Beautification of bund road, accesses, Parks, Illumination, Public Amenities, Social Spaces and Ghats

Amount

Clearing grass and removal of the rubbish upto a distance of m outside the periphery of the area cleared and removal of garbage, poles, trees, stones and other unwanted material by manual means

Supply of Mazdoors for Carriage of materials (Grass) from removing site to road site of work by manual labour through a lead of 200 mtrs.

Carriage of material (grass) from road site to dumping site achan by mechanical transport through a lead of 7 Km including loading, unloading and stacking.

Engagement of boat (Medium size) including boat man (For perzoo island)

Supply of office tables fully laminated size ( 2 x4 feet)

Supply of Executive Chair Hydraulic back push (superior)

Supply of Office Chair Superiors (Wooden)

Supply of office chair Standard (Wooden)

Providing and fixing/installation of 1 tonn capacity hot and cold Air Conditioner (Diokan, IFB or Loyord) Standard make with voltage Stabilizer Wall mount complete job

Providing and fixing notice boad of standard size

Providing and fixing of wooden laminated doors 2 mt x 0.90

Providing electrification internal and external by way of heating lighting wiring LED Lights 12 watt, Exaust Fans and charging points including service line etc. (7/16) etc.

Providing and fixing sanitary/water supply to the bathroom and pantry including water tank 500 litters (triple layer) 1 Hp electric Motor (complete make) and other pipe fittings as required (PPR fittings).

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Providing curtains for doors and windows with cotton lining

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in charge 1:3:6 or richer mix (i/c equivalent design mix)

Carriage of dismantled material (concrete) by mechanical transport from site of work to disposal site through a lead of 03 kms including loading, unloading and stacking.

Dismantling steel work manually/by mechanical means in built up sections without dismembering and stacking within 50 meters lead as per direction of Engineer-in-charge

Carriage of dismantled material (steel) from actual site an avg lead of 03 kms

Carriage of dismantled material (concrete) by mechanical transport from site of work to disposal site through a lead of 1.5 kms including loading, unloading and stacking.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead for thickness of tiles above 25 mm and upto 40 mm

Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50-meter lead as per direction of Engineer-in-Charge

Carriage of serviceable paver block from site to divisional store avg. lead of 3 km by mechanical transport

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead For thickness of tiles above 25 mm and upto 40 mm.

Dismantling manually/ mechanically including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: Bituminous road.

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All Kinds of Soil ( total quantity 4445.50)

50% qty by manual means

50 % qty by Mechanical means

Supply of stone soiling

Dumping stone excluding cost of stones. in Horizontal on level

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size)

Providing and laying mat finished vitrified tile of specified size having water absorption less than 0.5% and conforming to IS 15622 of approved make in all colors and shades in outdoor floors such as footpath, courtyard and multi models etc. laid on 20 mm thich base of cement mortar 1:4 in all shapes and pattern including grouting. The joints with white cement mixed with matching pigments etc 450mm x 450 mm (16 mm thick) complete as direction of site incharge

Providing and laying Devri stone tiles of 25mm thickness laid on 20mm thick cement mortar 1:4 mix in all shapes and patterns including grouting the joints with white cement mixed with matching pigments etc complete asper direction of Site Engineer

Carriage of materials (Building rubbish) from dismantling site to road site of work by manual labour through a lead of 50 mtrs and Carriage by mechanical transport from road site of work to disposal site through a lead of 02kms including loading, unloading and stacking.

Carriage of materials (Earth) from Excavation site to road site of work by manual labour through a lead of 50 mtrs and Carriage by mechanical transport from road site of work to disposal site through a lead of 02kms including loading, unloading and stacking.

Carriage of material (Earth) from Excavation site to disposal site by mechanical transport through a lead of 02kms including loading, unloading and stacking.

Centring and shuttering including strutting propping etc and removal of form work for:- Foundations, footings, bases for columns

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed All kinds of soil 1 meter from cutting edge

Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with Cement mortar 1:6 (1 Cement : 6 coarse sand) Quarry

Cantering and shuttering including strutting propping etc. with ordinaryu timber & removal of form work for slab soffits.

Dry random rubble masonry with hard stone in foundation and plinth] with bond stone quarry

Brick work with FPS bricks of class designated 75 in foundation and plinth in 1:6

Extra for brick work with common burnt clay bricks in super structure ablove plionth upto floor 5 level.

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level/ above plinth(TMT Bars)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately)Second class kail wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately Second kail wood 35 mm thick

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40mm thick. Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II IS : 12823 marked

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge Second class Kail wood 30 mm thick

Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc. complete First class Budloo/Fir wood

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position Budloo / Fir wood

Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required

Providing and fixing precoated galvanised steel sheet roofing accessories0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete Ridges plain (500 - 600mm)

12mm Cement plaster of mix 1 : 6 ( 1 cement : 6 fine sand)

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete 50 mm thick with 20mm nominal size stone aggregate.

Providing & Fixing plained eaves boarding.Second class Kail wood 300 x 40 mm (nominal size.

Providing & Fixing MS grills of required pattern in frames of windows etc with M.S Flats square or round bars etc including primimg coat with approved steel primer all complete .Fixed to openings / wooden frameds with rawl plughs screwa etc.of Mild Steel Ornamental Grill for Windows.

