LOT 3 Restoration work of Circle Office and Divisional Office of Madhya Ganga Organization at Canal Colony Bulandshahr.

Amount

Earth work in foundation in dry ordinary soil ( loam clay or sand) including lift up to 1.50 meter and lead up to 30 meter and including back filling, watering and ramming of excavated earth in to trenches or into the space between the structure and the sides of foundation trenches or into the plinth with removal and disposal or surplus earth as directed by the Engineeer-in-charge uo to a distance of 30M from the foundation trenches. ( Building)

Providing and Laying Cement concrete 1:3:6 with cement, coarse sand and 25 to 37.25 mm stone grit including cost of all material,Labour and T&P etc. complete.

M 100 Brick work in 1:4 cement mortar with (1 cement : 4 coarse sand ) including supply of all materials, labours and T&P etc. required for proper completion of the work.

M.S.iron work of small sizes and section such as holding down bolts,hold fast, tie rods grating etc. wrought to required from including supply of steel bolts,nuts wastage etc. and their fixing required for proper completion of the work for M.S. Grills & Stair case railing.

Providing corrugated G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washer filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlines, rafters and trusses and including cutting to size and shape wherever required. 1.00 mm thick with zink coating notless than 275 gm./Sqm

Dismantling existing plaster including disposal of refuse with in distance of 60 meters.

12.50 mm thick cement plaster on brick work with cement mortar of mix 1:4 (1 cement : 4 Coarse sand) including supply of all materials, labours and T & P etc. required for proper completion of the work.

Scraping old white or colour wash including disposal of refuse with in 60 mtr.

Distempering with dry distemper of approved brand and manufacturers two coats of required shade on undercoated wall surface to give an even shade over an including a priming coat of whiting after throughly brushing the surface free from free from mortar dropping and other foreign matter including preparing the surface even and sand papered smooth

Finishing walls with with weather coat by premium acrylic exterior paint applied @1.67 ltr/10 sqm of approved make and quality on wall with two or moar coat to give an even shade including priming coat with cement primer of approved brand exterior primer applied @2.20kg/10sqm after throughly brushing the surface free from mortar dropping and other foriegn matters and sand pappered smooth including supply of all material ,labour etc.

Renewing panes of glass in door , window & ventilators or fixing in new work with 3 mm thick glasspanes fixed with brads & putty incl. supply of all materials labour , tools & plants , required for proper completion of work

Supply and fixing Fly and Mosquito proof stainless steel Grade 304 wire mesh gauge with 0.50 mm dia wire and 1.40 mm wire aperture or expended metal heavy quality over windows and including supply of C.P., teak wood batten 8 cmX 1 cm.(3"x3/8")/ flat iron 25mm x4mm and including supply of necessary screws all materials, labour, Tools & Plants etc. required for proper completion of the work.

Applying ready mix primer on wood surface including cost of all materials.(Rates Inclusive of repairing surface, preparing of surface by thoroughly cleaning oil, grease, dirt and other foreign material and scour with wire brush etc.)

Providing and fixing 1mm thick M.S. sheet garge door with frame of 40x40x6 mm angle iron 3.15 mm (1/8") thick M.S. gusset plate at the junction and corners including supply and fixing of necessary fittings.Lock rail of 15" length of oxidized iron and incl. pintels hooks at the top and applying priming coat of red lead paint on all sides complete. Using M.S. angles 40x40x6 mm for diagonal bracings

Reinforced steel including bending, binding,cutting and placing in position including cost of matarial, binding wire and labour and T&P etc complete.

Painting 1st coat over priming coat (but excluding cost of priming coat) on steel and other metal surface including cleaning the surface of all dirt, dust and other foreign matter, sand papering and stopping including cost of materials, labours, tools and plants etc. as required for proper completion of work. Paint shall be used as per standard I.S. specification.As per IDSOR Ch. XI Item 2A

Providing and Laying Size 600X600 mm Vitrified floor tiles in different sizes (thickness to be specified by the manufactureer ) with water absortion less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 9 1 cement ; 4 coarse sand), jointing with grey cement slurry @ 3.3 Kg/sqm including grounting the joints with white cement and matchingg pigment etc., complete.

