M/o Office Building Vikas Minar.

Supplying, Installation, testing & Commissioning of Ceiling Speaker a) Driver: Full Range Driver Size: 3/4" - 1" tweeter + 6.5" full range driver b) Power handling: not less than 50 Watt or more c) Nominal Impedance: 8 Ohm or 16 Ohm and 70/100V Transformer Tap d) Transformer Taps: 30W/ 15W / 7.5W e) Frequency Response : Range (-10 dB) 85 Hz - 19 kHz f) Dispersion – 110 degree or better g) Sensitivity: minimum 88 dB or higher h) Design: Border / Borderless i) Material: Aluminium membrane Complete with all mounting accessories. It is inclusive of detailed conditions, re- doing till the satisfaction, getting the desired functionality complete etc. as required. Certifications: CE,UL,RoHS,FCC

Supply, installation, testing and commissioning of min 8x2" column speaker, Having minimum 8x2" full range driver. Transformer Taps min 30W/60W Frequency Range Min 80 Hz to 20 kHz Should be able to handle 150W Peak Transformer Taps 60/30 W Sensitivity minimum 93 dB @1m or better Should comply to CE, UL supplied with Swivel Pan/Tilt wall mounting kit

Supply installation testing and commissioning of Integrated Chairman Audio Conference Unit a) Mount Type: Sleek flush mount b) Buttons: 'Push to talk' and 'Look at me' feature and integrated LED, Priority button & 'Next in line' button c) Audio : Build in Speaker (min. 1 W) , with mic connector d) Connectivity: 2 x RJ 45 ethernet port (IN/OUT - interchangeable). Loop through, daisy-chain cabling (non-proprietary). e) Microphone Dynamic range: > 90 dB or better f) Frequency response: 20-20,000 Hz or better h) Short Stem Removable microphone Size: Max. size < 110 × 40 × 40 mm with duel indicating LED. i) Connector : Push and lock connector j) Polar Pattern: Cardioid. k) Max SPL @ 1kHz: 105 dB SPL or better l) Signal-to-noise ratio referred to 1 Pa: 74 dB or better m) Sensitivity @ 1 kHz : -35 dBV/Pa or better p) Certification: CE, UL,FCC, BIS. Complete as required with all accessories (Inter connecting cables etc). It is inclusive of detailed conditions, re-doing till the satisfaction, getting the desired functionality complete etc. as required.

Supply installation testing and commissioning of Integrated Delegate Audio Conference Unit a) Mount Type:Table flush mount b) Button: 'Push to talk' with 'Look at me' feature and integrated LED c) Audio : No inbuilt Speaker (without speaker) , with mic connector d) Connectivity: 2 x RJ 45 ethernet port (IN/OUT - interchangeable). Loop through, daisy-chain cabling (non-proprietary). e) Microphone Dynamic range: > 90 dB or better f) Frequency response: 20-20,000 Hz or better g) Short Stem Removable microphone Size: Max. size < 110 × 40 × 40 mm with duel indicator LED. h) Connector : Push and lock connector i) Polar Pattern: Cardioid. j) Max SPL @ 1kHz: 105 dB SPL or better k) Signal-to-noise ratio referred to 1 Pa: 74 dB or better l) Sensitivity @ 1 kHz : -35 dBV/Pa or better m) Frequency response: 125 to 15000 Hz or better n) Certification: CE,UL,FCC, BIS. Complete as required with all accessories (Inter connecting cables etc). It is inclusive of detailed conditions, re-doing till the satisfaction, getting the desired functionality complete etc. as requird.

Supply of separate power supply unit designed specifically for reliable operation of the conferencing infrastructure. power supply shall be equipped with a secure lockable connector to ensure firm connection and prevent accidental disconnection during operation. The unit shall be capable of delivering a minimum continuous power output of 220 watts or higher, suitable for supporting the connected conference devices. The power supply shall be sourced from the same OEM as the conference system and shall be fully compatible with the supplied equipment for stable and uninterrupted performance, complete etc. as required.

