Construction of Yoga Mediation and Panchkarma Balance work of Integrated Block Balance work of Integrated Ayush Block Phase Ist in Ayurvedic Hospital Jammu

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) over areas (Exceeding 30 cm in depth, 1.5 mtr in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.50m, disposed earth to be levelled and neatly dressed. All kind of soil.

Providing and laying in position cement concrete in retaining wall of specifed grade excluding, the cost of centring and shuttering all works upto floor V level. 1:3:6 (1 cement :3coarse sand : 6 graded stone aggregate 20 mm Nominal size) crushed including all carriage complete

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering grade in 1:5:10 (1 cement : 5 coarse sand : 10 graded crushed stone agg. 40mm nominal size) crushed including all carriage complete

Providing and laying cement concrete1:5:10 (1 cement :5 coarse sand : 10 graded brick aggregate 40 mm Nominal size) excluding cost of centering & shuttering all work upto floor V lavel. (Under Floors) including all carriage complete

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering grade. All work upto linth level in 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded crushed stone agg. 20mm nominal size) crushed including all carriage complete

Providing and laying reinforced cement concrete 1:1.5:3 ( 1 cement :1.5 coarse sand :3 graded crushed stone aggregate 20mm nominal size ) beams, suspended floors, landings balconies & staircases etc. having upto 15° slope excluding cost of centering, shuttering all work upto floor V level incl. all carriges complete

Providing and laying damp proof course 50 mm thick with cement concrete. 1:2:4 ( 1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm Nominal size crushed) incl. all carriages complete.

Providing and laying coping of 40mm thick cement concrete 1:2:4 (1 cement:2 corse sand : 4 graded stone aggregate 12.5 mm nominal size, Including all carriages complete

Providing and laying 50 mm thick cement concrete flooring without neat coat in 1:2:4 ( 1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm Nominal size crushed) incl. all carriages complete.

Providing and laying 1.4 mm thick Dura Vapour Barrier of denisity 5.5 Kg per mtr. water vapour transmission rate should not exceed 5g/Sqm/day of supreme/ another approved make

Centring and shuttering including strutting, propping etc. and removal of form for.

Foundations, footings, bases of columns etc. for mass concrete.

Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Suspended floors, roofs,landings, balconies and access platform.

Reinforcement for R.C.C work incuding straightening cutting, bending, placing in position and binding all complete, Thermo - Mechanically treated bars of specified grade) (TMT)

Brick work with common burntclay F.P.S (non-modular) bricks of class designated 75 in foundation and Plinth in cement mortar 1:6 (1 : cement 6: coarse sand) including extra for brick work in Super Structure above plinth level upto floor V level (By Manual means) including all carriages complete.

Half brick masonry with bricks of class designation 75 in foundations and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including extra for hlaf brick masonry in superstructure above plinth level upto floor V level & extra for providing and placing in position 2 Nos. 6 mm dia M.S bars at every third course of half brick masonary with F.P.S bricks. including all carriages complete.

Providing and fixing 15 mm thick ,150 mm wide pelment of flat pressed 3 layers or graded wood particale voard medium density grade ISI :3087 marked including top cover of 6 mm commercial ply wood conforming to IS:303 BWR Grade Nickle flated M.S pipe 20 mm dia (heavytype) curtain rod etc.

Providing and fixing teak wood lipping of size 25x3 mm in pelmet

10 cm. thick (Average) mud phaska of damped brick earth on roof laid to slope consolidated and plastered with 25mm thick mud mortar mixed with bhusa at 35 kg per cum of earth and gobri leaping with mix 1:1 (1 clay:1 cow dung) and covered with flat tile bricks of class designation 100 grouted with cement mortar 1:3 (1 cement:3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finishing neat withhand moulded F.P.S brick tiles including (all carriages) complete

Providing and laying APP (Atactic PolyPropylene Polymer) modified prefabricated five layer, 3mm thick water proofing membrane, black finished reinforced with glass fibre mat consisting of a coat of bitumen primer for bitumen membrane @ 0.40 ltr/sq. mt. by the same membrane manufacture. of density at 25*C, 0.87- 0.89 kglltr and viscosity 70-160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete.The vital physical and chemical parameters of themembrane shall be as under.Joint sf rength in longitudinal and transverse direction at 23*C as 350/300 N/5cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point ofmembrane not less than 150*C. Cold flexibility shall beupto -2*C when tested in accordance with ASTM, D-5147. The laying of membrane shall be got done through theauthorised applicator of the manufacturer of membrane.25.19.1 3 mm thick (For Corrugated roof sheets)

