8845/E8

Amount

Note:- Removal of following existing unserviceable wooden components of various MES furniture items or similar items carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, pinning, screwing nailing, wedging, glueing, providing hinges, applying putty to level the surface, placing every part in-tact and polishing the disturbed portion & Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching it with sand emery paper, the Wooden furniture shall be French polished with high gloss finish in light Walnut shade ,after properly cleaned and smoothened the surface. Top shall be 18 mm thick exterior grade pre-laminated particle board one side laminated in light Wallnut shade or as approved by GE, duly fixed with 4 mm thick teak wood beading in matching shade with synthetic adhesive(Fevicol SH). Make of particle board : Century/Archid /Green/Actiontesa. All kind of work will be executed where the furniture exist in different User Units of GE(Central) including BSO's Furniture Yard at BMC, and office hours only as directed by Engineer-in-Charge (Note applicable for item Srl No-1.01 to 20.05)

Bed hard:FD-246: Top shall be 12 mm thick BWR grade plywood. Make-Archidply/Century Ply/ Greenply.

Foot Rest as per drg.

Head Rest as per drg.

Stiffener as per drg.

Long Rail as per drg.

M&L for French polish with high gloss finish in light Walnut shade after properly cleaned and smoothened the surface by scratching the entire wooden pallets ,filling putty to the bore holes where ever required.

Chair dining FD-279:- Back rest.

Rear legs.

Front legs.

Leg stiffner.

Rails.

Nylon Buffers 20mm

As per item No - 1.06 but for chair dining.

Removing the existing unserviceable cane plastic from the chair and Recanning the chairs by true Godrej pattern with plastic cane 2mm to 2.5mm wide, white colour, quality as approved by GE all as specified and as shown on drgs.

Chair Easy FD-229:- Rear Legs/Front Legs.

Side rails for seat incl cane hole.

Rear/Front rails incl cane hole of legs.

Upper/lower rails for back rest incl holes.

Front/rear stiffeners.

Arm rest.

Nylon Buffers 20mm

As per item No - 1.06 but for chair easy.

Removing the existing unserviceable cane plastic from the chair and Recanning the chairs by true Godrej pattern with plastic cane 2mm to 2.5mm wide, white colour, quality as approved by GE all as specified and as shown on drgs.

Chair writing FD-280:- Back rest.

Rear legs.

Front legs.

Leg stiffner.

Rails.

Nylon Buffers 20mm

As per item No - 1.06 but for chair writing.

Removing the existing unserviceable cane plastic from the chair and Recanning the chairs by true Godrej pattern with plastic cane 2mm to 2.5mm wide, white colour, quality as approved by GE all as specified and as shown on drgs.

Chair dining Officer FD/MAP-II/04 :- Back rest.

Rear legs.

Front legs.

Vertical stiffner.

Rails.

Stiffner.

Seat made of 12mmm thick BWR grade plywood over which 40 density foam 75mm thick shall be provided duly fixed with good quality tapestry cloth as approved by GE.

Nylon Buffers 20mm

As per item No - 1.06 but for chair dining MAP with Cushion.

Chair Dining FD/MAP-II/05 :- Back rest

Rear legs.

Front legs.

Leg stiffner.

Rails.

Seat PVC Perforated as per drg.

Stiffner between and parallel to fornt and back rail,rest on side rail.

Nylon Buffers 20mm

As pe item No- 1.06 bur for chair dining.

Sofa set 5 seater (3+1+1 with cushion) FD-281&FD/MAP-II/03:- Leg as per drg.

Wooden batten as per drg.

Arm as per drg.

Taking out old pressed /torn old cushions from Nos set and Supply 40 density thick foam cushion of size 21”x 22” x 4” duly fixed with the GM fabric as approved by GE. Cushion cover with marking cloth shall be provided with good quality zip stitched on one edge of cushion cover with standard fitting.(Make of Cushion-kurlon Gold line).

Bearer as per drg.

As per item No - 1.06 but for sofa set 5 seater

Taking out old torn faded cushion cover from old cushions and S&F new cushion cover with marking cloth to the existing cushion. The cover of the cushion shall be GM fabric as approved by GE. Cushion cover shall be provided with good quality zip stitched on one edge of cushion cover with standard fitting.

Table bed side FD-276:- Top.

Shelf/bottom base of table bed side.

Side of table Bed side.