Supply installation testing and comissioning of fully digital conference system controller audio processing ,Integrated dynamics processor with programmable noise gate, AGC, and limiter, Should support microphone modes: Direct Speak, Request, Group Discussion, Operator, Hands-Free. Should Front controls: Power On/Off and system volume dial; DLP switch for conference port power. Should have Browser based configuration and monitoring.Connectivity: minimum 2× power connectors, 4× conference network ports, 1× USB 2.0, 1× LAN, 1× balanced XLR in, 1× balanced XLR out, 2× unbalanced inputs, 2× unbalanced outputs, and 2+ Dante ports.Recording: 8 GB internal storage and external USB (up to 500 GB); MP3 recording with single-button start/stop and LED indicator.Features: audio routing, network monitoring, diagnostics, camera control(with third party or or using external OEM certified DSP / product of approved make)) Should Supports voting and interpretation (11+floor, expandable to 63+floor).19" rack-mount; power supply must be from the same OEM. Certification CE ,BIS, complete etc. as required.

Supply of a web-based Conference Management and Audio Routing Software enabling centralized control of microphones, featuring an easy configuration wizard and room layout setup; the system shall support password-protected roles (Operator, Chairperson, Signage), meeting templates with delegate seating, optional badge/RFID login and audio recording, speaker and request list management with drag-and-drop, meeting and voting views with automatic switching, and signage display, while the routing software shall offer advanced audio routing with customizable configurations, input/output and Dante level management, delegate dynamics, mix-minus configuration, and activation, editing, duplication, or deletion of audio profiles, all as per OEM specifications and requirements.

Supply Installation, Testing and comissioning of fixed / Modular I/O digital signal processor with minimum 4 mic/LIne inputs expandable upto 10 balanced analog mic/line inputs with AEC and 8 balanced analog outputs, 12 Logic Inputs and 6 Logic outputs, along with USB Module (Inbuilt / External) for VC Integrationand audio input supporting 16- or 24-bit depth, up to 8 channels at 48 kHz, and 32×32 Dante/AES67 networked audio. Balanced inputs feature an 3 kΩ or better impedance, Audio performance includes a 20 Hz–20 kHz frequency response (+0.25/−0.5 dB), EIN < −125 dBu, dynamic range >108 dB, and channel-to-channel crosstalk better than −75 dB at 1 kHz. The unit operates at a 48 kHz sampling rate with 24-bit A/D and D/A converters, and expandable to integrates telephone interface, RJ45 LAN Port, Serial port for programming complete etc. as required.

SITC of multifunctional device capable of operating as both a transmitter and receiver. It shall utilize license-free digital enhanced cordless Telecommunication radio technology with automatic frequency management, operating within the 1,880 to 1,900 MHz range, with transmission power up to 250 mW (peak) or better, and an operating range of up to 300 meters outdoors (line of sight) or better. A Receiver shall support a minimum of four wireless audio channels and up to 32 channels, with the capability to synchronize eight or more receivers within a single network. The unit shall feature two or more integrated omnidirectional antennas, a digital Dante interface (4 In / 4 Out), Ethernet interface, and four balanced analogue inputs and outputs. It shall support Power over Ethernet (PoE) for power supply. The system shall allow configuration, monitoring, maintenance, comprehensive setup, and pairing through Windows-based software. The device shall be CE certified.

SITC of digital handheld transmitter with inbuilt DSP for automatic gain control and background noise reduction, featuring a low-feedback cardioid polar pattern and dual integrated antennas for stable transmission. It shall support AES-256 encrypted digital enhanced cordless telecommunication operation in the 1,880–1,900 MHz band, with up to 250 mW (peak) transmission power and up to 300 m outdoor (LOS) range. The unit shall include Bluetooth connectivity, USB Type-C audio I/O and charging, OLED display, programmable mute with LED indication, and menu navigation controls. It shall operate on a replaceable Li-ion battery with minimum 20 hours backup. Latency shall be: Master – HD ≤22 ms, SD ≤18 ms; Sub-master – HD ≤17.5 ms, SD ≤13.5 ms. The system shall support up to three simultaneous microphones and allow configuration and pairing via PC software. Charging time shall be ≤4.5 hours (charger) and ≤12 hours (USB, device off). Certifications: CE, BIS.

