Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.3 LAccepted-AOC 1 1 MEREDITH STREET KOLKATA 700072 INDIA | KOLKATA | WEST BENGAL | 700072 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹39.4 L+₹3.7 L (10.3%)Rejected-Finance 0 HISAR HISAR HARYANA 125004 UDYAM HR 06 0052049 | HISAR | HARYANA | 125004 | L2 | Rejected-Finance Being higher bid value | |
| 3 | L3₹39.6 L+₹3.9 L (11.0%)Rejected-Finance | L3 | Rejected-Finance Being higher bid value | |
| 4 | L4₹39.7 L+₹4.1 L (11.4%)Rejected-Finance 53 TOLLYGUNGE CIRCULAR ROAD KOLKATA 700 053 | KOLKATA | WEST BENGAL | 700053 | L4 | Rejected-Finance Being higher bid value | |
| 5 | L5₹39.8 L+₹4.2 L (11.6%)Rejected-Finance 117 LENIN SARANI KOLKATA 700 013 WEST BENGAL | KOLKATA | KOLKATA | WEST BENGAL | 700013 | L5 | Rejected-Finance Being higher bid value |
Tender Value
₹34.5 L
EMD Value
₹69,000
Closing Date
5 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE ALIPORE KOLKATA
NO 1 NATIONAL LIBRARY AVENUE, ALIPORE, KOLKATA 700027
ADDL/ALTN IN VETERANS CELL AT HQ BSA COMPLEX AND IMPROVEMENT OF AREA DRAINAGE SYSTEM FROM GATE NO-1 TO BSA SIG COY LOC INCLUDING COOK HOUSE OF BSA UNDER GE ALIPORE KOLKATA
2022_MES_550578_2
GE/ALP (8086B) OF KOLKATA 2022-23
Open Tender
Civil Works
Item Rate
150 days
GE ALIPORE KOLKATA
Class D and category a (ii)
8 documents required · 8 mandatory
₹500
Yes
GARRISON ENGINEER ALIPORE
₹69,000
Yes
28 Jan 2023
22 Dec 2022
6 Jan 2023
22 Dec 2022
5 Jan 2023
29 Dec 2022
Amount
Taking down cement plaster including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
Taking down chowkhat or frames with shutter not exc. 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and as directed by the Engr-in-Charge.
Taking down chowkat or frames with shutter exc. 1.5 Sqm but n.exc. 4 Sqm each (without taking off shutters from the frames) complete all as specified and as directed by the Engr-in-Charge.
Taking down wooden shutters of any description exc 1.00 Sqm but n.exc 2.00 Sqm each complete all as specified and as directed by the Engr-in-Charge.
Taking down wooden shutters of any description exc 1.00 Sqm but n.exc 2.00 Sqm each and refixing the same in the same opening complete all as specified and as directed by the Engr-in-Charge.
Demolition of brick work built in cement mortar including all quions, arches, pillers etc complete all as specified and as directed by the Engr-in-Charge.
Demolition of cement concrete of any description and in any position not other wise specifically provided for complete all as specified and as directed.
Dismantiling of floor hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises (out of MOD land), complete all as specified and as directed by Engineer-in-charge.
Dismantling plain or corrugated steel sheeting, any gauge, thickness including nainital or similar pattern roof covering.
Dismantling ceiling boards any type and thickness including cover fillets complete all as specified and as directed by the Engr-in-Charge
Taking up or down 15mm steel tubing and connections, and removal complete all as specified and as directed by Engineer-in-charge.
Taking up or down 20mm steel tubing and connections, and removal complete all as specified and as directed by Engineer-in-charge.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks,etc., removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.
Chipping of unsound /weak concrete materials from slabs , beams,columns ,lintel,chajja, fin , facia etc. by any means as directed by engr-in-charge including tapering all edges, making square shoulders of cavities air or sand blasting etc and cleaning of exposed concrete surface of lightly picking materials by air blasting or sand blasting incl foreign matrials , loose concrete/aggregate etc and disposal of all debris out of MOD land and complete all as specified and as directed by Engr-in-Charge for 25mm average thickness for slabs/Chajja
All as per Item 14 but 50mm average thickness for beams/Lintel
Removing of concrete all around reinforcement including from behind the reinforcing bars to give an average 25mm (but not less than 15mm clear air gap)by manual methods (using wire brushing ,chiselling etc) and applying alkaline rust removing chemical followed by removing rust including from behind the reinforcing bars by emery paper and cleaning the area throughly by water and allow it to dry all as per manufacturer,s instruction to give it a totally rust free finished steel surface complete all as specified and directed by Engr-in-charge ( Make : SIKA/FOSROC) upto 12 mm dia bar.
