REPAIR TO PATH BOUNDARY WALL HARD STANDING DRAIN ETC INCLUDING CERTAIN MISC BR WORKS IN AREA OF AGE BR I UNDER GE AF SUBROTO PARK DELHI CANTT 10

Amount

Demolition of cement concrete in ground floor and paving n exc 15 cm thickness (Below or above ground level) and removing the demolished material away from site outside defence land complete all as specified and as directed by Engr-in-Charge.

Demolition of Stone slabs and tiles laid in cement mortar of any description or thickness in floors, aprons etc. and removing the demolished stone slabs & tiles outside defence land complete all as specified and as directed by Engr-in-Charge.

M&L for 75mm thk cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in sub base for floors finished even and fair to receive floor finish over it complete all as specified and as directed by Engr-in-Charge.

M&L for sand filling under floor or in foundation including watering & consolidation complete all as specified and as directed by Engineer-in-Charge.

S&F precast rubber moulded machine pressed PCC interlocking paver block 80 mm thickness, M-35 grade of any shape and size confirming to IS -15658-2006 with grey cement as approved complete all as specified and as directed by Engr-in-Charge.

M&L for cement concrete 1:2:4 type B-1(using 20mm graded aggregate), 40mm thick finished even and smooth without using extra cement with wire markings to receive floor finish over it complete all as specified and as directed by Engr-in-Charge.

M & L for 20 – 22 mm thick designers coloured glossy finished cement concrete floor tiles of size (30x30cm) or next higher size and design as approved set and jointed in neat cement slurry laid over and including 15mm thick screed bed or bedding layer of mortar in CM 1 : 6 finished even and smooth with wire markings to receive tile over it complete all as specified and as directed by Engr-in-Charge.

Dismantling plain or coruggated steel sheetings, any guage, thickness, pattern on roof or wall cladding and removing away from site outside MoD land complete all as specified and as directed by Engr-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for and removing away from site etc complete all as specified and as directed by Engr-in-Charge.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated/ style pattern steel sheet 0.50mm thick of any colour having tensile strength of 550MPa as in roof covering / cladding to walls fixed to steel frame with self tapping screw using rubber washer in roofs complete all as specified and as directed by Engr-in-Charge.charge.

S & F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engr-in-Charge.

S&F rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails or guides for sliding doors, fixed with angle cleats or other connecting plates using Fe-290 (Gde-E 165) grade steel complete all as specified and as directed by Engr-in-Charge.

M & L for structural steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing including distance pieces, cleats etc using Fe-290 (Gde E165) quality A complete all as specified and as directed by Engr-in-Charge.

M&L for framed work as in doors or gates of angle or other section with gusset plates, with Fe-290 (Gde E165) quality A complete all as specified., drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing complete all as specified and as directed by Engr-in-Charge.

M&L two coats synthetic enamel paint over a coat of red oxide primer on steel surfaces of any description not otherwise described over 10 cm width or girth including preparation of surfaces complete all as specified and as directed by Engr-in-Charge.

S&F in repairs precast cement concrete louvers and jallies , 35 mm thick including all mouldings in type B-0 1:2:4 (using 12.5 mm graded stone aggregate) set in cement mortar 1: 6 complete all as specified and as directed by Engr-in-Charge.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc and removing demolished material away from site outside MoD land complete all as specified and as directed by Engr-in-Charge.

M&L for brick work with sub class B bricks of old size built in cement mortar 1:4 straight or curved on plan exceeding 6m mean radius complete all as specified and as directed by Engr-in-Charge.

M&L for PCC 1:4:8 type D-2 using (40 mm graded stone agg) as in foundation filling and mass concrete base complete all as specified and as directed by Engr-in-charge.

Taking down cement plaster of any description on brick or concrete surfaces of walls or ceiling etc incl. Raking out joints , hacking for key and scrubbing down with water complete all as specified and as directed by Engr-in-Charge.

M&L for 15 mm thick cement plaster in cement mortar 1:4 on concrete or brick surfaces and finished even and smooth w/o using extra cement complete all as specified and as directed by Engr-in-Charge.

M & L for PCC 1 : 2 : 4 type B - 2 (using 12.5 mm graded stone aggregate) in coping benching, plinth course, bed plates and the like including weathering, slightly rounded or chambered angles and throating complete all as specified and as directed by Engr-in-Charge.

S&F in repair factory made SFRC manhole/drain cover (Grade M-25) heavy duty cover slab in rectangular shape of size as required 80 mm thick incl MS sheet 2 mm thick and 80 mm wide all around the cover complete all as specified and as directed by Engr-in-Charge.

Vishal Enterprises

Ashish Sehgal and Co.

JAIPAL and BROS

Hindustan Co.Co

Mahesh Enterprises

J D ENTERPRISES

M/s. Kansal Construction Co.

R C Sharma and Co