8209 SPECIAL REPAIR TO QTR NO 89 09 AND 89 11 AT ZOZILA LINES PROVN OF RETAINING WALL AND HARDSTANDING AT BLDG NO P 55 AT AIPT AND APTC PROVN OF 24 NOS EXHAUST FANS WITH ALUMINIUM VENNTILATOR AT AIPT AND CERTAIN MINOR WORKS AT AFMC UNDER GE CENTRAL

Amount

Demolition of Cement concrete in ground floor or paving n.exc 15 cm thickness (below or above ground level) and removing rubbish off the premises complete all as directed.

Demolitions of stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar complete all as specified and removing rubbish off the premises complete all as directed.

Taking down cement plaster on brick or stone walls or concrete surfaces etc incl racking out joints, hacking for key, scrubbing down with water etc including removing rubbish off the premises complete all as directed.

Dismantling ceiling boards of AC sheets or any description of any thickness including cover fillets etc complete and removing from site of work complete all as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exc. 1.50 Sqm and not. exc. 4Sqm. each and removing from site complete all as directed.

All as per item No 5 here-in-before but n exc 1.5 sqm each

Taking down shutters of any description exc 2 sqm each and rescuring or easing & adjusting after repair in door opening and connected carpentry work complete all as all specified and directed.

Taking down GI tubing & connection 15mm bore laid in floor / trenches or fixed to walls including removing from site complete all as directed.

All as per item No 8 here-in-before but 20mm bore

Demolition and breaking of drain pipes AC/CI/PVC set in cement mortar or adhensive of 75 mm to 110 mm dia and removing from site complete all as directed.

Surface dressing n exc 15 cm deep in hard/dense soil complete all as specified and directed

Surface excavation n exc 30cm deep and averaging 15cm deep and gettting out in soft/ loose soil complete all as specified and directed.

Excavation in trenches not exc 1.5m wide and n.exc 1.5m in depth for foundation , etc and getting out in in soft/loose soil complete all as specified and directed.

Excavating in trenches, exc 1.5m wide and n exc 1.5m in depth; for foundation, etc and getting out in hard/dense soil complete all as specified and directed

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out in soft/ loose soil returning, filling in with ramming earth around, in layers not exceeding 25 cm, and removing surplus soil to a distance not exceeding 50 m complete all as specified & directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and directed.

M & L for Hardcore of broken stone or boulders gauge exc 63mm and nexc 100mm, deposited,spread and levelled in layers n exc 15cm thick, watered and rolled/rammed to a true surface complete all as specified and directed.

M & L for moorum/bajri filling in floors, or pavings laid in layers n exc 15cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L for Plain Cement Concrete 1:5:10 type E2 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete all as specified and directed.

All as per item No 20 here-in-before but PCC (1:4:8) type D2

All as per item No 20 here-in-before but PCC (1:3:6) type C2

M & L for PCC (1:2:4) type BO (using 12.5 mm graded stone aggregate) as in window cill, bed block, kerb, benching coping including weathering slightly rounded and chamferred angle and throating as directed including necessary formwork and finish even and smooth without using extra cement complete all as specified and directed

M & L for PCC 1:2:4 type B1 (using 20 mm graded aggregate) in surface channels and drains complete all as specified and directed.

M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc. complete all as specified and as directed

M&L for 40mm thick damp proof course to horizonal or vertical surface in cement concrete (1:2:4) type B0 with using WPC @ 3% by the weight of cement or as per manufacturer's instruction including formwork complete all as specified and directed. Note: WPC shall be measured and paid separately

M&L for precast cement concrete block masonry exceeding 10cm in width with solid blocks of PCC (1:5:8) gde D-5 and setting in CM 1:6 complete all as specified and directed.

Cutting holes in brick wall, built in CM for inserting hold fast and making good dismantled portion in CM 1:3 exc half brick but n.exc. one brick thick wall complete all as specified and directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades,shelves , lintels, etc.and cutting chases for concealed water tubing and making good, cutting not exc 10 cm girth in brick walls complete all as specified and directed.

S&F plain, framed, panelled shutters of 2nd class hard wood 35mm thick (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers,complete all as specified and directed.

S&F 30mm thick glazed and skeleton shutter open rebated and prepared to receive glass, gauge etc edges of framing plain, chamfered or rounded fitted with cut and mitred stile as per beads for securing glass etc, The size of the rail and site as per IS 1003 (part -I), Kiln seasoned and chemically presure treated as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, in opening as per specification and drawing complete all as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles end plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded seat to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement and fixed in the frame at site as per specification and drawing all as specified in SSR and directed.