Removing of concrete all around reinforcement including from behind the reinforcing bars to give an average 25mm (but not less than 15mm clear air gap)by manual methods (using wire brushing ,chiselling etc) and applying alkaline rust removing chemical followed by removing rust including from behind the reinforcing bars by emery paper and cleaning the area throughly by water and allow it to dry all as per manufacturer,s instruction to give it a totally rust free finished steel surface complete all as specified and directed by Engr-in-charge ( Make : SIKA/FOSROC) above 12 mm dia bar.
Material and labour for providing single coat of epoxy bond adhesive of prepared non metallic surface (existing surface) and applying by brush all as per manufactures instruction/specification. The bonding agent shall have minimum compressive strength of 40 N/Sqmm and complete all as specified and directed by Engr-in-charge.
Supply and application of Epoxy Zinc rich primer on the prepared steel surface by brush the primer shall have a minimium specific gravity 1.75 minimum weight film thickness/coat 40 microns and minimum adhesive bond strength with steel is 1.5N/mm2 complete all as specified and directed by Engr-in-charge. Make ; SIKA/FOSROC.
Material and labour for introducing new reinforcement bars for structural connection in RCC beams, columns, lintel and slabs including power drilling holes of appropriate diameters in reinforced or plain cement concrete to a minimum depth of 150mm and upto 200mm including power drilling,fixing the reinforcement in position using epoxy, cleaning of loose dust by blowing air, sealing with epoxy cartridges etc complete all as specified and as directed by Engr-in-charge. upto 12 mm dia bar.
Material and labour for providing and placing in position free flow non shrink cementitious micro concrete of Grade of M-50 to the effected beam, etc . The micro concrete shall have a minimium 1 day compressive strength of 10 Mpa and 28 days strength of 50 Mpa, minium tensile strength 5N/mm2 @ 28 days, minimium flextural strength 5N/mm2 @ 28days and complete all as specified and as directed by Engr-in-charge.( Make: SIKA/FOSROC/ELANTAS BECK/KUNAL CONCHEM) 50 mm average thickness of Beam.
Supply, mixing and application two component structural grade polymer modified reinstatement morter, where local spalling has taken place or shuttering is not possible . The morter can be applying in layers not exceeding 6mm thick in each layer in and upto any thickness in smaller vertical pockets and upto any thickness in horizontal applications. The mortar should have a minimium compressive strength 12N/mm2 in 1 day and 45N/mm2 in 28 days. Minimum flexural strength should be 8 N/mm2 in 28 days. A modified styrene butadience emulsion for use as a bonding aid and gauging liquid for cementious system to be mixed with cement slurry before the application of modified polymer mortar to be used @ 6 ltr/bag of cement. The bonding agent should have minimium compressive strength 24N/mm2. Minimum tensile strength 3.5N/mm2, minimium flexural strength 6.5N/mm2 complete all as specified and as directed by the Engr-in-charge upto 25 mm average thickness. Make :- Sika/Fosroc NOTE:- Cement and sand morter in proportion of 1:2 graded coarse sand ) with polymer admixed in proportions approved by Engr-in-charge)
Material and labour for applying curing compound over concrete surfaces as per manufactures instruction complete all as specified and as directed by Engr-in-charge.Make :- Sika/Fosroc
Providing of double layer self supporting steel scafolding to external perimeter of building duly cross braced and properly alignede for the functional aspect and safe of the building upto and including 05m hieght complete all as specified and as directed.
Demolition of RCC of any description and in any position not otherwise specifically provided for including cutting of reinforcement as required to facilate dismantling. complete all as specified and as directed
Use and waste of formwork to sides and soffit of beams, lintels, cantilevers, shelves etc for rough finished surface, flat complete all as specified and as directed by the Engr-in-Charge.
Material and labour for RCC M 30 (Nominal Mix) (using 12.5 mm graded crushed stone aggregate) as in parapets, balcony and similar work complete all as specified and as directed.
Supply and fixing TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed (upto 10 storey High of building)
Material and labour for brick work with sub class 'B' bricks built in cement mortar (1:6) straight or curved on plan exceeding 6 mtr mean radius and complete all as specified and as directed.
