Construction of Toilet Complex at Madrassa Kentha

Amount

Earth work excavation by manual means in trenches for foundations, drains, (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m in all kinds of soils.

Providing/Laying of cement concrete of specified grade with 1:5:10 mix excluding cost of shuttering with 40mm aggregate size including loading,unloading and carriage of materials

Providing/Laying of cement concrete of specified grade with 1:3:6 mix excluding cost of shuttering with 20mm aggregate size with 30% boulders.including loading,unloading and carriage of materials

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand)including loading,unloading and carriage of materials

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 5.3.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size).including loading,unloading and carriage of materials.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.

15mm Cement plaster on the rough side of single or half brick wall of mix:1 : 6 ( 1 cement : 6 fine sand)

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.50 mm thick with 20mm nominal size stone aggregate.

Providing and fixing T-Iron frames for doors,windows and ventilators of mild steel

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6mm for diagonal braces and central cross piece.

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 15 mm dia. nominal bore

Providing and fixing brass bib cock of approved quality.15 mm nominal bore

Providing and placing on terrace water storage tank 500 liters

Providing and fixing indian type flushing seat

White washing with lime to give an even shade on New Work (three or more coats)

Distempering with 1st quality acrylic distemper (ready mixed)having VOC content less than 50 gms/litre, two or more coats on new work of approved manufacturer, of required shade and colour complete as per manufacturer’s specifications

Centring and shuttering including struting and proping and removal of form work for foundation and plinth etc

Centring and shuttering including struting and proping and removal of form work for slabs,etc

Provision for Citizen Information Board

MOHD AMIN WANI

BIR SINGH

HAFIZULLAH MALIK