Shifting of Lines and Transformer at Gordhoiya Nala Gorakhpur

Amount

Part - A Supply of Materials

3x185 mm² XLPE Cable Jointing Kit O/D 11 KV

3x185 mm² XLPE Cable Jointing Kit S/T 11 KV

Al. Lug 400/240 mm²

Al. Lug 150 mm²

DB Box

Number Plate

Danger Board with Clamp

Barbed wire

Bolts, Nuts, & Washers

11 KV Polymer Pin nsulator

33 KV Polymer Pin nsulator

11 KV Polymer Disc Insulator T&C Type

11 KV Polymer Disc Fitting T&C Type

33 KV Polymer Disc Insulator B&S Type

33 KV Polymer Disc Fitting B&S Type

11 KV Cross Arm

33 KV Cross Arm

11 KV Cross Arm clamp for PCC Pole

11 KV Cross Arm clamp for ST Pole

33 KV Cross Arm clamp for ST Pole

11 KV Top channel with ST Pole clamp with nut bolt by 50x8 mm MS flat Iron make

33 KV Top channel with ST Pole clamp with nut bolt by 50x8 mm MS flat Iron make

LT AB Cable Hanging clamp

I Hook

I clamp

Shackle Insulator

Suspension clamp

Neutral PRC

11 KV F-Bracket with complete fitting

33 KV F-Bracket with complete fitting

11 KV E-Bracket with complete fitting

33 KV E-Bracket with complete fitting

11 KV M.S. bracing Angle Iron

11 KV M.S. bracing Angle clamp with nut bolt for ST Pole with nut bolt by 50x8 mm MS flat Iron make

P.G. Clamp for DOG

P.G. Clamp for Weasel

11 KV T-Off with clamp

11 KV Angle for cable support

11 KV Angle clamp for cable support

33 KV Al. Binding wire

33 KV Earthing wire clamp

11 KV stay rod (20x1600mm)

11 KV Stay clamp for ST Pole/PCC Pole

G.I Wire 7/10 SWG

33 KV Stay rod (20x1800mm)

33 KV Stay clamp for ST Pole/PCC Pole

G.I Wire 7/8 SWG

Earthing rod

Aluminium Paint

Red oxide paint

A clamp (LT)

Pearsing connector

Guarding angle 33 KV/11 KV

Guarding angle clamp

M.S channel (Dropper) 125x65x2240 mm

M.S. angle (T/F Base) 75x75x6x2028mm

Copper Z clamp

Earthing Rod for T/F

Holding clamp for TPMO & fuse set

LT Incomming Pannel with metering

11 KV TPMO

Al. Leg barrel off size

4 core LT MCB with box

Iron Jaali for T/F safety

Special Pipe for T/F earthing (400/250/100KVA)

Special Pipe for cable earthing

G.I pipe for cable & naala crossing

Shifting, Loading Carriage & Unloading of following materials from store centre Gorakhpur to work site

PCC Pole 8.5 M

ST Pole 9 M

ST Pole 11 M

ACSR Weasel Conductor

ACSR Dog Conductor

ACSR Panther Conductor

3x185 mm² XLPE Cable 11 KV

LT Cable 2x10 mm²

LT Cable 4x16 mm²

LT AB Cable (3x120+1x95+1x16) mm²

LT PVC Cable 1x400 mm²

LT PVC Cable 1x240 mm²

LT Cable 3.5x150 mm²

Erection of Single pole structure on 8.5 mtr PCC Pole for LT AB Cable Hanging, including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (Neutral PRC, Shackle Insulator, Cable hanging clamp, Suspension clamps, Number Plate, danger board with clamp, barbed wire earthing etc. complete work).

Erection of Single pole structure on 9 mtr ST Pole for LT AB Cable Hanging, including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (Neutral PRC, Shackle Insulator, Cable hanging clamp, Suspension clamps, Number Plate, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing etc. complete work).

Erection of Single pole structure on 8.5 Mtr PCC Pole for 11 KV Line, including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (‘V' type cross arm 65 x 65 x 6 mm, clamps with bolt and nut, composite polymer pin insulator, danger board with clamp, barbed wire earthing etc. complete work).