As per item No - 1.06 but for table bed side

Back ply 6mm commercial.

Table dining 3' x 3' FD-291:- Top.

Side rails as per drg.

Legs as per drg.

Nylon Buffers 20mm

L-shape corner of flat iron 25mm wide 5mm thick 4" x 4" between legs and rail to be fixed with screw.

As per item No - 1.06 but for table dining 3' x 3'.

Table dining 4' x 3' FD/MAP-II/03:- Top.

Long rails as per drg.

Legs as per drg.

L-shape corner of flat iron 5mm thick 4" x 4" between legs and rail to be fixed with screw.

Short rails as per drg.

Nylon Buffers 20mm

As per item No - 1.06 but for table dining 4' x 3'.

Table dining 6 person FD-273 & FD/MAP-II/03:- Top.

Long rails as per drg.

Legs as per drg.

L-shape corner of flat iron 5mm thick 4" x 4" between legs and rail to be fixed with screw.

Short rails as per drg.

Nylon Buffers 20mm

As per item No - 1.06 but for table dininig 6 person.

Table dining 8 person FD-273:- Top.

Long rails as per drg.

Legs as per drg.

L-shape corner of flat iron 5mm thick 4" x 4" between legs and rail to be fixed with screw.

Short rails as per drg.

Nylon Buffers 20mm

As per item No - 1.06 but for table dining 8 person.

Table dressing ladies FD-251:- Back as per drg.

Bottom as per drg.

Top as per drg.

Legs as per drg.

Drawers as per drg.

Looking mirror of size 366 x 1220 mm and 5 mm thick .Make-Saint gobain ,Modi Float, Triveni Float Glass.

Nylon Buffers 20mm

As per item No - 1.06 but for table dressing ladies.

Book Case FD - 237:- Top as per drg.

Sides as per drg.

Bottom as per drg.

Shutters shall be fixed with SS Piano hinges and SS Knob/ handles as per drg

Back shall be 6mm thick BWR Gde Plywood as per drg.

Shelves as per drg

Legs as per drg

Nylon Buffers 20mm

As per item No - 1.06 but for Book Case.

Side Board FD-1112- Top as per drg.

Side as per drg.

Bottom as per drg.

Shutters shall be fixed with SS Piano hinges and SS Knob/ handles and magnet cacher as per drg

Back as per drg.

Replacement of Top drawer shall be given five comrpment in equidistat space in front portion and one compartment in remaining portion.

Shelves as per drg

Drawer as per drg except top drawer.

Leg as per drg

Nylon Buffers 20mm

As per item no. 1.06 but for side board

Table writing FD-275:- Top as per drg.

Long rails as per drg.

Legs as per drg .

Short rails as per drg.

Long stiffener as per drg.

Drawers as per drg.

Shutter as per drg.

Adjacent sides of the box as per drg.

As per item No - 1.06 but for table writing.

Peg Table FD-384:- Top.

Long Rails.

Stiffener.

Short Rails.

Nylon Buffers 20mm

As per item No - 1.06 but for peg table.

Table centre FD-274:- Top.

Long Rails as per drg.

Legs as per drg.

Stiffener as per drg.

Short Rails as per drg.

Nylon Buffers 20mm

As per item No - 1.06 but for table centre.

Teapoy wooden FD-278:- Top as per drg.

Long Rails as per drg.

Legs as per drg.

Stiffner as per drg

Short rails as per drg.

Nylon Buffers 20mm

As per item No - 1.06 but for teapoy wooden.

Trestle Store Room Wooden FD-86 :- Leg of size 100mm x 100mm in section at top and 75mm x 75mm in section at bottom x 405mm high.

Cross stiffeners size 660mm centre to centre

Top rails of size 100mm x 100mm x 2440mm in section.

Long stiffeners size 2440mm x 60mm x 100mm in section.

Two coats of creosote oil including cleaning preparation of old surface complete as per drg and directed by Engr-In-Charge.

B N ENTERPRISE (BID ID -3474434)

P N GUPTA AND SONS (BID ID -3471849)

S S ENTERPRISE (BID ID -3474326)

SPECIAL CONCRETE AND CONSTRUCTION CO. (BID ID -3473246)

UNIVERSAL TRADING CENTRE (BID ID -3473141)

Tirupati Buildcon Pvt. Ltd. (BID ID -3472784)

JOY RAM ENTERPRISE (BID ID -3471233)