Providing and fixing plain lining tongued and grooved, including wooden plugs complete with necessary screws and priming coat on unexposed surface 12mm thick (Budloo Wood)

Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including Size of tile 600x600 mm

Stone work (machine cut edges) for wall lining upto 10 m height, backing filled with a grout of 12 mm thick cement mortar 1:3 (1 Cement : 3 coarse sand) and jointed with Cement mortar 1:2 (1 cement : 2 stone dust), Buj Tiles

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete In colour such as White, Ivory, Grey, Fume Red Brown

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete

Applying Primer coat with ready mixed on wood Including painting of approved brand in two or more coats on new wood work

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: Range of two urinal basins with 5 liter white P.V.C automatic flushing cistern.

Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 15 mm dia. nominal bore

Providing and fixing PVC fittings of approved brand and manufacture

Floor trap

P.V.C.4” dia plain bend

P.V.C.3” dia plain bend

P.V.C.4” dia Pipe

P.V.C.3” dia pipe

P.V.C.2” dia pipe

P.V.C.2” S or P

Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-incharge.

Providing and fxixng of C.P.Bends

Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.

P/F of Hardware items for doors , windows, glass panes , beeding , collapsable shutter , bench paper holder etc photograph and board complete job.

Supplying of following machinery, equipment of standard make and manufacture

Bush cutters 4 stroke

Electric lawn mover 1600 wt to 2000 wt

Lawn movers petrol driven heavy duty

Lawn movers manual ISI marked

Supply of tools and implements of standard make and manufacture

Hedge shear

Pruning scissors,seatures

Purnning saw

Power chain

Manual

Shovels

Garden rake

Sickles

Garden Hoes

Power drive

Manual

Pick Axes

Aluminium Ladders

A. Foldable

B. Unfoldable

C. Khurpa

Centering and shuttering including strutting propping etc and removal of form work for:- Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) Upto plinth level.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m

Earth work in rough excavation, banking excavated earth in layers not exceeding 20 cm in depth, breaking clods, watering, rolling each layer with 1/2 tonne roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, lead upto 50 m and lift upto 1.5 m in all kinds of soil

Providing of plastic pipes for weep holes of 3" dia

Extra for levelling & neatly dressing of disposed soil completely as directed by Engineer-in-charge.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Providing wood work in posts horizontal and vertical members (ornamental) ist class deoder wood Vertical pillars (carving pillars)

Extra for circular works

Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc. complete First class Budloo/Fir wood

Providing and fixing plained eaves boarding. 2nd class Deodar wood 250x32 mm (nominal size)

Providing and fixing of Khatambai ceiling of Ist class budloo (Chaar Gul) including fixing/ply work/beading/frame work compete

Providing and fixing plain jaffri of 35x10 mm laths placed 35 mm apart (frames to be paid separately) including fixing 50x12 mm beading complete with : First class deodar wood.

Providing and fixing precoated galvanized iron high profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Polishing on wood work with ready mixed Wax polish of approved band and manufacture on New work.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. 5.0 mm thick glass pane (weighing not less than 12.50 kg/sqm)

Providing Seats/ seating arrangements. (Complete Job).

Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge In cement mortar

Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar

Demolishing cement concrete manually/by mechnical means including disposal of material within 50 meters lead as per directin of Engineer in charge 1:4:8 or leaner mix

Stone work in super structure upto floor five level in cement mortar 1:6 ( 1 cement :6 coarse sand) including pointing with cement mortar 1:2 ( 1 white cement: 2 stone dust) with an admixture of pigment matching the stone shade and curing complete: In Plain Ashlar White sand stone

Pointing on stone work with cement mortar 1 : 3 (1 cement : 3 fine sand) Flush/Ruled Pointin

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required 10.25.1 In stringers, treads, landings etc. stair cases, including use of chequered plate wherever required, all complete job

painting on GS with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade on new work including a coat of approved steel primer but excluding cost of mordant solution

Applying a coat of mordant solution on G.S. sheets With a solution of 38gms of copper acetate in liter of soft water

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

20mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand)

stone work in super structure upto floor five level in cement mortar 1:6 ( 1 cement :6 coarse sand) including pointing with cement mortar 1:2 ( 1 white cement: 2 stone dust) with an admixture of pigment matching the stone shade and curing complete: (In Plain Ashlar ordinaray) one face punched White sand stone

Stone work in super structure upto floor five level in cement mortar 1:6 ( 1 cement :6 coarse sand) including pointing with cement mortar 1:2 ( 1 white cement: 2 stone dust) with an admixture of pigment matching the stone shade and curing complete: In Plain Ashlar) White sand stone (Both face punched)

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Riveted and bolted.

Providing and fixing of MS ornamental cap

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. 13.70.1 Two or more coats on new work

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.

Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)

Finishing walls with water proofing cement paint of required shade: 13.117.1 Old work (one or more coats applied @ 2.20 kg/10sqm) over priming coat of primer applied @ 0.80 liters/10sqm complete including cost of priming coat.

Finishing walls with textured exterior paint of required shade on New work (two or more coats applied @ 3.28 liter/10sqm) over and including base coat of exterior primer applied @ 2.20kg/10sqm

Supply of Mazdoors for Mopping walls including removal of dirt algae,lose pilaster,mud etc by means of manual .

