ADDN ALTN ALONG WITH REPAIRS TO SHED BLDG NO P-70) AT MILIT GIRINAGAR PUNE

Amount

Dismantling asbestos cement (corrugated, semi currguaged etc) sheet as in roof covering,complete all as specified and directed.

Dismantling valley gutters plain steel sheets of any gauge/ thickness as in roof covering including naintal or Similar pattern roof covering,complete all as specified and directed.

Hacking out old broken glass from steel / metal frame,complete all as specified and directed.

Dismantling structural steel work including door, gates steel rolling shutters etc,complete all as specified and directed.

Dismantling ceiling boards/wall panelling of any description /insulation etc including cover fillets etc,complete all as specified and directed.

Demolition of cement concrete as in ground floor and paving not exc 15 cm thickness below or above ground level,complete all as specified and directed.

Demolition of stone/boulder ashlar facings, dressed stone work, precast concrete articles and precast concrete block walling built in cement mortar,complete all as specified and directed.

Taking down cement plaster on brick or stone walls including raking out joints , hacking for key , scrubbing down with water etc,complete all as specified and directed.

Rendering 15mm thick cement plaster in CM 1:4 on brick concrete or stone surfaces finished even & smooth without using extra cement,complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 sqm but not exceeding 4 sqm each and removing from site,complete all as specified and directed.

All as per item No.10 here-in-before but n.exc 1.5 sqm each,complete all as specified and directed.

Taking down shutters of any description n. exc. 2 sqm each,complete all as specified and directed.

Taking down steel tubing and connection including cleaning for re-fixing or removal to of dia 20 mm bore,complete all as specified and directed.

All as per item 13 here-in-before but size of bore 15mm,complete all as specified and directed.

S&F steel tubes medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors of dia 20 mm,complete all as specified and directed.

All as per item No 15 here-in-before but 15 mm dia,complete all as specified and directed.

Dismantling water tanks of capacity exc 500 litres and not exc 1000 litres,complete all as specified and directed.

S&F 1000 litres rotational moulded polyethene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position,complete all as specified and directed.

S&F ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and suitable for 20 mm bore pipe,complete all as specified and directed.

M&L for Pre-cast cement concrete block masonry with Type C1 1:3:6 (using 20 mm graded stone aggregate) solid blocks, exc. 10 cm in width and setting in cement mortar 1:6,complete all as specified and directed.

Rendering 10 mm thick on fair faces of brick stone in CM 1:6 even and smooth (without using extra cement) with sagol finish,complete all as specified and directed.

Pre-painted galvalume sheet of roof tile pattern/ any pattern approved by GE ( aluminium,Zinc and silicon coating) GI based, minimum thickness 0.50 mm of approved colour having tensile strength of 550 Mpa as in roof covering/cladding to wall , fixed with self tapping screw including ridges and crimp eaves,,complete all as specified and directed.

S&F crimp eaves of Pre-painted galvalume sheet ( aluminium, Zinc and silicon coating) GI based, minimum thickness 0.50 mm of approved colour having tensile strength of 550 Mpa as in roof covering , fixed with self tapping screw including ridges and crimp eaves,complete all as specified and directed.

S& F 1.25 mm plain galvanised , mild steel sheeting in valley gutter drip and straight flashing length and girth as fixed,complete all as specified and directed.

S&F mild steel of grade Fe-290 (Grade E-165) in bands, straps, supports or stays for rain water, ventilating pipes including bolts, if required, clamps, hold fasts, wall ties and similar small articles,complete all as specified and directed.

S&F, Non skid ceramic tiles Coloured 7 to 8 mm (square/rectangular) area of each tile exc 0.11 sqm but nexc 0.18 sqm in floors etc set and jointed in neat cement slurry & pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6,complete all as specified and directed.

M&L coloured glazed tiles 450 x 300x 7mm thick in dado set and jointed in neat cement slurry and pointed in colour cement to match and directed by Engr-in-charge with and including 15mm thick rendering in CM 1:4, complete all as specified and directed.

