PROVISION OF SHED TILE PLINTH FALSE CEILING AT 26 ED SPECIAL REPAIRS/REPLACEMENT OF CHLORONOME PLANT AT MP CAMP AND 26 ED AND CERTAIN MINOR REVENUE EM WORKS AT 26 ED IAM GAGAN VIHAR OF GE AF MARATHAHALLI

Amount

M & L Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus hard/dense soil to a distance n exc 50 m and making good surface complete all as specified and as directed.

M & L Providing cement concrete type B-1, 1:2:4 (40 mm graded aggregate) in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and as directed.

S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and as directed .

S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed .

M & L for two coats of synthetic enamel paint for over a coat of primer incl preparation of new steel surfaces not otherwise described, over 10cm width or girth complete all as specified and as direced.

M L for Removing excavation material exc 1.50km but not exc. 5km and depositing complete all as specified and as direced.

Surface excavation n.exc (not exceeding) 30cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and as direced.

M & L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, broken stone or boulders watered and rammed to a true surface complete all as specified and as direced.

M & L for 100 mm thick cement concrete type D-2, 1:4:8 (using 40 mm graded stone aggregate) as in sub base complete all as specified and as direced.

M & L for 50 mm thick cement concrete type B1, 1:2:4 (using 40 mm graded stone aggregate) as in sub base complete all as specified and as direced.

M & L for pre cast cement concrete block masonry with solid block exc 10 cm thk in width (with plain or interlocking joints as directed) complete, in walls and set in cement mortar 1:6 of PCC 1:3:6 (Type C1) complete all as specified and as direced.

M & L for rendering in CM 1:3 10mm thick on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as direced.

M& L for Providing, cement concrete type B0 1:2:4 (12.5mm aggregate) in copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as direced.

M & L for Reinforced cement concrete (nominal mix)Type B1 1:2:4 (20 mm graded aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and as direced.

M & L for Formwork to soffits of suspended slabs fair finished flat such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick complete all as specified and as direced.

M & L for Formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide including fair finished complete all as specified and as direced.

M & L for Mild steel TMT bars 5mm dia and over upto and including 10mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as direced.

S & F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290, Gde-E-165 fixed to stone masonry complete all as specified and as direced.

S & F Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as complete all as specified and as directed.

M&L for two coats of synthetic enamel paint for over a coat of primer including preparation of new surfaces not otherwise described over 10 cm width or girth complete all as specified and as directed.

M&L for two coats of synthetic enamel paint for over a coat of primer in tricolour AF roundels including preparation of new surfaces not otherwise described over 10 cm width or girth on metal plate complete all as specified and as directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing) removing servicable tiles to store and rubbish off the premises complete all as specified and as direced.

Removing demolished material/ debris exc. 1.5km n exc. 5km and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.

Dismantling existing Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.

Disconnecting of existing tubelight with rod, ceiling fans and removal and deposited to the MES store complete all as specified and as directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and as direced.

M & L vetrified ceramic tiles Dark Shade/Double charged/ Ultra charged 10mm thick (square/rectangle) polished area of each tile exc 0.36Sqm but n.exc 0.42 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or cloured cement to match including screedbed 20mm thick CM 1:6 complete all as specified and as direced.

M & L vetrified ceramic tiles 10mm thick (square/rectangle) Dark Shade/Double charged/ Ultra charged polished area of each tile exc 0.36Sqm but n.exc 0.42 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or cloured cement to match including screedbed 10mm thick CM 1:4 on vertical surfaces such as dados skirtings, risers etc all as specified and as directed complete all as specified and as directed.

M & L joint free coloured non skid ceramic tiles 7 to 8mm thick area of each tile exc 0.18 sqm but n.exc 0.38 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 1:4 15mm thick complete all as specified and as direced.

M & L joint free coloured non skid ceramic tiles 7 to 8mm thick area of each tile exc 0.18 sqm but n.exc 0.38 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including backing coat 10mm thick 1:3 on vertical surface such as skirtings, dados risers to steps etc complete all as specified and as direced.

M & L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid , set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed using CM1:3 , 20mm thick including rubbing and polishing of stone slab complete all as specified and as directed.

