8704/GWL/E8 SPECIAL REPAIR TO BLDG NO P-31 AND REPLACEMENT OF SHEETS IN BLDG P-152 TO P-157 AND CERTAIN MINOR WORK AT MORAR CANTT GWALIOR

Amount

Taking down chowkhat with shutter (without taking off shutters from the frames) not exc 1.5 sqm each complete all as specified and directed.

Taking down chowkhat with shutter (without taking off shutters from the frames) exc 1.5 sqm but nexc 4.0 sqm each complete all as specified and directed.

Taking down shutter of any description exc 1.0 sqm but nexc 2.00 sqm each complete all as specified and directed.

Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

S&F 2nd class hard wood as in plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put togather with glue and pinned at joints complete all as specified and directed.

S&F anodised aluminium frame powder coating (minimum thickness of powder coating 50 micron) for doors, with one or more rebates incl joining cleat to fixing etc complete all as specified.

S&F anodised aluminium door shutters powder coating (minimum thickness of powder coating 50 micron) aluminium section eighing 0.55 Kg/m incl necessary joing cleats, glazing clips, rubber neoprane packing, handles 02 Nos in each oor , hinges, anodised snap beading screw etc complete all as specified.

S&F for 18/19mm thick prelaminated particle board, interior grade, prelaninated one side with decorative choice lamination and other side balancing white lamination , fixed with screws to timber frame work complete all as specified and directed.

S&F for continuous (piano) Hinges , mild steel , bright finished or electrogalvanised, width of flap 30mm complete all as specified and directed.

S&F in repair 19/20mm thick block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame work , complete all as specified and directed.

S&F 75mm Hasp and Staple, safty type, aluminium anodised hinge pin , including bolt to hinge plate and fixed with screws complete all as specified and directed.

M&L mild steel work as in bands , straps, clamps, hold fasts, wall tiles, plain angle cleats for securing purlins, timber frame work and similaar small articles confirming to Fe-290 Gde E-165 complete all as specified and directed.

Dismantling of wall and ceiling boards fibre pulp insulation etc or insulation boards/slabs/blankets any thickness including cover fillets complete all as specified.

Dismantiling of stone slabs and tiles (Kota stone etc.) of any discription or any thickness in floors, aprons, skirting, dado etc. laid bedded and pointed in any mortar complete all as specified and directed.

M&L 75mm thick PCC (1:3:6) type C2 using 40mm graded stone agg as in plinth protection/Path/paving surface even and smooth complete all as specified and directed.

S&F suspended false ceiling using Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed

S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long, alongith bonded mineral wool blankets slab made from rock, density 48 kg/cum and fixed as per manufacturer’s instructions: 40mm thick complete all as specified and directed.

M&L Non asbestos fibre cement building boards 4mm thickness fixed or laid in ceilling / inserted to timber/GI/Aluminium framework with screws complete all as specified and directed.

Taking down plaster or lathing built in cement mortar hacking for key raking out joint and scrubing down with water complete all as specified and directed.

Dismantling of fillet rails, post, rafter, purlin etc under 40 Sqm in section in unframed work complete all as specified and directed..

S&F Pre painted galvalume aluminum zinc coating GI bassed corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa in roof covering fixed with self Tapping screw complete all as specified and directed.

Dismantling of structural steel works including door gates guard bars etc excluding framed truss etc complete all as specified and directed.

S&F MS Structural steel, rolled section such as joist, beam, channel, angle, tee,in available lengths Fe-410-W(Gde- E- 250) quality etc complete all as specified and directed.

Demolition of concrete ground floors and pavings n. exc. 15cm thickness (below or above ground level) unreinforced complete all as specified and directed.

Demolition of brickwork or stone/ boulders masonry built in cement mortar or cement lime mortar incl all quoins, arches, pillars etc. but not excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed.

M&L Brick work with sub class B bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:6) complete all as specified and directed.

Taking up or down steel tubing and connetion including cleaning for refixing or removing to store of 15mm bore of pipe complete all as specified and directed.

Taking up or down steel tubing and connetion including cleaning for refixing or removing to store of 20mm bore of pipe complete all as specified and directed.

Taking up or down steel tubing and connetion including cleaning for refixing or removing to store of 25mm bore of pipe complete all as specified and directed.

S&F laying of CPVC water pipes outer dia 20mm fitttings on walls/ceillings or laying in floors complete all as specified and directed.