Rendering 15mm thick cement plaster in CM 1:4 on stone surfaces finished even & fair without using extra cement etc,complete all as specified and directed.

S&F steel rolling shutter 1.25 mm thick of laths including top cover , anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated complete , gear operated type with baved gear box and crank handle,complete all as specified and directed.

M &L for chequered cement concrete tiles (glossy finish) coloured of size 300x300x25 mm thick with grey cement and pigment, laid over & including 15 mm thick screed bed in cm 1:4, jointed and pointed in neat cement slurry as in entrance path,complete all as specified and directed.

M & L for framed work such as grills, gratings, etc. ends of bars shoulderedand or riveted work with square bars and flat iron, and similar work confirming to Fe-290 Gde-E-165,complete all as specified and directed.

M & L for new surface of steel over 10 cm width or girth,applying two coats of synthetic enamel paint over coat of red oxide primer, complete all as specified and directed.

S&F bib tap chromium plated cast copper alloy with capstan head but fancy type screwed down high pressure of 15 mm dia, complete all as specified and directed.

S&F 15 mm bore stop valve fancy type chromium plated , cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed.

S&F pillar tap chromium plated copper alloy with capstan head screwed down high pressure for 15 mm dia, complete all as specified and directed.

S&F in repairs, vitreous china wash down water closet pan, (pedestal pattern), white, with and including plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device etc, complete all as specified and directed.

S&F in repair viterious china squatting pan of orrisa pattern long pan size 580 x 450 mm white / colour with intergral foot rest (excluding flushing cistern and flush pipe), complete all as specified and directed.

S&F PVC connection 450 mm long 15 mm dia with PTMT Nuts, complete all as specified and directed.

S&F vitreous china wash hand basin of size 630 X 450 mm of cera cat No-1016A or equivalent including 15mm dia fancy type CP pillar Tap, 32mm dia waste coupling and waste pipe, complete all as specified and directed.

S& Fixed in repair vitreous china urinal, coloured of size 635 x 395 x 420Large flat back, complete all as specified and directed. Make- Cera Cat No 5001 or equivalent Neycer/Jaguar.

S&F rough cast wire glass 6.4mm thick exc 1.00 sqm but not exc 1.50 Sqm in size , fixed with metal boards , metal panel pins, complete all as specified and directed.

All as per item No 41 here-in-before, except wired glass, complete all as specified and directed.

S&F sheet glass 4 mm thick, figured glass, pin head type and glazing with oil putty or wooden beads supplied with shutters in square exc. 0.5 sqm in each pane, complete all as specified and directed.

S&F in repair PVC valveless, syphonic action type, flushing cistern, low level, 10 litres capacity, white, with inlet, ball valve, float and handle including PVC flushing pipe, 32 mm dia and fixed, complete all as specified and directed.

M&L for 75 mm thick Cement concrete 1;3:6 type C1 with using 20 mm graded stone aggregate as in plinth protection/path finished surface even and fair w/o using extra cement etc, complete all as specified and directed.

S&F in repairs PVC (SWR) pipes 160mm box single socketed in any length with rubber ring joints fixed to walls including bends for bore of pipe 160mm, complete all as specified and directed.

S&F Stack clamps out of 50 x 5mm flat iron, complete all as specified and directed.

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening,, complete all as specified and directed.

S&F second class hard wood , plain, solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

S&F 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type both sides (ISI marked) all with 6 mm thick teak wood edging all round, complete all as specified and directed.

S&F 300 mm long mild steel sliding door bolts, plate type, stove enameled black, with bright bolt not less than 16 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description, over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, and fixing in the frame at site, complete all as specified and directed.

S&F 150 mm long aluminium, anodized, barrel tower bolts of extruded section and fixed, complete all as specified and directed.