S&F for Powder coated Anodised (15 micron) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc extruded sections including provision of glazing clips, hinges, handles, etc complete all as specified and as directed. Note : All the aluminium sections provided under this item shall be measured and converted into weight for payment with the designated unit weight mentioned in the manufactures catalouge for the corresponding aluminum sections/fittings.

S & F for figured glass 4 mm thick tinted fixed in aluminum frame with aluminum bedding over rubber bedding complete all as specified and as directed.

S & F for 9 mm thick veneered decorative plywood, grade 1 with decorative face veneers on both sides fixed with aluminium frame complete all as specified and as directed.

S&F for Extruded Aluminium alloy handles, fabricated type, anodised of size 150mm complete all as specified and as directed.

S&F for Extruded Aluminium alloy butt hinges, fabricated type, anodised of size 100mm complete all as specified and as directed.

S&F for Extruded Aluminium alloy tower bolt, fabricated type, anodised of size 100mm complete all as specified and as directed.

S&F for 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and as directed.

S & F Aluminium (Die cast body) door closer hydraulically regulated designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and as directed.

S&F 100mm size Aluminium mortice lock, vertical type, 4 levers, incl plates and two keys complete all as specified and as directed.

M & L for Aluminium anodised snap grid false ceiling using 15 micron anodised standard aluminium sections of size 25mm x 25mm x 1.4mm as in wall angle, 25mm x 25mm x 1.4mm as in Main/ Cross Tees and grid of size 610 x 610mm suspended with 4mm dia. GI wire at intervals n.exc. 600mm centre to centre and fixed to roof slab/ truss with suitable size MS hooks and fastening bolts etc. including 4mm thick 'E' board sheet ceiling boards of size 600mm x 600mm fixed with clips to aluminium snap grid complete all as specified and as directed. Make : Armstrong or equivelant confirming to IS

S & F for Fe-410 W (Gde(E-250 B) framed brackets of angles or tees with web angles cut to shape, drilled and counter sunk for screw, including bending and welding angles as necessary gusset plates, riveting etc n.exc 10Kg and scaffolding upto 6 feet height for welding complete all as specified and directed.

M & L for two coats of synthetic enamel paint for over a coat of primer incl preparation of new steel surfaces not otherwise described, over 10cm width or girth complete all as specified and as directed.

S & F LED recessed/surface 2' x 2' tile 36 watts indoor type fitting with polaris III adrop down acrylic diffuser to give more lumenaire uniformity and up lighting for a white balance effect etc complete all as specified and as directed. Cat No. LCTLRN-36 FO-CDL of crompton or equivalent.

S&F Point wiring complete with 2.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through and including non metallic rigid medium grade PVC conduit with all accessories alongwith fixing arrangements in walls , roofs , floors etc., or fixed in walls and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuity conductor connected to common earth dolly including providing suitable size mild steel terminal boxes concealed in walls with new 3 mm thick hylum sheet top cover fixing on wall surface to accommodate switches, fan regulators, sockets, socket outlets, etc, all as specified and as directed for one 15 amps socket point on independent board complete all as specified and as directed.

S&F Point wiring complete with 1.5 sqmm single core PVC insulated unsheathed FRLS cable 1100 volts grade with multi stranded copper conductor drawn through and including non metallic rigid PVC conduit of 20mm dia and all conduit accessories(surfaced/ concealed in walls/ceilings/floors/roof) and including provisiion of 1.5 sqmm PVC insulated copper cable FRLS as earth continuity conductor connected to common earth dolly in the existing mild steel terminal boxes with new 3 mm thick hylum sheet top cover for housing switches,socket outlets,fan regulators,with frame concealed in walls top cover fixed with brass screws and cup washers etc. all as specified and directed for i) One 5 amps socket point controlled by Independent switch board complete all as specified and as directed.

S&F Wiring complete with 1.5 Sqmm single core FRLS PVC insulated unsheathed cable 1100 volts grade multi stranded with copper conductor conforming to IS 694 drawn through in stove enamelled steel conduit incl accessories run surface on walls/ ceiling incl provision of 1.5 Sqmm FRLS PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as apecidied and as directed.

Supply and fixing Switch socket combination 5 pin, 15 Amps, flush type universal complete all as specified and as directed.

