement walls and the like; any thickness, above top of footings; including attached pillasters and buttresses complete all as specified and as directed.

M & L for RCC M30 (Design Mix) (using 20 mm graded stone aggregate) as in fins, fascias, curves, parapets and railings exc 60cm in height, newels, balustrade and the like etc; complete all as specified and as directed.

M & L for providing 100 mm thick PCC (1:4:8) type D-2, (using 40 mm graded stone aggregate) laid in floor sub base cement concrete surface, even and smooth without using extra cement complete all as specified and as directed.

E/M PORTION Supplying, laying or fixing,GI medium grade 20mm outer dia water tubings fittings in trenches including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, etc laid in tenches / floors or fixed to walls / ceiling / roof etc including testing etc complete all as specified and as directed. Note:- Necessary earthwork if any will be paid under relevant items & measured seperately

Description all as per Item No 72 above but 40mm Outer dia complete all as specified and as directed.

S & F 40mm dia Gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe as fixed complete all as specified and as directed.

S & F 20mm dia Gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe as fixed complete all as specified and as directed.

S & F 20mm dia bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and directed.

M & L for point wiring with 1.5 Sq mm single core copper conductor FRLS PVC insulated unsheathed 1100 Volts multistranded drawn through and including rigid FRLS PVC rigid conduit and its accessories of suitable size, heavy grade ISI marked concealed on walls /roof and MS pressed steel terminal boxes of 1.6 mm thick of suitable size duly painted with red oxide metal provision of modular cover plates for mounting the switches / sockets/ regulators etc including running up of 1.5 Sq mm multistranded copper conductor flame retardant PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly for One light/Fan point controlled by one switch all as specified and as directed.

Description all as per Item No 76 above but One socket 5 Amps on independent board complete all as specified and as directed.

Description all as per Item No 76 above but One socket 5 Amps on same board complete all as specified and as directed..

Description all as per item No 76 above but with 4 Sqmm cable for 3 pin 15 Amps socket point controlled by one switch on independent board and 4 Sqmm copper conductor green in colour as earth continuity conductor complete all as specified and as directed.

S & F switch piano, flush type single pole, one way 5 Amps complete all as specified and as directed.

S & F ceiling rose PVC/ polycarbonate insulated body with three terminals complete all as specified and as directed.

S & F energy saving ceiling fan 1200 mm sweep with double ball bearing in opal white color and BEE 5 star rated complete including provision of 3 core copper wire of size 1.5 Sqmm , connected from ceiling rose to fan and marking MES No in black paint complete all as specified and as directed.

S & F stepped type electronic fan regulator flush type complete all as specified and as directed.

S & F switch socket combination 2 in 1, 3 pin, 5 Amp flush type universal type complete all as specified and as directed.

S & F switch socket combination 2 in 1, 3 pin, 15 Amp flush type universal type complete all as specified and as directed.

M & L for submain wiring with single core PVC insulated FRLS multistranded copper conductor cable of size 2 x 6.0 Sqmm drawn into and including rigid non metallic PVC conduit, medium grade not less than 20mm dia ISI marked ivory colour with all conduit fittings and fixing accessories and 6.0 Sqmm FRLS multistranded copper conductor cable as continuous earth wire complete all as specified and as directed. Note : (i) 3 Runs of 6 Sqmm cable shall be measured as one unit length. (ii) The wiring shall be done in proper color coding using red, yellow, blue for phases, black for neutral and green for earth.

S & F surface mounting 20 W LED tube light fitting nominal system lumen output of 2000 lumens and a minimum system efficacy of 100 lm/W, the luminaire shall have a rated system lifetime of 50,000 burning hours at L70 and should have a color temperature of 6500K and CRI>83., pre wired connection up to tube light fitting with connecting up with copper 2 core flexible cord of minimum size 1.0 Sqmm and white in colour.The luminaire shall meet IP20 rating with THD < 10% and PF > 0.95. The total power consumption should not exceed 20W (including driver) including round block complete all as specified and as directed.

S & F sheet metal enclosure for DB’s single pole and neutral, double door 240V, 8 way with 100 Amps rated bus bar all as specified and as directed.

S & F MCB SP 6 to 32 Amps 10 KA, "C" Series complete all as specified and as directed.

S & F MCB SPN 32 Amps 10 KA, "C" Series complete all as specified and as directed.

M & L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized GI wire 4 mm dia (up to 7.5m in length from earth plate) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate No 5 of SSR part 1 including necessary excavation and earth work in any type of soil, PCC (1:3:6) type C-1 chamber with RCC (1:2:4) type B-2 40 mm thick cover with MS bar 8mm dia 150mm c/c reinforcement, watering funnel 15mm dia light grade for protection of earth electrode 20mm dia for watering all as speicified and directed and tested on completion. (i) Earth work & PCC are deemed to be included in the quoted rate. (ii) On testing after completion, if the desired earth resistance is not obtained the earthing will be redone to the entire satisfaction of Engr-in-Charge at no extra cost

RSL Construction

ASHOK BISWAS

USR Transport