S&F stainless steel butt hinges of size 100 mm, complete all as specified and directed.

S&F extruded aluminium alloy handles, fabricated type, anodized of size 150 mm, complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of plastic emulsion, white or tinted, over 3mm thick wall care putty, complete all as specified and directed.

Complete removal of existing treatment of walls plasterd or un plastered and applying two coats of Oil emulsion paint over over 3mm thick wall care putty, complete all as specified and directed.

Complete removal of existing treatment and applying two coats of white wash on ceiling etc, complete all as specified and directed.

M&L complete removal of existing treatment on wall surface by washing with bio wash using 10 % bleaching powder in water and applying two coats of Premium Acrylic smooth exterior paint with silicone additives on external surface of wallsincl priming coat of exterior primer etc, complete all as specified and directed.

M&L for two coats of synthetic enamel paint to wood surface including preparation of surfaces exc. 10cm width/girth, complete all as specified and directed.

M&L for two coats of aluminium paint on steel surface including preparation of surface, complete all as specified and directed.

M&L for two coat of synthetic enamel paint to old steel surfaces including preparation of surface, complete all as specified and directed.

Complete Removal of entire existing water proofing treatment in any position including tarfelt plaster, lean concrete , gravels etc and applying cement slurry @ 3.00 Kg/ sqm on roof surface etc, complete all as pecified and directed.

M&L for 10 mm thick rendering in CM 1:4 over concrete surfaces (Roof) mixed with water proofing compound @ 3% by weight of cement, complete all as specified and directed. Note: Water Proofing compound shall be measured and paid for seprately as "Supply Only"

M & L for APP based polymeric membrane minimum weight 3 Kgs/Sqm and minimum 3 mm thick reinforced with polyster non-woven fabric ( wt not less than 150 gms/sqm laid over primed surface with bituminous primer conforming to IS- 3384 @ 0.3 litre/sqm and finishing with preventive coat with aluminium paint @ 100m/sqm,, complete all as specified and directed.

Supply only WPC.

M&L for Hardcore of gauge not exc. 63mm deposited, spread and levelled in layers not exc. 15cm thick watered and rammed to a true surface, complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate in sub base, complete all as specified and directed.

M & L Machine pressed rubber moulded pre cast concrete inter locking paver block M-35 grade, 60mm thick with grey cement and pigment & glossy finished any shape colour, size laid over 40mm thickness of consolidated sand cushioning, complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors, complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bends any radius, complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bends any radius, complete all as specified and directed.

S&F 75mm dia of outlet PVC (SWR) floor trap plain with grating including jointing with solvent cement, complete all as specified and directed.

S&F Towel rail brass CP 600mm long 20mm dia 'D' type, complete all as specified and directed.

S&F soap dish brass chromium plated, complete all as specified and directed.

S & F mild steel of grade Fe-410-w(Gde E-250 quality) for staircase framed including stringers,balusters,hand rails, rafter, purlin etc. incl small articles cleats, brackets fabrication & erection of same, complete all as specified and directed.

S&F Anodised aluminium section with powder coating ( minimum 50 micron thickness)for three track sliding type window shutters with standard aluminium section with locking arrangement,necessary joining clips,glazing clips,rubber packing, anodised aluminium snap beading, screws etc, complete all as specified and directed.

S&F Anodised Aluminium ventilator with top hung shutter and bottom fixed (powder coat 50 micron thickness) with necessary joining cleats,locking arrangement,glazing clips, aluminium snap beading,screws,etc, complete all as specified and directed..complete all as specified.

S & F anodised aluminium powder coated (minimum 50 micron thickness) for door shutters,Aluminium section weighing 0.55 kg/mtr.including necessary joining cleats,glazing clips,rubber neoprene packing,handles,hinges,aluminium snap beading,screws etc, complete all as specified and directed.