Making graffiti at places on existing walls.

Close timbering over areas including strutting, shoring and packing cavities (wherever required) etc. complete. (Measurements to be taken of the face area timbered) Depth exceeding 1.5 m but not exceeding 3 m

Extra rates for quantities of works executed In or under water and/ or liquid mud, including pumping out water as required

Extra for laying concrete in or underwater and/or liquid mud including cost of pumping or bailing out water and removing slush etc. complete Note :- The quantity will be calculated by multiplying the depth measured from the sub-soil water level up to centre of gravity of concrete under subsoil water level with quantity of concrete in cum executed under sub-soil water. The depth of centre of gravity shall be reckoned correct to 0.1m, 0.05m or more shall be taken as 0.1m and less than 0.05m ignored

Dry stone pitching (any thickness) excluding cost of stones on slopes

Supply of stone boulder Quarry nominal size 225 mm)

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge In cement mortar

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-incharge. 16.25.1 Made of G.I. wire of dia 4 m

Applying priming coat with ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel galvanized iron/steel works

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. 13.70.1 Two or more coats on new work

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats on old work

Providing lighting arrangements for vertical posts of fence including cabling and oither fixtures complete job.

Removing mortar from and cleaning stones and concrete articles (net quantity of stacks of cleaned materials will be measured in cement motar

Excavation in dumped stones or malba including stacking of serviceable and unserviceable material separately and disposal of unserviceable material lead upto 50 m and lift upto 1.5 m, disposed material to be neatly dresse

Carriage of material ( cement concrete debris/building rubbish by mechanical transport from site to disposal site through a lead of 10 Km. including loading, unloading and stacking.

Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge.

Extra for cutting reinforcement bars manually/by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional areas of R.C.C. or R.B. work) as per direction of Engineer-in-charge

Extra for scrapping, cleaning and straightening reinforcement from R.C.C. or R.B. work

Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m. (stacks of cleaned bricks shall be measured)From brick work in cement morta

Extra carriage of Rubbish /concrete etc material by manual labour through a lead of 100mts including loading, unloading and stacking .

Providing and laying factory made Precast concrete solid cylindrical blocks of 300mm dia of grade M-30 from approved manufacturer in foundation and plinth

Providing and laying factory made Precast concrete solid cylindrical blocks of 150mm dia of grade M-30 from approved manufacturer in foundation and plinth

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Providing and laying Anchor Bolts 25 mm (600 mm long)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): First class deodar wood

Providing and fixing 20mm thick wooden planks ceiling (frame work for base to be paid for separately) with M.S. screws Budloo/fir wood

Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing wooden moulded corner beading of size 50x50 mm (base and height) of triangular shape to the junction of paneling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete Second class Kail wood

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Providing and fixing of 6 mm thick Nodic Pine with all fasting and fistures ( complete job )

Providing and fixing of Mehrab Moulding of Deodar wood of required size and specification.

Crafts Mashif of wood carrving

Providing and fixing of Electric fittings

Light points

Indicators

Fan point with dimmer

Ceiling fan point

Heating points

Service cable 7:16 copper

LED Lights 12 watt conceal

Distribution boxex 6 way

DP 63 amp

Circuit Wiring

Circuit Conductors

Providing and fixing ridges and hips in fibre cement reinforced by organic fibres and/or inorganic synthetic fibres roofing with suitable fixing accessories or self drilling fastener and EPDM washer etc. complet

12mm Cement plaster of mix 1 : 4 ( 1 cement : 4 fine sand

Providing and fixing od Deodar wood Ornamental planks

Providing and fixing of panjra work (Wooden)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) Second class deodar wood

Providing and fixing of storage cabinet ( Budloo wood )

Providing and fixing of 3.5 mm thick glass panes

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge First Class deodar wood

Polishing on wood work with ready mixed Wax polish of approved band and manufacture on New work.

Providing and fixing of door 35 mm thick

Providing and fixing of ornamental post 3'x4'.

Providing and fixing hard ware items (Brass)

Tower bolt 4"

Handle 5"

Handle 6"

Aldrop 12"

Hings 6"

Providing and fixing of 6 mm plywood under Nodicpine

Painting of Evas Boardings

Providing and laying non pressure NP2 class (light dury) RCC pipes with collars, jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement 2 fine sand) including testing of joints etc complete 300mm dia.

Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete

Providing and fixing of five door cabinet

Providing and fixing of PLB pipe

Providing and Fixing OF 12 Fibre

Providing and fixing of DPS 10 foot height

Place identification sign Boards. Supply and fixing of Retro reflective single supported made out of Rectangular and round type_XI micro prismatic type sheeting conforming to IRC:67:2012 & ASTM D 4956-09 covered with Electro Cuttable translucent film as per the drawing and display matter given by the engineer in charge,fixed over 4mm thick aluminium composite panels and riveted using 6mm aluminium rivets to back support frame of MS 50x50x4mm all round supported on a tubular double supported structure of 80NB pipe with 8mm wall thickness as per the drawings attached.the MS tubular pole shall be painted with epoxy and minimum two coats of synthetic enamel paint .The posts shall be firmly fixed to the ground by means of properly designed foundation(as per the drawings)with M25 grade cement concrete. Installation work shall be as per relevant clause of MORTH Specifications section 800&IRC:67:2012 complete in all respects. The rates shall include cost of design fabrication, supply, transportation local shifting erection of sinage structure using crane.All T&P machine, material and labour required for proper completion of works as per the direction of Engineer in Charge.