Erection of Single pole structure on 11mtr ST. (SP-55) Pole for 11 KV Line, including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast), back filling of earth, proper ramming & fitting of all accessories ( 'V' type cross arm 65 x 65 x 6 mm, clamps with bolt and nut, composite polymer pin insulator, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing etc. complete work).

Erection of Double pole structure on 11 mtr ST Pole for 11 KV Line, including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. bracing angle iron with clamps, top channel 100 x 50 x 2240 mm with clamps, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing etc. complete work).

Erection of Double pole structure on 11 mtr ST Pole for 11 KV one Side O/H and one side U/G Line including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. bracing angle iron with clamps, top channel 100 x 50 x 2240 mm with clamps, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing etc. complete work).

Erection of Single pole structure on 11mtr ST. (SP-55) Pole for 33 KV line, including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (‘V' type cross arm 100 x 50 x 6 mm, clamps with bolt and nut, composite polymer pin insulator, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing etc. complete work ).

Erection of Double pole structure on 11 mtr ST Pole for 33 KV Line, including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. bracing angle iron with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing etc. complete work) .

Erection of Double pole structure on 11 mtr ST Pole for T/F equipment installation, including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. bracing angle iron with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing etc. complete work) .

Making of sectional T-Off as per site Requirement.

Laying of G.I. Pipe for Naala crossing and 33 KV 3x185 mm² ‘XLPE’ cable(D/C) by digging pit & making trench in Proper size (1M depth x1M wide) below ground level by fixing bricks(4½˝) on both side of trench wall and 9˝ brick work at the centre of the trench along the cable. Fixing brick slab on top after filling sand around both the cable including cost of bricks / As per Site requirement HDD Method can be used.

Jointing charges of 11 KV ‘XLPE’ C/J Kit 3x185mm² Outdoor/Straight Through

Rising of 33KV ‘XLPE’ cable in air after providing 6” dia. M.S pipe 3 m long Complete work.

Special GI Pipe Earthing Complete for 11 KV ‘XLPE’ C/J Kit.

Dismantling and re-stringing of existing AB Cable and stringing of New AB Cable

Disconnection and Reconnection of consumer cable connection in the path of Shifting of line as per follwoing details.

L.T. and Domestic Consumer connection.

Commercial and Power Consumer Connection.

Laying, spreading, lifting and final sagging for 11 KV 3 phases of ACSR Weasel/Dog conductor in accordance with profile and sag chart including binding, Jumpering and fixing of P.G. Clamp as per requirement in 03 Nos. conductor in parallel at different places.

Laying, spreading, lifting and final sagging for 33 KV 3 phases of ACSR Panther/Dog conductor in accordance with profile and sag chart including binding, Jumpering and fixing of P.G. Clamp as per requirement in 03 Nos. conductor in parallel at different places.

Shifting, loading, Carriage and re-installation of Existing 25/63 kVA T/F Pole Mounted from Existing place to Shifted Place (As per site requirement).

Shifting, loading, Carriage and re-installation of Existing 100/160 kVA T/F Pole Mounted from Existing place to Shifted Place (As per site requirement).

Shifting, loading, Carriage and re-installation of Existing 400/250 kVA T/F Pole Mounted from Existing place to Shifted Place (As per site requirement).

Making T/F Plinth 2x2x1.5 mtr. with complete material as per requirement

Grouting of stay rods (20 x 1800)/ (20 x 1600) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing.

Guarding between two poles like single poles, double poles, four poles, etc. to guard LT, 11 KV Line telephone and river crossing, road crossing etc. with G.I. wire no. 6 SWG and G.I. wire no. 8 SWG, cutting, fabrication and fixing of guarding channel 75 x 40 x 3010 mm with clamps nut & bolts etc. as per drawing.

Dismantling and receive back of existing materials to store centre Gorakhpur details as per following -

Single Pole on 11 mtr. ST Pole.

Double Pole on 11mtr. ST Pole.

Tri Pole on 11mtr. ST Pole.

Single pole on 8.5 mtr. PCC Pole. (Only dismantle Not receive back to store).

Double pole on 8.5 mtr. PCC Pole (Only dismantle Not receive back to store).

Single Pole on 11 mtr. Joist/ Rail Pole.

ACSR Dog / weasel conductor and rolling in pieces.

M/S SHUKLA ENTERPRISES

INDIA SUPPY CORPORATION