M&L for 20 mm thick granite (table rubbed and polished) in cooking platform, pillars, window-cills, jambs, steps and like in CM 1:4 over and including 15 mm thick screed in CM 1:6 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade, complete all as specified and directed.

S&F 12 mm thick clear tough glass including necessary fixing accessories etc, complete all as specified and directed.

S&F anodized aluminium powder coated of any colour (thickness of powder coating not less than 50 micron), in frame for doors, windows, ventilators, partition wall etc. with one or more rebates, shutters, grills including joining cleat for fixing etc, complete all as specified and directed.

S & F 4 mm thick pin headed or figured glass not exc.0.50 sqm in each as in ventilators,etc, complete all as specified and directed.

S&F Anodised aluminium snap grid frame work for false ceiling ,and provide 6mm dia G I hangers ( upto 1200 mm length) adjusting level fixed to roof slab or other roof support with mild steel flat 40*3 mm size &60 mm long complete all as specified and as directed.

M&L 18/19 mm thick block boards, grade 2 quality, interior grade, decorative type with decorative face veneer one face, Ditto.

GI frame work for wall paneling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm fixed to wall at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre, complete all as specified and directed.

S & F stainless steel wire cloth,0.36 mm nominal dia of wire and avegrage width of aperature 1.40 mm and fixed with stainless steel wire staples, etc, complete all as specified and directed.

S & F 12 mm thick Gypsum board in ceiling fixed with screw as per manufacturers instructions, complete all as specified and directed.

Labour only for making edges chamfered,splays in facework not exc.15 mm complete, all as specified and directed.

Excavating in post holes (or similar holes) each n.exc 0.50 cum gettign out returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm watering and removing surplus soil n.exc 50m and making good the surface in hard/dense soil, complete all as specified and directed.

Excavation in trenches not exc. 1.5Mtr in width & not exc. 1.5Mtr in depth for foundation of wall, pillars etc. and getting out in hard/dense soil, complete all as specified and directed.

M & L for PCC 1:3:6, type C-2 with using 40 mm graded stone aggregate as in mass filling around fencing post, complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation of walls, pillars etc. or mass concrete filling in foundation, complete all as specified and directed.

M&L for MS Angle iron as fencing post cut indepently and embedding in concrete including cutting tops to shape as directed , drilling holes , notching for wire at flat iron fillets , (for securing wire mesh etc) including all necessary drilling bolting or rivrting etc, complete all as specified and directed.

S&F Framed work such as grill,gratings,gates etc.with ends of bars shouldered or riveted,forged into spikes,framed guard bars,gates railings,ladders,etc.confirming to Fe-290,Gde E-165 incl portions framed and hung as ornamental and intricate design gates with pintal hinges,stops,hand made sliding bolts etc, complete all as specified and directed.

M & L for RCC Nominal Mix 1:2:4 type B-1 with using 20 mm graded stone aggregate as in footing concrete foundation etc, complete all as specified and directed.

M & L for RCC Nominal Mix 1:2:4,type B-1 with using 20 mm graded stone aggregate as in columns,pillars, etc, complete all as specified and directed.

M & L for 10 mm and over dia bars TMT,cut to length,bent to shape required including cranking,bending spirally hooping for columns,hooking ends & binding with ms wire annealed not less than 0.9 mm dia or securing with clips etc, complete all as specified and directed.

All as per item No.102 here-in-before, but 5 mm and upto 10 mm dia TMT bars as in stirrups,spacers and binders etc, complete all as specified and directed.

M & L for form work to sides of concrete in foundations,footing bases of columns etc, complete all as specified and directed.

M & L for form work to sides of columns,pillars,posts etc, complete all as specified and directed.

M&L for Precast concrete block masonary with PCC 1:3:6, type C-1 with using 20mm graded stone aggregate, exc. 10cm width & setting and jointing in CM 1:6, complete all as specified and directed.

M & L for 15 mm thick plastering on concrete surface finished surface even and smooth without using extra cement in CM 1:4, etc, complete all as specified and directed.