Opposite Sgr. Club Zero bridge to Abdullah bridge (Area 1176 sq.mts)

Turfing with dhoob grass.

Beautification of area around existing 05 Chinar trees by way of boulder pitching and filling with garden sweet soil.(One job)

Provision of ornamental flowering bush plants/trees/annuals/climbers etc. for beautification.

Hosta Lillies

Hydrengia (2 feet)

Abelia Grandiflora (18 inch)

English Ivy (Hedra Helix)

Turfing with dhoob grass. (30% area)

GPO Park/ Jehlum view park (Area 1969 sq.mts).Provision of ornamental flowering bush plants/trees/annuals/climbers etc. for beautification.

Campsis Redicans (Begonia creeper) 2 feet

Keria japonica (18 inch)

Bunksia Rose (2 feet)

Rose Creeper (18 inch)

Golden Thuja (2-3 feet)

Abelia Grandiflora (18 inch)

Standard Ros (Budded) 3 feet

HT Roses (12 inch, 2-3 branches)

Lagerstromia (3 feet)

Mapple Green (3 feet)

Magnolia solangena (3 feet)

Magnolia lilliflora (3 feet)

Magnolia setalleta (3 feet)

Microphylla (10 inch bushy)

Hybrid Annuals

Gazebo Park (Area 4042 Sqm)

Turfing with dhoob grass (80% area)

Up-gradation of park by way of leveling and spreading 3" of sand soil mixture (1:1) Provision of ornamental flowering bush plants/trees/annuals/climbers etc. for beautification.

HT Roses for 02 rosaries (12 inch, 2-3 branches)

Standard Roses (Budded 3 feet)

Golden Thuja (2-3 feet)

CampsisRedicans/Begonia Creeper (2 feet)

Keria Japonica (18 inch)

Bunksia Rose

Rose Creeper (18 inch)

Jesminium

Ivy (Hedra Helix)

Thia cypress (2-3 feet bushy)

Wegellia (2-3 feet)

Mohonia

Hydrengia (2 feet)

Nandina (18 inch)

Spirea venhotti (2 feet)

Chenomalis (Japanese Quience)

Berberis (2 feet)

Hypericum (2 feet bushy)

Eunymous Fortunea (1 feet)

Microphylla (1 inch)

Bilal Masjid Park (Area 2264 Sqm) Provision of ornamental flowering bush plants/trees/ annuals/ climbers etc. for beautification

Standard Roses (Budded) 3 feet

Golden Thuja (2-3 feet)

Spirea prunifolia (2 feet)

Abblia (18 inch)

Ornamental Pomegranate (18 inch)

Forcythia

Rose Creeper (18 inch)

Jesmenium

Campsis/(Begonia creeper) 2 feet

Sopohara Japonica (3 feet)

Back side of Ahdos Hotel (Proposed rose garden) Area 1237 Sqm

Turfing with dhoob grass (100% area)

Up-gradation of park by way of leveling and spreading 3" of sand soil mixture (1:1) ,Provision of ornamental flowering bush plants/ trees/annuals/climbers etc. for beautification.

HT Roses for 02 rosaries (12 inch, 2-3 branches)

Standard Roses (Budded) 3 feet

Cherry Laurel (18 inch)

CampsisRedicans/Begonia creeper (2 feet)

Forsythia

Berberis (2 feet)

Eunymousaureo variegate (1 feet)

Lonicera (18 inch)

Buxus Sempervirens (18 inch)

Opposite Altaf Bukhari's Residence (Area 837 Sqm)

Turfing with dhoob grass. (100%area)

Opposite Altaf Bukhari's Residence (Area 837 Sqm)

Ornamental Plum (5 feet)

Magnolia Solengina (3 feet)

Lonnicera (18 inch)

Buxus Semperuirens (18 inch)

Park Between Lal Mandi Footbridge to Amirakadal (including 240 RMT dead wall from Abi Guzar mandir to Amira kadal) (Total Area: 5629 sq.mts) (Green Area: 2000 sq.mts)

Turfing with dhoob grass

Provision of ornamental flowering bush plants/trees/annuals/climbers etc. for beautification.

HT Roses (12 inch, 2-3 branches)

Lavender (bushy)

Rose Merry (bushy)

Centollena (bushy)

Wisteria (2-3 feet)

Honey Suckle (2 feet)

Rose Creeper (18 inch)

Campsis/Begonia creeper (2 feet)

JuniperousChinensis (2-3 feet)

Golden thuja (2-3 feet bushy)

Thiacypress (2-3 feet bushy)

Abalia (18 inch bushy)

BuxusSempezuirens (18 inch)

Ivy Hedra Helix (Green)

Ivy Hedra Helix (Varigented)

Proposed walkway from Abdullah bridge to Amira kadal Total No. of Planters=100 Size=(6 feet*1.5 feet) Provision of ornamental plant mateiral for planters to be installed on the path way

Hydrangea

Acuba Japonica

Hosta Lillies

Calla Lilies

Cana (Red)

Cana (Green)

Abelia

Buxus

Microphylla

Eunymous Fortunea

Lonicera

Minature Rose

Azallia

Hybrid Annuals

Semi circular patch of land between Abdullah bridge to Peerzo Island near entrance of Peerzo Cannal (Area 1109 sq.mts) Provision of ornamental flowering bush plants/trees/annuals/climbers etc. for beautification.

