Proposed Construction of Namo Garden at Anand Nagar Open Space for Municipal Council Wani

Civil Work

Excavation for foundation in earth,soil of all types,sand,gravel and soft murum,including removing the excavated material up to a distance of50m .beyond the building area and stacking and spreading as directed, dewatering ,preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and struttingetc.complete.(Liftupto 1.5 m.) By Mechanical Means (SSR ITEM NO ; 21.02 )

Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Mechanical Means (SSR ITEM NO ; 21.06)

Providing soling using 80mm size trap metal in 15cm.layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. (SSR ITEM NO ; 21.38 )

Providing and laying Castinsitu/ReadyMix cement concretein M-10 oftrap / granite/ quartzite/ gneiss metal for foundation and bedding including bailing out waSter,Steel centering ,formwork ,laying/pumping,compacting,roughening them if special finishis to be provided,finishing if required and curing complete,with fully automatic microprocessor based PLC with SCADA enabled reversible DrumTypemixer/concrete Batch mixp lant(Panmixer) etc. complete. With fine aggregate (Crushed sand VSI Grade (SSR ITEM NO ; 24.01 )

Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (SSR ITEM NO ; 25.11 )

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (SSR ITEM NO ; 25.31 )

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (SSR ITEM NO ; 25.50 )

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete.(SSR ITEM NO ; 27.01 )

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete (SSR ITEM NO ; 27.05 )

Providing and casting in situ / ready mix PCC M15 grade of trap metal for coping to head walls / parapet including centering, form work, compaction and curing etc. complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with SCADA with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc )(SSR ITEM NO ; 11.30 )

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.

Providing and fixing mild steel grill railing 20 Kilogram/sq.m with size 75mm x 60 mm.and sill of 75mm.x 25 mm.and newel posts for staircases, including fabricating, fix-tures, erecting, painting the grill work with one coat of anticorrosive paint and two coats of oil painting with approved colour and polishing the sill, hand rail and the newel post with french polish.

Providing and fixing in position TMT-FE-500 Bar Reinforcement of various diameters for R.C.C.pile caps, footings ,foundations ,slabs ,beams columns, canopies ,staircase ,newels ,chajjas ,lintels pardis ,copings ,fins ,arches etc.as per detailed designs ,drawings and schedules .including cutting ,bending ,hooking the bars,binding with wires or tack welding and supporting as required complete.(SSR ITEM NO:-26.33)

Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for two days etc complete. NOTE: For Item Number 15 to 18 prior approval of Superintending Engineer will be necessary(SSR ITEM NO:-35.26)

Providing and erecting chain link fencing 1.6 M. height with G.I. chain link of size 50 x 50 mm, 8 gauge thick and fixed 75 mm above ground level on vertical M.S. Angles of 40 x 40 x 6 mm size, includind excavating pits for foundation and embedded in C.C. block of 1:4:8 mix of size 450 x 450 x 670 mm. at 1.75 M. c/c with iron bar 16mm dia as hold fast including welding link with angle frame at 30 cm c/c with nuts and bolts and horizontal M.S. Angles at top and bottom of 25 x 25 x 5 mm size and vertical M.S. flat 35 x 5 mm and 25 x 5 mm horizontal including cross support of 40 x 40 x 6 mm angles both side at every corner or bend embedded in concrete blocks of 1:4:8 of size 450 x 450 x 670 mm including 3 coats of oil painting etc. complete.

Providing and fixing factory made Hydraulically pressed Mechanically vibrated and compacted precast inter locking cement concrete paving blocks 80MM thick in M-40 grade of approved size and shape for City streets, small /medium market roads,low volume roads, utility cuts on arterial roads etc. as specified and as per IS 15658:2006 including cost of all materials, manufacturing, curing, transportation of blocks to work site including loading, unloading and stacking as directed, laying paving blocks in position over prepared bed of natural sand / crushed sand of 50 mm thickness including necessary excavation in all stratas, spreading blindge of fine sand over the prepared bed, compacting blocks by plate vibrator etc. complete.

Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader/ Paver on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- Plant Mix Method and Grading - I Material

Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etc. complete.

Item No :-2 SUPPLY OF GARDEN SOIL Supplying onsite garden soil well seived 90% to pass through IS.sieve of 10mm size free from stones nibbish like dried grass (oots and other such materials. The soil should be fresh tom query The colour of the sail generally be red. The soil will be measured by measuring box (farmal (hem includes royalty charges, transportation, ( loading, unloading etc. I Lead charges for 25 Kms is considered .

Item No.3 FILLING OF GARDEN SOIL Filling of fresh garden soil/silt & manure in excavated area including lead up to distance of 50 mtr

IItem No.4: PREPARING INSTANT LAWN Excavating the ground to the required depth of 20 cms removing and conveying unwanted stuff to a required distance as directed Filling fresh garden soll/sit manure in excavated area 31 proportion to a height of 20 cms. Mixing garden soil and manure thoroughly well, levelling, watering on previous night. Planting required variety of lawn grass as directed and maintaining till well established by watering, weeding, clipping miling etc, complete.

Plantation of Tree

Supplying on site fresh Garden soil (i. e. 3 part soil ) (free from stones rubbish like dried grass roots, other such materials) for excavated pit size area of 0.60 x 0.60 x 0.60m ( consolidated thickness).(As per P&G DSR 2022-23 Items of garden work,Sr No.52)

Supplying on site well decomposed Farm Yard Manure FYM (i. e. 1 part FYM) for excavated pit size area of 0.60 x 0.60 x 0.60m ( consolidated thickness).(As per P&G DSR 2022-23 Items of garden work,Sr No.53)

Item No . 2(B)- Cycus Plant 3/4 Fit

Item No . 11(C)-Bismarkiya Palm 5/7 Fit

Item No . 11(D)-Rahpis Palm 5/7 Fit

Item No . 11(D)-Green Wichmeri Palm 5/6 Fit

Item No . 11(E)-Royal Palm 8/9 Fit

Item No . 1(B)-Plumeria Alba 7/8 Fit

Item No . 1 (B)-Plumeria Dwarf singapore pink 3/4 Fit

Item No . 4. (C) Gulmohar 8/10 Fit

Item No . 9 .(C) Rain Tree

Item No . 7 .(C) Kadu Neem

Item No . 4. © Desi Badam

Item No . 11. © Silver Oak

Item No . 1. © Alstoniya/Satvin

Excavation pit size 0.60 x 0.60 x 0.60m forplanting small & medium ornamental plants/ large flowering/ shady trees (plant height 1 to 2 mtr.)/ palm varieties upto height 1 to 2 mtrs. in earth, soil of all types, soft murum, including removing the excavated & unwanted material up to a required distance of 50 mtrs. (As perP&G DSR 2022-23 Items of garden work,Sr No.11)

Filling fresh garden soil / silt & manure in excavated pit size area of 0.60 x 0.60 x 0.60m (1/10 of unskilled labour)(As per P&G DSR 2022-23 Items of garden work,Sr No.21)

Shrab-Plant of Tree

Supplying on site fresh Garden soil (free from stones rubbish like dried grass roots, other such materials) for excavation area of depth of 30 cms.( consolidated thickness).(As per P&G DSR 2022-23 Items of garden work,Sr

Supplying on site well decomposed Farm Yard Manure for excavation area of depth of 30 cms. ( consolidated thickness).(As per P&G DSR 2022-23 Items of garden work,Sr No.36b)

Item No . 1 (B) Gardenia/Anant

Item No . 1 (B) Ixora Duffy pink

Item No . 1 (B) Tagar mini

Item No . 1 (B) Mussaenda

Item No . 1 (B) Pentas

Item No . 1 (B) Plumbago

Item No . 1 (B) Powder puff plant

Item No . 1 (B) Tecoma capensis

Item No . 1 (B) Heliconia any type

Item No . 1 (B) Gardenia/Anant

Excavation for planting lawn/ shrub/ flower bed/ hedges/ edges/ canna bed in earth, soil of all types, soft murum, including removing the excavated material up to a distance of 50 mtrs. for a depth of 30 cms.(As per P&G DSR 2022- 23 Items of garden work,Sr No.3)

Filling fresh garden soil / silt & manure inexcavated area of depth 30cms. (1/10 of unskilled labour)(As per P&G DSR 2022-23 Items of garden work,Sr No.13)

Mixing garden soil/silt & manure thoroughlywell, watering previous night. Planting reqired plant species, lawn grass as directed etc.complete for required depth 30 cms. for planting lawn/ shrub/ flower bed/ hedges/ edges/ cannabed/ ground cover. (1/10 of semiskilled labour)(As per P&G DSR 2022-23 Items ofgarden work,Sr No.23)

Play and Gym equipment 2%

Electrification 5%

Please Enable Macros to View BoQ information