S&F mild steel work in small articles such as hold fast etc. all as specified and directed.

S&F mild steel butt hinges, medium weight of100mm size complete all as specified and directed.

S&F mild steel pressed handle, oval type, of 150mm size complete all as specified and directed.

S&Fmild steel barrel tower bolts with bright bolt of 200mm long complete all as specified and directed.

S&F 300mm long mild steel sliding door bolts, plate type, with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc of size of frame 125 x 60 mm complete all as specified and directed.

S & F Steel windows with side hung double shutters including projecting type hinges with steel handle, steel peg stay, complete with glazing bars, dovetailed or welded all as specified and directed.

S & F steel ventilators with top hung shutter including hinges steel peg stay, complete all as specified and directed.

S&F ventiltors/ louvers(any size) with partially guaged shutter using 5 mm thick x 10 cm wide frosted glass strips and following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading etc all as directed. (a) SP 20048 (b) Glazing clips 19352

S&F rolled mild steel in purlins, rails, fastenings and heavy bracket framing including distance pieces, cleats, Wind ties etc conforming to grade Fe-410-W (Gde E-250) quality 'A' complete all as specified and directed

S&F mild steel framed work conforming to Fe 410-W (Gde E-250) quality 'A' as in doors or gates of angle or other section with gnsset plate rails, braces etc complete drilled or welded to expanded metal or other covering, doors etc, to be preparad for hanging or sliding with and including either hooks or hinges or steel hanging door fittings and hanging, fastening and fixing complete all as specified and directed.

S&F framed work such as grills, gratings etc, with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, framed work of watertanks and similar work confirming to Fe 290 Gde -E-165 complete all as specified and directed.

S&F framed work as in gate including pintle hinges, stops, hand made sliding bolt complete all as specified and directed.

S&F Rolled section as in main and cross beam, hip and jack rafters, purlins where connect to common rafters and running rails, fixed with angle cleats or other connecting plates conforming to Fe 410-W (Gde E 250) quality A including necessary welding complete all as specified & directed.

S&F expanded metal n exc 4kg / sq metre, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples including necessary welding complete all as specified and directed.

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including cutting in patch wherever necessary all as specified & directed.

All as per item No 50 here-in-before but plain steel sheet

S&F PVC solid wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing to wall to make PVC frame complete all as specified and directed.

M&L for 10 mm thick gypsum board sheet for ceiling on and including anodised aluminium powder coated snap grid of size 60cm x 60cm with using 36.5 mm x 23.5mm x 1.5mm thick main tee, 23.5 x 23.5mm x 1.28mm cross tee, and 25mm x 25mm x1.5mm angle fixed to wall for false ceiling including necessary nuts for securing frame work to ceiling suspended @ 120cm C/C both ways, size of grid shall be 605mm x 605 mm complete all as specified and directed.

M&L for 9mm thick gypsum board for ceiling, prepainted and perforated finish, of size 60 sqmm x 60 sqmm laid over and including galvanised iron grid of size 600mm x 600mm made out of 0.5mm thick GI tee of size 32x24mm for main, 25x24mm for cross and 20 x 20mm angle fixed on wall, powder coated finish, hung from ceiling by 2mm dia GI suspension wire spaced at 1200mm on main runner incuding making niches for fan/light complete all as specified and directed.

M&L for 75 mm thick PCC 1:4:8 type D2 (using 40 mm graded stone aggregate)as in sub base / paving etc all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C2 (using 40 mm graded aggregate) as in plinth protection / path etc finished even and smooth without using extra cement complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6) type C2 (using 40mm graded aggreagte in sub base/ paring including spike rolling to surface or making impressions of expanded metal, whilst concrete is green complete all as specified and directed.

Roughening surfaces of old concerte floor by picking sweeping clean and washing down with water to remove dust and brushing neat cement slurry with 3.0kg of cement per sqmetre complete all as specified and directed.

M&L for 100mm thick PCC (1:2:4) type B2 using (40 mm graded aggregate) as in hardstanding complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate ) for leveling course to receive the top layer like tiles etc complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floor set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles over and including 15 mm thick cement screed bed in CM 1:6 complete all as specified and directed.

All as per item No 63 here-in-before but area of each tile exc 0.06 sqm but n exc 0.11 sqm.

M&L for coloured glazed Ceramics tiles of size 300 x 450 x7to8mm thick in vertical surfaces such as dado, set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick rendering in cement mortar 1:4 complete all as specified and directed.

All as per item No 64 here-in-before butof size 300 x 200 x 7mm thick.

M & L for machine cut kota stone slab in flooring 20 to 25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete over and including screed bed 15mm thick in CM (1:6) complete all as specified and directed.