Magnolia solangena (3 feet)

Magnolia Lilliflora (3 feet)

HT Roses (12 inch, 2-3 feet branches)

Buxus Semperuirens (18 inch)

Italian Cypress (Cupressustorulosa) 3 feet

Peerzo Park (Area 2981 Sqm)

Turfing with dhobe grass (80% area)

Ornamental flowering bush plants /trees /annuals/climbers etc. for beautification.

Magnolia Lilliflora (3 feet)

Lagerstromia (3 feet)

Ornamental Plum

Campsis Redicans (Begonia creeper) 2 feet

Eunymous Fortunea (1 feet)

Bunksia Rose (2 feet)

Forsythia

Spirea prunifolia (2 feet)

Weigellia

Childrens Park (left bank of river Jehlum) (Area 4951 sq.mts)

Turfing with dhoob grass (80% area)

Provision of ornamental flowering bush plants/trees/annuals/climbers etc. for beautification.

Abelia Grandiflora (18 inch)

Sprea Prunifolia (2 feet)

Wegalia (2-3 feet)

Guilder Rose (2 feet)

Forsythia

Golden Thuja (2-3 feet)

Standard Rose (Budded) 3 feet

Ivy(Hedra Helix)

Wisteria (2-3 feet)

Campsis Redicans (Begonia creeper) 2 feet

Hydrengia (2 feet)

Magnolia lilliflora (3 feet)

Lagerstromia (3 feet)

Ornamental Plum (5 feet)

Ornamental Cherry

HT Roses for 02 rosaries (12 inch, 2-3 branches)

Cherry Laurel (18 inch)

Convent School (Masjid Park) (Area 310 sq.mts) (Left Bank of River Jehlum)

Turfing with dhoob grass. (100% area)

Up-gradation of park by way of leveling and spreading 3" of sand soil mixture (1:1) Provision of ornamental flowering bush plants/trees/annuals/climbers etc. for beautification.

Abelia Grandiflora (18 inch)

Sprea Prunifolia (2 feet)

Wegalia (2-3 feet)

Guilder Rose (2 feet)

Forsythia

Golden Thuja (2-3 feet)

Standard Rose (Budded) 3 feet

Ivy(Hedra Helix)

Provision of ornamental flowering bush plants/trees/annuals/climbers etc. for beautification.

Spirea Rosea (2feet)

Stretch from Convent Bridge to Chief Office (4283 sq.mts) (Left Bank of River Jehlum)

Turfing (20% of Area)

Provision of ornamental flowering bush plants/trees/annuals/climbers etc. for beautification.

Abelia Grandiflora (18 inch)

Guilder Rose (2 feet)

Sophora Japonica (3 feet)

Hydrengia (2 feet)

Golden Thuja (2-3 feet)

Stretch from Chief Office to Lalmandi Foot Bridge (3287 sq.mts) (Left Bank of River Jehlum)

Turfing (20 % of Area)

Provision of ornamental flowering bush plants/trees/annuals/climbers etc. for beautification.

Lagestromia (3 feet)

Ornamental Plum (5 feet)

Magnolia lilliflora (3 feet)

Forsythia

L.D. Park (3900 sq.mts) (Left Bank of River Jehlum)

Turfing with dhoob grass (90% area)

Up-gradation of park by way of leveling and spreading 4" of sand soil mixture (1:1) Provosion of ornamental flowering bush plants/trees/annuals/climber etc for beautification

Abelia Grandiflora (18 inch)

Sprea Prunifolia (2 feet)

Wegalia (2-3 feet)

Guilder Rose (2 feet)

Chenomalis (Japanese Quience)

Golden Thuja (2-3 feet)

Standard Rose (Budded) 3 feet

Magnolia lilliflora (3 feet)

Lagerstromia (3 feet)

Ornamental Plum (5 feet)

Cherry Laurel (18 inch)

Park behind L.D. Hospital (Near Nurses Hostel) (Area: 900 sq.mts)

Turffing with dhoob grass (100% area)

Up-gradation of park by way of leveling, tractorization & Up-gradation of park by way of leveling and spreading 4" of sand soil mixture (1:1)

Sand including carriage by M.T average 12 Km from Pampore

Soil including carriage by M.T average 15 Km from Budgam.

Provision of ornamental flowering bush plants/trees/annuals/climbers etc. for beautification.