Providing gola 75x75mm in cement concrete 1:2:4 (1 cement:2 coarse sand:4 stone aggregate 10mm down gauge) including finishing with cement mortar 1:3 (1 cement:3 fine sand) as per standard design, in 75x75mm deep chase Including (all carriages) complete

Making khurras 45x45cm with average minimum thickness of 5cm cement concrete 1:2:4 (1cement :2 coarse sand :4 graded stone aggregate of 20mm nominal size) over PVC sheet 1mx1mx400 micron, finished with 12 mm cement plaster 1:3 (1 cement:3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete, Including (all carriages) complete.

6mm cement plaster to ceiling of mix 1:3 (1 cement :3 fine sand.(incl. all carriages) complete.

15 mm cement plaster on rough side of single or half brick wall of mix 1:6 (1 cement :6 fine sand) incl. (all carriages) complete.

12 mm cement plaster of mix 1:6 (1 cement :6 fine sand) incl. (all carriages) complete.

Providing & applying white cement based putty of average thickness 1mm of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Applying one coat of water thinable cement primer of approved brand and manufacture on wall surface.

Finishing walls with textured exterior paint of required shade on new work (two or more coats applied @ 3.28 litre/10sqm over and including base coat of water proofing cement paint applied @2.20Kg/10 Sqm

Making plinth protection 50mm thick of cement conc. 1:3:6 (1cement : 3 coarse sand : 6 graded stone agg.) 20mm nominal size over 75mm bed of dry brick ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand incl. finishing the top smooth. (crushed) (incl. all carriges) complete.

Providing and fixing Gang Sawcut mirror polished (pre-moulded & pre-polished) machine cut for kitchen platform,vanity counter, window sills facias, stair cases, corridor floors and similar location of requried size of approved shade, colour and texture laid over 20mm thick base cement mortor 1:4 (1 cement :4 coarse sand) with joints treated with white cement, mixed with matching pigment epoxy touch ups. including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels (Area of slab over 0.5 sqm) 16 mm thick Granite of any colour and shape (incl. all carriages) complete.

Providing and fixing gang saw cut mirror polished (pre moalded and pre polished) machine cut for kitchen, platform, vanity counters, window sills facias and similar locations of required size of approved shade colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement matching pigment, epoxy touch ups including rubbing moulding and polishing to edge to give high gloss finisg etc complete at all levels. (Area of slab upto 0.5 sqm) 16 mm thick Granite of any colour and shape (incl. all carriages) complete.

Extra for providing edge moulding to 18 mm thick Granite stone counters, vanities etc. including machine polishing to edge to give high glass finish etc complete as per design approved by Engineer-in-Charge

Extra for providing opening of required size and shape for wash basins/ Kitchen sink in kitchen platform, vanity counters and similar location in marble/ stone work including necessary holes for pillar taps etc. including rubbing and polishing of cut edges etc.

Providing and laying vitrified floor tiles in different sizes of make SOMANY , KAJARIA, RAK (thickness to be specified by the manufacturer) with water absorption less than 0.08% of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement:4 coarse sand) including grouting the joints with cement and matching pigments etc. size of tile 60x60 cm (incl. all carriages) complete. premium quality

Providing and fixing ceramic floor tiles 300x300 (thickness to specified by the manufacturers) of Ist quality conforming to IS: 13755 of SOMANY KAJARIA, RAK in colour, such as White, Ivory, Gray,Fume Red, Brown laid on 20mm thick bed of cement Mortar 1:4 (1 cement: 4 coarse sand) including pointing the joints whith white cement and matching pigment etc. complete.(incl. all carriages) complete. Premium quality

Providing and fixing Ist quality ceramic glazed tiles conforming to IS:13753 of minimum thickness 5 mm of approved make like SOMANY KAJARIA RAK in all colour, shades except begundy, bottel green, black of any size as approved by Engineer-in-charge in skirting, riser of steps and dodos over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement sullary @3.3 Kg per sqm. including pointing in white cement mixed with pigment of matching shade complete. (incl. all carriages) complete. Premium quality

Providing & fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent of dyed to required colour or shade with necessary screws etc. complete.