Material and labour for Brickwork with sub-class `B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and as directed.
Material and labour for Rendering 15mm thick in cement mortar (1:6) on other than fair face of brick work or concrete surfaces and finished the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.
Material and labour for rendering 15 mm thick, in cement mortatr (1:4), as on brick/concrete surface etc finish even and smooth without using extra cement complete all as specified and as directed.
Material and labour for Rendering 5mm thick with cement mortar (1:4) on or concrete surfaces and finished the surface even and smooth as in ceiling complete all as specified and as directed by Engineer-in-charge.
Material and labour for complete removal of existing treatment on old decorated surfaces of wall and applying two coats white cement based wall care putty and one coat alkali resistant primer, sanding the surfaces and finally applying two coats of Anticarbonation paint complete all as specified and as directed.
Material and labour for preparation of new plastered surfaces and applying two coats white cement based wall care putty and one coat alkali resistant primer, sanding the surfaces and finally applying two coats of Anticorbonation paint complete all as specified and as directed.
Material and labour for preparation of new plastered surface of wall/ceiling and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and as directed by Engineer-in-charge.
Material and labour for preparation of old decorated surface by complete removal of existing treatment, washing, rubbing, stopping etc and applying two coat of oil emulsion distemper over a coat of primer to match with the new suface on wall/ceiling complete all as specified and as directed by Engineer-in-charge.
Material and labour for Double charged vitrified ceramic coloured tiles light shade 8-9mm thick (square /rectangular ) polished area of each tiles not exceeding 0.36 sqm as in flooring etc. set and jointed in neet cement slurry and pointed white or coloured cement to match the shade of the tiles laid over and including 15mm thick plaster in cement mortar (1:4) for backing coat complete all as specified and as directed .
Material and labour for Double charged vitrified ceramic coloured tiles light shade 8-9mm thick (square /rectangular ) polished area of each tiles not exceeding 0.36 sqm as in skirting etc. set and jointed in neet cement slurry and pointed white or coloured cement to match the shade of the tiles laid over and including 10mm thick cement plaster in cement mortar (1:4) for backing coat complete all as specified and directed .
Roughening of surface of old concrete floor by picking , sweeping clean and washing down with water to remove dust etc complete all as specified and as directed by Engineer-in-charge.
Material and labour for Non-skid coloured ceramic floor tiles 7 to 8 mm thick area of each tile exc .11 sqm but n exc 0.18 sqm in floor set and jointed in neat cement slurry and pointed in white or coloured cement to to match the shade of tiles over and including 15mm thick screed bed in cement mortar (1:6). complete all as specified and as directed by Engineer-in-charge.
Material and labour Glazed ceramic coloured wall tiles of size 450x300x6mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10mm thick backing coat in cement mortar (1:4). complete all as specified and as directed by Engineer-in-charge.
Material and labour for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like over and including 15mm thick cement mortar bedding (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling complete all as specified and as directed.
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed by Engr-in-Charge..(upto 10 storey High of building)
Material and labour for cutting chases, pinning, in making good to facing where required of of brick wall and pointing in cement motrar 1:3 to ends and cutting chases for concealed water tubing and concealed conduit wiring ete and making good surfaces complete all as specified and as directed.
Supply and laying for 16 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls including all fitting in any grade complete all as specified and as directed
Supply and laying for 20 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls including all fitting in any grade complete all as specified and as directed
Supply and fixing 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipes complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repairs 15mm bore Brass CP bib cock fancy type with crutch or butterfly handle complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair 15mm bore Brass CP two way bib cock fancy type with crutch or butterfly handle complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair 15mm bore Brass CP angular stop cock concealed type with crutch or butterfly handle complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair PVC connection 15 mm size pipe with PTMT nut of Length 450mm complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repairs Vitreous China wash basin (white), flat back, size 580 x 450 mm, excluding taps, waste,chain and plug and porcelain stopper but including brackets, complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 40mm bore CPVC pipe with fittings complete fixed in wall/laid in floor complete all as specified and as directed by engineer-in-charge.
Supply and fixing 32 mm bore waste fittings, brass, chromium plated for glazed ware sinks, basins,etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed by engineer-in-charge.
Supply and fixing 32 mm bore brass CP bottle traps for wash basin with inlet and outlet screwdfor pipe and connections incl nessesary packing complete all as specified and as directed by engineer-in-charge.