Supply and fixing Switch socket combination 5 pin, 5 Amps, flush type, multipurpose, universal complete all as specified and as directed.

Supply and laying 35 sqmm, 3.5 core LT UG cable XLPE insulated screened PVC bedded, galvanised steel strip wounded ,electric power cable 1100volts with stranded aluminium conductor and making connection with suitable lugs complete all as specified and as directed.

Supply and fixing MCB DB SPN sheet metal enclosure with distribution board MCB SPN 8 way, double door, 240 V, with 200 amps rated bus bar fixed to surface / concealed on walls including making good disturbed surfaces complete all as specified and directed.

Supply and fixing MCB SP 6 - 32 Amps rating, 'B' series , 10 KA breaking capacity, 240 V, 50 Hz AC supply including making all connections complete all as specified and as directed.

Supply and fixing MCB SPN 6 - 32 Amps rating, 'C' series , 10 KA breaking capacity, 240 V, 50 Hz AC supply including making all connections complete all as specified and as directed.

Supply and fixing MCB TPN 63 Amps rating, 'C' series , 10 KA breaking capacity, 415 V, 50 Hz AC supply including making all connections complete all as specified and as directed.

S&F Sub main wiring complete with two runs of 4 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable with one run of 4 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including PVC rigid conuit of 20 mm dia alongwith accessories on surface of wall , roofs etc., all as specified and as directed. NOTE : 2 runs of PVC FRLS cable, one run of earth continuity conductor cable and one run of PVC conduit shall be measured as one length/running metre.

S&F Sub main wiring complete with two runs of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable with one run of 6 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including suitable size PVC rigid conduit alongwith accessories on surface of wall , roofs etc., all as specified and as directed. NOTE : 2 runs of PVC FRLS cable, one run of earth continuity conductor cable and one run of PVC conduit shall be measured as one length/running metre.

S&F for Sub main wiring complete with four runs of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable with two runs of 6 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including suitable size PVC rigid conduit alongwith accessories on surface of wall , roofs etc., all as specified and as directed. NOTE : 4 runs of PVC FRLS cable, two runs of earth continuity conductor cable and one run of PVC conduit shall be measured as one length/running metre.

S&F for sub main wiring 1100 volts grade PVC insulated FRLS multistranded copper conductors, two runs of single core 1.5 Sqmm along with one run 1.5 Sqmm PVC insulated single core FRLS multistranded copper conductor cable as earth continuity conductor along with one run of PVC medium grade conduit all as specified and as directed

S&F sub main wiring 1100 volts grade PVC insulated FRLS multistranded copper conductors, two runs of single core 2.5 Sqmm along with one run 2.5 Sqmm PVC insulated single core FRLS multistranded copper conductor cable as earth continuity conductor along with one run of PVC medium grade conduit all as specified and as directed

S&F Sub main wiring complete with four runs of 2.5 sqmm single core FRLS grade PVC insulated unsheathed cable 1100 volts grade multistranded copper conductor drawn through PVC conduit and accessories laid in floor /on walls etc with one run of PVC insulated copper conductor 2.5 sqmm single core as earth continuity conductor connected with earth dolly and main all as specified. complete all as specified and directed.

Supply and fixing MCCB , 4 pole 12- 63 Amps rating , fixed thermal and magnetic setting , 25 KA breaking capacity, 415 V, 50 Hz AC supply including making all connections complete all as specified and as directed.

Supply and fixing MCCB , 4 pole 63 -100 Amps rating , fixed thermal and magnetic setting 25 KA breaking capacity, 415 V, 50 Hz AC supply including making all connections complete all as specified and as directed.

M&L for earthing complete with galvanized steel earth plate electrode 600X600X6.3mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5M below normal ground level connected to GI earth lead wire 4.0mmdia by means of nuts, bolts, check nuts and washer of GI steel and connecting to testing point including provision of test point and all as shown in electrical plate No. 3 of SSR Pt I. The work is inclusive of necessary earth work and PCC chamber in type CI (1:2:4) with 8 CTD bar reinforcement both ways at 140 mm bents to centre including testing complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 m depth and not exceeding 1.5m width and getting out in hard/dense soil for laying of cable complete all as specified and as directed.