M &L Machine cut kota stone slab 20-25 mm thick in riser of steps, skiring , dado and pillar laid over cement screed base 15mm in CM (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M & L granite ( of any type ) work ( table rubbed and polished ) 18 to 20 mm thick in steps, jambs, pillars, window cill , cooking platform and flooring in CM 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite with and including screed bed or bedding layer 15 mm thick, in CM 1:4 on stone masonry surfaces complete all as spedified and directed.

M&L for Machine pressed coloured precast concrete interlocking paver block glossy finish any shape and size confirming to IS 15658 -2006 of 60mm thickness, M-35 Grade over and including 20 mm thick sand cushioning complete all as specified and directed.

M&L for precast coloured, chequered cement concrete tiles, glossy finish of size 305 x 305mm x 25mm thick, conforming to IS-1237 (2006) set jointed and pointed in neat cement slurry in floor laid over and including 20mm thick screed bed in CM (1:6) complete all as specified and directed.

M & L for chamfer, splays or arris in facework to granite exc 15 mm but n exc 50 mm wide complete all as directed.

Rounding to edges of stone slab one side ,such as in steps cooking platform and similar situations complete all as specified and directed.

M&L for rendering 15 mm thick on concrete surfaces in CM 1:6 finished with sponge finish complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 mixed with WPC @ 3% by the weight of cement or as per manufacturer's instruction complete all as specified and directed. Note: WPC shall be measured and paid separately.

M&L for rendering 15mm thick in CM (1:3) on concrete surfaces and finished even and smooth without using extra cement complete all as specified and directed.

Supply only water proofing compound

S&F 3mm thick sheet glass ordinary quality with oil putty in square n.exc 0.50Sqm in each pane complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying two coat of old bound destemper over a coat of primer and 2mm thick wall care putty complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying two coat of cement base paint over a coat of primer complete all as specified and directed.

M&L for preparation of old plastered surface of wall and applying three coats of white washing on wall complete all as specified and directed.

M&L for preparation of old plastered surface and applying two coats of white washing on ceiling complete all as specified and directed.

M&L for preparation of old plastered surface and applying two coats of white washing on complete wall all as specified and directed.

Complete removal of existing treatment and M&L for applying 2mm thick wall care putty and applying two coats of oil bound distemper on walls complete all as spd and directed.

M&L for preparation of new wooden surface exceeding 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for two coats of synthetic enamel paints on steel surface exc 10cm in width or girth over one coat of red oxide primer incl preparation of surfaces complete all as specified and directed.

M&L for two coats of synthetic enamel paint on steel surface n exc 10cm in width or girth over one coat of red oxide primer incl preparation of surfaces complete all as specified and directed.

S & F 15 mm bore GI tubing medium grade with all fittings & fixed complete to walls / ceiling or laid in floors all as specified & as directed.

All as per item No 87 here-in-before but 20 mm bore

Refixing old steel tubing of 15mm bore and connections in new or old position complete all as specified and directed.

S&F for 110 mm bore PVC SWR pipes single socketed in any length with rubber ring joints fixed to wall floor including clamp etc complete as specified and directed.

All as pr item no 81 here-in-before but 75mm bore.

S&F PVC (SWR) junction single T 75 mm dia equal or unequal with oval access door complete all as specified and directed.

S&F PVC (SWR) bend 75 mm dia of any radius complete all as specified and directed.

S&F PVC (SWR) 75 mm dia vent cowl complete all as specified and directed.

Supply and hoisted in position Rotational moulded polyethylene water storage tank double layer 500 litres (cylindrical vertical with closed top) capacity complete including taking down old one all as specified and directed.

Supply and fix in repairs vitreous china squatting pan "Orissa pattern" of size 580x440 mm, white, with 'P' or 'S' trap, front or back inlet and foot rests including PCC bedding complete all as specified and directed.

S & F in repairs vitreous china wash hand basin white flat back of size 550x 400mm excluding taps waste chain and plug and porcelain stopper but incl necessary brackets CP brass wastes coupling complete all as specified and directed.

S&F in repairs PVC flushing cistern low level of 10 ltrs capacity including brackets for flush tank, PVC flush pipe and all necessary fittings etc complete all as specified and dirrected.

S&F in repairs mirror of any size 5.5mm thick mounted on A.C building board 6mm thick including powder coated aluminium frame complete all as specified and directed.

S&F in repairs of 15 mm bore stop valve cast copper alloy chromium plated fancy type with long shank and cup consealed type secrewed both ends for iron pipe or for unions complete all as secified and directed.

S & F in repairs 15 mm bore bib taps,fancy type cast copper alloy chromium plated with crutch or butterfly handle, screwed down and screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs 15mm bore for chromium plated angular stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repairs chromium plated 15mm bore pillar taps , cast copper alloy with crutch or butterfly handle, screwed down, high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and directed.

S&F in repairs 125mm size shower rose of chromium plated of any colour and fixing with 15mm pipe complete all as specified and directed.

S&F in repairs brass chromium plated tubular towel rail 20mm dia 'D' type 600mm long with brackets complete all as specified and directed.

S&F in repairs Brass chromium plated soapdish any type fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F grating dooms 100 mm dia of PTMT (minimum weight 25 gms) all as specified and directed.

S&F curtain rod 20 mm dia decorative type powder coated aluminium section complete all as specified and directed.

S& F decarative type funnel/bracket to suit the curtain rod complete all as specified and directed.

S&F stainless steel plate rack made of 1.00 mm thick sheet grade SS- 304 of standard size 36"x36"x8" and of approved quality of finish including taking down old one complete all as spd and directed.

S & F stainless steel sink with drainage board made of stainless steel 1 mm thick with plugs washers and waste including bedding in cement mortor or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm X 330mm X 160 mm including taking down old one complete all as specified and directed.

S & F laboratory sink tap of brass chromium plated complete all as per product code no FLR-CHR 5179B of make jaquar or equivalent model from the specified make given in PS.

S & F stainless steel kitchen sink without drainage board of 1 mm thick with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm including taking old one complete all as specified & as directed.

S&F 32mm dia PVC Flush pipe of polyethylene of low or high density suitable for WHB complete all as specified and directed.

S&F 32mm dia high density polyethylene pipe (HDPE) laid in trenches or floor including necessary bends/ tees etc complete all as specified and directed.

S&F PVC Connection pipe 15 mm dia with PTMT nuts of length 450 mm complete all as specified and directed.

Taking down existing unserviceable point wiring of any description/type/ size of light/fan/tube/power/two way/bell etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes all as specified.

Taking down the existing unserviceable main switch / DBs of any type / capacity / description as existing at site including MCBs any type and capacity making good the disturbed surfaces to match with the existing finishes all as specified.

Taking down the existing unserviceable sub main wiring of any type / description as existing at site including making good the disturbed surfaces to match with the existing finishes all as specified.

Taking down ceiling fan of any sweep and Energy meter, keeping with safe custody and refixing the same with replacement of unsv 3 core PVC insulated PVC sheathed 3 core multistranded copper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal over hauling the fan complete including spray, painting with one coating of synthetic enamelled paint including filling cavities with filler, one coat after cleaning all dust etc all as specified and as directed.

M & L for Point wiring using colour coding as per IS with 1.5 Sq mm multistranded copper conductor single core FRLS PVC insulated unsheathed 1100 Volts, ISI-694 marked drawn through duly Casing & Capping in wall /roof/ floor along with suitable fittings, with MS sunken boxes of 1.6 mm thick, of suitable size including good to match with existing finishes including 3mm thick laminated backelite sheet ISI marked for having switches sockets etc along with1.5 Sq mm copper conductor FRLS, PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly all as specified for the following :

(a) One light point controlled by one, one way switch

(b) One ceiling fan point controlled by one, one way switch and regulator.

(c) One three pin 5 Amps socket outlet point controlled by one No one way switch on same board

(d) One three pin 5 Amps socket outlet point controlled by one No one way switch on independent board

(e) One bell point controlled by one switch

All as per Item No. 110 above but with stranded copper conductor 2.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed multistranded FRLS cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet, independent, including PVC insulated multistranded FRLS copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly.

M & L for Point wiring using colour coding as per IS with 1.5 Sq mm multistranded copper conductor single core FRLS PVC insulated sheathed 1100 Volts, ISI-694 marked drawn through Casing & Capping on wall /roof/ floor along with suitable fittings, with modular PVC boxes of suitable size including making good disturbed surfaces to match with existing finishes including Modular plate and its cover for mounting Modualr switches along with1.5 Sq mm copper conductor FRLS, PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly all as specified for one light/ fan point controlled by one, one way switch

S & F for Switch piano, flush type single pole, one way 5 Amp all as specified and directed.

S & F for Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal complete all as specified and directed.

S & F for Socket outlet 2 in 1, 3 pin, 5A complete all as specified.

S&F ceiling rose surface type three terminals complete all as specified and directed.

S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd complete all as specified and directed.

S & F for Bell AC, 230 volts, single pole complete all as specified and directed.