Supply and fixing in repair 15 mm bore fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed by engineer-in-charge.
Supply and fixing in repair towel rail of brass chromium plated tube 19 to 20 mm dia 600 mm long `D' type complete fixed in repairs with brass chromium plated screw complete all as specified and as directed.
Supply and fixing in repairs 10 litres capacity PVC valveless, syphonic action type, flushing cistern, white colour, low level, white with inlet, ball valve, float and handle including brackets duly painted, 32mm dia PVC flush pipe complete all as specified and as directed by Engineer-in-charge.
Supply and fixing for 75 mm diameter of outlet of PVC(SWR) floor trap,Plain with grating including jointing with solvent cement complete all as specified and as directed by Engineer-in-charge.
Material and labour for 100mm thick PCC type D-2 (1:4:8) (using 40mm graded stone aggregate), as in sub base for floors, complete all as specified and as directed.
Material and labour for 25mm thick PCC (1:2:4) Type B-1 (using 20 mm graded crushed stone aggregate) as in sub base of floor complete all as specified and as directed by Engineer-in-charge.
Supply and fixing Solid PVC Mouded Door Frame of size 50mm x 47mm made out of 5mm Moulded/printed PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed by Engineer-in-charge.
Supply and fixing Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face with partical board core complete all as specified and as directed by Engineer-in-charge.
Supply and fixing 200 mm long Aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed
Supply and fixing 150 mm long Aluminium handles, cast type, anodised complete all as specified and as directed by Engineer-in-charge.
Supply and fixing 100 mm long butt hinges medium weight cold rolled mild steel and fixed complete all as specified and as directed
Supply and fixing for Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with SS wire staples complete all as specified and directed.
Supply and fixing Mild Steel framed work such as grills, gratings, etc. with ends of bars shouldered and or riveted, or forged into spikes, framed guard bars, barred iron doors, railings and similar work conforming to Fe-290 Gde E-165, complete all as specified and as directed and design/shap approved by by Engineer-in-charge.
Material and labour for preparation of new steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and as directed by Engineer-in-charge.
Material and labour for cement concrete ( 1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed by Engineer-in-charge.
Supply and fixing 110mm bore PVC(SWR) pipe single socket in any length rubber ring joints laid in trenchers or in floor complete all as specified and as directed by Engineer-in-charge.
Supply and fixing 110mm bore PVC(SWR) pipe bend single socket complete all as specified and as directed by Engineer-in-charge.
Supply and fixing 75mm bore PVC(SWR) pipe single socket in any length rubber ring joints laid in trenchers or in floor complete all as specified and as directed by Engineer-in-charge.
Supply and fixing 75 mm bore PVC(SWR) pipe bend single socket complete all as specified and as directed by Engineer-in-charge.
Material and labour for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-charge.
Supply and fixing for 2nd Class HW Plain, solid, straight chowkats and frames, wrought framed rebated on the solid, rounded or chanfered, put together with glue pinned at joints complete all as specified and as directed.
Supply and fixing for 30mm thick factory made flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both side complete all as specified and as directed.
Supply and fixing 300 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast al alloy complete all as specified and as directed
Material and labour for two coats of synthetic enamel paint over a coat of pink over 10cm width or girth on new wooden surfaces including preparation of surface complete all as specified and as directed by Engineer-in-Charge.
Material and labour for 25x4mm size mild steel flat iron as in hold fast conforming to Fe-290 Gde E-165 complete all as specified and as directed by Engineer-in-charge.
Material and labour for aluminium powder coated sections for sliding window and partitions etc. with suitable sections for frame and shutter fixed with dash through holder fastener with length not less than 75mm to walls/floors including locking arrangement and rubber gusket necessary channel, neoprene beading, clips, fixing screws, nuts etc. complete all as specified and as directed.
Dismantling water tank and removing to store of exc 250 & n.exc 500 litrs capcity complete all as specified and as directed.
Supply and fixing for Rotational moulded PVC water storage tank 500 Ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I. complete all as specified and as directed
Supply and fixing stainless steel toilet paper holder fixed in repairs to wall with chromium plated brass screws complete all as specified and as directed.
S&F in repairs, vitreous china wash down water closet pan, (pedestal pattern), white, with and including plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and directed.
Supply and fixing in repair CP hand shower (faucet) with one meter flexible tube 15mm dia with wall hook complete all as specified and as directed.
