REPAIR/RESURFACING OF BLACK TOP ROAD AND OTHER CONNECTED WORK IN SOUTH AREA AT NASIRABAD AND UNDER AGE B/R-I AT NASIRABAD AND AJMER MIL STN UNDER GE NASIRABAD

Amount

M&L for scarifying or picking graveled, macadam or bituminous macadam surfaces area not exc 400 sqm and exc 50mm and n nexc 100 mm deep, complete all as specified and directed

M&L for scarifying or picking graveled, macadam or bituminous macadam surfaces area exc 400 sqm and n. exc 50mm deep, complete all as specified and directed

M&L, 75 mm thick (compacted thickness ) WBM in one layer with coarse agg of grading broken metal of lime stone and sand stone of grading 2 (63mm to 40mm size) spread, rolled with 8 to 12 tonne roller and consolidated to required gradient and camber complete all as specified and directed.

M & L for preparing surfaces by brushing with wire brushes for removing caked mud etc, swe-eping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc, Unsurfaced Water bound macadam, complete all as specified and as directed by the Engineer-in-Charge.

M&L for applying evenly a primer / tack coat with bituminous primer vg-10 at 10 kg per 10 Sqm, using hot type bitumenous primer complete all as specified and as directed.

M&L for preparing old surface by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bages to remove all loose dirt etc, black top surfaces complete all as spd and directed.

M&L for applying evenly a primer / tack coat with bituminous primer VG-10 at 5 kg per 10 Sqm, using hot type bitumenous primer complete all as specified and directed.

Repair to potholes any depth, not exc 1.00 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc, cutting around edges to at least 25mm in depth, making good by filling in screened & graded road metal , watering and well ramming (including supply of road metal) complete all as specified and directed.

M&L for providing bitumen premix semi dense asphatic concrete 30 mm consolidated thickness with 5.50% binder (paving bitumen VG-30) by weight of total mix, mixed in computrized hot mix plant, laid, rolled and compacted to required gradient and camber with the help of mechanical paver and power roller 8 to 12 ton capacity complete all as specified and directed.

M&L for premix bituminous macadam (consolidated thickness 75 mm or less) with crushed and graded stone aggregate mixed together with VG-30 graded paving bitumen (4% by weight of total mix) to meet the disired requirement as mentioned in Particular Specification, mixing bitummnious concrete in computerized hot mixing plant, laying and spreading uniformly by means of mechanical paver and rolled and compacted to required gradient and camber by 8 to 12 tonne vibratory road roller complete all as specified and directed.

M&L for 2.5 mm thick hot applied thermoplastic paint of approved quality including reflectising glass beads @250 gms per Sqm area,thickness of 2.5 mm inclusive of glass beads method of execution as per SSR. finished surface to be level and uniform complete all as specified and directed.

Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed echargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. complete all as specified and directed.

S&F in for stud (Cat Eye) ABS body conforming to IRC 67-1977 giving reflection on both sides including fixing with epoxy complete all as specified and directed.

Providing and laying at or near ground level factory made kerb stone (100mm thick) of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required and necessary excavation required & removal of spoil to a distance exc 50 m complete all as specified and as directed.

S&F in repair 50-80 mm thick lime or sand stone kerb of roughly rectangular stones not less than of size-length 600 mm and height 300 mm, dressed so that the maximum depression from a straight edge held against the dressed surface shall not exceed 6 mm for top and exposed surfaces of sides and 20 mm for the rest of surfaces jointed in cement mortar 1:6 and struck flush complete all as specified and as directed.

Dismantling of stone edging, concrete edging, kerb stone and including removing at site complete all as specified and directed

M & L for moorum /red bajri filling in paving ,laid in layers not exc 15 cm thick, spread, levelled and rammed to form uniform and Consolidated surfaces with and including watering to required gradient and camber with 0.20 to 0.50 tonne hand operated roller complete all as specified and directed.

Demolition of cement concrete (unreinforeced) in ground floors and pavings n. exc 15cm thickness (below or above ground level) complete all as specified and directed.

M&L for PCC 1::3:6 type C2 using (40mm graded stone aggregate)as in foundation filling and mass concree complete all as specified and directed.

M&L for 1.65 mm thick and 50mm bore (outer dia 60.3mm) stainless steel pipe of grade SS-304 of schedule 5S sign board complete all as specified and directed.

S&F in repair informatory sign board in reqd size and each sign board made of two 4mm thick aluminium composite panel (ACP) both side face to fully covered with 3mm scotchlite brand high intersity prismatic grade retro-reflective sheet shall be ASTM D 4956 Type IV in required colour. The retro-reflective sheet shall be processed on ACP by 3m equipment heat lamp vacum applicator ant letter, signs and symbol shall be cut by computrised plotter or digital printed on retro-reflective sheet with high quality eco-solvent digital Roland and fabricated out of high intensity prismatic grade sheeting with text matter (as reqd) and border of same sheeting, signboard shall be supplied alongwith supported circular hollow stainless steel section frame of size 25mmx25mmx1.29 mm thick alongwith proper clamping with same section of stainless steel and nut bolts/welding complete all as specified and directed.

M&L for for preparation of old surfaces of kerb stone and applying two coats of synthetic enamel paint of different colour for neat and smooth finishing complete all as specified and as directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment coloured, reflective type of approved quality laid over & Including 25mm thick sand cusion vibrated with mechanical vibrator complete all as specified and directed.

M/s Himgiri construction (BID ID -3464673)

RIGMATWALAINFRAPROJECTS (BID ID -3461229)

M/S SHIVA TRADERS (BID ID -3465061)