SITC of digital bodypack transmitter that can operate in the 1,880–1,900 MHz band with up to 250 mW (peak) RF output and up to 300 m (LOS) range, supporting AES-256 encrypted, bi-directional audio and up to three simultaneous transmitters. It shall feature integrated DSP (ALC, noise gate, noise cancellation, compressor, EQ, low-cut, ducker), Bluetooth connectivity, USB Type-C audio I/O and charging, internal microphone, headset input (mini jack/4-pin mini-XLR), 3.5 mm line-in, OLED display, and dedicated control buttons, with configuration via PC software. Latency: Master – HD ≤22 ms, SD ≤18 ms; Sub-master – HD ≤17.5 ms, SD ≤13.5 ms; audio bandwidth: 50 Hz–7 kHz (SD) and 50 Hz–14 kHz (HD) at -3 dB; powered by integrated Li-ion battery (>15 hrs). The clip-on microphone shall be an omnidirectional electret condenser (pressure principle), 20 Hz–20 kHz frequency response, 40 mV/Pa (-28 dBV) ±2.5 dB sensitivity, 126 dB max SPL, 51 dB SNR (CCIR), 32 dB(A) self-noise, 2–10 V DC supply (0.5 mA max), with 4-pin mini-XLR (female) connector. Certifications: CE, BIS.

SITC cockpit desktop charger that can charge integrated batteries of transmitters and receivers while storing from transmitter to receiver. It shall support network integration via Ethernet for firmware updates, pairing, maintenance, and monitoring through PC Manager software. The charger shall accommodate a minimum of 2 handheld or 4 bodypack units and provide status indication of charging and pairing, along with dedicated pairing, power, and reset buttons. Charging time shall be ≤4 hours. Certifications: CE, BIS.

SH-II Video Conferencing system Supply, Installation, Testing & Commissioning of 115" + 5% Diagonal All in one LED Display with Pixel Pitch of 0.65mm or less,3840x2160 or higher resolution, Brightness: 1000 or better nits , Contrast Ratio:5500:1, 50W or better Speaker Built-In, HDR Compatibility: Operating System: Tizen/ Linux /Android, Viewing Angle:160 Degrees, IP Rating: IP5x or better, Controller Built-In ,Minimum interfaces: 1xDP, 2xHDMI, 2x USB,Control:RJ45 & RS-232C,Multi screen connection, Wifi, Temperature, Humidity, Eco Sensor, IR remote controller, OEM Supplied wall mount bracket as per site requirement etc.

Providing, supplying, installing, testing, and commissioning of 55 inch 4K UHD LED display, having native resolution 3840 × 2160 pixels, panel type Edge LED BLU, brightness not less than 350 nits, contrast ratio not less than 4000:1, viewing angle 178° (Horizontal) and 178° (Vertical), complete with HDCP 2.2 compliance, connectivity ports comprising minimum 3 nos HDMI inputs, 2 nos USB 2.0 ports, audio input and audio output, built-in stereo speakers of 10 W + 10 W or better, control interfaces including Ethernet, RS-232, RJ-45 and IR, including all mounting hardware, accessories, interconnecting cables, power cords, testing, commissioning and demonstration to the satisfaction of Engineer-in-Charge, complete in all respects as per specifications and manufacturer’s recommendations.

"SITC of Full HD PTZ Camera @60 frames per second, Image Sensor: 1/2.8" 2.10 MP CMOS Sensor or better, Optical Zoom 12X or better, Digital Zoom 10x or better, Horizontal FoV 72 degree or better, Minimum illumination: 1.0 Lux or better, Pan Range: +170° ~ 170°, Tilt Range : +90° -30 Control Protocol: VISCA / VISCAIP / ONVIE, IP Streaming Protocol: H.264(RTMP,RTMPS/SRT) or better, Power: PoE/PoE+/PoE++DC, Power Consumption: 09 W or better, Camera should support simultaneous outputs through Ethernet, HDMI, 3G-SDI & USB 3.0, Audio In and can be controlled via RS232 & 422 In & Out & IP. Camera should support PoE and Virtual USB Driver. Camera can be controlled and managed through centralized software on network. Quoted model should be BIS, CE, FCC & RoHS Certified with Test Lab Reports, Ceiling/Wall mounting arrangement complete etc. as required.

Supply Installation Testing and Commissioning of Camera Processor for seamless switching of camera with AI Camera Automation through IP/ Hardware joystick, manual or auto switching, Single & Multi view output No. Of Camera Control: 4 X IP or More, Video Output: HDMI, USB, LAN or more, Control Protocol: Visca Over IP/ UVC, Network: 10/100 mbps or better, Power: ≤20 Watt, Shall be support soft client conference, Compatible with major Conferencing/Meeting. Platform: Teams, Zooms, WebX, Google Meet Etc. Complete with other standard accessories. Model Shall be BIS,CE,FCC & RoHS Certified.