S& F laying of CPVC water pipes outer dia 25mm fitttings on walls/ceillings or laying in floors complete all as specified and directed.

M&L 25 mm thick cement concrete (1:2:4) type B-0 (12.5 mm graded stone aggregate) as in floors,finish rough to receive the floor finishes etc complete all as specified and directed

M&L non skid ceramic colour tiles, 7 to 8 mm thick (square / rectangular ) area of each tiles exceeding 0.11 sqm but n exc. 0.18 sqm , in floor etc. set and jointed in neat cement slurry and pointed in colour cement to match complete all as specified and directed.

All as per items No 33 but of size 300x200x7mm thick in vertical surfaces of wall as in skirting or dado complete all as specified and directed.

M&L for rendering 10mm thick layer of cement mortar (1:4) for laying Wall Tiles complete all as specified and directed.

M&L 15 mm thick Screed bed or bedding layer of mortar (1:6) for laying floor finishes complete all as specified and directed.

M&L vetrified ceramic tiles dark shade 10mm thick (Square/rectangular)polished , area of each tiles not exc 0.36 sqm in floors etc set and joined in neat cement slurry and pointed in colour cement to match the shade of the slab complete all as specified and directed.

M&L vetrified ceramic tiles dark shade as in vertical surfaces , skirting ,dado rendering 10 mm thick over cement plaster laid and jointed with grey cement slurry mixed with pigments to match the shade of the slab complete all as specified and directed.

M&L Marble stone strip as in border etc in tile florring machine cut bedded jointed and jointed and pointed with grey cement slurry including cutting and polishing to mirror finish of makrana white complete all as specified and directed.

M&L renedering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed.

M & L two coat of oil bound distemper over a coat of Birla putty on plastered surfaces on wall incl. preparation of surfaces etc complete all as specified and directed.

M&L rendering 15mm thick in cement mortar 1:4 on other than fair faces of brick work or concrete surfaces of wall finished fair and even complete all as specified and directed.

M&L, applying two coats of cement base paint including preparation of newly plastered surface of walls complete all as specified and directed.

M&L for complete removal of exicting treatment on wall/ceiling including washing rubbing down and stopping of dictempered surfaces and preparation of surfaces complete all as specified and directed.

M&L for two coat of synthetic enamel paint over new/old prepared steel surface but over red oxide primer complete all as specified and directed.

M&L two coat of synthetic enamel paint over coat of Red oxide primer over steel surfaces nexc 10 cm width or girth complete all as specified and directed.

S&F PVC valveless syphonic action type flushing cistern low level white with inlet ball valve,float end handle including bracket complete of capacity 10 litres complete all as specified and directed.

S&F15mm,pillar taps, fancy type chromium plated,cast copper alloy, with capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe fixed in repair.(with ceramic disc spindle) complete all as specified and directed.

S&F 20 mm dia Ball valve/Gate valveof brass with lever type handle complete srewed for iron pipe fixed in repair complete all as specified and directed.

S&F 25 mm dia Ball valve/Gate valveof brass with lever type handle complete srewed for iron pipe fixed in repair complete all as specified and directed.

S&F15mm,CP angle cock fancy type chromium plated,cast copper alloy, with capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe fixed in repair.(with ceramic disc spindle) complete all as specified and directed.

S&F15mm ,bib tap , fancy type chromium plated,cast copper alloy, with capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe fixed in repair.(with ceramic disc spindle) complete all as specified and directed.

Dismantling of water tank of any description of up to 1000 ltr capacity complete all as specified and directed.

M & L rotational moulded poley water storage tanks (cylenderical vertical with screwed top ) hoisted and fixed in position all as specified in SSR Pt-I of capacity 1000 ltr incl. PVC Float valve of 20mm dia complete all as specified and directed.

S&F in repair water closet including provision of cement concrete bedding viterous china squatting pan orrisa pattern of size 580x440 mm white with integral foot rest etc excluding flushing cistern as in repair complete all as specified and directed.

S&F as in repair ball valves of PVC PTMT with epoxy coated aluminium rod and high dencity plastic ball complete of 20mm dia of pipe complete all as specified and directed.

S&F Vitreous china WHB size 630x450mm as in repair in cluding CI bracket PVC 32mm dia waste coupling waste pipe complete.(Oval type below counter Parryware)

S&F as in repair Vitreous china urinal stalk type white excluding flushing cictern complete all as specified and directed.