M & L for preparation of new plastered surface and provide two coats of cement base paint over a coat of primer etc, complete all as specified and directed.

Returning filling in, well watering ramming in layers not exceeding 25cm thick, complete all as specified and directed.

Removing of surplus excavated soil to a distance exc. 250mtrs and not exceeding 500 mtr depositing where directed at a level not exc 1.50 mtrs above the starting point, complete all as specified and directed.

Fixing only chain link fencing incl lines,any mesh,size and type of standards,rails,straining bolts etc, complete all as specified and directed.

Supply only chain link MS galvanised fencing, any size or type, complete all as specified and directed.

Preparation of new steel surfaces over 10 cm in width or girth and applying two coats of Synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

Taking down carefully aluminium / copper point wiring complete (light, fan socket & power) including unserviceable fixtures and fittings such as switches ceilimg roses pendents regulators sockets light fittings etc complete removing material to store for keeping in safe custody for taking credit & making good disturbed wall / floor etc, complete all as specified and directed.

Taking down carefully unserviceable DB with MCB SP/SPN/Isolator and metra plug and socket any type/size disconnecting and making good disturbed surfaces, complete all as specified and directed.

Taking down aluminium sub main wiring complete including conduit / casing patties etc, complete all as specified and directed.

M&L Point wiring complete with 1.5 sqmm single core PVC insulated and unsheathed cable 1100 volts, FRLS grade with multistranded copper conductor ISI marked drawn through in stove enamelled steel conduit fixed to walls / roofs / floors / ceiling etc. and including provision of 1.5 sqmm stranded copper conductor cable as earth continuity conductor and connected to common earth dolly, including modular cover plates and modular flush boxes, Plate for mounting for housing the switches, socket outlets, fan regulators etc, all as specified and as directed.

One light point controlled by one way switch.

One Fan/Exhaust fan point controlled by one switch and one regulator.

One 3 pin switch socket outlet point 5 Amps on independent board.

One 3 pin switch socket outlet point 5 Amps on same board with other switch.

All as per item No 117 here in before but with copper conductor cable for one 3 pin socket outlet, independent board with cable 2.5 sqmm size, complete all as specified and as directed.

S & Fix modular switch1 way 6A, 1 module, complete all as specified and as directed.

S & Fix modular switch1 way 16A, 1 module, complete all as specified and as directed.

S & Fix Modular socket out let 6A 2/3 on combined 2 module, complete all as specified and as directed.

S & Fix Modular socket out let 6A/16A-2/3 pin combined 2 module, complete all as specified and as directed.

S & Fix Ceiling rose surface backlite 65x50mm 3 terminals, complete all as specified and as directed.

S & Fix Fan regulator electronic 2 modular type volts AC 50 HZ ,100 Watts, 4 step, complete all as specified and as directed.

M&L for submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable , multistranded on the surface through and including suitable size of stove enamelled steel conduit fixed to walls / roofs / floors / ceiling etc with its accessories all as specified and directed by Engr-in -charge for the following

2 x 1.5 sq mm and 1x1.5 sq mm as earth wire.

2 x 2.5 sq mm and 1x2.5 sq mm as earth wire.

2 x 6.0 sq mm and 1x6 sq mm as earth wire.

4 x 6.0 sq mm and 1x6 sq mm as earth wire.

S & Fix LED Batten for LED tube light channel 18 watts fitting with necessary braket, clamps, incl. bolts, nuts & washers for fixing arrangement etc complete all as specifed and directed. Make - Bajaj Cat Part No -BLBR-DB118 or equivalent of Havells/ Crompton

S & Fix LED tube light Rod 18 watts with necessary fixing arrangement etc complete all as specifed and directed.. Make - Bajaj Cat Part No - BLRB 18W LED or equivalent of Crompton