Supply, Installation, Testing, and commissioning of cable cubby box to install into a table or horizontal surface for cable management having retractable lid/top flap which opens and hides within the enclosure so that connectivity inside the chassis is visible from all the side of cable cubby. And when the lid is closed, it should have small pass-through which allows cables to be fully extended outside when used, have easy access to all the cables and power port, and all these must be clearly visible and on surface level, not in hollow blackholes, so that users do not have to get up from the chairs to find connectivity. supplied with 2x Three pin Universal Power, 2x USBA Type Charging, Should be supplied with minimum 4 passthrough holes for AV cables, TAA compliant / IC3S (Indian Common Criteria Certification) compliant / Common Criteria, Compliance: UL, CE, FCC, RoHS/WEEE. (Additional BIS to be shared if applicable. All the required accessories to be included with the package, Additional hardware can be used to meet the requirement.

Providing, supplying, installing, testing and commissioning of AV over IP Encoder (Video Codec), OEM-based high-performance video processing unit supporting JPEG2000 or equivalent, complete in all respects as per specifications and directions of Engineer-in-Charge. Technical Specifications: Video Input: 1 × HDMI Video Output: 1 × RJ45 to be connected to decoder or network switch Control Ports: 2 × IR (Optional), 1 × Bidirectional RS-232 for controlling third-party devices, without the need for additional AV control cables Video Resolution: Up to 4096 × 2160 @ 60 Hz, 4:4:4, supporting HDR10+ and Dolby Vision Audio Formats: Dolby Digital®, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS®, DTS 96/24, DTS HD High Res, DTS HD Master Audio, LPCM up to 8 channels Content Protection: HDCP 2.3, AES 128 Network Security & Protocols: Active Directory® service authentication, 802.1X network access control, TLS, SSH, HTTPS, TCP/IP, UDP/IP, DHCP, SSL, SFTP (SSH File Transfer Protocol), IPv4/ IPv6 Certifications: JITC, FIPS, NIAP certified, TAA compliant, IC3S (Indian Common Criteria Certification) compliant / Common Criteria Compliance Standards: UL, CE, FCC, RoHS/WEEE (Additional BIS certification if applicable) Additional Requirements: Unit shall be fully configured, demonstrated and shown during installation. Any additional hardware necessary to meet the specified requirements shall be included. Including all accessories, mounting hardware, interconnecting cables, power supply, configuration, testing, commissioning, and demonstration to the satisfaction of Engineer-in-Charge, complete in all respects.

Providing, supplying, installing, testing and commissioning of AV over IP Decoder (Video Codec), OEM-based high-performance video processing unit supporting JPEG2000 or equivalent, complete in all respects as per specifications and directions of Engineer-in-Charge. Technical Specifications: Video Input: 1 × RJ45 Video Output: 1 × HDMI Control Ports: 1 × IR (Optional), 1 × Bidirectional RS-232 for controlling third-party devices without requiring additional AV control cables Video Resolution: Up to 4096 × 2160 @ 60 Hz, 4:4:4 Audio Formats: Dolby Digital®, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS®, DTS 96/24, DTS HD High Res, DTS HD Master Audio, LPCM up to 8 channels Audio Output: 1 × Stereo Line-Level Content Protection: HDCP 2.3, AES 128 Network Security & Protocols: Active Directory® authentication, 802.1X network access control, TLS, SSH, HTTPS; Ethernet port with TCP/IP, UDP/IP, DHCP, SSL, SFTP (SSH File Transfer Protocol), IPv4, IPv6 Configuration: Unit shall be fully configured and demonstrated during installation Certifications: TAA compliant, IC3S (Indian Common Criteria Certification) compliant / Common Criteria Compliance Standards: UL, CE, FCC, RoHS/WEEE (Additional BIS certification if applicable) Power Supply: Supplied from same OEM Additional Requirements: Any additional hardware required to meet the specifications shall be included. Including all accessories, mounting hardware, interconnecting cables, power supply, configuration, testing, commissioning, and demonstration to the satisfaction of Engineer-in-Charge, complete in all respects.

