GE U(N) 47 2021 22 REPAIR TO FLOOR PLASTERING JOINERY INTERNAL WATER SUPPLY ETC IN OTM ACCN OF CH FHO AMSD UNDER AGE B R1 OF GE (NORTH) UDHAMPUR

Amount

Dismantling floor , hearth or wall tiling including cement mortar bedding ( but not backing ), removing and rubbish off the premises complete all as specified and directed by Engineer in charge

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer in charge

Demolition Stone slabs and tiles laid dry or dry beded or pointed of any description or thickness in floors, aprons etc complete all as specified and directed by Engineer in charge

Non skid coloured glazed ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm in floor etc, set and jointed in neat cement slurry and pointed in colour tile grout to match over including screed bed or bedding layer of mortar 15mm thk for laying floor finishes in CM(1:4) complete all as specified and directed by Engineer in charge

M & L for Coloured glazed ceramic coloured tiles 600 mm x 300 mm x 8 to 10mm thick on vertical surfaces of walls as in dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:4 and fair to recive tiles as in skirting/dado etc complete all as specified and directed by Engineer in charge

M&L for vitrified tiles light shade 10mm thick (square) polished , light shade, area of each tiles exc 0.64 sqm but n.exc 1.00Sq.m in floor etc, set and jointed and laid and pointed in colour tile grout incl 15mm thick screed bed in CM (1:4) complete all as specified and directed by Engineer in charge

M & L for black granite(of any type)stone slab 18 to 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing with rounding to edges of stone slabs one edg complete Including 10mm thick backing coat CM 1:4 complete all as specified and as directed by Engr-in-Charge.

Rendering 10 mm thick cement plaster on fair face of brick work or concrete surfaces of wall in cement mortar 1:6, finished even and smooth without using extra cement, complete all as specified and directed by Engineer in charge

Preparation of new plastered surfaces of wall and applying two coat of oil bound distemper over one coat of primer , including 1mm thick wall care putty complete all as specified and directed by Engr-in Charge ..

Demolition of brick work or stone masonry built in cement mortar including all quoines arches,pillar etc but excluding ashlar facing , dressed stone work and precast concrete articles complete all as specified and directed by Engineer in charge

M&L for Brick work with sub class 'B' bricks, straight or curved on plan, exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified.

Providing plain cement concrete 1:3:6, type C1 using 12.5 mm graded crushed stone aggregates as in cills, steps, seismic and other similar bands, parapets and railings up to 60 cm in height, coping, kneelers, apex stones , bed plates, kerbs not provided for including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed by Engineer in charge

M&L for providing 50 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection laid in alternate bays (n exc 2 Sqm each ) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and directed by Engineer in charge

M & L for water proofing treatment to the sunken portion area of each sunken portion exc 0.5 sqm but n.exc 1.50 sqm with removing of exiting treatment including WC & P/S trap and cleaning with wire brush , one coat of bitumen @ 1.7 Kg per sqm , 15mm th plaster in CM 1:4 on all sides, one 450mm long 32 mm dia spout .water proofing powder3% mixed by weight of cement. lime conctere measured seprately complete all as specified and directed by Engineer in charge

M&L for plain cement concrete 1:5:10 lean concrete as in filling in sunken floor/mass concrete complete all as specified and directed by Engineer in charge

S & F in replacement (Squatt pattern ) including cement concrete bedding , size 580 x 440mm including PVC 'P or s trap front and back inlet and with internal foot rests (excluding flushing cistern ) including flush pipe and connector pices of PVC and removed old CI Pipe including demolition of PCC uptp 450mm depthcomplete all as specified and directed by Engineer in charge

S & F in replacement One Piece Wash down water closet (Pedestal pattern), complete with Pedestal pan and P trap, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc.including PVC Seat and cover for pedestal pan and CP Jet alongwith flexible tube/pipe complete all as specified and directed by Engineer in charge

S & F in replacement Wash down water closet (Pedestal pattern), complete with Pedestal pan and P trap, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc.including PVC Seat and cover for pedestal pan and CP Jet alongwith flexible tube/pipecomplete all as specified and directed by Engineer in charge

S&F in replacement PVC low level flushing cistern of capacity 10 ltr. white with inlet, ball valve, float and handle including breckets, flush pipe of polyethylene of low or high density or PVC 32mm dia and connection to pipes complete all as specified and directed by Engineer in charge

S&F in replacement wash basins, vitreous china(flat back or angle back type) size 550 X 400mm, including cutting for and pinning in ends of brackets or erecting stand including CP waste coupling 32mm and pvc waste pipe 32mm borecomplete all as specified and directed by Engineer in charge

S & F in replacement for Vitreous China Urinal, half stall type, white (excluding flushing cistern, flush pipe ) but including urinal spreader with pvc connection 15mm size with PTMT nuts of length 450mm and PVC waste pipe of 32mm bore and CP waste Couplingcomplete all as specified and directed by Engineer in charge

S&F Toughned glass 12mm thick Partition (Size - 450mm x 1000mm) for Urinal fixed with blusters fastners and screws with raw plugs complete all as specified.

S&F in replacement for chromium plated, 15mm Swan Neck pillar cock, fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixedcomplete all as specified and directed by Engineer in charge

S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed by Engineer in charge

S&F in repairs PVC connection 15mm size with PTMT nuts of length 600mm. complete all as specified and directed by Engineer in charge

S&F in repairs Health faucet CP Brass with 8mm dia ,1 mtr long flexible tube with wall hook complete all as specified and directed by Engineer in charge

S&F jets of EWC's with required sizeof jet pipe (flexible) and connections etc complete all as specified and directed by Engineer in charge

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends swan necks, etc, including cleaning or removal to store (measured overall as fixed along the centre line over fitting and accessories) complete all as specified and directed by Engineer in charge

S&F PVC (SWR) pipes of bore 110mm single socketed in any length with rubber ring joints fixed to walls with stack clapms and fixed with nut and bolts complete all as specified.

S&F PVC (SWR) pipes of bore 75mm single socketed in any length with rubber ring joints fixed to walls with stack clapms and fixed with nut and bolts complete all as specified.

S&F PVC (SWR) bends with access door any radius of bore 110 mm complete all as specified and directed by Engineer in charge

S&F PVC (SWR) bends with access door any radius of bore 75 mm complete all as specified and directed by Engineer in charge

S&F PVC (SWR) pipes of bore 110mm single socketed in any length with rubber ring joints laid in floors complete all as specified and directed by Engineer in charge

S&F PVC (SWR) pipes of bore 75mm single socketed in any length with rubber ring joints laid in floors complete all as specified and directed by Engineer in charge

M&L for disconnection of PVC water storage tank at roof/staging, getting aside for cleaning, lowering and hoisting, if required, cleaning and removing all scales and dirt etc from PVC tanks of capacity exc 250 ltr but n exc 500 litre and from mouth of circulating pipes etc and washing with adequate qty of bleaching powder solution including removing of all vegetation in surrounding of the tanks and writing letters or figures (block Roman/Italik or Indian) not exceeding 30cm to write as cleaned on XX-XX-XX on each tank and writing stops,comma,short lines,dashes, hyphens,brackets complete all as specified and directed by Engineer in charge

All as above Item No. 35 but exc 500 Litre but n exc 1000 litre complete all as specified and directed by Engineer in charge

Dismantling water tanks and removing to store exc 250 litre but n exc 500 litre with all necessary fittingscomplete all as specified and directed by Engineer in charge

Dismantling water tanks and removing to store exc 500 litre but n exc 1000 litre with all necessary fittings complete all as specified and directed by Engineer in charge

Dismantling water tanks and removing to store exc 1000 litre but n exc 2000 litre with all necessary fittings complete all as specified.