Spirea Prunifolia (2 feet)

Guilder Rose (2 feet)

Golden Thuja (2-3 feet)

Standard Rose (Budded) 3 feet

Magnolia lilliflora (3 feet)

Lagerstromia (3 feet)

Ornamental Plum (5 feet)

HT Roses (12 inch, 2-3 branches)

Microphylla (10 inch bushy)

Eunymous Fortunea (1 feet)

Buxus Sempervirens (18 inch)

Forsythia

Hypericum (2 feet bushy)

Sopohara Japonica (3 feet)

Supply, Installation, Testing and Commissioning of Ornamental moulded cast iron poles of HL cat No- 6401 HI –LITE Dwarka make / design (Cat No DLP 2-30-101) or Royal fabrication having cat no. RLP-02-03/ Karrare mujasma / Equivalent make ( subjected to approved before installation by technical committee of smart city limited ) with 15" base plate and 3mtrs height enamelled coated and 1-3 Amp single pole MCB of Legrand /L&T/Siemens/Hager, 2x 1.5 sq mm FRLS cu wire Havells , polycab make ,Spark earthing grouted in ground to be fitted with foundation block bolt (excl cost of foundation block) Standard

Supply, Installation, Testing and Commissioning of Ornamental moulded cast iron poles of HL cat No- 6401 HI –LITE Dwarka make / design (Cat No DLP 2-30-101) or Royal fabrication having cat no. RLP-02-03/ Karrare mujasma / Equivalent make ( subjected to approved before installation by technical committee of smart city limited ) with 15" base plate and 4 mtrs height enamelled coated and 1-3 Amp single pole MCB of Legrand /L&T/Siemens/Hager, 2x 1.5 sq mm FRLS cu wire Havells , polycab make ,Spark earthing grouted in ground to be fitted with foundation block bolt (excl cost of foundation block)

Supply and fixing of ornamental Cast iron Bracket painted with anti corrosive enamel paint for existing pole / Equivalent make (to be approved before installations by technical committee of smart city limited )without arrangement for fixing of lighting luminaries.

Providing and fitting of One way Bracket ( HLB-521) or equivalent ( subjected to approved before installation by technical committee of smart city limited of Dwarka, Royal fabrication, Karrare - mujasma

Providing and fitting of Two way Bracket ( HLB- 522) or equivalent( subjected to approved before installation by technical committee of smart city limited of Dwarka, Royal fabrication, Karrare mujasma Supply and fixing of lighting luminaries for

Supply and fixing of lighting luminaries for (SEEP HLYT-631 ) ( subjected to approved before installation by technical committee of smart city limited . The job includes fixing of 30 W led lamp.

Dismantling of existing Ornamental moulded cast iron poles to the exact position specified as per the drawing .The job includes providing and fixing of 1-3 Amp single pole MCB of Legrand /L&T/Siemens/ Hager, 2x 1.5 sq mm FRLS cu wire Havells , polycab make ,Spark earthing grouted in ground excluding the concrete foudation.

Providing of earthing of poles by using 8 No. of GI wire complete job

Supply and laying of 40 mm dia ( OD-40 mm HDPE Pipe (HDPE air Cushion ) ISI marked along with all accessories like bend coupler , sockets etc conforming to IS 14930, part II complete with fitting cutting , jointing etc in ground underground including execution and refilling but excluding sand cushioning and protective covering for laying of Cable.

Providing and laying of concrete for pole bottoms laid in 1:2:4 ratio of cement sand and 20mm nominal size of aggregates with 2 feet underground and 1 feet above ground with 400 mm in dia. Complete job including its frame work and carriage of materials upto laying site ,incl cost of 3No. to 4 nos foundation bolts and allied hardware as per requirement as per drawing complete job.

supplying , laying , testing and commissioning of 50 sqmm,31/2 core XLPE insulated PVC inner sheathed steel armoured Al-Cable of Havells/ Paramount/ Polycab make including making of necessary connections with proper size of al thimbles dully crimping tool laid as per site requirement incl excavation 1.5 ft and refilling as per approved drawing.

supplying , laying , testing and commissioning of 10 sqmm 2 core XLPE insulated PVC inner sheathed steel armoured Al-Cable of Havells/ Paramount/ Polycab make including making of necessary connections with proper size of al thimbles dully crimping tool laid as per site requirement including excavation 1.5ft and refilling as per approved drawing .

Supply , Installation, Testing and Commissioning of outdoor type feeder pillar made of heavy duty gauge sheet steel. The feeder pillar is to be fitted with 100 Amp MCCB TPN 25 KA with spreader links and phase barriers ( DZ series L&T make ), contactor 4P100 (ac1) with wide band coils(HPL MAKE ) with Astronomical timer ( L&T make ) , MCB 63A 4P 10 KA ( AU Series L&T make) , MCB 32A DP 10 KA(AU Series L&T make) 5 Nos, and should be provided and fitted with digital multifunction meters three phase class 1.0 ( elmeasure make) with CTs & . phase indicators and including making of necessary connection. the feeder pillars fitted with angle iron legs, grounded in concrete cement block(1 ft above ground and 2 ft above ground and 1ft wide) with carriage of civil materials from source to site of work.complete job.

Design ,manufacture ,supply and installation ,testing and commissioning of 25 KVA copper wound oil immersed Micro processor controlled servo Stabilizer to be utilized at various locations of the Jehlum Bund.