Providing, supplying, installing, testing and commissioning of AV control system with wireless touch-screen interface, complete with all accessories, interconnections, power supply, and as per technical specifications and directions of Engineer-in-Charge. Technical Specifications: Processor: Quad-Core / Multi-Core CPU / Ultra-Fast processor for faster processing and advanced automation, capable of controlling two rooms simultaneously for future-proofing and backup Network Security & Protocols: Active Directory® service authentication, 802.1X network access control, TLS, SSH, HTTPS, TCP/IP, UDP/IP, DHCP, SSL, SFTP, IPv4, IPv6 Certifications: FIPS, NIAP certified, TAA compliant, IC3S (Indian Common Criteria Certification) compliant / Common Criteria Memory: Minimum 2 GB SDRAM, minimum 8 GB flash memory Control Ports: 2 × IR / Serial or More 1 × Bidirectional RS-422 / RS-485 2 × Bidirectional RS-232 4 × I/O or More 4 × Low-voltage relay or more Integration Protocols: BACnet for integration with third-party building management systems (HVAC, security, lighting automation, AV, and others) over Ethernet Wireless Touch Screen: Size: 10-inch Contrast: 800:1 Resolution: 1920 × 1200 pixels Color Depth: 24-bit, 16.7M colors Brightness: 350 nits (cd/m²) Viewing Angle: Min ±80° horizontal / ±80° vertical Memory: Minimum 4 GB RAM, Minimum 30 GB storage Wireless Coverage: Minimum 50 ft / 15 m range Wi-Fi® Support: 2.4 GHz and 5 GHz (Wi-Fi 5) Other Features: Fully configured, tested, and commissioned; as per OEM technical specifications Cabling & Accessories: Complete with all required connectors, mounting hardware, power supply, and installation accessories Including testing, commissioning, configuration, and demonstration to the satisfaction of Engineer- in-Charge, complete in all respects.

Supply Installation Testing and Commissioning of 4K Wireless presentation and wireless collaboration device having Resolution: 4K(3840 X 2 I 60 @ 30Hz) or Better, simultaneously sources: up to 4 screen, wireless presentation: Mira cast, Air play(iOs), Window OS. Wireless Application support for window, Mac & Android, Shall be capable for Wireless Conferencing through wireless/peripheral via USB (2 Dongles to be supplied) using which the content shall be shared without the need to download any app, no need to run any plugin or software , Wired Input: I X HDMI (1080p @60Hz) or better, Network: Dual band Wifi, Power: POE/POE+/DC, Shall require audio output port, Connectivity port: HDMI In/out, Ethernet, USS., having control via 3rd Party device, Content Protection: HDCP Support, Compliance: UL, CE, FCC, RoHS (Additional BIS to be shared if applicable),Network security protocols Active Directory® service authentication, 802.lX network access control, TLS, SSH, AES content encryption and HTTPS compete with software and connection, complete etc. as required

SITC of Network Switch -24 # 1G Base-T Copper PoE+ Ports, 02 # 1G Base-T Copper Ports, 4 # 10G Base-X Fiber SFP+ Ports,Ethernet: Out-of-band 1G port, Console: RJ45 RS232, Console: USB-C, Storage: USB-A, PSU with On/Off switch, 1U Rackmount,Quad-Core Cortex-A57 ARMv8 1.8Ghz 64-bit, 2GB RAM, Flash: 256 MB, Packet buffer memory: 16 MB,Switching fabric: 132 Gbps Line-Rate (non blocking fabric), Throughput : Min. 98.21 Mpps, IP Multicast Routing Entries : 512 IPv4 & 128 IPv6, 16,000 MAC addresses (48-bit MAC address), Number of VLANs: 4,093 (IEEE 802.1Q) simultaneously, Jumbo Frames Up to 12K, 480W PoE Power Budget,Multicast IGMP Group membership : 2K IPv4 & 2K IPv6, DHCP Server: IPv4: 256 pools Pre-configured for audio and video over IP out of the box with zero touch configuration, For audio, profiles for Dante, Q-SYS and AES67 AVB lincese should be available, Auto-Trunk and Auto-LAG,static, RIP and PIM-SM, DM and SSM multicast routing, DHCP Server and Pv2 Transparent Clock, Mean Time Between Failures (MTBF): 509,000 hours or more,Industry standard SNMP, RMON, MIB, AAA, sFlow, RSPAN and PTPv2, Voice VLAN with SIP, H323 and SCCP protocols detection, Number of IP interfaces 128, Multicast VLAN Registration Protocol (MVRP),Per port: Speed, link, activity, PoE,IEEE 802.1p CoS, DiffServ QoS, WRED, Single Rate Policing, Strict Priority queue technology, Auto-VoIP, MAC ACL Support, IP Precedence, Interface Traffic Shaping, PHB Support,RIPv1/RIPv2, Policy Based Routing (PBR), 802.1x MAC Address Authentication Bypass (MAB), IEEE 1588 PTPv2, IEEE 802.1BA-2011 Audio Video Bridging (AVB), IGMPv3 MLDv2 Snooping, Proxy ASM & SSM,Control Packet Flooding, 802.1AS, 802.1Qav, 802.1Qat MSRP, 802.1ak MMRP, 802.1ak MVRP, Per VLAN Rapid STP (PVRSTP), BPDU/STRG Root Guard, VLAN routing, DHCP Relay, Stateful DHCPv6 Server.

SH-III (Audio Accessories & Switching) Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface /recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required.

Speaker cable Single pair, 2-core, 1.5 sqmm

Supply and Laying of following size HDMI tinned copper Cable with Videeo Resolution upto 4K@60Hz (4:4:4)High Data Transfer Rated upto 18 Gbps, HDMI Compliance with HDCP 2.2 , HDR-10, HLG, Dolby Vision, ARC, EDID and CEC, Deep colour Deep Color and x.v.Colo , 5.1/7.1 lossless Dolby, TrueHD and DTS-HD Master Audio,ll-resistant: K-Loc, connectors with 15lbs of restraining force,UL listed, CL3/FT4 rated for in-wall installations, Triple shielded for maximum EMI protection, PVC outer sheathe, Black in Colour temperature rating 80 degree celcious,, voltage rating 30V,Conductor Resistance 32AWG: 588 Ω/km; 28AWG: 237.25588 Ω/km 26AWG: 148.94 Ω/km; 24AWG: 381 Ω/km, Power Consumption 90mA (18Gbps) / 1mA (standby mode), Male HDMI Type A, 24K gold-plated K-Lock connector complete etc as required.

3 Meter

9 Meter

5 Meter

Supplying and fixing 24U Rack with 4 inch Castor wheels and front brake Floor Standing Rack with Main Frame Pillar of 1.25mm Powder Coated CRCA Sheet with removable side panels, L-Shape adjustable vertical Mounting Rail of 2mm with 'U'Marking completely knocked-down condition (CKD) Shape, fitted with 4 number cooling fans, minimum 5nos two line cable entry/exit provision at top and bottom with rubber protection, Front door 5mm Toughened Glass with MS frame or MS perforated with Lock, Rear MS vented or perforated door, Powder coated Color- RAL-7035 or black, complied with UL & RoHS, 2 X 6 sockets 16 A power distribution units, 3 numbers closed cable organizer, Hardware mounting screws packet of 20 X 1 number, etx. complete as required

Supplying, drawing, Testing and commissioning of Cat6A UTP 4 pair, 23 AWG solid copper cable in existing conduit/ on surface, U/FTP, LSZH, Non- Plenum, Horizontal (solid) Cable suitable for high speed data networking application supporting upto 10Gbps over a 100 meter channel. The 4 Unshielded Twisted Pairs (UTP) cable with colour coded insulation for easy identification should have FLAME PROPERTIES i.e. Flammability Test - IEC 60332-1, Smoke Density - IEC 61034, LSZH standards compliance: ANSI/TIA-568 C.2, ISO/IEC 11801, IEEE 802.3an, RoHS. Delay Skew should be < 45NS. The outer Cable Diameter should be 7.5 + 2 mm. Cable should have been tested and verified by UL/ ETL etc.complete as required.

1 Run of cable

Buyback of existing audio conferencing sytem i/c mics, amplified, Controller,rack, wiring, old speakers etc.

PART- 2 Operation for 4 years and Comphrensive Maintenance After 2 Years of DLP ComphrensiveMaintenance :ComphrensiveMaintenanceof all the items in Part 1 after DLP period of 2 years.

3rd Year

4th Year

Operational Shift : Deployment of 1 No. of Electronic technecian cum operator for day to day operation and Preventive maintenance of all the accessories of conferencing system i/c audio conferencing system, video conferencing system complete etc. as required.

1 St DLP year

2nd DLP year

3rd Year

4th Year

Please Enable Macros to View BoQ information