M&L for 3 layer rotational moulded polyethylene water storage tanks white colour 500 ltr Capacity (Cylindrical vertical with closed top) with 20 mm ball valve, epoxy coated aluminum rod, plastic ball etc, hoisted and fixed in position including tank Nipple inlet and outlet and conneting pipes all as specified in SSR Part I complete all as specified & as directed.

M&L in repair for 3 layer rotational moulded polyethylene water storage tanks white colour 1000 ltr Capacity (Cylindrical vertical with closed top), including taking down existing water tank & disconnecting old RCC tank, with 20 mm ball valve, epoxy coated aluminum rod, plastic ball etc, hoisted and fixed in position including tank Nipple inlet and outlet and conneting pipes all as specified in SSR Part I complete all as specified & as directed.

Supply &Fixing in replacemetnt Rotational moulded (3 layered as per IS 12701) polythylene water storage tank cylindrical vertical with closed top hoisted capacity upto 2000 ltrs ISI marked with valid CMLNo and fixed in position all as specified and directed by Engr-in-Charge

Taking up or down steel tubing and connections, including cleaning for refixing or removal from site to store bore of pipe 15mm complete all as specified and directed by Engineer in charge

Taking up or down steel tubing and connections, including cleaning for refixing or removal from site to store bore of pipe 20mm complete all as specified and directed by Engineer in charge

Taking up or down steel tubing and connections, including cleaning for refixing or removal from site to store bore of pipe 25mm complete all as specified and directed by Engineer in charge

Supply & Fixing tubes , medium grade of bore size 15 mm including all fixing accerroies and laid in ceilings or laid in floors complete all as specified and directed by the Engr-in-charge.

Supply & Fixing tubes , medium grade of bore size 20 mm including all fixing accerroies and laid in ceilings or laid in floors complete all as specified and directed by the Engr-in-charge.

Supply & Fixing tubes , medium grade of bore size 25 mm including all fixing accerroies and laid in ceilings or laid in floors complete all as specified and directed by the Engr-in-charge.

Supply and fixing in replacement bib taps long body 15mm chroimum plated (ISI Marked with valid CML No) with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed including elbow/socket etc as required at site complete all as specified and directed by the Engr-in-charge.

Supply and fixing in repair CP shower with arm 15mm size 195mm long with bend of 45 degree with flange including taking down the existing UNSV shower of any type/shape complete all as specified and directed by the Engr-in-charge.

Supply and fixing in replacemetnt angle cock 15mm chromium plated fittin as required at site and taking down existing unserviceable angle cock complete all as specified and directed by the Engr-in-charge.

Supply and fixing in replacement stop valve Concealed type long shank chromium plated brass fancy screwed down high pressure with crutch or butterfly handle dia 15mm screwed both ends for iron pipe or for unions and fixed including fittings as required at site,complete all as specified and directed by the Engr-in-charge.

S&F in repair Plastic water closet seat cover, white, closed pattern with flat bottom, with mild steel chromium plated or aluminised hinging device complete all as specified and directed by the Engr-in-charge.

S&F looking Mirror of size 600mm X 450mm X 5mm thick with Plywoof commercial type fixed on back side and wooden frame compete all as specifed.

Taking down chowkats or frames of any type or description (without taking off shutters from frame) not exc 1.50 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and directed by the Engr-in-charge.

Taking down and Refixing in same opening of wooden/PVC shutters of any description after easing/cutting as per requirement exc 1.0 sqm but n.exc 2.0 sqm each shutter complete all as specified and directed by the Engr-in-charge.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube in opening as per complete all as specified and directed by the Engr-in-charge.

Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face supplying & fixing in frame at site as per specification & drawing complete all as specified and directed by the Engr-in-charge.

S&F Galvanised steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by the Engr-in-charge.

S&F 4.00 mm thick plain/pin headed sheet glass, ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed by the Engr-in-charge.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins or spring clips and providing and fixing new clips or pins complete all as specified and directed by the Engr-in-charge.

S&F 150mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed by the Engr-in-charge.

