Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹78.0 LAccepted-AOC DH 101 DEEN DAYAL NAGAR MAHARAJPUR GWALIOR 474020 MP | GWALIOR | MADHYA PRADESH | 474020 | 1 | Accepted-AOC LOWEST | |
| 2 | 2₹95.3 L+₹17.1 L (21.8%)Rejected-Finance 86 NAROTTAM KUNJ MADHU NAGAR AGRA UTTAR PRADESH 282001 | AGRA | UTTAR PRADESH | 282001 | 2 | Rejected-Finance NOT LOWEST | |
| 3 | 3₹96.9 L+₹18.7 L (23.9%)Rejected-Finance 84 A VIJAY NAGAR COLONY LALGHATI PO NAYAPURA BHOPAL 462032 | 462032 | 3 | Rejected-Finance NOT LOWEST | |
| 4 | 4₹1.0 Cr+₹23.6 L (30.1%)Rejected-Finance RZ9 7 GALI NO 2 KAILASH PURI PALAM NEW DELHI 110045 | NEW DELHI | NEW DELHI | DELHI | 110045 | 4 | Rejected-Finance NOT LOWEST |
Tender Value
₹1.5 Cr
EMD Value
₹2.3 L
Closing Date
22 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE (AF) GWALIOR
CWE (AF) GWALIOR
REPAIR/MAINTENANCE OF CERTAIN ROADS IN TECH AREA AT AFS GWALIOR
2023_MES_597957_1
85057
Open Tender
Civil Works
Item Rate
180 days
GWALIOR
Please refer Tender documents.
8 documents required · 8 mandatory
₹1,000
GE (AF) TECH AREA GWALIOR
₹2.3 L
Yes
23 Sept 2023
24 May 2023
29 Aug 2023
24 May 2023
22 Aug 2023
7 Aug 2023
Amount
M&L for repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scouring sunken surface in roads, paths, etc. Cutting around edges to at least 25 mm in depth, making good by applying tack coat with paving bitumen VG-10 grade @ 5 Kg per 10 Sqm, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 Kg per 10 Sqm, blinded with 0.09 cum of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, blinder and chippings), Depth of potholes exceeding 30mm complete all as specified and directed.
M&L for preparing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc on black top /concrete surfaces then applying evenly priming tack coat with paving bitumen VG-10 grade over the prepared surface by mechanical sprayer @5kg/10sqm of surface area complete all as specified and directed.
M&L bituminous premix semi dense asphaltic concrete carpeting 30 mm thick consolidated thickness using paving bitumen of VG -30 grade of minimum 5.5% bitumen binder content by weight of total mix, spread by means of self propelled mechanical spreader/paver, rolled and compacted to required camber and gradient by using mechanical power road roller of 8 to 12 ton capacity complete all as specified and directed. Note :- (a) As a result of job mix formula, if quantity of binder content works out to be more than 5.5% than no extra payment shall be made to the concrete and in case its quantity works out be less than 5.5% than minimum binder content of 5.5% given herein above shall be provided. (b) The premix semi - dense asphaltic concrete shall be procured from computerized hot mix plant as approved by GE. (c) Contractor shall provide bitumen extraction apparatus alongwith benzene and other requisite material at site to determine the bitumen content without any extra cost
Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exceeding 400 sqm and exceeding 50mm deep & not exceeding 100mm deep complete all as specified and directed.
M&L for preparation of un-surfaced Water Bound Macadam by brushing with wire brush or removing caked mud etc. sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc. and applying evenly a tack coat with bituminous primer (paving bitumen) VG-10 @ 10 Kg per 10 Sqm using mechanical sprayer etc complete all as specified and directed.
M&L for 75 mm thick (compacted thickness) WBM laid with using stones aggregate (granite, trap or basalt ) of grading -2 (63 mm to 40 mm) size or grading -3 (50 mm to 20 mm) size, spread, watered rolled and consolidated to required gradient and camber with 8 to 12 tonne power road roller, etc. complete all as specified & directed.
Material and labour for laying and compacting 75mm thick (compacted thickness) Wet Mix Macadam (WMM) grading as per table 400-13 of MoRTH specification for Road and Bridge works 2013 manufactured in WMM plant, material comprising of clean, crushed, graded aggregate and granular material premixed with water to a dense mass, spreading with sensor paver and rolling with vibratory roller of capacity 8-10 Ton static weight and consolidating to required gradient and camber complete all as specified and directed. Note:-The finished surface tolerances to be as per Table 900-1 of MoRTH specifications for Road and Bridge works 2013.