S & Fix LED 10 W Batten integrated LED chanel fitting integral sleek extruded polycarbonate LED chanel with acrylic cover,Neutral/cool white with all accessories all as specified and directed by Engr-in-charge Make-Bajaj Cat Part No - BCLSB 10 WH or equivalent of Havells/Crompton

S & F for recess mounted 2' x 2' square LED panel 36 watts, 596 x 596 x 9 mm size, sleek design aluminium housing, polycarbibate diffuser white powder coated finish operating voltage 140 volts - 270 volts, AC, 50 Hz complete all as directed. Make-Bajaj Cat part No -BCTBLR 36W FP or equivalent in Wipro/Havells/ Philips

Supply and fix of pressure die cast LED highbay luminaire 1x100 watt with in-built control gear housing, heat resistant toughened glass to provide better lighting and connecting with twin core copper stranded cable complete all as specified and directed. Make : Crompton Cat No - LHB-100-CDL/60 or equivalent in Wipro/Havells / Philips

S & Fix sheet metal enclosure distribution board SPN, 8 ways 240 volts, with 200 amps rated bus bar, with IP 43 protection and double door, suitable for mounting MCBs,complete all as specified and as directed.

S & Fix sheet metal enclosure distribution board SPN, 4 ways 240 volts, with 200 amps rated bus bar, with IP 43 protection and double door, suitable for mounting MCBs,complete all as specified and as directed.

S & Fix sheet metal enclosure MCB DB TPN double door 4 way suitable for 415 V with 200 amps rated bus bar including flushed on walls and making good disturbed surfaces including taking down the old DB suitable for MCB 4 Pole as incomer,complete all as specified and as directed.

S & Fix sheet metal enclosure MCCB DB VTPN double door 4 way suitable for 415 V with 200 amps rated bus bar including flushed on walls and making good disturbed surfaces suitable for MCCB 4 Pole as incomer, complete all as specified and as directed. Make : Legrand cat part no - 507750 or equivalent in SCHNEIDER /L&T / ABB

S & Fix MCCB Tripple pole and neutral, 415 volts, 100 Amps, 4 pole, complete all as specified and as directed.

Supply and fixing MCB, Single pole 1 Amps, 240 volts, complete all as specified and directed.

S & Fix of MCB single pole, 240 volts, 6 to 32 Amp, rupturing capacity 10 KA, ‘B’ series complete all as specified and directed.

S & Fix of MCB single pole and neutral, 240 volts, 6 to 32 Amp, rupturing capacity 10 KA, ‘B’ series complete all as specified and directed.

S & Fix of MCB TP 415 volts 40 Amp, rupturing capacity 16 KA complete all as specified and directed.

S & Fix of MCB TP 415 volts, 63 Amp, rupturing capacity 16 KA, complete all as specified and directed.

S & F of MCB triple pole and neutral, 32 / 40 Amp 4 pole, complete all as specified and directed.

S & F for plastic body exhaust fan, AC single phase, 240 V of size 250 mm sweep with louvers including necessary connection and provision of flexible copper cable from ceiling rose, complete all as specified and as directed. Make - Bajaj Cat Part No -Maxma DX 8" or its equivalent in Crompton / Havells.

Taking down carefully ceiling fan of any sweep, keeping with safe custody and refixing the same with replacement of unsv 3 core PVC insulated PVC sheated 3 core multistranded copper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal over hauling the fan, replacement of fan condensor 2.5 Mfd and painted with synthatic enamel white colour paint by spray machine including filling of cavities with filler material complete all as specified and as directed.

S & F LED street light 30 W CUB type building security light pressure die cast aluminium housing LED street light lumaniries with IP 66 and complete accessories all as specified and directed. Make: Bajaj Cat Part no.- BCLST30W LED or equivalent in Crompton/ Havells.

S & Fix of bracket / arm for street light fiting made out of 40 mm dia GI pipe not exceeding 0.6 mtr long complete accessories including fixing of MS clamps 2 Nos nut and bolts complete.