Returning, refilling incl spreading, levelling watering and well ramming in layers not exceeding 25 cm thick with any type of soil all as directed complete all as specified and as directed.

Removing excavated meterial to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and as directed.

Supply , laying and testing cable XLPE insulated screened PVC sheathed armoured heavy duty electric cable with alluminium conductor 1100 V grade of size 10 sqmm 2 core complete laid in trenches/fixed wall etc complete all as specified and as directed.

S & F sub class "B" burnt bricks for cable protection complete all as specified and as directed.

M&L for river sand cushioning to UG cable on layer of 8 cm thick before laying the cable and second layer of 15 cm thick after laying the cable complete all as specified and as directed.

Supply and fix Flame proof weather proof LED fitting 1x20 W IP- 65 protection complete all as specified and as directed. Make -Crompton greeves cat part No- EXTN2LT8-16/20 or equivelant .

Supply and fix switch flame proof rotary type with termination box in LM6 16 A single pole 250 V complete all as specified and as directed.

Supply and fix switch flame proof rotary type with termination box in LM6 16 A double pole pole 250 V complete all as specified and as directed.

Supply and fix Flame proof exhaust fan 300 sweep single phase 230 V with louver shutter complete all as specified and as directed.

Making suitable size core cutting on stone/Bricks wall for fixing of exhaust fan 300mm sweep and making good to the distrubed surface complete all as specified and as directed.

M&L Earthing complete with galvanized iron or steel plate electrode 600 mm x 600 mm x 6.0 mm buried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to GI earth earth wire 4mm by means of GI bolts, nuts, check nuts and washers, earth wire protected by galvanized steel pipe 15 mm bore (light grade) connected to machinery/ equipment all as shown in Electrical plate No. 3 of SSR-2009 Part I and including necessary excavation and earth work in any type of soil, 20 mm bore light grade GI pipe for watering funnel wire mesh, PCC (1:3:6), type C-1 chamber, RCC (1:2:4), type B-1, reinforced with 6 mm dia MS round bars @ 15 cm c/c both way for cover and MS frame etc complete all as specified and as directed.

S&F Fire alaram control panel conventional built in battery 2 zone complete all as specified and directed.

Supply and fix Manual call point complete all as specified and directed.

Supply and fix Hooter wall mounted

Supply and fix Smoke detector

Supply and Fixing MCB DB SPN 4 way, Double door, 240 V, AC, 50 Hz, with 200Amp rated bus bar IP-43 protection conforming to IS-13032 complete all as specified and as direced.

Supply and Fixing in repairs MCB SP 10 Amps rating, 'C' series, 10 KA breaking capacity, 240V, 50 Hz AC Complete all as specified and as directed.

Supply and Fixing in repairs MCB SPN 10 Amps rating, 'C' series, 10 KA breaking capacity, 240V, 50 Hz AC Complete all as specified and as directed.

Cutting the existing road surface in soft/disintegrated rock n.exe1.5m wide and n.exe 1.5m in depth for the purpose of laying pipe complete all as specified and as direced

M&L for valve chamber of internal dimension 450 x 450 x 450 mm in built CM 1:6 with MS cover 3 mm thick and locking arrangement incl excavation and earth work PCC 1:4:8 type D-2 for Idn, PCC beds/copying in cement concrete 1:2:4 type B-1, plastering 15mm thick in Cm 1:4, painting two coats of black bituminiours black paints over a coat of red oxide primer to all complete all as specified and as direced.

Material and labour for construction new valve chamber by bricks 230 mm thick,inside and out side wall rendering with cement mortor 1;4 of10mm thick, ,Pcc 40mm grade aggregate 1;4;8 type D2 below the pipe line 10 cm thick and top of valve chamber Pcc 1;2;4 type B1 20 mm stone aggrgate of 100 mm thick with good finsihing incl white wash inside chamber of size 600x600x900mm the fabrication of frame with MS angle 40x40x5mm thick and MS plate 3mm inclding welding hinges,with single door with handle for opening and locking arrangement including one coat of red oxide and two coat of enamel paint on it complete with good finshing complete all as specified and directed.