Providing & fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent of dyed to required colour or shade with necessary screws etc. complete.

Providing & fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent of dyed to required colour or shade with necessary screws etc. complete. Twin rubber stopper.

Providing & fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with nuts and screws etc complete

Providing and fixing IS :3564 marked Aluminium extruded section body tubular type universal hydraulic door closer (having superior brand) embossed on the body, door weight upto 36-80 kg and door width upto 700 mm with necessary accessories and screws etc. complete.

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels.plates etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts compete, i/c fixing the railing with necessary accessories and staimnless steel dash fasteners, stainless steel bolts etc. of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-Charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nut, bolts, fasteners etc.

Providing and laying water proofing treatment in sunken portion of WCs, bathrooms etc by applying cement sullary mixed with water proofing cement compound consisting of applying. a) First layer of slurry of cement @0.488 Kg/Sqm mixed with water proofing cement compound @0.253 Kg/ Sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @0.242 Kg/Sqm mixed with water proofing cement compound @0.126 Kg/ Sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rates includes prepartation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonary with polymer mixed slurry. (incl. all carriages) complete.

Providing and fixing water closet squatting pan (Indian Type W.C. pan) with 100 mm sand cost iron P or S trap, 10 ltr low level P.V.C flushing cistern including flush pipe (of approved make) manually controlled device (handle lever) conforming to I.S: 7231 with all fittings and fixtures complete, including cutting and making good the walls and floors wherever requried orissa pattern white vitreous china W.C pan of size 580x440 mm with integral type footrest (HINDWARE/CERA/PARRYWARE)

Providing and fixing white vitreous china pedestal type water closet of make Cera, Hindware or as approved by Engineer-in-charge. (European type W.C pan) with seat and lid 10 ltr low level white P.V.C flushing cistern including flush pipe with manually controlled device (handle lever) conforming to I.S: 7231 with all fittings and fixtures complete including cutting and making good the walls and floors wherever requried W.C Pan with ISI marked white solid plastic seat and lid.

Providing and Fixing white Vitreous China flat back half stall urinal basin of 589x380x350 mm with White P.V.C automatic flushing Cistern, of approved make with fittings, C.I/ M.S brackets, Standard size of C.P brass flush pipe, spreaders with unions and clamps complete, (all in C.P. brass) with waste fittings as per IS:2556, C.I. trap with outlet grating and other couplings in C.P. brass including painting of fittings and brackets, cutting and making good the walls and floors wherever required. Single half stall urinal with 5 litre white P.V.C automatic flushing cistern of approved quality,complete.

Providing and fixing White Vitreous China wash basin with C.I/MS brackets, 15 mm C.P. brass pillar taps, 32 mm C.P brass waste coupling of standard pattern, including painting fitting and Brackets,cutting and making good the wall wherever requried flat black wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps, complete

Providing and fixing salem stainless steel A ISI 304 (18/8) kitchen sink as per I.S 13983 with C.I brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever requried kitchen sink with drain board 510 x 1040 mm bowl depth 250 mm.

Providing and fixing of mirror of superior glass (of approved quality) and of requried shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing. Rectangular shape 600 x 400 mm

Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C.P brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs, etc. complete.

Providing and fixing on wall face unplasticised - Rigid PVC rain water pipes conforming to I.S 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. 110 MM dia pipe

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5 mm size with top and bottom rail of T-iron 40x40x6mm with 40 mm dia, steel pulleys complete with bolts, nits locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.

Providing and fixing 1 mm thick M.S steel door with frame of 40x40x6mm angle iron and 3mm M.S gusset plates at the junctions and cornors, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S angles 40x60x6mm for diagonal braces

Supplying and fixing rolling shutters of approved make, made of required size M.S laths interlocked together through their entire length and joined tiogrther at the end by end locks mounterd on specially designed pipe shaft with brackets, side guides and arrangments for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5 cm long wire springs manufacture from high tensile steel wire of adequate strength confirming to IS 4454 part 1 and M.S top cover of required thickness for rolling shutter 80x1.25 mm M.S laths with 1.25 mm thick top cover

Providing and fixing and applying plaster of pairs (POP) false ceiling consisting of frame work made with 50 mm sq.M.S tubes of 18 G thickness as main runner at 600 mm c/c both tubes ways, suspended.supported with M.S flats 25x4 mm from existing R.C.C slab including providing and fixing expanded mental of size 5.25 mmx1.25 mm thickness welded to main runners and applying POP (calcium suphate semihydate variety) to the expanded metal of thickness not less than 10 mm finished smooth to line and level including necessary supprts scaffolding etc. as required and also including applying a coat of red oxide zinc chromate primer over the M.S fram work and suspenders complete.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI: 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid ISI license] (4No.@2000 ltr).

Providing and fixing of C.P brass waste coupling of make Jaquar, or as approved by Engineer-in-charge.

Providing and fixing PVC pipes of supreme, Prince, Finolax as approved by Engineer- in -charge of pressure @ 4 kg/cm2 and fittings including testing complete.

75 mm dia pipe

150 mm dia pipe

110 mm dia pipe

Plain bend 110mm dia pipe

Plain bend 75mm dia pipe

Door bend 110 mm dia

Door bend 75 mm dia

Vent Cowal 110 mm dia

Vent Cowal 75 mm dia

Floor trap

PVC TEE 75 mm

PVC TEE 110 mm

Constructing Brick masonary manhole in cement mortar 1:4 (1 cement :4 coarse sand )RCC top slab with 1:2:4 mix (1 cement : 2 coarse sand :4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finshed with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design. In side size 90x80 cm and 45 cm deep- including C.I cover with frame (light duty) 455 x 610 mm internal diamensions total cover and frame to be not less then 38 Kg ( weight of cover 23 kg and weight of frame 15 kg) with F.P.S bricks class designation 75 with crushed stone aggregate. incl. (all carrages ) complete.

Providing and laying cement concrete 1:2:4 mix in mix in retaining wall, return wall any thickness including attached pilaster, column, piers, abutments pillers, posts strats butternesses pillars, posts starts buttereness etc.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z-section and other sections of approved make conforming to IS 733 and IS 1285, fixed with dash fastener of required dia and size incl. necessary filling upto gaps at junctions i.e at top, bottom and sides with required EPDM rubber/ neoprane gasket felt etc. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required incl. cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless steel screws, all complete as per architectural drawing and the directions of Engineer-in-charge (glazing ,panelling and dash fasterner to be paid for reparately). For shutters of doors, windows & ventilators incl. providing and fixing hinges /pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprane gasket required (fittings shall be paid for separately). Powder coated aluminium (minium thickness of powder coated 50) 10 gauge

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z-section and other sections of approved make conforming to IS 733 and IS 1285, fixed with dash fastener of required dia and size incl. necessary filling upto gaps at junctions i.e at top, bottom and sides with required EPDM rubber/ neoprane gasket felt etc. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required incl. cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless steel screws, all complete as per architectural drawing and the directions of Engineer-in-charge (glazing ,panelling and dash fasterner to be paid for separately). For fixed portion and frame of door and windows. Powder coated aluminium (minimum thickness of powder coated 50 microns) 10 gauge

Providing and fixing anodised aluminium grill (anodised transpatent or dyed to required shade according to IS: 1868 minimum anodic coating of Grade AC 15) of approved design/pattern,with approved standard section and fixed to the existing windows frame with C.P brass/staimnless steel screws @200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge.(only weight of grill to be measured for payment)

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (confirming to IS 12823 grade I type II) in panelling fixed in aluminium doors, windows shutters and partition frames with C.P brass / stainless steel screws etc complete as per architectural drawing and directions of Engineer-in-charge. Pre laminated particle board with decorative lamination on both sides.

Providing and fixing glazing in aluminium door, windows, ventilator shutter and partitions etc with EPDM rubber / neoprene gasket etc complete as per the architectural drawing and directions of Engineer-in-charge (Cost of aluminium snap beading shall be paid in basic items with floating glass panes of 5.50 mm thickness (weight not less then 13.50 kg/Sqm.)

Providing and fixing double action hydraulic floor fixing of approved brand and manufacture IS : 6315 marked, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg for door, incl. cost of cutting floors embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece MS sheet outer box with slide plate etc complete as per the direction of Engineer-in-charge with stainless steel cover plate minimum 1.25 mm thickness.

Providing and fixing of Aluminium composite pannel of thickness 3 mm thick plainor metallic colour with required fixing system including base tube Aluminium section silicon 789 (Dowcrniing) hardware, seafolding labour etc. complete job colour green, grey, red, brown & blue (excl. cost of major in structure.

Providing and fixing 100 mm brass lock (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.

Providing and fixing multi wall polycarbonate sheet of 10 mm thickness (clear/transparent on third floor) after fabricating super structure/grid made of M.S hallow section pipes of ISI mark. The polycorbonate sheet has to be at interval of 7'.0" by using rubber gaskit integrated in top and bottom aluminiun profile of 50 mm width. The top profile has to be fixed using SDS (Self driving screws)/STS (Self tapping screws) integrated with EPDM washers. The silicon filling is to be done in joints and screw caps. the main rafter shall be 2.5"x2.5" M.S tube of gauge 10 and purlin 2.0" x 2.0" of gauge 12 and runner is of section 2.5"x2.5" fixed with plate 10 mm thickness. Vertical pipes shall be 150mm dia (ISI) medium of gauge 8 at the intervel of 7'-0" C/C (as per structural desgin and approve drawings) including priming and painting and fixing of 16 mm dia bolts with welding complete Job

Providing and fixing G.I pipes complete with G.I fittings and clamps, including cutting and making good the walls etc Internal work-Exposed on wall

15 mm dia nominal bore (Medium)

32 mm dia nominal bore (Medium)

40 mm dia nominal bore (Medium)

Making connection of G.I distribution branch with G.I main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete 25 to 40 mm nominal bore

Providing and fixing C.P stop cock (concealed) of standard desgin and of approved make conforming to IS: 8931 15 mm nominal bore

Providing and fixing C.P brass angle valve for basin mixer and gyser pionts off approved make conforming to IS: 8931 15 mm nominal bore

Providing and fixing gun metal gate valve with C.I wheel of approved quality (screwed end)

25 mm nominal bore

32 mm nominal bore

40 mm nominal bore

Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete semi rigid pipe 32 mm dia

Providing and fixing 10 mm sand cast iron grating for gully or floor trap

Providing and fixing C.P brass bib cock of approved quality conforming to IS :8931 15 mm nominal bore

Providing and fixing C.P brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore

Providing and fixing PTMT soap dish holder having length of 138 mm. breadth 102 mm. height of 75 mm with concealed fitting arrangments, weighing not less than 106gms.

Providing and fixing toilet paper holder C.P brass

Providing and fixing soil, waste and vent pipes sand cast iron S&S pipe as per IS: 1729

P/F M.S holder bat clamps of approved design to CI or SCI rain water pipes ambedded in and including cement concrete blocks 10x10x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone agg. 20mm nominal size) and cost of cutting holes and amkng good the walls etc.

75 mm diameter

100 mm diameter

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimum distance of 37 mm from wall facre with concealed fittings arrangments of approved quality and colour, weighing not lessthan 88 gms

Providing of fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangment of approved quality and colour 600 mm long towel rail with total length of 645 mm,78 mm wide and effective height of 88 mm, weighing not less than 190 gsm.

Providing & fixing curtain Rods of 1.25 mm thick chromium plated brass plate with two chromium plated brass Brackets fixed with C.P Brass screws & wooden plugs etc wherever necessary complete. 25mm dia

Honey-comb brick work 10/11.4 cm thick with bricks of class designation 75 in cement mortor 1:4 (1 cement:4 coarse sand)

Supply and filling of brick bats in sokage pit including all leads and lifts carriage complete

Providing and fixing cast iron frame and lid weight not less than 38 Kgs (23 Kg lid + 15 Kg frame) placed over septic tank for inspection

Clearing jungle including uprooting of rank vegetation,grass, brushwood, trees and saplings of girth upto 30cm measured at height of 1m above ground level and removal of rubbish upto a distance of 50m outside the periphery of the area cleared

Surface dressing of the ground including removing vegetation and in-equalities not exceeding15cm deep and disposal of rubbish, lead upto 50m and lift upto 1.5m in all kinds of soil.

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge.

Providing & fixing od anti-skid tiles in ramp for( specially abled persons) of superior quality including cost of material,labour,carraige etc complete. Note: The sample of the tile and size shall be approved from the higher authotities of the project.

Steel work welded in built up sections/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required in gratings, frames, guard bar, ladders, railings, brackets, gates & similar works.

Narinder Singh

Sumit Gupta

M/S JUGAL KISHORE