M&L bituminous premix semi dense asphaltic concrete carpeting 40 mm thick consolidated thickness using paving bitumen of VG -30 grade of minimum 5.5% bitumen binder content by weight of total mix, spread by means of self propelled mechanical spreader/paver, rolled and compacted to required camber and gradient by using mechanical power road roller of 8 to 12 ton capacity complete all as specified and directed. Note :- (a) As a result of job mix formula, if quantity of binder content works out to be more than 5.5% than no extra payment shall be made to the concrete and in case its quantity works out be less than 5.5% than minimum binder content of 5.5% given herein above shall be provided. (b) The premix semi - dense asphaltic concrete shall be procured from computerized hot mix plant as approved by GE. (c) Contractor shall provide bitumen extraction apparatus alongwith benzene and other requisite material at site to determine the bitumen content without any extra cost.
M&L for premix bituminous macadam using binder paving bitumen (VG-30) @ 4.0% by weight of total mix, mixed in automatic hot mix plant with design mix and laid by using self-propelled mechanical paver, consolidated thickness 75mm or less laid/rolled and compacted to required gradient and camber using 8 to 12 tonne power road roller to achieve uniform smooth surface etc complete all as specified & directed. Note:-(i)In the event of increase in percentage of binder content as per job mix formula, nothing extra shall be admissible and quoted rate are deemed to include for the same. However, in case bitumen requirement is less than 4.0% same shall be regularized as per actual mix design with minus adjustment of less bitumen @ Rs.50.00 per Kg. (ii) Contractor shall provide bitumen extraction apparatus along with benzene and other requisite material at site to determine the bitumen content without any extra cost.
M&L for preparing of existing black top road surface removing dust, dirt, grease and other foreign matters, etc. to receive the marking and applying one coat of retro reflective thermoplastic road marking paint (white or yellow shade ) not less than 2.0 mm thick(average) in lines, arrow dashes & letters exceeding 10cm in width applied hot using application unit and retro reflective glass beads, @ 250 to 300 gm/sqm to withstand vehicular traffic load, material shall be conforming to BS-3262( Part- I) 1989 read in conjunction with the MoRTH (Ministry of Road Transport and Highways) specification, Vol-V as laid down in the specification for road and bright work latest revision etc complete all as specified and directed. Note - MoRTH specification shall be followed strictly for execution of work & suitable machine shall be used for the marking as approved by the GE. Shape & size/ patterns of marking shall be as approved by the GE before execution of work.
S&F in repairs cat's eye of size 90x110x17mm (Red/Yellow) made of ABS moulded body with polycarbonate/PMMA micro prismatic reflectors ultrasonically welded on both side for maximum retro reflection in wet and dry conditions and to be fixed with Epoxy-resin based adhesive at location decided by Engr-in-charge complete all as specified and directed.
S&F in repairs Solar road studs of size 125x125x25mm made of heavy duty aluminium alloy and polycarbonate, with 6 LED with stem . The studs shall be fixed by drilling holes for stem and using Epoxy-resin based adhesive at location decided by Engr-in-charge complete all as specified and directed.
S&F in repairs rubberised modular speed breaker of size 500x400x50 mm made of sturdy plastic (ABS) high resistance to severe impacts, interlocking grip design allows to behave one single Bump with pre-colour material (Black/yellow) and UV stabilisers result in permanent colours with and including acrylic reflectors fixed on front and back. Bottom hollow portion of speed breakers shall be filled with premix bituminous macadam and fixed on existing road surface by using Epoxy (Resin & hardener) and MS spikes for anchoring at the location decided by Engr-in-charge complete all as specified and directed.
S&F in repairs modular speed breaker of size 250x750x75mm made of sturdy plastic (ABS) high resistance to severe impacts, interlocking grip design allows to behave one single Bump with pre-colour material (Black/yellow) and UV stabilisers result in permanent colours with and including acrylic reflectors fixed on front and back. Bottom hollow portion of speed breakers shall be filled with premix bituminous macadam and fixed on existing road surface by using Epoxy-Resin based adhesive and MS spikes for anchoring at the location decided by Engr-in-charge complete all as specified and directed.
S&F in repair of solar panelled LED box type road sign boards including change of unserviceable LED lights, welding/soldering loose/disconnected circuit board, Signal cable, replacement of power cable with male and female connector from solar panel to LED box, etc complete all as specified and directed
S&F in repairs Road safety convex mirrors made up of Polycarbonate and body made of ABS/Fiber/Plastic including necessary fixtures and fittings complete all as specified and directed
M/s J S & SONS
POONAM ELECTRIC INDUSTRY
Adhunik Builders
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .