REPAIR CLEANING OF SEWAGE LINE MANHOLES AND CONNECTED WORKS IN SMQ AREA AT AF STATION GWALIOR

Amount

Cleaning of chocked /blocked sewage lines of any bore, of any description and in any position by taking out loose sediment sand, grit, ash, sludge, rags, fibers or vegetation from the following depth of sewage line or by rodding/by mechanical means and well flushing with adequate water including removal of sludge/debris to a distance exc 250 m but nex 500m and buried under ground complete all as as specified and as directed. (a) Upto 1.00 M depth

(b) Exceeding 1.00 M and n exc 1.5 M depth

(c ) Exceeding 1.5 M and n exc 3.00 M depth

Opening & cleaning of blockage from kitchen /bath traps or WC any pattern by rodding or manually upto Ist manhole complete all as directed .

Cleaning of manholes of depth not exc 1.5 M deep mechanically or manually by taking off sludge/any deletrious material from the existing manhole of any size and removing the sludge to a distance beyond 2.00 KM from the habitation in sealed container and depositing the same complete all as specified and directed.

All as per item No-3 here in before but depth exc 1.5 M and n exc 3.00 M deep complete all as specified and directed

M&L for puncturing existing RCC/ SGSW pipe line of any dia at any places between manholes for cleaning blockage in pipes including necessary excavation, returning, filling in and removal of soil and making good the punctured area with CM 1:1 including cutting/ clearing away grass, vegetation, saplings, shrubs, bush, wood, undergrowth, roots along pipeline both sides upto a distance 2 Metre complete all as specified and directed.

Demolition of brick work built in cement mortar and incl all quins, arches, pillars etc complete all as specified and directed

M&L for brick work with sub class 'B' bricks old size , straight or curved on plan exc 6 M mean radius built in CM (1:4) complete all as specified and as directed.

All as per item No. 7 here-in-before but except bricks complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 CM thickness below or above ground level complete all as specified and directed.

Dismantling floor hearth or wall tiling incl cement mortar bedding but not backing & rubbish off the premises complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7-8 mm thick area of each tile exceeding 0.06 Sqm but not exc 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15 mm thick screed bed or bedding layer for laying floor finishes complete all as specified and directed.

M&L for glazed ceramic tiles ( 450 x 300 mm size) 6-7 mm thick coloured for work on vertical surfaces such as skirting and dado/riser etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 10 mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces as in backing for tiles in dados/skirting complete all as specified and directed.

Taking down cement plaster from brick or stone walls, etc including raking out joints , hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 15 mm thick plaster in CM 1:4 on fair faces of brick work , finished even & smooth without using extra cement mixed with and incuding water proofing compound as per manufacturers instructions complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M&L PCC 1:2:4 type B1 (using 20 mm graded stone aggregate), as in coping including necessary form work complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 ( using 20 mm graded aggregate) as in surface channels, drain and similar nature of work complete all as specified and as directed.

M&L for extra forming fair finished drain or channel 30 cm innner girth in cement concrete using extra cement including forming moulds mitred/stopped ends etc complete all as directed by Engineer-in-charge

S&F in repairs WC squatting pan “Orissa Pattern” of size 580 x 440mm white with integral foot rest (excluding flushing cistern & flush pipe) including replacement of cast iron P Trap of size 100 mm including connection to trap and to flush pipes etc and lime concrete bedding complete all as specified in SSR complete all as specified and directed.

Cutting of trees' roots penetrated into manholes /sewage line /trap etc of any girth and at any depth including application of hot bitumen to arrest sprouting and filling up the gap and making good the disturbed portion with and including cement concrete 1:2:4 mix, type B1 (using 20 mm graded stone aggregate) complete all as specified and directed.

S&F in repair PVC valveless, symphonic action type low level flushing cistern white with inlet ball valve, float and handle including brackets, 10 ltr capacity complete with flush pipe(Long bend) 32mm dia of make as approvrd by GE complete all as specified & directed.

Fixing Only in repair PVC valveless, symphonic action type low level flushing cistern of any type and capacity after and including necessary minor repair work as required at site complete all as specified & directed.

Excavation in trenches in soft/loose soil n exc 1.5 M wide & n 'exc 1.5 M in depth as in foundation etc and getting out in soft/loose soil complete all as specified and as directed.

Excavation in trenches in soft/loose soil n exc 1.5 M wide, 'exc 1.5 M but not exc 3.0 M in depth as in foundation etc and getting out in soft/loose soil complete all as specified and as directed.

Demolition and breaking up 75/110/150/200/250 mm bore drain pipes, soil , waste and pipes etc (RCC/ SWG/CI etc) of any description in trenches or floors, including connections and fittings and remove material from site of work. Complete all as directed.

Returning & filling- in soil including spreading, levelling watering and well ramming in layers not excd 25 cm thick each complete all as specified and as directed.

Removing excavated material to a distance exc 0.50 Km but not exc 1.5 km and depositing where directed at a level not exceeding 1.50 meter above the starting point complete all as specified and directed.

M&L for 150 mm dia internal SGSW pipes Gde 'A' quality laid in trenches jointed in CM 1:2 and tested after the pipes are laid and jointed complete all as specified and as directed.

S&F 200 mm bore reinforced concrete pipes class NP-2, laid in trenches and jointed with collars complete all as specified and directed.

S&F 150 mm bore reinforced concrete pipes class NP-2, laid in trenches and jointed with collars complete all as specified and directed.

M&L for concrete bed to pipes in PCC (1:4:8) type D2 (using 40mm graded stone aggregate) including packing under and haunching against the sides of pipes after they are laid to slope and tested for 150 mm bore sewer pipe line complete all as specified and directed .