S & F for Bell push, flush type, 5 amp complete all as specified and directed.

S & F modular switch 6A SP one - way 230V white/ ivory finish complete all as specified and directed.

Supply and Fix exhaust fan of sweep 300 mm PVC body single phase suitable for 230 volts 50 HZ 1000 rpm and connecting up complete including provision of 3 core fiexible cord from ceiling rose to connector of fan complete all as specified and directed. Make: Bajaj cat part No Maxima or equivalent model from the specified make given in PS.

S & F MCB DB, SPN, sheet metal enclosure, 8 way with 200 amps rated bus bar double door, fixed on wall including making good to disturbed surfaces complete all as specified and directed.

All as per item No 133 here-in-before but 4 way double door with 200 amp rated busbar.

S & F MCB double pole of rated capacity 32 amps, 240 volts breaking capacity 10 KA, C-curve complete all as specified and as directed.

S & F MCB Single pole rated capacity 6 to 32 amps, 240 V breaking capacity 10 KA ,C- curve complete all as specified and as directed

S & F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one 20 amp single pole MCB 240 volt complete all as specified and directed.

S & F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fitting including 12 W LED bulb complete all as specified and directed.

S & F bulkhead luminaries including LED bulb of capacity 10W Make : Bajaj Cat Part No. 112334 BIBWP 10 W LED or equivalent model from the specified make given in PS.

S & F LED light fitting 2'x2' of capacity 28 watts, environmental friendly, new generation, aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source 230 volts with all accessories internally prewired and necessary mounting arrangements complete all as per cat no PLUTONE02X 2PLR 28W LED 840S of make Havell's or equivalent model from the specified make given in PS.

Supply and fix LED Tube light fittings wall mounted, 18 W LED 6500K with Opal white Poly Carbonate diffuser provided with high efficient integral constant current LED Driver 230 V etc. complete with mounting batten including all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size from ceiling rose to connector Conforming to Cat Part No. BLRB DB 118 & BLRB18 W CW LED Make :- Bajaj or Equivalant model from the specified make given in PS

Supply and fix Inverter split AC BEE 5 Star rated of 2.0 TR capacity electric driven single phase with Auto Power Factor Correction (APFC Technology) for stabiliser free operation between 160 V to 270 V without the help of any external Voltage stabiliser with suitable refrigerant pipes, cables in between indoor and outdoor unit upto a distance upto 5 mtr duly insulated with suitable material run through suitable flexible/rigid pipe of matching colour fixed with the wall including supply and fix 25 mm dia PVC drain pipe drawn through wall/roof and dropping to suitable location upto 5 mtr away. Make : Blue Star/Voltas/Carrier Note : (a) Cost of necessary opening on brick/ stone masonary wall and finishing duly matching with the surroundings is deemed to be included in the quoted rate. (b) The outdoor unit shall be fixed on wall with suitable brackets and the rate of the same is deemed to be included in the quotated rate.

M & L for Submain wiring with 2 runs of single core 4 sqmm PVC insulated unsheated multistranded 1100 volts grade with copper conductor drawn through Casing & Caping , ISI marked and its accessories including one run of single core 4 sqmm PVC insulated unsheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/ main board complete all as specified and as directed. Note : 3 run of 4 sqmm cable and 1 run of PVC casing caping shall be measured as one unit lenght.

M & L for Sub main wiring with 2 runs of single core 4 sqmm PVC insulated unsheathed multistranded 1100 volts grade copper conductor drawn through and including non-metallic rigid 20 mm PVC rigid , ISI marked and its accessories in duly PVC conduit on wall/ roof / floor including one run of single core 4 sqmm PVC insulated unsheathed multistranded 1100 volts grade copper conductor cable as earth continuity conductor along with the wiring and connected from DB/Panel to DB/ main board complete all as specified and as directed. Note : 3 run of 4 sqmm cable and 1 run of PVC conduit shall be measured as one unit length.

M & L for earthing with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm buried directly in ground earth pit not less than 2.25 m deep below normal ground level, with top edge of the plate vertically to depth of not less than 1.5 m below ground level connected to and incl GI wire 4 mm dia and GI pipe 15 mm dia light grade for protection to the extent of 7.5 m as earthing lead by means of GI bolts and nuts etc connecting to equipment with provn of charcoal and salt etc all as per electrical plate No 3 of SSR Pt-I incl RCC cover and MS angle iron frame, watering arrangement with GI pipe 20 mm dia and MS funnel, concrete pit incl excavation and earth work in any type of soil and testing on completion complete all as specified and directed.

L.T Associate

PRASHANT CONSTRUCTION

M/S NAVNEET S MORDE