INSTALLATION OF CONCERTINA COIL OVER SECURITY PERIMETER BOUNDARY WALL OF SUKHOI ENGINE DIVISION

Labour charges for demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge

Providing and laying cement concrete 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing etc. all complete as per specification and direction of Engineer In Charge.

Centering and shuttering including strutting, propping etc. and removal of form for the same for Lintels, beams, plinth beams, girders, bressumers and cantilevers etc. all complete as per direction of Engineer in charge.

Plastering with 15 mm thick cement plaster on the rough side of single or half brick wall, concrete or any other surface of mix in cement mortar 1:4 (1 cement: 4 fine sand) etc. all complete as per specification and direction of Engineer In Charge

Finishing walls with Acrylic Smooth exterior paint of required shade on new work (two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) with preparation of surface etc. all complete as per specification and direction of Engineer In Charge

Supplying, carrying to site all approved materials & providing and fixing high Security fencing with SS 304/316 concertina coil fencing with punched tape concertina coil 600mm dia having 50nos of round per 6 m length, and with 9 horizontal R.B.T reinforced barbed wire , stud tied with staples and clips(1.5mm thick) to retain horizontal, including necessary bolt or barbed wire tied to MS angle/structural support arrangement etc. all complete as per specification and direction of Engineer-in-charge. with reinforced barbed tape (R.B.T)/ spring core (2.5mmthick) wire with tape 0.52mm thick(GSM 80 thick hot dip galvanised and width 18mm having series of barbed punch etc. (structural work shall be paid separately) etc. all complete as per specification and direction of Engineer In Charge

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer etc. all complete as per specification and direction of Engineer In Charge

Supplying, carrying to site all approved materials and providing and painting two or more coat with high gloss synthetic Enamel paint on Steel surface with preparation of the surfaces by using sand/ emery papaers, cleaning, removal of the scales, peeled surfaces , including erection of safe/ rigid scafoldings, cleaning the area after painting etc. all complete as per specification and direction of Engineer-in Charge.

Dismantling steel work in single sections Channels, angles, tees and flats including flexible wire rope in fencing dismembering and stacking within 50 metres lead in:all complete as per specification and direction of Engineer In Charge.

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done.

Supplying, Carrying to site all approved materials providing and fixing of safety stud Zinc galvanised steel anchor bolt drill dia 16mm, Anchor length 145-182 mm etc. all complete as per Specifications and direction of Engineer-in-Charg

Registration, HSN / SAC Code & GST Rate

Invoicing & Payment

Input Tax Credit

Penalty for Non-compliance of GST Act

Anti-profiteering Measure .

Other Provision

Allottment of quarters