S&F 150 mm long aluminium handles, cast type, anodised and fixed complete all as specified and directed by the Engr-in-charge.

S&F 100mm long Stainless Steel Butt hinges, heavy weight, cold rolled and fixed complete all as specified and directed by the Engr-in-charge.

S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed by the Engr-in-charge.

S&F floor door stoper of 140mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring complete all as specified and directed by the Engr-in-charge.

S&F MS helical door spring 150mm size including roller and roller plate fixed to wooden or steel frames with welding etc complete all as specified and directed by the Engr-in-charge.

Taking down chowkats or frames (without taking off shutters from frame) exc 1.50 Sqm and not exc 4.00 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and directed by the Engr-in-charge.

S&F pressed steel frames, size 125 mm x 60 mm. for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, 1:2:4, type B-0 using 12.5 mm graded crushed stone aggregates filling inside hollow section etc complete all as specified and directed by the Engr-in-charge.

S&F 40 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides and both face is covered with decorative face sanmika (pattern and design directed by ENgr-in-Chatge) with lipping/frame to match and polished on sides of shutters complete all as specified and directed by the Engr-in-charge.

S&F 35 mm thick 2nd class hard wood glazed and skeleton factory made shutters (three panel) open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters complete all as specified and directed by the Engr-in-charge.

S&F 25 mm thick Flush shutters, for cupboard shutters and shelves solid core construction, with block board core and plywood face panels, commercial type on both sides and one face is covered with decorative face veneer with lipping/frame to match and polished on back side and sides of shutterscomplete all as specified and directed by the Engr-in-charge.

Repair to aluminium door or window of any size, shape and description including easing, cutting, drilling, including provn of parts such as rubber gasket, blanket cloth, etc to make door or window fully functionalcomplete all as specified and directed by the Engr-in-charge.

S&F Mortice lock with two lever Mild Steel body (vertical type) 100mm length of latch with 3 set of keys fixed in door shutter with proper in position complete all as specified and directed by the Engr-in-charge.

S & F powder coated (of approved colour ) aluminium sections as in frame & shutter of doors, windows (Hung/sliding), ventilators (louvers/fixed type) and fixed frame etc fixed to wall including, preparation of disturbed portion both side (internal & external surfaces of wall) match with existing surface treatment and all sides of aluminium frame shall be sealed with silicon sealent (inner/outer face)complete all as specified and directed by the Engr-in-charge.

S & F powder coated aluminium Deco grill DG 202 pattrn with apperture of size 60x45mm securing with suitable aluminium channel to frame complete all as specified as directed by Engr-In-Charge.

S & F Glazing with 5mm thick frosted/tinted sheet glass exc 0.50 sqm in each panel fixed to aluminium section of doors, windows and fixed frame with suitable EPDM rubber packing and powder coated aluminium beading to frame complete all as specified.

S&F 600mm long Stainless Steel Grade 304 SS Handles for aluminium Shutters fixed with necessary fittings complete all as specified

S&F in repairs door closers of aluminium die cast body hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to1000 mm in width and of weight between 61 to 80 kgs and fixed complete all as specified and directed by the Engr-in-charge.

S&F in repairs floor door Machine suitable for aluminium glass door shutters of 851 to1000 mm in width and of weight between 61 to 80 kgs and fixed complete all as specified and directed by the Engr-in-charge.

Taking down Shutters of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed by the Engr-in-charge.

Taking down Chowkats or frames exc 1.5 sq. m but n exc 4 sq m each with shutters (without taking off shutters from the frames) complete all as specified and directed by the Engr-in-charge.

S&F Oval Top counter wash basins, (size and design decided by GE) vitreous china fixed over granite slab/RCC slab including CP waste coupling 32mm and CP brass Bottle trap 32mm bore including 32mm HDPE pipe bend fixed to wall etc as in waste pipe and 300mm long complete all as specified and directed by the Engr-in-charge.

NARESH KUMAR KHAJURIA

TULSI RAINA AND SONS