S/F 6mm (1/4") China White glazed tiles in flooring or skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete, including supply of all materials, labour and tools and plants.

2.5 cm thick and of Cement Concrete consisting of 1 part cement,1½ part approved coarse sand and 3 parts approved 10 mm. graded stone grit and including water proofing material as ordered by the Engineer-in-charge in the proportion as specified by the manufacturer. as per PWD Meerut SOR Ch. 7 Item 361

Providing wall putty on new surface with approved quality material of Berger/J.K./Birla or similar make 2 coats.

Dismantling C.C. or brick or granolithic floor including base concrete and including stacking of dismantled materials as directed by Engineer-In-Charge within a distance of 60 meters.

Providing and lying 25 mm thick cc floor with out base concrete with neat cement fineshing i/c all material labour T&P etc complete

R.C.C in 1:1.5:3 (M 200) with cement, coarse sand , and stone grit 10-20 mm. including cost of all materials labour T&P complete etc .

Centering and Shuttering for R.C.C./R.B. work including cost of centering and shuttering up to 3m height

Fabrication mild steel iron work of small size and sections such as grating and chaukhats , roof work incl. where necessary and fixing bolts as required for completion of work.

Supply and fixing of 4cm. Thick C.P. Teak wood Fully Panneled door and window shutters including supply and fixing of wooden cleats and stops and fitting but excluding their supply of hinges, bolts, locks,handles, springs, and/or other fitting but excluding their supply and including painting with two coats of Black Japan on all iron fittings if necessary & including fixing the glass panes (5mm thick) with putty and brad.(Fitting with necessary screws to be supplied Separately)

Dismantling doors and window leaves including stacking material with in distance of 60M

Dismentaling of brick work i/c cost of all labour T&P lead and lift etc. required for proper complition of work as per direction of Engineer in charge.

P/F Water Closet squatting pan (indian tyape W.C. pan ) with 100mm sand cast iron P or S trap, 10 letter low level white P.V.C. flulshing cistern incl. flush pipe , with manually controlled device (handle lever) conforming to IS:7231 with all fitttings and fixtures complete ,including cutting and making good the walls and floors whenever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.

P/F Wash basin sizes 550x400 with C.I Brackets,15 mm C.P. brass pillar tyaps,32mm C.P. brass waste of standard pattern i/c painting of fitting and brackets,cutting and making good the walls wherever require.White Vitreous China Washbasin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. For 15 mm nominal outer dia pipes

Same as item no 31 but for 20 mm nominal outer dia pipes

Same as item no 31 but for 25 mm nominal outer dia pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) 25 mm dia noninal outer diapipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings, with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer-in-Charge. External Work

Providing and fixing 25 mm nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end) :

Providing and fixing 20.mm nominal bore ball valve (brass) of approved quality, High or low pressure, with plastic floats complete

Providing and fixing C.P.15 mm nominal bore brass bib cock of approved quality conforming to IS:8931

Providing and fixing 15 mm nominal bore C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.

Providing and fixing 600×450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing on wall face 75 mm dia PVC pipes conforming to IS Make working pressure 6 kg/Cm2 including T&P and Labour all complete fittings

Supplying and hoisting 500 litres of Sintex or euivalent high density polyethylene seamless of piece moulded tanks and placing the same in proper position i/c all materials, labours and T&P etc. for proper completion of the work. Tank Should be ISI marked, Sintex or Equivalent and I/C all taxes

Painting top of roofs with bitumen of approved quality @ 17 kg per 10 sqm impregnated with a coat of coarse sand at 60 cudm per 10 sqm, including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete with residual type petroleum bitumen of grade VG-10

Providing and fixing white vitreous china flat back half stall urinal with 5 litre PVC automatic flushing cistern of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS :2556, C.I. trap with outlet grating and other couplings in C.P. brass,including painting of fittings and cutting and making good the walls and floors wherever required

Laying of I shaped precast Interlocking tiles of thickness 80 mm (Rubber moulded Grey) (Compressed strength not less than 30 mpa and weight 4.50 kg.) including 25 mm thick local sand base levelling and dressing of surface to required level and slope, filling joints with local sand all complete work, including VAT.

Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos / Lindane E.C. 20% with 1 % concentration

Wiring point for light with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit pipe on surface, complete with 14 SWG copper earth continuity wire,GP Box ,piano type switch and ceiling rose/angle/ batten holder on 3 mm. thick phenolic laminated backelite sheet etc. complete in all respect, as directed .

Wiring point for fan /fresh air fan (light duty exhaust fan) with 1.5 sq.mm.FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit pipe on surface complete with 14 SWG copper earth continuity wire, piano type switch & ceiling rose on 3 mm. thick phenolic laminated backelite sheet etc, complete in all respect. but in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit.

Wiring Point for plug with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit pipe on surface, complete with 14 SWG copper earth continuity wire , GP Box and piano type switch and socket etc.complete in all respect. but in PVC conduit with 1.5 sq. mm. FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit.

Wiring point for call bell with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit pipe on surface, complete with 14 SWG copper earth continuity wire ,GP Box , and piano type bell push or 2 pin socket etc. complete in all respect. but in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit.

Supply and wiring of submain with two number 4 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy guage rigid steel conduit on surface, with one number 14 SWG copper earth continuity wire, complete in all respect. but in 20mm dia heavy duty (2mm thick) PVC conduit with one number 2.5 sq. mm. multistrand copper conductor cable as earth continuity wire drawn in conduit.

S&F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve CAT A

S&F of 63 Amp. TP MCB (10 KA) C Curve CAT A

S & F surface/Flush mounting 4ways TPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer in charge. CAT A

S&F of 32 Amp. four pole change over switch on 25mm x 25mm x 3mm angle iron frame, including the cost of labour, T&P, painting and other material required for proper completion of the work as per direction and satisfaction of Engineer in charge.

Supply & fixing of wall roof type service bracket of 50 mm dia 4 Meter long fabricated from class "B" G.I. pipe complete with two bends, sockets, wall clamps. 7/3.15 mm G.I. stay wire, stay insulators etc. complete in all respect.

Erection and testing of ceiling fan and regulator etc.excluding supply of down rod, complete in all respect.

Supply and fixing of fan hook fabricated from M.S. rod for ceiling fan each.

Supply and fixing of power plug with 15A/250 volt flush type switch and 5 pin 15A/250V flush type universal socket in suitable M.S. box of 175mm x 100mm x 50mm size with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer.

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.

Supply and burying of 600mm x 600mm x 6mm G.I. plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe and funnel for watering and one earthing lead of one no. 8 to 10 SWG GI wire in 15mm dia G.I. pipe up to switch board (from appron to switch board the cost of G.I. pipe and G.I. wire will be extra) 30cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing (This will apply for earthing of poles also).

Supply and fixing of electronic fan regulator 120-280 V. ISI marked, on the existing switch board including making connections, required material, labour T&P etc. for proper completion of work to the satisfaction of Engineer in charge of work.

Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 30Watt. to 40 Watt. Confirming to IP 66 protection complete in all respect. CAT-AAA

Supply and fixing of call bell of approved make on polished MDFEG/ Teak ply board including making connections etc. complete in all respect.

S R CONTRACTORS (BID ID -4923105)

Arvind Kumar (BID ID -4919547)

Sharma Enterprises (BID ID -4915114)

ABHISHEK ASSOCIATES (BID ID -4905292)

Chattar Singh Construction Co. Noida (BID ID -4919503)