S&F 15mm dia PVC connection with PTMT nuts of length 450 mm complete all as specified and directed.

M & L 75 mm dia of out let PVC (SWR) floor trap plain with grating incl. jointing with solvent cement as in repair complete all as specified and directed.

S&F 110mm dia PVC(SWR)pipes single socketed, in any length with rubber ring joints,fixed to walls as in repair complete all as specified and directed.

S&F 75 mm dia PVC(SWR)pipes single socketed, in any length with rubber ring joints,laid in Wall/floor of floor as in repair complete all as specified and directed.

S&F 110mm dia PVC(SWR)pipes bends any radious with acces door complete all as specified and directed.

S&F 75 mm dia PVC(SWR)pipes bends any radious.with acces door complete all as specified and directed.

S&F 110mm dia PVC(SWR)pipes junction,single (single T/Y ) equal or unequal any radious.with acces door complete all as specified and directed.

S&F 110mm dia PVC(SWR) vent cowl complete all as specified and directed.

S&F solid PVC door frame of size 50mm×47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specifications and drawings complete all as specified and directed.

M&L Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC shut strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail& bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and directed.

S&F, Box type steel ventilator with top hung shutters (double shutters for glass and guaze) jointed together with an including grills using 12mm square bars @10 cm C/C as per TD No CEBZ/TD/14/2011 including box type hinges with steel handle and steel peg stay complete with glazing bars devetailed and welded complete all as specified and as directed. Note : Glass/guage shall be measured and paid separately under respective item.

S&F, Box type steel windows with side hung shutters (double shutters for glass and guaze) jointed together with an including grills using 12mm square bars @10 cm C/C as per TD No CEBZ/TD/14/2011 including box type hinges with steel handle and steel peg stay complete with glazing bars devetailed and welded complete all as specified and as directed. Note : Glass/guage shall be measured and paid separately under respective item.

M&L Sheet glass ordinary quality and glazing with oil putty in square but exc. 0.5 sqm in each pane 3 mm thick complete all as specified and directed.

S&F Aluminium anodised barrel tower bolt of 200mm of extruded section complete all as specified and directed.

S&F Aluminium anodised barrel tower bolt of 150mm of extruded section complete all as specified and directed.

S&F Aluminium alloy anodised sliding door bolt of 250mm with haps, staple ( bolt type ) & fixing clips of sheet etc complete all as specified and directed.

S&F MS butt hinges of midium weight cold rolled 100mm sizecomplete all as specified and directed.

S&F Alluminium butt hinges of 100mm size type C-22 complete all as specified and directed.

S&F Extruded aluminium alloy handle of 125mm size cast type, anodised complete all as specified and directed.

S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass 12 cm wide with CP bracket guard and railing 60 cm long complete all as specified and directed.

S&F Soap dish of PVC fixed with pvc rawal plugs and screw complete all as specified and directed.

S &F Toilet paper holder CP fixed with pvc plugs and screw complete all as specified and directed.

S &F Tabular towel rail 20mm dia D type 60 cm long between flange Brass CP complete all as specified and directed.

S & F Peg set of six Brass CP fixed to wall with PVC plugs and screw complete all as specified and directed.

S & F Curtain rail MS decorative type 25 mm dia including curtain rings complete as in repaircomplete all as specified and directed.

S & F Bracket for Dropy Rod of decorative type of colour of PVC complete all as specified and directed.

M & L providing precast cement concrete louvres and jallies, 25mm thick (measured solid) Type B0 (1:2:4 12.5mm graded aggregate set in CM 1:6, including all mould- ings but excluding frame complete all as specified and directed.

M&L providing precast cement concrete Type C1 (1:3:6) using 20 mm graded aggregate) in win- dow or door cills,lintels,bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, Watherings, throat- ing etc. and setting in cement mortar(1:4) with joints to match complete all as specified and directed.

M&L Granite (of any type) work 18-20mm thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platform sand like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.® complete all as specified and directed.

M&L for cutting out cracks to V section in existing walls, roffing or trace, cleaning out wetting grouting with cement and sand slurry 1:3 complete all as specified and directed.

S&F floor door stoper of brass body and tounge with hard drawn steel spring fixed in flooors in repair complete all as specified and directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass 12 cm wide with CP bracket guard and railing 60 cm long complete all as specified and directed.