M&L for concrete bed to pipes in PCC (1:4:8) type D2 (using 40mm graded stone aggregate) including packing under and haunching against the sides of pipes after they are laid to slope and tested for 200 mm bore sewer pipe line complete all as specified and directed .

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for 6 to 8 mm dia mild steel TMT bars , cut to length, bent to shape required, including cranking, bending for slab , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

M&L for 10 mm dia and over mild steel TMT bars , cut to length, bent to shape required, including cranking, bending for slab , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

M&L for precast RCC 1:1.5:3 mix, type A1 (using 20 mm graded stone aggregate) as in cover slab set in CM 1:4 incl necessary form work complete all as specified and directed.

Demolition and breaking up of 75/110 mm bore PVC/CI pipes fixed along walls/floors etccomplete all as specified.

S&F cast iron (sand cast) soil, waste and vent pipes in any length with or without ears, with cement joints fixed to walls etc all as specified. (a) 100 mm bore

(b) 75mm bore

S&F CI bends ( any radius ) with oval access dorrs, diminishing pieces or tapers (larger bore measured) of 100 mm bore complete all as specified and directed.

S&F CI bends ( any radius ) with oval access dorrs, diminishing pieces or tapers (larger bore measured) of 75 mm bore complete all as specified and directed.

S&F CI branch pieces, single (equal or unequal), ordinary or inverted(spigot/socketed type) or with parallel branches with oval access doors for 100 mm bore of pipe complete all as specified and directed.

S&F CI branch pieces, single (equal or unequal), ordinary or inverted(spigot/socketed type) or with parallel branches with oval access doors for 75 mm bore of pipe complete all as specified and directed.

M&L for cast iron floor trap with grating including jointing to waste pipe fixed in PCC (1:2:4) type B1, of 75 mm bore pipe size complete all as specified & directed.

M&L for cast iron Nahani trap with grating including jointing to waste pipe fixed in PCC (1:2:4) type B1, of 75 mm bore pipe size complete all as specified & directed.

S&F stack clamp for 100 mm bore cast iron pipe, made out of 50mmx5mm flat iron and 16 mm dia round iron stay including bolts and nut and securing end of stays to wall or roof complete all as specified and directed.

S&F stack clamp for 75 mm bore cast iron pipe, made out of 50mmx5mm flat iron and 16 mm dia round iron stay including bolts and nut and securing end of stays to wall or roof complete all as specified and directed.

S&F 110mm dia CI cowl complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints and laid in trenches or in floor of 110 mm bore size complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints and laid in trenches or in floor of 75 mm bore size complete all as specified and as directed.

Dismantling old plain or corrugated Asbestos cement sheeting in roof coverings etc and remove materials from site of work complete all as directed.

Dismantling of timber scantling (Unframed Work) 40 sqcm and over in section, in any position as in framed work complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M&L for Pre-painted galvalume alu. Zinc coating GI based corrugated steel sheet 0.50 mm thick (total coated thickness) of any colour having tensile strength 550 M pa minimum yield strength as in roof covering fixed using hot dip galvanized self drilling and self tapping screws neoprene and EPDM washers. (Note : minimum, yield strength 550 Mpa with hot dip alloy of 55% Aluminium, 43.5 %zinc, 1.5% Silicon and finished with resin coat on both surfaces)

M&L for Pre-painted galvalume alu. Zinc coating GI based plain steel sheet 0.50 mm thick (total coated thickness) of any colour having tensile strength 550 M pa minimum yield strength as in roof covering fixed using hot dip galvanized self drilling and self tapping screws neoprene and EPDM washers. (Note : minimum, yield strength 550 Mpa with hot dip alloy of 55% Aluminium, 43.5 %zinc, 1.5% Silicon and finished with resin coat on both surfaces)

M&L for mild steel work as in roof trusses (Framed), trussed purlins, crane gantries, rail and fastening and heavy bracket framing (Beam, Tee, Angle, Channel or flat sections) including distance pieces, cleats etc confirming to Fe-290 (Gde E-165) Quality A complete all as specified and directed.

M&L for preparation of new steel surfaces of any description exceeding 10 CM width or girth and applying two coats of synthetic enamelled paint over and including a coat of red oxide primer complete all as specified and directed.

M&L for 50 mm PCC 1:2:4 mix, type B1 (using 20 mm graded stone agg) as in flooring, laid in alternative bays, finished even and smooth without using extra cement complete all as specified and directed.

M&L for PCC (1:4:8) Type D2 (40 mm graded aggre-gate) as in foundations, filling and mass-concrete complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block 60mm thickness, M-35 Grade with grey cement & pigment any shape and size confirming to IS 15658-2006 with and including over 40mm thick stone dust/ sand cushining and PCC (1:2:4) type B1 side of path/paver block (kerbs), complete all as specified and directed.

All as per item No. 60 here in before but except interlocking paver block complete all as specified and directed.

Preparation of plastered or unplastered old decorated surfaces of wall including cornices by brooming down or steel wire brushing to remove of dust, dirt and loose scales of lime wash and other foreign material, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of white wash complete all as specified and directed.

Preparation of plastered or unplastered old decorated surfaces of wall including cornices by brooming down or steel wire brushing to remove of dust, dirt and loose scales of lime wash and other foreign material, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of cement base paint complete all as specified and directed.

Preparation of plastered or unplastered old decorated surfaces of wall including cornices by brooming down or steel wire brushing to remove of dust, dirt and loose scales of lime wash and other foreign material, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of exterior emulsion wall paint (Ace paint from Asian paint or wall mast from Berger paint) complete all as specified and directed.

GURU KIRTH BUILDERS

M/s Yash Construction

GWALIOR TRADE LINK

JAY PRAKASH SHARMA

M/S DHARMENDRA SINGH TOMAR

M/s Jai Durga Construction

MOHAN SINGH BHADORIA