S&F Gun metal Gate valve with iron wheel head screwed both ends of size 40mm dia complete all as specified and as direced.

S&F Gun metal Gate valve with iron wheel head screwed both ends of size 50mm dia complete all as specified and as direced.

S&F Gun metal Gate valve with iron wheel head screwed both ends of size 25 mm dia complete all as specified and directed.

S&F GI pipe medium grade 40mm dia with all fittings laid in trenches/ walls complete all as specified and directed.

S&F GI pipe medium grade 50mm dia with all fittings laid in trenches/ walls complete all as specified and directed.

S&F GI pipe medium grade 25mm dia with all fittings laid in trenches/ walls complete all as specified and directed.

Supply and laying GI tube light grade 25 mmdia with clamps and all other fittings including nuts and bolts in order to fix on wall /floor complete all as specified and as directed.

M & L for connecting straight plain brass ferrules screwed both end of size 32mm dia complete all as specified and directed.

M & L for PCC 1:3:6 type C2 with 40mm graded stone aggregate in pillar and post for supporting GI pipe complete all as specified and as directed.

M & L for PCC 1:3:6 type C1 with 20mm graded stone aggregate in coping and filling of road /plinth protection incl necessary form work complete all as specified and as directed.

Supply and fixing reinforced flexible pipe of size 50mm dia complete all as specified and as directed.

M & L for precast cement concrete 1:2:4 type B2 using 40 mm graded stone aggregates as in mass concrete/foundation/for supporting (encasing) of DI pipes of any size and in any position including plastering of surfaces complete all as specified and directed

Material and labour for precast cement concrete 1:3:6 type B1 using 20 mm graded stone aggregates as in mass concrete/foundation/for supporting (encasing) of DI pipes of any size and in any position including plastering of surfaces complete all as specified and directed

S&F Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed of size 25mm dia complete all as specified and directed.

S&F Nipple suitable for HDPE water tank of size 25mm dia complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks(cylindrical vertical with closed top) hoisted and fixed in position of capacity 1000 Ltr complete all as specified and directed. Make : SINTEX / KAVERY / POLYCON

Supply and fixing Chemical dozing system suitable to inject solution up to 25 LPH comprising dozing pump coupled with three phase electric motor of capacity 0.5 HP ,1440 RPM assembly with agitator in one motor agitator with SS sweep blade duly FRP coated FRP tank 150 Ltrs capacity complete unit including DOL starter mounted on heavy duty MS fabricated frame duly anticorrosive paint complete with chemical grade pvc NRV all as specified and directed by Engr- in- Charge.ModelNo SSAPS/CDPT/25 complete all as specified and directed. ( Make : Pristine water / Satya Sai Aqua Pure Services / Sombansi Envigo Engg Pvt Ltd)

Material and Labour for 3 layer PPR (polypropylene random compolymer) pipes of size 20mm dia SDR 7.4 &SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PPR plain & brass threaded polypropylene random fittings fixed complete to walls, ceiling or in floors etc complete all as specified and directed.

Material and Labour for 20mm PPR gate valves (brass insert ) all as specified and directed by Engineer -in- charge complete all as specified and directed.

Cutting existing steel tubing /PVC pipe for alterations or additions for 25/50/80 mm all as specified complete all as specified and directed.

Supply and fix MCB DB SP 4 way single door 200 amps busbar including marking all connections complete all as specified complete all as specified and directed.

Supply anf fix MCB TP 10 Amp rating 'C' series 10 Ka breaking capacity 415 Voltss 50 Hz AC supply including marking all connections complete all as specified complete all as specified and directed.

Supply and laying 16 sqmm, 4 core LT UG cable XLPE insulated screened PVC bedded, galvanised steel strip wounded ,electric power cable 1100volts with stranded aluminium conductor and making connection with suitable lugs complete all as specified and directed complete all as specified and directed.

Supply and laying 25 sqmm, 4 core LT UG cable XLPE insulated screened PVC bedded, galvanised steel strip wounded ,electric power cable 1100volts with stranded aluminium conductor and making connection with suitable lugs complete all as specified and directed.

Supply and fixing MCB DB SPN sheet metal enclosure with distribution board MCB SPN 8 way, double door, 240 V, with 200 amps rated bus bar fixed to surface / concealed on walls including making good disturbed surfaces complete all as specified and directed.

Supply and fixing MCB SP 6 - 32 Amps rating, 'B' series , 10 KA breaking capacity, 240 V, 50 Hz AC supply including making all connections complete all as specified and directed.

Supply and fixing MCB SPN 6 - 32 Amps rating, 'C' series , 10 KA breaking capacity, 240 V, 50 Hz AC supply including making all connections complete all as specified and directed.

Supply and fixing MCB TPN 63 Amps rating, 'C' series , 10 KA breaking capacity, 415 V, 50 Hz AC supply including making all connections complete all as specified and directed.

Supply and fixing moulded PVC / SMC Junction boxes out door type, weather proof, of size 240 x 130 x 95 mm to be fixed at the bottom of street light pole complete with suitable clamp , nut, bolt, washers and suitable glands ,to accommodate 01 No MCB SP 5 Amps 10 KA, with suitable connectors for incoming and outgoing connections complete all as specified and directed.

Cutting GI pipes and reducing to required length by insersion of Tee / valves before laying pipes in trench / open on wall / floors etc of any size pipe threading and fixing with out any leakage in joints/collers/union/valves and testing complete all as specified and directed. (a) 80mm dia

All as per item no 115 above, but 100mm dia.

Supply and lay pipe galvanized, “Medium class”, including fittings as follows;- (a) 80 mm dia

All as per item no 117 above, but 100mm dia

Supply and fix Valves, Sluice, flanged of class 1.6PN CI body as follows:- (a ) 80 mm dia

All as per item no 119 above, but 100 mm dia

Supply and fixing 10 HP Submerssible pump electric driven 415 volts Horizantal type suction and dilvery 80x65 complete Crompton greaves complete all as specified and directed.

Supply and fixing GI Tubing 80 mm dia meadium grade complete all as specified and directed.

Supply and fix flanged Non return valve 80 mm flap type, cast iron body, PN1.0,confirming with IS provision of 3mm thick rubber gasket on both sides of the flanges, bolts and nuts complete all as specified and directed.

S & F of sluice valve 80mm dia with stainless steel spindle and iron wheel head long body class PN 1.6complete with rubber gaskets nut bolts of suitable size, ISI marked complete all as specified and directed.

Supply and fixing Automatic fully star delta starter in sheet metal enclosure suitablefor AC 3phase 415 volts complete all as specified and directed. Make:- L&T MKI SASD 12.5/9.3 KW 9-14 amps or any equivalent.

Supply and fixing 3 core cable 6 sqmm copper flat cable for submersible pumps complete all as specified and directed. Make:- Havells / Finolex / Polycab.

Supply and install 2 Ton 5 star split inverter AC indoor/out door unit complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality including Writing of MES No with Unit Name on equipement using of painter or stencil with paint complete all as specified and directed. Make : BLUE STAR / VOLTAS / CARRIER

S&F Sub main wiring with two runs of single core PVC insulated FRLS with copper conductor multistranded 1100 volts grade 4 sqmm through and including with suitable size of PVC conduit and its accessories,surface/ceiling along with fixing arrangement etc including one run of 4 sqmm PVC insulated multistranded copper earth continuity conductor and connected to common earth dolly complete all as specified and directed copper conductor cable as earth continuity conductor run along with PVC conduit all as specified and as directed. Note;- 3 run of 4 Sqmm, 1 run of PVC conduit shall be measured as one unit,

S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 32 A complete all as specified and directed.

S & F voltage stabilizer with automiatic operation, single phase naturally air cooled indoor type & desigined for input variation between 170 V to 250 V with output voltage stabilizer at 230 V with accuracy of +/- 2.5% and of capacity 5 KVA all as specified and as directed complete all as specified and directed.

Material and labour for mounting suitable stand on wall /sun shade of out door unit of air conditioner including civil work complete all as directed at site complete all as specified and directed.

Material and labour for fixing copper pipe suitable for 2 Ton Split AC including necessary insulation all as specified and directed

Supply and fixing PVC conduit of dia 25mm for drain out the water from indoor AC complete all as specified and directed.

M/S Suresh Raju

M/S J S PRAKASAM