Providing and Fixing of 11 Watt IP-66 robust LED lighting fixture make PHILIPS/CROMPTON/ BAJAJ/WIPRO

Design, Supply, Installation, Testing, Commissioning of Complete Landscape Irrigation System on parks along Jehlum Bund, including creation of water source and all allied works on Turn-key basis with Operation and Maintenance for 2 years after successful commissioning. A. Supply, installation, testing and commissioning of HDPE Pipeline including providing of all fitting and accessories like elbows, tees, reducers, sockets, etc

63mm x PN6 HDPE Pipe PE80/63 (IS 4984) (MAKE: CAPTAIN / HARVEL / VERTX)

50mm x PN6 HDPE Pipe PE80/63 (IS 4984) (MAKE: CAPTAIN / HARVEL / VERTX)

40mm x PN6 HDPE Pipe PE80/63 (IS 4984) (MAKE: CAPTAIN / HARVEL / VERTX)

32mm x PN6 HDPE Pipe PE80/63 (IS 4984) (MAKE: CAPTAIN / HARVEL / VERTX)

Supply Installation, Testing and Commissioning of Sprinklers & Accessories

Super Pro (6-16m) 3/4" Female inlet , All Feature Of Pro Plus+With Flow Shut OFF & 75% radius Adj. NEXT GENERATION! (MAKE: K-RAIN-USA, RAINBIRD-SPAIN, RAIN-SPA-ITALY)

K-Rain Rotary Nozzle (Adjustable 90- 270 Deg or Full Circle) (RN100/RN200/RN300) (MAKE: K-RAIN-USA, RAINBIRD-SPAIN, RAIN-SPA-ITALY)

Swing Joint 1/2" (MAKE: HARIT, AUTOMAT, RAINBIRD)

Swing Joint 3/4" (MAKE: HARIT, AUTOMAT, RAINBIRD)

PP Service Saddle 63mm x 3/4"

PP Service Saddle 50mm x 3/4"

PP Service Saddle 40mm x 3/4"

PP Service Saddle 63mm x 1/2"

PP Service Saddle 50mm x 1/2"

PP Service Saddle 40mm x 1/2"

Supply Installation, Testing and commissioning of SAFETY & CONTROL VALVES with all allied fittings & accessories.

1" BSP Straight Flow Solenoid Valve(With flow control) (MAKE: K-RAIN-USA, RAINBIRD-SPAIN, RAIN-SPA-ITALY, HIT-USA)

1 1/4" BSP Solenoid Valve (With Flow Control) (MAKE: K-RAIN-USA, RAINBIRD-SPAIN, RAIN-SPA-ITALY, HIT-USA)

1.5" BSP Straight Flow Solenoid Valve(With flow control)…. (MAKE: K-RAIN-USA, RAINBIRD-SPAIN, RAIN-SPA-ITALY, HIT-USA)

2" BSP Straight Flow Solenoid Valve(With flow control) (MAKE: K-RAIN-USA, RAINBIRD-SPAIN, RAIN-SPA-ITALY, HIT-USA)

INTL CONTROLLER 4-22 STATIONS, 230V (MAKE: K-RAIN-USA, RAINBIRD-SPAIN, RAIN-SPA-ITALY, AUTOMAT-INDIA)

Direct Burial Gel Connector (MAKE: K-RAIN-USA, RAINBIRD-SPAIN, RAIN-SPA-ITALY, AUTOMAT-INDIA)

Powder Coated Enclosure for Irrigation Controller & other Electrical Equipments IP-55 - (MAKE: AUTOMAT, SURIYA, EPC)

Constant Volatge Transformer Single Phase(Output 220VAC)with Cut Off at 300VAC

14/1 Wire/M Cable with PVC cable conduct of 20mm

1" Single Union Plain/Threaded PN 10 Ball Valve (MAKE: HARIT, AQUA, AUTOMAT)

1.25" Ball Valve Single Union Plain /Threaded PN 10 (Long Handle) (MAKE: HARIT, AQUA, AUTOMAT)

1.5" Ball Valve Single Union Plain /Threaded PN 10 (Long Handle) (MAKE: HARIT, AQUA, AUTOMAT)

2" Single Union Ball Valve Plain/Threaded PN 10 (MAKE: HARIT, AQUA, AUTOMAT)

Flush valve/ Flush End Cap 50/40mm compatable with HDPE

1" Continuous Acting Air Release Valve with complete assembly (MAKE: HARIT, AQUA, AUTOMAT)

6" valve Box with Handle (MAKE: RAINBIRD, AUTOMAT, RAINSPA, K-RAIN)

10" valve Box with Handle - Lockable (MAKE: RAINBIRD, AUTOMAT, RAINSPA, K-RAIN)

12" Valve Box with Handle- - Lockable (MAKE: RAINBIRD, AUTOMAT, RAINSPA, K-RAIN)

1" One Piece Brass QCV (MAKE: HARIT, AQUA, AUTOMAT)

1" Male x 3/4" Female Brass QCV Key (MAKE: HARIT, AQUA, AUTOMAT)

1" x 1" Brass Swivel Elbow (MAKE: HARIT, AQUA, AUTOMAT)

2" AL. Pressure Release Valve with cover( Pressure Setting 2.5kg/cm2 to 5.5kg/cm2) MALE Connection (MAKE: HARIT, AQUA, AUTOMAT, ARAMAS)

2" Non Return Valve flanged ends (Engineering Plastic) (MAKE: HARIT, AQUA, AUTOMAT, ARAMAS)

Supply Installation, Testing and commissioning of Filteration and fertigation

SCREEN FILTER 20 M3/HR X 2" (MOC ENGINEERING PLASTIC) (MAKE: HARIT, AQUA, AUTOMAT, HARVEL, AZUD)

VERTICAL SAND FILTER WITH BACK WASH ASSEMBLY 20 M3/HR

2" Hydrocyclone Filter( with Elbow Assembly) - NEW!(15-25m3/hr): (MAKE: HARIT, AQUA, AUTOMAT, HARVEL, AZUD, CAPTAIN)

Supply Installation, Testing and commissioning of Electro-Mechanical Works

Providing, Installation, Testing and commissioing of Vertical Submersible Pumpset in 100mm Casing pipe with following specifications. The job includes providing and fitting all fittings and accessories upto delivery including cables, column pipe, etc on turnkey basis 1. Discahrge: 1.25 to 1.5 LPS, 2. Head: 55 m to 70 m,3. HP : max upto 3HP (SINGLE PHASE)

Providing, Installation, Testing and commissioing of 5KVA oil Filled transformer

Supply, Installation Testing and commissioning of outdoor type feeder pillar…

Supply, laying, testing and commissioning of 16 sqmm 2 core XLPE insulated PVC inner sheathed steel armoured Al-cable including making of necessary connections, etc

Civil Works

Providing & Fixing of 100mm uPVC Casing Pipe of CM garde , each of 3m length and as Per IS 12818 : 2010 including strainer

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: (all kinds of soil)

Construction of Closed Canopy for Electrical and filtration champer 10 'x 6'

Annual Operation & Maintenance AFTER COMMISSIONING (Mechanical equipments).

Ist YEAR

2ND YEAR

Providing and laying of DI pipes excluding trenching and refilling (External Works

400mm Dia D.I. (K7)

250mm Dia D.I. (K7)

150mm Dia D.I. (K7)

100mm Dia D.I. (K7)

Push on joints by way of rubber Gas Kit

400mm Dia D.I.

250mm Dia D.I.

150mm Dia D.I.

100mm Dia D.I.

Providiing and fixing of regulkatory valves of Talis,vague make of following dia

400mm Dia Sluice valve

250mm Dia Sluice valve

150mm Dia Sluice valve

50mm Dia Air valve

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 50 mm dia. nominal bore light (Medium)

Providing, fabrication of MS Pipe Specials made from 6mm/8mm thick MS Sheets of appropriate type as per site requirement The item includes cost of labour and all tupes of carriage of machinery to the site of work. Complete job.

Making connections from Distribution Branches. 25 mm to 40 mm

Providing and laying of DI pipes excluding trenching and refilling(External work) 100 mm dia D.I (K7

Push on joints by way of rubber Gas kit 100 mm Dia DI

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 50 mm dia GI

Making connections 50 mm -80 mm

Providing and fixing pipe specials

Carriage of material from source to site of work by mechanical transport or upto road site including loading,unloading and stacking.

Stones/ soling stone av. 9km

40mm Agg for an avg distance of 9km

20mm Agg for an avg distance of 9km

Sand from avg lead of 15 kms

Cement from Divisional Store avg 2 kms

Cement from Divisional Store avg 3 kms

Carriage of Tiles (paver) avg lead of 8 kms qty

Carriage of steel for an average lead of 3 km

Carriage of earth from an average lead of 20 km by Mechanical transport

Carriage/Disposal of dismantalled material i.e cement concrete from road site to suitable dumping site for an avg distance of 1km(Rubbish)

Carriage/Disposal of dismantalled stones i.e from road site to suitable dumping site for an avg distance of 1 km.

Carriage/Disposal of Excavated earth from road site to dumping site by mechanical means with an avg lead of 5kms.

Carraige/disposal of RS masonary from road site to dumping site for an avg. distance of 3 Km.

Carriage of 40 mm stone aggregate from average lead 14 km

Carriage of sand from average lead 14 km

Carriage of Nallah boulders and plums average lead 14 km

Carriage of bricks from average lead 30 km

Carriage of stones from average lead of 15 km

Cement from an average lead of 5 km

Carriage of tree guards from road site to Divisional store from an avg. distance of 5 km.

Carriage / disposal of building rubbish material for an avg. lead of 8 Km by M.T

Carriage/disposal of dismantled material i.e cement concret from raod site to suitable dumping site for an avg. distance of 1 Km.

Disposal of dismantled material (concrete) by way of mechnical means at an average lead of 03 k

Carriage / disposal of cewment concerete debris / building rubbsish by mechanical transport including loading unloading and stacking etc for an average lead of 10 kms

Carriage of materials by manual means at an average lead of 200 mtrs

Disposal /carriage of disposal of excavated earth by manual labour at an average lead of 200 mtr by Head Load.

Stones

40 mm agg.

20 mnm agg.

Cement

Carriage of materials by manual means at an average lead of 150 mtrs

Stones

40 mm aggregate

20 mm aggregate

Cement

Carriage of excavated earth b y manual means at an average lead of 150 mtrs

Extra Carriage of materials by manual means for an avg lead of 50 mtrs (H/L)

Stones

40 mm agg

20 mm agg

Cement

Tiles

Earth

Disposal of building rubbish material for an avg. lead of 50 mtr by Head load.

N S Associates PVt Ltd

M M SHAWL ENGINEER AND CONTRACTORS PVT LTD

M/S HAJI MOHAMMAD AFZAL KUCHAY AND SONS