M&L for earthing complete with galvanised steel earth plate electrode 600 X 600 X 6 mm thick buried directly in ground (earth pit not less than 2.25M deep below ground level) with top edge of the plate not less that 1.5M below normal grouond level connected to GI earth wire 4 mm dia by means of nuts, bolts, check nuts, washers of galvanised iron or steel all as shown in electrical plate No 03 of SSR Part-I connected to earthing test point / DB including excavation / earth work in any type of strata, removal of surplus earth, GI pipe for watering pipe with and funnel, PCC 1:3:6 Type C-1 chamber with 40 mm thick RCC 1:2:4 type B-1 in cover slab with TMT bars @ 150 mm c/c both way with GI protection pipe 15 mm bore complete all as specified and directed.Cost of earth lead & protection pipe upto 7.5m length shall be deemed to be included in the quoted rate.

M & L for earth continuty conductor of size 25 x 3.15 mm aluminium strip with saddles and fixing screws etc for roof conductors and down conductors above ground,complete all as specified and directed.

PCC 1:2:4 type B1 using 20mm graded stone aggregate as in foundation for GI tubing for fixing air termination,complete all as specified and directed.

Supply and fix air termination single pointed aluminium rod 12mm dia and 300mm long,complete all as specified and directed.

Supply and fixing GI steel tubing light grade 40 mm dia fixed on PCC foundation and clamped with iron clamp to masonary wall,complete all as specified and directed.

supply and fixing test point terminal block made of gun metal or phosphours bronze size 75x75x25mm and screwed including 3nos of 8mm dia 25mm long hex head screws with MS covers, .complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 600 X 600 X 6 mm thick buried directly in ground (earth pit not less than 2.25M deep below ground level) with top edge of the plate not less that 1.5M below normal grouond level connected to GI earth strip 32x4 mm by means of nuts ,bolts,check nuts,washers of galvanised iron or steel all as shown in electrical plate no 3 of SSR Part 1 connected to earthing test point/DB including excavation/earthwork in any type of strata,removal of surplus earth,GI pipe for watering with funnel ,PCC 1:3:6 Type C1 chamber with 40 mm thick RCC 1:2:4 Type B1 in cover slab with TMT bars@150mm c/c bothways with GI protection pipe complete all as specified and directed by Engineer-in-charge.

S&F Earth strip insulation, material ceramic, Max withstanding temperature 200 Def C,Curent flow each 630 Amp,housing type Procelain, voltage 2000V, Earth insulator ID No.16235167012 for fixing of earth strip of size 25 x 31.5mm, complete all as specified and directed.

Taking down carefully unservicable XLPE Cable any type and size completely & making good disturbed surfaces, complete all as specified and directed.

Supply and Laying and testing cable XLPE insulated heavy duty electric cables with aluminium conductor, 1100 volts grade, cross sectional area 25 sqmm , 4 core cable connecting lugs, glands,jointing materials etc., laid on wall, floors, roof, ducts and fixing using clamps, saddle, complete all as specified and directed.

Removing excavated material not exceeding 50 mtr and depositing where directed at a level not exceeding 50 mtr above the starting point, complete all as specified and directed.

Supply & Laying 50 mm outside dia double wall corrugated pipe (DWC) ISI Mark for enclosing cable below ground / road surface, to a required depth, including suitable size coplers for jointing of pipe all as per site requirement, complete all as specified and directed.

Material and labour for cutting of bituminous road / floor for laying of pipe / cables not exceeding 30 cm wide and not exceeding 60 cm deep including refilling / with material and , watering well ramming / compacting and making good with PCC 1;2;4,type B-1, 100 mm thick, complete all as specified and directed.

M &L for GI pipe ''light grade'' 50mm dia for road crossing / on wall / on pole for cable protection, complete all as specified and directed.

DEEPARTH INFRASTRUCTURE

KSP ENTERPRISES

vishalconstruction

agarwal and company

S G Enterprises