Supply and fixing for Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed Make:- Prayag or equivalent.
Supply and fixing in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm and including 32mm waste coupling of PTMT (half or full threaded) Minimum weight 32mm-45gms/40mm-60 gms) complete all as specified and as directed.
Supply and fixing for 25mm dia curtain rods dicorative aluminium alloy with fixing brackets including taking down old pelmet box complete all as specified and as directed.
Supply and fixing for bracket dacorative type for curtain rods aluminium alloy 20mm size complete all as specified and as directed
Supply and fixing for framed brackets of angles or tees with web and flanges cut to shape, drilled and counter sunk for screws including bending and welding angles as necessary, gusset plates, riveting, etc n,exc 10 kg each brackets confirming to Fe 290. Grade-E- 165(brackets over 10kg each to be measured under structural steel) complete all as specified and as directed.
Supply and fixing for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering /cladding to wall, fixed with J hook & washers complete all as specified and as directed.
Supply and fixing in repair for 18mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work in cup board including all hardware fitting like hinge, handle, locking arrangement complete all as specified and as directed by Engineer-in-charge.
Material and labour for 3mm thick wall care putty on wall/ceilling complete all as specified and as directed by Engineer-in-charge.
Material and labour for 75mm thick PCC (1:3:6) Type C-2 (Using 40 mm graded stone aggregate) as in plinth protection & hard standing complete all as specified and as directed
Material and labour for 4mm thick non asbestos cement falls ceilling tiles of size 595 x 595 mm of approved design fixed with powder coated GI grid consisting of main Tee section of size (15mm x 30mm), cross Tee section of size (15mm x 23mm), and powder coating GI wall angle of size (20mm x 20mm) suitable for mounting tiles of 595 x595 mm with 2 mm dia GI wire suspended including fabrication complete as per manufacturers instructions fixed with steel rawl plug with nut and bolts arrengement with gred size 60 x 120 cm complete all as specified and as directed by Enginer in charge.
Demolition and breaking up SGSW drain pipes including PCC bedding and haunching for 150 mm bore complete all as specified and as directed.
All as per item No 100 here-in-before but 200mm bore and -ditto-.
All as per item No 100 here-in-before but 300mm bore and -ditto-.
Dismantling of 100 mm dia cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out from wall or trenches, if required complete all as specified and directed.
Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre depth and getting out in soft / loose soil complete all as specified and as directed.
Excavation in trenches not exceeding 1.5 metre wide and exceeding 1.5 metre depth and getting out in soft / loose soil complete all as specified and as directed.
Returning, filling in, of soil including spreading leveling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed.
Removing exvated material to a distance n.exc 50M and deposited where directed at a level n. exc 1.5 M above the starting point complete all as specified and as directed.
Material and labour for PCC (1:4:8) type D-2 ( using 40 mm graded stone aggregate) as in bed to drain pipes of 150 mm bore of Pipe, including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed.
All as per item No 108 here-in-before but for 200mm bore drain pipes and complete all as specified and as directed
All as per item No 108 here-in-before but 250mm bore drain pipes andcomplete all as specified and as directed
Supply and fixing for Reinforced concrete pipes 150mm bore, class NP2,laid and jointed complete with collars including testing complete all as specified and as directed.
All as per item 111 here-in-before but 200mm dia and complete all as specified and as directed.
All as per item No111 here-in-before but 250mm dia and complete all as specified and as directed.
Cleaning/disilting of sewage line of any dia upto 100mm by rodding/by bamboo split, rope through pipe from manhole to manhole and having the pipe clean for easy flow of sewage line and removal of offensive material to a distance n. exc 50 mtr , deposit the material in excavated pit with and including spreading of bleaching powder including excavation and levelling of surplus excavated soil round the pit with and including spreading of bleaching powder complete all as specified and as directed.
All as per item 114 here-in-before but 150mm bore and complete all as specified and as directed
All as per item 114 here-in-before but 200mm bore andcomplete all as specified and as directed
Cleaning of accumulated sludge including sludge water from manhole rectangular or circular n. exc. 1.5 m deep from invert to top cover including connected sewage line and removal of sludge at a distance n. exc 50 mtr , deposit the material in excavated pit including excavation and levelling of surplus excavated soil round the pit including spreading of bleaching powder in the pit and cleaning of manholes with and including spreading of bleaching powder complete all as specified and as directed.