S&F Soap dish of PVC fixed with PVC royal plugs and screw complete all as specified and directed.

M&L machine pressed precast concrete interlocking paver block any shape and size confirming to 80mm thickness M-40 grade fitted with gray cement and pigment over 30mm sand cushion complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not other wise provided for complete all as specified and directed.

S &F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe-410-W(Gde-E-250) quality-B including cutting welding nut bolt etc complete all as specified and directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long and dimeter of neck 5 to 10mm compelete all specified and directed.

S&F MS hand rails, half round or other back section or core for wooden hand rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters nosing to steps incl embding in concrete and screwing etc, wind ties for roof incl securing bolts, posts and struts in fencing incl cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets (fur securing wiemesh etc) incl all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F Prepainted galvalume aluminum zinc coating GI bassed Ridge/Gutter as shape required as per profile of Roof sheet made of Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpas in Roof covering fixed with self Tapping screw complete.

M&L a coat of white wash including preparation of old wall surfaces complete all as specified and directed.

M&L a one coat of synthetic enamel paint including preparation over old steel surfaces n.exc 10 cm width or girth complete all as specified and directed.

M&L two coat of synthetic enamel paint over coat of Red oxide primer including preparation of new steel surfaces complete all as specified and directed.

M&L PCC type B1 1:2:4 (using 20mm graded stone aggregate) in window or door cills, lintels, bressumers, steps, uon blocks(for use with masonry) string courses, copings, kneelers, apex stones, pier caps. columns, posts, boundary pillars, bed plates, pintle block,ancho-rage and for misc work setting in cement mortar (1:4) complete all as specified and directed.

Taking down carefully existing aluminum / copper point wiring (light, fan, socket or power point) complete of any description including fitting such as switches, ceiling roses, pendants, tube light fitting, ceiling fan with regulators, sockets, wooden boards, laminated sheets from sunken boxes, boards, shades light fitting etc and making good the disturbed surfaces of walls, floors, ceiling etc to match with existing surfaces complete all as specified and directed.

Taking down ceiling fan of any sweep,removing blades, cleaning the fan completely of dust and dirt and Re-hanging the same back to its original positions including connecting with three core flexible copper wire to ceiling rose etc after the completion of the point wiring including replacement of old unserviceable fan hook rubber pad, nut bolts and washers etc, complete all as specified and as directed by Engr-in-charge.

Taking down submain wiring of any size any type and in any position metalic/non metallic PVC conduit of wooden batten complete all as specified and directed.

Taking down unserviceable Sheet metal box & MCB DB SPN with MCB's of any make/capacity, complete, all as specified and directed by Engr-In-Charge.

Taking down unserviceable TPN DB with MCB's of any make/capacity, complete, all as specified and directed by Engr-In-Charge.

M&L, concealed point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH confirming to IS 694:2010 having multi stranded copper conductor of 1.5 Sqmm nominal cross sectional area (ISI marked with valid CML No) drawn in and including concealed non metallic rigid PVC conduit medium grade( ISI marked with valid CML No) not less than 20 mm dia confirming to IS 14930 (Part-I) 2001, with all fitting and fixing accessories and 1.5 Sqmm FRLSH PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to common earth dolly by providing suitable lugs with & including pressed steel sunken terminal boxes factory made for mounting switch, regulators etc with and including 2.8 mm thick plastic laminated sheet cover (white) ISI marked, fixed with brass screws and cup washers duly painted with two coats of anti corrosive paint/black bituminous paint outside and two coats of aluminium paint inside for mounting switches. sockets etc complete for the following:-

One light point controlled by one switch.

One Ceiling fan point controlled by one switch.

One Exhaust fan point controlled by one switch.

One 5 pin multipurpose socket out let 5/6 Amps on the same board with other switch.

One 3 pin/5 pin switch socket outlet, 5 Amps on independent board.

All as per item No 108 here in before but point wiring with 2.5 sqmm FRLSH H confirming to IS 694:2010, multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 2.5 sqmm FRLSH PVC insulated multi strand copper conductor cable as continous earth wire.

S&F switch piano, flush button single pole one way 5 Amp complete all as specified and directed.

S&F socket out let, multipurpose, 2 in 1 5 pin, 5 Amp complete all as specified and directed.

S&F switch piano, flush button single pole one way 15 Amp complete all as specified and directed.

S&F socket out let multipurpose flush type, 2 in 1 6 Pin 5/15 amps complete all as specified and directed.

S&F ceiling rose surface bakelite 63.5 mm dia three terminal complete all as specified and directed.

S&F electronic step rotary type fan regulator of two module capacity 80 to 100 Watt, 240 volts, AC 50Hz complete all as specified and directed.

S&F Lamp holder with metal ring, PVC/Polycarbonate type with back plate suitable for batten fittings non ISI Marked complete.

S&F LED Lamp 09/10 watt complete.

S&F Decorative ultra slim LED Tubelight fitting of LED with extruded polycarbonate, enviormental friendly energy efficient ready to use, 20 watt, 6500K fitting, incluing reqd length of not less than 1.0 Sqmm PVC multistranded BIS marked 03/02 core copper conductor for electrical connection from ceiling rose to connector of LED fitting including testing on completion all as specified and directed.

S & F security light fittings better optics for uniform distribution IP 65 protection LED of 30 watt, Heat resistance glass, pressure die cast aluminium housing including 25mm dia galvanised iron pipe light grade bracket bent to shape over all length 0.60mtr fixed to wall with 02 Nos FI clamps made of 40 x 5 mm FI, 15 cm long, 8 mm dia bolts and nuts with washers grouted in wall complete including reqd length of 1.5 Sqmm PVC multistranded BIS marked, 03 core copper conductor for connection from ceiling rose to light fittings incl testing on completion all as specified and directed.

Supply & fix BEE 5 star rating energy efficient ceiling fans 1400 mm sweep with minimum air delivery 210 cum/min, down rod all accessories required including regd length of 3 core 1.0 sqmm PVC multistranded copper conductor, PVC connector for proper hanging of fan and testing complete all as specified and directed.

Supply & fix Exhaust fans 450 mm sweep with double bearing incl all fixing accessories required including making hole & regd length of 3 core 1.0 sqmm PVC multistranded copper conductor, and testing complete all as specified and directed.

Supply & fixing water heater storage type metallic outer body and stainless steel inner container, 50 Ltrs capacity, electric suitable for single phase, 50 Hz, AC Supply, 5 star rating, including all necessary fittings and fixture with minimum 1M of three core 2.5 sqmm twisted copper conductor cable PVC sheated, three pin plug top complete with necessary fittings and fixtures all as specified and directed.

M&L, sub main wiring with two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 6 sqmm size drawn in and including non metallic rigid PVC concealed conduit medium grade (ISI marked with valid CML No) not less than 25 mm dia confirming to IS 14930 (Part-I) 2001, with all fitting & fixing accessories including one run single core PVC insulated unsheathed 6 Sqmm FRLSH copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed. NOTE: (i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty to match with the existing surface.

S&F sheet metal enclosure double door for distribution board factory made for MCB DB load link VTPN 4 way suitable for MCCB as incomer, 100 Amp,4 pole & Including MCCB 100 amps 4 pole 16 KA complete. (when MCB's are to be used) with suitable size of busbar complete,fixed flush in wall including chases wall for fixing DB and making good the distributed wall surfaces to match with existing specification including taking down all as directed by Engr-in-Charge at site.

S&F MCB DB, sheet metal enclosures double door SPN 8 way with bus bar 240 volts 2 in 1 shutter type (METAL DOOR) type with blanking plates where required and IP 43 degree protection complete all as specified and directed.

S&F sheet metal enclosure, single pole and neutral with a two pin and earth plug and socket with and including one single pole MCB 20. Amps, 240 volts,10 KA complete all as specified and directed.

S&F, MCB SPN 63 Amps, 240 volts 'C' series 16 KA ,including connection with suitable size copper lugs complete all as specified and directed.

S&F, MCB SP 240 volts, 63 Amps, 'C' series 10 KA including connection with suitable size copper lugs. complete all as specified and directed.

S&F, MCB SP 240 volts, 6 to 40 Amps, 'C' series 10 KA including connection with suitable size copper lugs. complete all as specified and directed.

Supplying, laying, testing and commissioning of XLPE insulated screened PVC bedded galvanised steel strip or wire armured electric power cable (Heavy duty ) with aluminium conductor 1100 volts grade, cross sectional area 50 Sqmm 3.5 Core.

Excavation in trenches n exc. 1.5 m wide and n' exc. 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

Returning, filling of excavated soil, including spreading leveling, watering and well ramming in layers, not exceeding 25cm complete all as specified and directed.

Removing of surplus soil to a distance n exc 50 m and depositing where directed at a level n exc 1.5m above the starting point complete.

Sand filling in trenches with clean dry unwashed sand free from sharp particles, gently punning around the cables complete.

Bricks, old size sub class `B' laid in trenches with width wise along the alignment of the cable as protection complete.

S&F tube 'Light' grade galvanised Pipe of 50 mm dia with all fitting for cable protection, laid in trenches, fixed to wall and floor by MS shaddle & fixed with pole, 02 position by MS clamp made of 40x5 mm MS flat, complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) vertically, with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of MES Schedule Part-I connecting to earthing test. Testing on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board etc with & including adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded BT stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, internal surface of concrete shall be given 10mm thick plaster in CM 1:4, pre cast RCC (1:2:4) type B-1 (using 20mm graded BT stone aggregate) 40mm thick cover, reinforced with 8mm dia deformed or TMT bars 3 Nos both way with 12 mm dia round bar handle, GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 15mm dia GI medium grade earth lead protection pipe including provn of earth test point made of 50 x 5 mm MS Flat in 'D' shape 500 mm legth grouted in wall complete 01 x 6 mm multistrand PVC insulated copper conductor ( Green Colour) to be provided from test point to DB through 20 mm dia concealed non metallic conduit complete all as specified and directed.

S&F tube Medium' grade galvanised with all fitting laid in trenches, of 50 mm dia complete all as specified and directed.

S&F tube Medium' grade galvanised with all fitting laid in trenches, of 25 mm dia complete all as specified and directed.

S&F tube Medium' grade galvanised with all fitting fixed to wall/floor, of 20 mm dia complete all as specified and directed.

S&F gun metal gate valves with iron wheel head screwed at both ends for iron pipes of 50 mm dia complete all as directed.

S&F gun metal gate valves with iron wheel head screwed at both ends for iron pipes of 20 mm dia complete all as directed.

M&L for Construction of valve chambers of size 1.0x 1.0x 1.0 internal dimensions with 150 mm thick PCC foundation 1:4:8 type D2 using 40 mm graded trap stone aggregate, 230 mm thick brick masonary wall with sub class 'B' bricks builts in cement mortar 1:4 10 mm thick plastering to brick masonary in cement mortar internally and externally upto 15 cm below ground level, 50 mm thick coping with PCC 1:2:4 type B1 using 20 mm graded crushed trap stone aggregate valve chamber frame cover made of mild steel angles of size 40mm x 40mm x 6mm and cover made of 2.5 mm thick mild steel sheet fixed with mild steel hinges - 02 Nos, locking arrangements with provision of locks and painting the steel surfaces with two coats of synthetic enameled paint over a coat of zinc chromate primer including neccessary earth work, excavation, all as specified and directed by Engineer-in-Charge of size 1.0 x1.0 x1.0 internal dimentions.

Cutting of existing Cast iron pipes in position for insertion of new tees, for branch connection of 50 mm dia from bore of pipe 150 mm dia complete.

S&F 5 electric water heater sotrage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV, connection pipes etc.

S&F single pole and neutral encloseure with a two pin and earth plug and socket complete with one single pole MCB-20A

S&F CPVC pipe 16 mm dia with all fittings & fixtures on surface of walls floors etc incl cutting and incertion of `T' in existing pipe line of appropriate size all as directed by EIC.

S&F PVC connection pipe (suitable to Hot water) of 15 mm dia 450 mm long with brass flexible tube alongwith CP Hexagonal nuts adopter rubebr washer.

S&F CP stop cock of size 15 mm bore dia.

S&F CP cast copper alloy with crutch handle screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified for cold water connection.

All as per item No 150 but for hot water connection.

M&L for sub main wiring with 4 sqmm copper conductor (multistranded), FRLSH single core PVC insulated unsheatehed, 1100 volt grade cable confirming to IS-694 (ISI marked with valid CML No ) drawn in & icluding PVC surface conduit medium grade with all accessories and terminated in PVC moulded box, duly earthed with 2.5 Sqmm copper conductor cable in greenn colour for earth continuity conductor to earth dolly complete as specified and directed by Enginerr in Charge.

M/S MUKESH AGARWAL

M/S ISLAM AND BROTHERS