All as per item 117 here-in-before but exc. 1.5 m deep and complete all as specified and as directed
Supply and fixing in repair for 75mm thick precast RCPC drain cover including frame having load bearing capacity of 2MT(conforming to IS12592) with embossing RCCP 2MT of size 600x450mm as per site reqirement complete all as specified and as directed by the Engg in charge
Supply and fixing in repair for 75mm thick precast RCPC drain cover including frame having load bearing capacity of 5MT(conforming to IS12592) with embossing RCCP 5MT of size 900x450mm as per site reqirement complete all as specified and as directed by the Engg in charge
Material and labour for providing precast reinforced cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in cover slabs (for manholes etc) and like set in cement mortar (1:4) including necessary formwork complete all as specified and as directed. Note: Reinforcement shall be measured and paid for separately.
Supply and fixing for 8 mm dia and over TMT bars, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.
Material and labour for SGSW gully trap of size 150x150mm square or rounded mouthed type 'P' setting and jointing with existing pipe including making pit of size 300 x 300 x 300mm with necessary brick work and PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) complete all as specified and as directed.
Supply and fixing 100 mm bore cast iron (Spun) soil, waste and vent pipes in any length with or without ears with cement joints laid in floors and walls complete all as specified and as directed by the Engr-in-Charge.
Supply and fixing for CI bend (Spun) 100 mm bore diminishing pieces or taper complete all as specified and as directed by the Engr-in-Charge.
Supply and fixing cast iron (Spun) branch pieces, double (equal or unequal), ordinary or inverted(spigot or socket type) or with parallel branches, bore of pipe 100mm. complete all as specified and as directed
Supply and fixing for cast iron cowls,bore of pipe 100mm. complete all as specified and as directed
Supply and fixing as in repair 100 mm bore cast iron (Spun) branch pieces single (equal or unequal) (ISI Marked) ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed.
All as per item No 128 above but with oval access door 100mm bore and complete all as specified and as directed.
Supply and fixing as in repair 100 mm dia Cast Iron (Spun) Tee complete all as specified and as directed.
Material and labour for PCC (1:3:6) type C1 (using 20mm graded stone aggregate) as in surface channel and drains including necessary formwork complete all as specified and as directed.
Material and labour for extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms moulds,mi-tred/stopped ends etc complete all as specified and as directed.
All as per item No 132 above but add or deduct for each 25mm girth or part there of over or under 30cm and complete all as specified and as directed.
Material and labour for PCC type D-2 (1:4:8) (Using 40mm graded stone aggregate) as in foundations, filling mass concrete complete all as specfied and as directed.
Material and labour for PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) as in coping including weathering slightly rounded or chamfered angles etc with and including necessary form work complete all as specified and as directed by the Engr-in-Charge.
Material and labour for preparation of new plastered surface of wall and applying two coats of cement base paint over a coat of primer complete all as specified and as directed by Engineer-in-charge.
Material and labour for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like over and including 15mm thick cement mortar bedding (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling complete all as specified and as directed.
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed by Engr-in-Charge.
Material and labour for Surface excavation n.exc. 30 cm deep and averaging 15 cm deep and getting out in in Soft loose soil. complete all as specified and as directed
Material and labour for hard core of gauge n. exe 63 mm with broken stone deposited spread and levelled in layers n. exe 15 cm thick each layer and rammed to true surface complete all as specified and as directed by the Engr-in-Charge.
Material and labour for Machine pressed precast concrete coloured interlocking paver block of any shape and size confirming to IS 15658-2006 of 60 mm thickness, M 35 Grade complete all as specified and as directed.
Material and labour for cement concrete chequered tiles coloured prepolished, machine pressed 20mm thick and area of each tile not exc 0.16 sqm set, jointed and pointed in neat cement slurry in floors complete all as specified and as directed.
Material and labour for 20mm thick screed bed or bedding layer in cement mortatr (1:6) for laying of floor fishes complete all as specified and as directed.
Material and labour for 50mm thick sand filling under interlock tile flooring complete all as specified and as directed.
Material and labour for 100mm thick PCC (1:2:4) type B-2 (Using 40 mm graded stone aggregate) as in Path and hard standing including finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed.
RAJ ENTERPRISE
KAY BEE ASSOCIATES
S.S.ENTERPRISE
BHARUKA ENTERPRISES
Rounaq Enterprise
ELECTRO COMMERCIAL CO
Tirupati Buildcon Pvt. Ltd.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .