INTERIOR WORKS FOR SHOWROOM CUM INTERPRETATION CENTRE AT GOVERNMENT WOOLLEN MILLS BEMINA SRINAGAR JK

Amount

Civil Works The total floor area (interior) is 490 sqm

P / L 50mm average thickness Plain Cement Concrete 1:2:4 (1 cement : 2 coarse sand : 4 aggregate, 20mm and down gauge) , tamped, spaded, trowelled and smooth finish (Levelling Course & Counters etc.)

P / L Half brick (115mm thick) partition walls with light weight aerated foam concrete blocks, good quality approved bricks in cement mortar 1:4 (1cement : 4 coarse sand) including 2 nos. of 6mm dia. M.S. round bars at every IVth course, including scaffolding, curing, rubbing the surface, racking out the joints etc., complete as directed and specified for walls, platform supports etc. at all levels as per design

P / A Water-proofing treatment to raw RCC slab/Floor surface which includes cement plaster in 1:3 with water proofing compound (Tapecrete CICO make P 151/ Dr Fixit/ STP or equivalent) finished with neat cement coat, applied as per manufacturer guidelines, as per site/as directed

P / A 12-15mm thick plaster in cement mortar 1:4 to all types of RCC / brick work (small or big) surfaces including , wall tops, jambs and cills etc. in line level and plumb, including smooth cement finish, including providing necessary grooves

Internal Glazing

P / F Cabin Framed Glazing, Matte melamine polished 100x50mm section size fully seasoned Ivory Teakwood framework with 10mm thk. Toughened glass + Traditional Kashmir wooden Pinjarkari Jaali work(star pattern Type 1) made out of 12mm x12mm deodar members placed at 35mm c/c both sides.The members of the jaali are held in positioned with the help of lap joints without using nails glue etc and is inserted in the teakwood frame.The frame is anchored to floor & false ceiling, as per detail as per drawing no. E-006 complete in all respects.

Metal Works

P / F MS Fabrication (NON STRUCTURAL WORK ONLY) for support structures, door/ windows with related hardware, & various framework/ catwalk supports etc. with MS Hot rolled tubes/ ISMC/ ISMB/ ISA/ solid square/round bar/ sections etc., rate to include fabrication, grinding & applying 2 or more coats of red oxide primer & enamel paint as per approved shade & make, as per manufacturer specifications, as per design as directed by the engineer in charge

Wall Treatments (Plaster, Painting & Polishing) & External Façade

P / A 8-12mm thk. plaster of paris (super fine quality) punning/ plaster on walls, columns etc., including scraping & hacking the existing finished surfaces and applying plaster of paris, making in proper grooves, line and levels/ plumb

P / A Fire retardant Paint( NAVAIR make FLAME PROOF ENAMEL PAINT FIRERETAR–FR–881 or equivalent), on all teakwood/ secondary hardwood framework or as mentioned by site engineer/ architect, applied as per manufacturer's specifications

P / A 3 or more coats of acrylic emulsion paint(Asian Paints/Nerolac/Berger or equivalent)in colour and shade approved by the Engineer in Charge, Roller finish, to all walls, ceiling / plastered surfaces, applied evenly to produce uniform even surface to approved finish as per design inclusive of the wall surface prepared with two coats of primer, wall putty if required , applied as per manufacturer's specifications complete in all respects.

P / A of Texture Paint (Asian Paints Royale Play Drizzle Top coat Pallid Bloom M318 or equivalent), inclusive of the wall surface prepared with two coats of primer, wall putty if required , applied applied as per manufacturer's specifications

P / A 2 or more coats of enamel paint (Asian Paints/Nerolac/Berger or equivalent), applied as per manufacturer's specifications complete in all respects.The colour and shade will be duly approved by the Engineer in Charge.

S / I Wallpaper on wall/ partition, Nilaya make Pattern Book Colour Library II Crème colour W077D4NOY75, installed on smooth POP wall/ Partition, installed as per manufacturer's specifications

P / A of Exterior grade weather proofwater, dust and water repellant PU enhanced finish modified acrylic with silicon additives emulsion paint (Asian paint Apex Ultima/Berger Weather Coat long Life or equivalent) in colour and shade approved by the Engineer in Charge on all perimeter of buildings inclusive of the wall surface prepared with two coats of primer, two coats of wall putty and touch up putty if required, applied as per manufacturer's specifications complete as per design.

P / A of Exterior Façade Wall Cladding - Terracotta Antique (230x50x14mm) Brick Tile, Jindal Mechno make on front facade installed with 6mm thk. PVC spacer with cement grout filling with exterior grade matte PU coating(3M make or equivalent), as per detail drawing E-001 (flat elevation area to be measured for rates) complete in all respects as directed by the Engineer in Charge.

P / F of 75x50mm section size fully seasoned Ivory Teakwood profile, 3M make exterior grade matte PU coating colour tone matched to Veneer used on front façade, as per detail drawing E-001

P / A 3M make exterior grade matte PU coating on façade window & door wooden framework, colour tone matched to Veneer used on front façade

Ceiling Elements The total floor area (interior) is 490 sqm

P / F 12.5mm thk. Gypsum board false ceiling, including providing and fixing G.I. angle of 25x25x0.55mm thick along perimeter of the ceiling, fixed to brick wall/ partition with the help of Nylon sleeves and screws at 610mm c/c. The main section of size 25x40x0.8mm thk fixed with the help of a level adjuster made of zinc alloy 50x25 mm as per drawings from the soffit of slab at 1220mm c/c with MS Flat 25x3mm thk fixed to soffit with G.I. cleat and dash fasteners. Ceiling section of 0.56 thickness having knurled web of 40 mm and 2 equal flanges of 35 mm with lips of 8.5mm are then fixed to the main section with the help of connection clips/ screws & in the direction perpendicular to the main section at 375 mm c/c, including taping, rate to include all pelmets / coves etc. as per design (flat plan area to be measured for rates)

Extra for providing & fixing 12mm thk. MR grade plywood + Matte melamine polished 4mm overall thickness water resistant veneer with 0.5mm thk. Wood face top layer (Archidply make Longhi Veneer or equivalent) + Traditional Kashmir wooden Pinjarkari Jaali work (star pattern type 1) on top of veneer cladding in place of 12.5mm thk gypsum board on above mentioned false ceiling as per Ceiling Finishes Plan P-011 Detail-Z & Detail-Y.The pinjara is made out of 12mm x12mm deodar members placed at 35mm c/c both sides.The members of the jaali are held in positioned with the help of lap joints without using nails glue etc complete in all respects.

Extra for providing & fixing 12mm thk. MR grade plywood + Matte melamine polished 4mm overall thickness water resistant veneer with 0.5mm thk. Wood face top layer (Archidply make Longhi Veneer or equivalent) + Traditional Kashmir wooden Pinjrakari Jaali work(star pattern type 1) on top of veneer cladding, in place of 12.5mm thk gypsum board on above mentioned false ceiling taper pelmet, as per Ceiling Finishes Plan P-011 Detail-W.The pinjara is made out of 12mm x12mm deodar members placed at 35mm c/c both sides.The members of the jaali are held in positioned with the help of lap joints without using nails glue etc complete in all respects.

P / F Rolling Shutter Boxing, 50x50mm fully seasoned secondary hardwood framework cladded with 12mm thk. BWP Plywood, single side laminated, colour matched to false ceiling paint, fixed / hinged, including all hardware, piano hinges, Hafele make concealed Lever Action Flush Bolt 19x200mm, Nickel Matt finish, article no. 911.62.571, for openable panel, neat grooves, including vertical face cladding with Matte melamine polished 4mm thk. Archidply make Longhi Veneer etc., complete as per design (flat plan area to be measured for rates)

Flooring & Wall Tiling The total floor area (interior) is 490 sqm

P / L of 600x600mm Double charged Vitrified Tile flooring, make in colour and shade approved by the Engineer in Charge (Qutone Opal Gris/Nitco/Johnson or equivalent), laid in diamond pattern with 1:4 cement mortar, with 3mm thk. PVC spacer, the gaps of joints to be filled with epoxy grout filling (MYK Laticrete make 88 Silver Shadow(I), /Ardex or equivalent) including 100mm skirting on full perimeter of site, as per flooring plan P-003 complete in all repects.

P / L of 300x600mm Double Charged Vitrified Tile flooring in colour and shade approved by the engineer in charge (Nitco make Geometry Grey/ Quotone/ Johnson or equivalent), laid with 1:4 cement mortar, with 3mm thk. PVC spacer he gaps of joints to be filled with epoxy grout filling( MYK Laticrete 88 Silver Shadow (I)/Ardex or equivalent), as per flooring plan P-003 complete in all respect.

P / L of 600x600mm 16mm thk. Prepolished Natural Cera Grey Granite stone (base rate 1750/- per Sqm) flooring, laid with 1:4 cement mortar, with 3mm thk. PVC spacer the gaps of joints to be filled with epoxy grout filling( MYK Laticrete 91 Slate Grey (I)/ Ardex or equivalent), on external & internal staircases, ramps, including edge polishing/ chamfering, as per flooring plan P-003 complete in all repects

P / L 440x440mm Designer flooring with following specifications tiles from Sidrons, laid with 1:4 cement mortar, without PVC spacer, as per flooring plan P-003 complete in all respects Orlydeco Esquina Tile Orlydeco Printed Tile Orlydeco Cenefa Tile

P / L of 600x600mm Double Charged Vitrified Tile flooring in colour and Shade approved by the Engineer in Charge(Johnson Endura Grey/Quotone/Nitco or equivalent), laid with 1:4 cement mortar, with 3mm thk. PVC spacer the gaps of joints to be filled with epoxy grout filling( MYK Laticrete 91 Slate Grey (I)/Ardex or equivalent), as per flooring plan Attic Floor P-021 complete in all respects.

P / F of 300x200mm Glazed Ceramic Tile cladding on Pantry walls, White colour, (Kajaria/Johnson/Nitco or equivalent make), on Pantry walls, installed with 1:2 cement mortar, with 3mm thk. PVC spacer, the gaps of joints to be filled with epoxy grout filling(MYK Laticrete 22 Midnight Black (I)/Ardex or equivalent), as per drawing no. E-012 complete in all respects.

P / F 300x600mm Wall tile cladding in colour and shade approved by the engineer in charge (Nitco Geometry Grey/Johnson/Kajaria or equivalent) , on toilet walls, installed with 1:2 cement mortar, with 3mm thk. PVC spacer the gaps of joints to be filled with epoxy grout filling(MYK Laticrete 88 Silver Shadow (I)/Ardex or equivalent), as per drawing no. E-014 complete in all respects.

P / F 300x600mm Wall tile cladding in colour and shade approved by the Engineer in Charge (Nitco Geometry Blue Décor/Johnson/Kajaria or equivalent), on toilet walls, installed with 1:2 cement mortar, with 3mm thk. PVC spacers, the gaps of joints to be filled with epoxy grout filling(MYK Laticrete 88 Silver Shadow (I)/Ardex or equivalent), as per drawing no. E-014complete in all respects.

P / L of 300x600mm Wall tile cladding in colour and shade approved by the Engineer in Charge (Nitco Ariste Beige LT (S)/Johnson/Kajaria or equivalent), installed with 1:2 cement mortar, with 3mm thk. PVC spacer the gaps of joints to be filled with epoxy grout filling (MYK Laticrete 23 Antique White (I)/Ardex or equivalent), as per drawing no. E-013complete in all repects.

P / L of 300x600mm Wall tile cladding in colour and shade approved by the Engineer in Charge(Nitco Berkene Grey Décor (M)/ Johnson/Kajaria or equivalent), installed with 1:2 cement mortar, with 3mm thk. PVC spacer & epoxy grout filling (MYK Laticrete make 23 Antique White (I)/ Ardex or equivalent), as per drawing no. E-013

P / F 12mm thk. Pre-polished natural Grey William marble stone including edge polishing on 100mm high skirting flushed to wall & partitions as per drawing no. P 003 complete in all repects

P / L of 12x12mm Solid 304 grade SS inlay between tile transitions, as per flooring plan P-003 complete in all repects as directed by the Engineer in Charge.

Doors & Windows The total floor area (interior) is 490 sqm

P / F 900x2400mm Meeting & Consultation Room Door, 50x100mm section size fully seasoned Ivory Teakwood door frame in Matte melamine polish (polish color match to veneer), with 100x40mm section size framed glass door with 8mm thk. Toughened glass, as per drawing no. D 06 (including all material, hardware & finishes as mentioned in drawings)

P / F 2400mm height & following width Single Leaf Door, 35mm thk. Flush door with glass vision panel with Matte melamine polished 4mm thk. Archidply make Longhi Veneer on both sides, (including all material, hardware & finishes as mentioned in drawings)

1200mm width for Staircase Door, as per drawing no. D 03

750mm width for Pantry Door, as per drawing no. D 05

900mm width for Toilet Entry Door, as per drawing no. D 11

P / F 2100mm height & following width Single Leaf Door, 35mm thk. Flush door with glass vision panel with Matte melamine polished 4mm overall thickness water resistant veneer with 0.5mm thk. Wood face top layer (Archidply make Longhi Veneer or equivalent) on both sides, (including all material, hardware & finishes as mentioned in drawings)

900mm width for Manager Room Door, as per drawing no. D 08

1000mm width for Manager Room Door, as per drawing no. D 09

P / F 1500x2100mm Double Leaf Store Room Door, 35mm thk. Flush door with glass vision panel with Matte melamine polished 4mm overall thickness water resistant veneer with 0.5mm thk. Wood face top layer (Archidply make Longhi Veneer or equivalent) on both sides, as per drawing no. D 10 (including all material, hardware & finishes as mentioned in drawings)

P / F 2400mm & following width Single Leaf Door, 35mm thk. Flush door panel with 4mm overall thickness water resistant veneer with 0.5mm thk. Wood face top layer (Archidply make Longhi Veneer or equivalent) on both sides (Matte melamine polish on outer face & matte PU polish on inner face) (including all material, hardware & finishes as mentioned in drawings)

900mm width for Toilet, as per drawing no. D 04

750mm width for Trial Room, as per drawing no. D 07

P / F Matte melamine polished 100x50mm section size fully seasoned Ivory Teakwood door frame only for Trail Room Entrance

Partitions & Joinery Elements The total floor area (interior) is 490 sqm

P / F of 3150x2400x500mm depth (overall size) Loose Joinery Item "Ladies Coat Display Unit", as per drawing no. F-004, 006 & 007, including all material, signage letters, hardware & finishes as mentioned in drawing (excluding any light fixture)

P / F of 3150x2400x500mm depth (overall size) Loose Joinery Item "Men's Coat & Waist Coat Display Unit", as per drawing no. F-005, 006 & 007, including all material, signage letters, hardware & finishes as mentioned in drawing (excluding any light fixture)

P / F of 1734x2400x400mm depth (overall size) Loose Joinery Item "Silk Yardage Fabric Display Unit", as per drawing no. F-002, including all material, signage letters, hardware & finishes as mentioned in drawing (excluding any light fixture)

P / F of 1359x2400x400mm depth (overall size) Loose Joinery Item "Silk Yardage Fabric Display Unit", as per drawing no. F-003, including all material, signage letters, hardware & finishes as mentioned in drawing (excluding any light fixture)

P / F of 3720x2400x400mm depth (overall size) Loose Joinery Item "Worsted Suit Length Fabric Display Unit", as per drawing no. F-001, including all material, signage letters, hardware & finishes as mentioned in drawing (excluding any light fixture)

P / F of 2400x2400x500mm depth (overall size) Loose Joinery Item "Ladies Suit Silk Display Unit", as per drawing no. F-008, including all material, signage letters, hardware & finishes as mentioned in drawing (excluding any light fixture)

P / F of 2400x2400x500mm depth (overall size) Loose Joinery Item "Ladies Suit /Stoles & Dupatta/Blanket Display Unit", as per drawing no. F-009, including all material, signage letters, hardware & finishes as mentioned in drawing (excluding any light fixture)

P / F of 1350x1200x500mm depth (overall size) Loose Joinery Item "Saree / Men's Coat Display Unit", as per drawing no. F-015 & 019, including all material, signage letters, hardware & finishes as mentioned in drawing (excluding any light fixture)

P / F of 1190x2000x75mm depth (overall size) Fixed Joinery Item "Phiran Display Unit", as per drawing no. F-020 & 019, including all material, signage letters, hardware & finishes as mentioned in drawing (excluding any light fixture)

P / F of 1500x900x750mm high (overall size) Loose Joinery Item "Counter 1", as per drawing no. F-012 & 014 including all material, signage letters, hardware & finishes as mentioned in drawing (excluding any light fixture)

P / F of 1500x900x750mm high (overall size) Loose Joinery Item "Counter 2", as per drawing no. F-013 & 014 including all material, signage letters, hardware & finishes as mentioned in drawing (excluding any light fixture)

P / F of 2550+2250+1650mm length x 1050mm height x 750 & 600mm depth (overall size) respectively "U" shaped Loose Joinery Item "Reception Counter", as per drawing no. F-010 & 011, including all material, signage letters, hardware & finishes as mentioned in drawing (excluding any light fixture)

P / F of 1200x500x750mm high (overall size) Loose Joinery Item "Raw Material Display Table", as per drawing no. F-016 & 019, including all material, signage letters, hardware & finishes as mentioned in drawing (excluding any light fixture)

P / F of 900x450x430mm high (overall size) Loose Joinery Item "Bench Seating-1", as per drawing no. F-017 & 019, including all material, signage letters, hardware & finishes as mentioned in drawing (excluding any light fixture)

P / F of 1050x450x450mm high (overall size) Loose Joinery Item "Bench Seating-2", as per drawing no. F-018 & 019, including all material, signage letters, hardware & finishes as mentioned in drawing (excluding any light fixture)

P / F of 3995x550x3150mm high (overall size) Fixed Joinery Item "Conference Room TV Console", as per drawing no. F-020, including all material, signage letters, hardware & finishes as mentioned in drawing (excluding any light fixture)

P / F of 2100x900x750mm high (overall size) Loose Joinery Item "Conference Table", as per drawing no. F-022, including all material, signage letters, Innofit electric box, hardware & finishes as mentioned in drawing

P / F of 1050x180x2950mm high (overall size) Fixed Joinery Item "Spindle Display ", as per drawing no. F-024, including all material, signage letters, hardware & finishes as mentioned in drawing (excluding any light fixture)

P / F of 4950x700x3886mm high (overall size) Fixed Joinery Item "Consultation Studio Storage Unit", as per drawing no. F-023, including all material, hardware & finishes as mentioned in drawing

P / F of 2268x450x750mm high (overall size) Fixed Joinery Item "Manager Cabin Back Counter", as per drawing no. F-031, including all material, signage letters, hardware & finishes as mentioned in drawing (excluding any light fixture)

P / F of the following sizes Loose Joinery Item "Mannequin Podium Detail", including all material, hardware & finishes as mentioned in drawing

Mannequin Podium -1 600x600x200mm as per drawing no. F-025

Mannequin Podium -2 1800x600x200mm as per drawing no. F-026

Mannequin Podium -3 2975x908x200mm as per drawing no. F-027

Mannequin Podium -4 3600x600x200mm as per drawing no. F-028

P / F 1200x900mm high overall size Soft Board Panel, Matte melamine polished 50x25mm fully seasoned Ivory Teakwood framework with 12mm thk. Soft board with 8mm thk. Backing plywood, as per detail DET. 005

P / F Wall Panelling, fabricated from 20x40mm fully seasoned secondary hardwood framework & cladded with 19mm MR plywood + Matte melamine polished 4mm overall thickness water resistant veneer with 0.5mm thk. Wood face top layer (Archidply make Longhi Veneer or equivalent), as per drawing (flat elevation area to be measured for rates), including all material, hardware & finishes as mentioned in drawing.

Extra for providing & fixing 4mm overall thickness water resistant veneer with 0.5mm thk. Wood face top layer (Archidply make Longhi Veneer or equivalent) on two sides & Matte melamine polished

Extra for providing & fixing 4mm thk. MDF in place of Veneer on above mentioned partition

P / F Column cladding, 20x40mm fully seasoned secondary hardwood framework cladded with 19mm thk. MR grade plywood & finished with 4mm overall thickness water resistant veneer with 0.5mm thk. Wood face top layer (Archidply make Longhi Veneer or equivalent) on two sides & Matte melamine polished 100x100x25mm thk. fully seasoned Ivory Teakwood "L" cladding with 5mm thk. Hard silvered looking mirror on two sides, with following additional as per drawing no. DET-003 (Flat elevation area to be measured for rates)

P / F of Graphic panelling, fabricated from 20x40mm fully seasoned secondary hardwood framework finished with 12mm thk. MR grade plywood with 0.8mm thk. Off white colour balancing laminate on front face only (excluding light fitting & vinyl graphic), as per drawing no. E 003 & DET-002

P / F of following size Matte melamine polished Wooden decorative frames with 5mm thk. Hard silvered mirror & 6mm thk. backing plywood, 50x35mm section size fully seasoned Ivory Teakwood framework, as per drawing no. DET-006, 007, 010, including all material, hardware & finishes as mentioned in drawing

500x1650mm (overall size)

900x2100mm (overall size)

750x2100mm (overall size)

1204x2300mm (overall size)

962x2300mm (overall size)

942x2300mm (overall size)

1076x2300mm (overall size)

P / F 122mm thk. Standard Double Board Gypsum Partition with 70mm GI Stud & 24 Kg/Cum Glass Wool filling, as per manufacturer guideline (India Gypsum/ Lafarge or equivalent make)

Extra for providing & fixing 8mm thk. MR grade plywood + Matte melamine polished 4mm overall thickness water resistant veneer with 0.5mm thk. Wood face top layer (Archidply make Longhi Veneer or equivalent) in place of secondary layer of 12.5mm thk gypsum board on above mentioned partition

P / F 50x75mm section size Matte melamine polished fully seasoned Ivory Teakwood framework partition securely anchored to false ceiling & floor, as per drawing no. E 004 , (Flat elevation area to be measured for rates) with the following items

600x600mm Grid with Traditional Kashmir wooden Pinjrakari work(star pattern type-1) & (hexagon pattern type-2) (as per artwork) without backing ply.The pinjara is made out of 12mm x12mm deodar members placed at 35mm c/c both sides.The members of the jaali are held in positioned with the help of lap joints without using nails glue etc complete in all respects.

600x600mm Grid with Traditional Kashmir wooden Pinjrakari work (star pattern type-1) &(hexagon pattern type-2) (as per artwork) with 19mm thk. MR plywood backing ply + 4mm overall thickness water resistant veneer with 0.5mm thk. Wood face top layer (Archidply make Longhi Veneer or equivalent) finished in Matte melamine polished.The pinjara is made out of 12mm x12mm deodar members placed at 35mm c/c both sides.The members of the jaali are held in positioned with the help of lap joints without using nails glue etc complete in all respects.

Woolen Fabric Tile as per app. Sample fixed on with 19mm thk. MR plywood backing ply + 4mm overall thickness water resistant veneer with 0.5mm thk. Wood face top layer (Archidply make Longhi Veneer or equivalent) finished in Matte melamine polished with magnetic catchers on MS Strips

19mm thk. MR plywood backing ply + 4mm overall thickness water resistant veneer with 0.5mm thk. Wood face top layer (Archidply make Longhi Veneer or equivalent) finished in Matte melamine polished

19mm thk. MR grade plywood +5mm THK. Black Lacquered glass (Saint Gobain/Modi float or equivalent)

600x600x100mm & 20mm thk. Wooden shelves fabricated with Matte melamine polished fully seasoned Ivory Teakwood framework

P / F Wainscot Wall Panelling, fabricated from 20x40mm fully seasoned secondary hardwood framework & cladded with 12mm MR plywood + 19mm MR plywood + Matte melamine polished 4mm overall thickness water resistant veneer with 0.5mm thk. Wood face top layer (Archidply make Longhi Veneer or equivalent), as per drawing no. DET-008 (flat elevation area to be measured for rates), including all material, hardware & finishes as mentioned in drawing.

P / F of Seasoned fully seasoned secondary hardwood (Marandi wood) for various GI frame reinforcement/ above false ceiling framework etc., as required at site

P / F Overhead storage Unit in pantry, in 19mm thk. Marine plywood, 400mm deep with backing plywood with all side laminated shutters, shelves, Hettich/Hafele or equivalent make soft closing spring loaded hinges and furniture locks & 3mm thk. melamine polished hardwood edging on all exposed edges of plywood, all internal surfaces laminate finish, as per detail as per drawing no. DET-004

P / F Under counter storage units in pantry, in 19mm thk. Marine plywood, 550mm deep with backing plywood with all side laminated shutters, with shelves, Hettich/Hafele or equivalent make soft closing spring loaded hinges, SS handles and furniture locks & 3mm thk. melamine polished hardwood edging on all exposed edges of comm. board – all internal surfaces laminate finish, drawers to have soft closing Hettich make telescopic drawer slides, including 16mm thk. Black Granite on counter top, as per detail as per drawing no. DET-004

P / F Washbasin counters, fabricated from 32x32x2.5mm thk. MS square pipe framework securely anchored to brickwall and finished with 16mm thk. Pre-polished Grey William natural marble including edge polishing and chamfering & 300mm height vertical pelmet

1500x600mm Plan size, as per drawing no. E-013 & DET-009

1454x600mm Plan size, as per drawing no. E-014 & DET-009

P / F 226mm width & 16mm thk. Pre-polished Grey William natural marble including edge polishing on 1200mm high Toilet Ledge wall

P / F 1150x400x2400mmm Electrical DB boxing, fabricated from 19mm thk. MR plywood & finished with Matte melamine polished 4mm overall thickness water resistant veneer with 0.5mm thk. Wood face top layer (Archidply make Longhi Veneer or equivalent) & fully seasoned Ivory Teakwood louvers, as per drawing no. F-028 (flat elevation area to be measured for rates)

P / F 1350x550x2400mmm Janitor-1 boxing, fabricated from 19mm thk. MR plywood & finished with Matte melamine polished 4mm overall thickness water resistant veneer with 0.5mm thk. Wood face top layer (Archidply make Longhi Veneer or equivalent) & fully seasoned Ivory Teakwood louvers, as per drawing no. F-029 (flat elevation area to be measured for rates)

P / F 799x550x2400mmm Janitor-2 DB boxing, fabricated from 19mm thk. MR plywood & finished with Matte melamine polished 4mm overall thickness water resistant veneer with 0.5mm thk. Wood face top layer (Archidply make Longhi Veneer or equivalent) & fully seasoned Ivory Teakwood louvers, as per drawing no. F-030 (flat elevation area to be measured for rates)

P / F 1400x650x2100mmm Server Room Storage, fabricated from 19mm thk. MR plywood & finished with 1mm thk. Laminate matched to Veneer (flat elevation area to be measured for rates)

Miscellaneous Items

P / F of Mac Décor make Honeycell Cellular blinds inclusive of all recommended accessories in approved colour and shade as approved by the engineer in charge (Base rate 3500/- per Sqm)

P / F of 20x20mm, 2400mm long SS 304 grade Brush finish Edge Protection angles, fixed to partition/ wall corners with PVC anchor fasteners, as per detail/ as directed by site engineer/ architect as per drawing no. E-013 & E-014

S / I of Hafele make 76mm diameter Unisex Washroom Symbol SS Plate, Article no. 987.10.000

S / I of Hafele make 76mm diameter Male Washroom Symbol SS Plate, Article no. 987.10.100

S / I of Hafele make 76mm diameter Female Washroom Symbol SS Plate, Article no. 987.10.200

S / I of Hafele make Floor mounted Door Stopper, Article no. 937.55.140, SS matte finish

S / I of Hafele make Wall mounted Door Stopper, Article no. 937.13.530, SS matte finish

S / I of Remote operated call bell

S / I of Panasonic make KX-TSC62SXB Corded Telephone set

S / I / T / C of Versa Manual type Horizontal water heater, 40 Ltrs capacity (Jaquar make), VRM-WHT-H040

P / F Hard silvered looking mirror with 12mm thk. BWP grade plywood & 20x40mm fully seasoned secondary hardwood framework with cove pelmet, as per drawing/ detail

1500x900x5mm thk.

1379x900x5mm thk.

S / I of 25x25mm SS-304 grade Square pipe fixed to false ceiling for fabric display (excluding fabric cost)

S / I / T / C of Crompton make Fizzair (Hi speed) Wall mounted fan, Sweep - 300 mm, Color - Opal White with all accessories complete in all respect

P / F of approved make steel rolling shutter conforming to IS 6248-1979, steel laths fabricated from 1.20mm thick cold rolled steel with convex corrugation with pressed side guides and bottom rail (both made out of 3 mm thick plate) brackets, door suspension shaft, high tension coil type rolling spring, (made out of best spring steel wire), best quality self aligning type double row ball bearing,top housing box / hood made out of 1.00 mm thick sheet, brack plates fabricated out of minimum 3.00 mm thick sheet, locking arrangement for padlocks on both sides, pulling hold, handles, including grouting, filling around frame, one coat of zinc chromate primer etc. The gear operated shutters are to provided with reduction gear operated by mechanical device with chain, crank, shaft and handle for operation. The shutters will be finished by 2 coats of spray enamel paint applied of after installation, complete in all respect, as per drawing and as directed by the engineer in charge

S / I of 1000mm high SS 304 grade Railing for Outdoor area, with 50mm diameter Balustrade with 38mm diamter handrail with 16mm diameter 3 nos. equally spaced Midrails, including additional 38mm diameter SS handrail for wheelchair support with all necessary hardware/ anchor fasteners for installation, complete in all respect

S / I of 1000mm high SS 304 grade Railing for Outdoor area, with 50mm diameter Balustrade with 38mm diamter handrail with 16mm diameter 3 nos. equally spaced Midrails with all necessary hardware/ anchor fasteners for installation, complete in all respect

S / I of 1145x1550mm Cubicle for toilets Greenlam/ Merino Besco make as per app. Sample, including all SS 304 grade hardware, installed as per manufacturer's specifications

S / I of 1200x600x2000mm high Slotted Angle Metal Rack for Store Room, fabricated from 1.6mm thk. MS CRCA sheet with enamel paint, as per approved sample

Signage, Graphics & Frosting Film The total floor area (interior) is 490 sqm

P / F of flat laser cut letters for signage for main entry partition wall,letters to be fabricated(laser cut) from stainless steel sheet of approx size 775mmx 315 mm x 6 mm thk. complete in all respects as per given art work.The cost is inclusive of fixing of the letters with suitable adhesive complete in all repects as directed engineer in charge.

P / F of flat laser cut black powder coated letters for signage for main entry partition wall,letters to be fabricated(laser cut) from MS sheet of approx size 925mmx 534 mm x 6 mm thk. complete in all respects as per given art work.The cost is inclusive of fixing of the letters with suitable adhesive complete in all repects as directed engineer in charge.

P / F of 250x200mm high & 6mm thk. SS flat laser cut letters (as per artwork) “BILLING” signage (near reception area), adhesive bonded to wall/ partition surface complete in all respects as directed by the site engineer in charge.

P / F 250x200mm high & 6mm thk. SS flat laser cut letters (as per artwork) “CHANGING ROOM” signage (near reception area), adhesive bonded to wall/ partition surface complete in all respects as directed by the site engineer in charge.

S / I of following size with black PVC picture frames with 3mm thk. non reflective glass & artwork to be printed on art card, as per artwork/ pictures

600x900mm (overall size)

600x750mm (overall size)

600x300mm (overall size)

415x300mm (overall size)

300x300mm (overall size)

S / I of 3M make 180C media Eco-solvent printed as per given design/ artwork, pasted on smooth wall/ gypsum partition.The work to be done by 3M authorised converter as directed by the engineer in charge.

S / I of 3M Anti Graffiti 8520 Matte finish film over 180C media, to be done by 3M authorised converter, as per design/ artwork as directed by the engineer in charge.

P / F 3M Scotchcal 7725SE-314 Dusted Crystal (acid etched look) electrocut graphic film as per given design complete in all respects as directed by the engineer in charge.

Sanitary Fixture & Fittings BOQ for JKIL Showroom/ Experience Center @ Bemina, Srinagar, J&K The total floor area (interior) is 490 sqm

S / I / T / C of following sanitary fixure/ fitting / accessories etc., complete in all respect

Basin Faucet (Jaquar DOM-JQR-ARI-CHR-39005B/Kohler pillar tap K-22538IN-4-CP or euivalent)

Counter Top Wash Basin (Jaquar OPS-WHT-15901N/Hindware- Catalogue no. : 91209/Kohler K-2764T-1-0 or equivalent)

Wall Hung WC with soft closing seat cover (Jaquar-FLS-WHT-5953SM/Hindware -Catalogue no. : 92538/Kohler-K-13945IN-S-0 or equivalent)

Health Faucet (Jaquar -ALD-CHR-565/Kolher K-12929IN-CP or equivalent)

Flush Plate (Jaquar- JCP-CHR-392415 /Geberit- actuator plate Sigma30 for dual flush/Kohler K-4177IN-2-MS1 or equivalent)

Toilet Paper Holder with folder (Jaquar -AKP-CHR-35753PS/Kohler K-5633IN-CP or equivalent

Liquid Soap Dispenser (Jaquar ACN-CHR-1137N/Euronics/Kohler K-10712D-CP or equivalent)

Urinal with automatic flushing sensor & fixing kit (Jaquar URS-WHT-13255+Sensotronic Sens Flushing Valve for Urinal with Complete Kit SNR-CHR-51097)/Sensomatic Sensor Urinal Hindware catalogue no: 60013/Kohler K-4915T-0 with integrated automatic flushing sensor)

Urinal Partition (Jaquar - 1110-US or equivalent) with necessary fixing hardware

Concealed Cistern Kit with wall mounting frame (Jaquar - JCS-WHT-2400FS/Geberit Sigma concealed cistern 12 cm, 6/3 litres or equivalent

600mm long SS 304 grade braided flexible connection pipes (Jaquar/ Marblo or equivalent)

Angular Stop Cock (Jaquar VGP-CHR-81053/Kohler K-R-45616IN-9-CP or equivalent)

Bottle Trap (with Internal Partition) 32mm Size with 250mm & 190mm Long Wall Connection Pipes & Wall Flange (Jaquar, ALD-CHR-769L 250X190/Kohler K-7314IN-CP or equivalent)

Waste coupling 32mm Size Half Thread with 80mm height (Jaquar, ALD-CHR-709/Kohler K-45433IN-CP or equivalent)

Double Coat Hook, (Jaquar ACN-CHR-1161N/ Kohler K-5635IN-CP or equivalent )

Hand Dryer, (JaquarHDR-SAP-M99ACS/Euronics or equivalent make)

Wall mounted Paper Towel Dispenser, (Jaquar PTD-SAP-DT0106CS/ Euronics or equivalent make)

2-way Bib Cock, (Jaquar FLR-CHR-5041N make or equivalent)

Air Freshener Dispenser, White colour finish, (Kimberly-Clark Professional AQUARIUS - 6994 with 4 nos. refill cartridges/Euronics or equivalent) complete in all respects

Kitchen sink, single Bowl stainless steel 304 grade Matte finish without drainboard over all size 470mmx420mm (Jayna Signature co SBF-02/Nirali or equivalent) complete in all respects as per directions

Sink Mixer, 1-Hole with Swinging Extended Spout (Table Mounted Model) with 450mm Long Braided Hoses (Jaquar FLR-CHR-5319NB/ Kohler K-10877IN-4-CP or equivalent )

Light Fixtures BOQ for JKIL Showroom/ Experience Center @ Bemina, Srinagar, J&K The total floor area (interior) is 490 sqm

Supply only of following Light Fixture/ fittings inclusive of luminaries with all required accessories, complete in all respect, as per site condition

LED Track lights made of diecast aluminium, complete with reflectors made of aluminium 99.98% pure with wide beam angles available with luminaire( Citizen / Bridgelux or equivalent) LED 20W COB, 4000K color temperature, and LED driverscomplete in all respects as directed by site engineer (Halomax -HX GS ECO LED/ANKUR -XTR - LED - 3954 20W 4000K TRACK SPOT WHITE FINISH SIZE:- DIA-75mm x LENGTH-165mm/WIPRO LD57-251-036-40-XX /PHILIPS ST27ITLED20/840 PSU-E NB 1C BK or equivalent)

1 Running meter length powder coated aluminium track for above mentioned light fixture (Halomax / ANKUR make XTR-SQ-IP/0194 TRACK 1MTR/WH/WIPRO XTS-5100 or equivalent)

Recess mounted Tiltable LED down lighter made of diecast aluminium with High quality aluminium reflector with light Source(luminaire) 9W COB LED, 4000K color temperature, with High power LED driver or (Halomax make HX9539/ANKUR make XRL - LED - 02003 9W COB 4000K WHITE WIPRO GILTZ LD98-131-038-40-XX/PHILIPS RS 140B LED6-32/827 PSR PI6 ALU or equivalent)

Recess mounted Tiltable LED down lighter made of diecast aluminium with High quality aluminium reflector with light Source(luminaire) 6W COB LED, 4000K color temperature, with High power LED driver complete in all respects as directed by site engineer.(Halomax-HX 9533/ANKUR make XRL - LED - 02001 6W 4000K/WIPRO GILTZ LED LD98-900-038-40-XX/ PHILIPS RS 14OB LED 9-32/830 PSR P16 ALU or equivalent)

Flexible LED Strip with Triangular profile aluminium channel and high quality milky acrylic cover with Light Source(luminaire) 10 W/Rm flexible LED, 4000K color temperature, with High Power LED Drivers complete in all respects as directed by site engineer (Halomax-HX8026/ANKUR make XOL LED IP/0513 10Wor equivalent)

Flexible LED Strip with Rectangular profile aluminium channel and high quality milky acrylic cover.with light source(luminare)10 W/Rm flexible LED, 4000K color temperature, with High Power LED Drivers (Halomax- HX8024 /ANKUR LED - RL - GL - 5653 10W/METER 4000K or equivalent)

Surface mounted slim LED down lighter made of pressure die cast aluminium housing and acrylic diffuser with 6W LED, 4000K color temperature luminaire, with High Power LED driver or equivalent complete in all respects as directed by the site engineer(Halomax-HXCP 9574/ANKUR/WIPRO IRIS LED LD80-350-XXX-40-SM/ PHILIPS DN170C LED 6S-4000PSU WH or equivalent)

Wall mounted up and down light made of pressure die cast aluminium, one side narrow another side wide beam light output with luminare 2x3W LED, 4000K color temperature, with High Power LED driver or equivalent complete in all respects as directed by the site engineer( Halomax make HX 3070/ ANKUR or equivalent)

Wall mounted Mirror light with light source(luminaire) 12W LED, 4000K color temperature, with High Power LED driver complete in all respects as directed by site engineer(Halomax-HX 8421/ ANKUR/WIPRO TRIM LED LL20-111-XXX-40-NE/ PHILIPS BN021 LED 10S-6500 PSU GRS1 or eqivalent)

22W LED wall mounted Batten light, with frosted acrylic diffuser, 4000K color temperature(Wipro-TRIM LED LL20-221-XXX-40-NE1 /PHILIPS BN108CLED 20S PSU CDL WH or equivalent)

HVAC works BOQ for JKIL Showroom/ Experience Center @ Bemina, Srinagar, J&K The total floor area (interior) is 490 sqm

HIGH SIDE (EQUIPMENTS)

VRF UNIT Supply of VRF units complete with Twin Rotary Inverter type/ Scroll compressor, each ODU with 2 variable compressor ,air cooled condenser with low noise fan having interconnected control wiring and refrigerant piping housed in compact housing duly powder coated of following capacities (Toshiba, O General, Mitsubishi or equivalent) Minimum COP at 50% part load to be 5.7 or more. VRF Unit should be capable of Continuous heating during Defrosting in Winter and also should be capable of communicating with Smart phone via means of mobile app without any cable connection.Installation/ Service engineer should be able to diagnose the machine without opening the panel of the ODU.

12 HP (Heating & Cooling)

16 HP (Heating & Cooling)

Supply of indoor units with evaporator coil,fan and fan motor drain pan(Toshiba, O General , Mitsubishi or equivalent). The units shall be of following capacities :

2.5 HP Cassette Type Unit (with cordless remote)

5.0 HP Cassette Type Unit (with cordless remote)

1.25 HP Hi-wall Type Unit (with cordless remote)

Supply of Panel for Cassette Units

Supply of Individual Hi-wall AC Unit with cordless remote

1.0 TR Hi-wall (Inverter type, Cooling only,R-410A, (Toshiba , O General , Mitsubishi or equivalent)

LOW SIDE WORK

I / T / C of VRF units complete with Twin Rotary Inverter type compressor, each ODU with 2 variable compressor ,air cooled condenser with low noise fan having interconnected control wiring and refrigerant piping housed in compact housing duly powder coated complete in all respects as directed by the site engineer of following capacities.

12 HP (Heating & Cooling)

16 HP (Heating & Cooling)

I / T / C of indoor units with evaporator coil,fan and fan motor drain pan. The units shall be of following capacities :

2.5 HP Cassette Type Unit (With cordless remote)

5.0 HP Cassette Type Unit (With cordless remote)

1.25 HP Hi-wall Type Unit (With cordless remote)

I / T / C of Panel for Cassette Units

I / T / C of Individual Unit complete in all repects as directed by site engineer

1.0 TR Hi-wall ( Inverter, Cooling only, R-410A,)

S / I / T / C of Y-joints for indoor units

Outdoor Stand for Hi-wall outdoor units

Gas top up of AC machines

Individual Hi-wall unit

P / F of refrigerant pipe with 13 mm/ 19 mm thick closed cell elastomeric nitrile rubber tabular insulation as per specifications and drawing

28.6 mm dia

22.2 mm dia

15.9 mm dia

12.7 mm dia

9.5 mm dia

6.4 mm dia

P / F of PVC drain pipe duly insulated with fitting for following sizes

25mm dia

32mm dia

P / F of Control cum Transmission wiring in suitable existing PVC conduits between indoor and out door unit & indoor unit & its remote controller.

2C x 1.5 Sqmm Cu FRLS

4C x 1.5 Sqmm Cu FRLS

S / I / T / C of 700 CFM capacity single phase Circular inline exhaust fan for Toilet/ Pantry with all accessories, as required at site

S / I / T / C of Site Fabricated Toilet/ Pantry exhaust air ducting with 24G GSS including all fittings, complete in all respect

S / I / T / C of 150x150mm Powder coated Toilet/ Pantry Exhaust air square grilles without VCDs, with collar etc. complete in all respect

S / I / T / C of MS powder coated perforated type Cable tray for Refrigerant & Drain piping, with bends and necessary fittings, suspension hardware etc.

400x75x2mm thick

300x75x2mm thick

200x75x2mm thick

150x75x2mm thick

Electrical works (MV & LV) BOQ for JKIL Showroom/ Experience Center @ Bemina, Srinagar, J&K The total floor area (interior) is 490 sqm

Supplying, Installation, Testing and Commissioning of Main Electrical Panel, as per SLD and specification, fabricated out of 16 SWG CRCA sheet steel in compartmentalized design as per specification and drawings. These distribution boards shall be wall /floor mounted. The rates shall include the painting, circuit terminations with numbering, earthing and one set of suitable rating of 415V 3 phase 4 wire, 50Hz color coded bus bar with neutral link, earthing terminals suitable for outgoings, and all indications, metering, control wiring, etc. as per SLD etc. and as required complete in all respect, as per following details

MAIN LT PANEL(MDB) INCOMING: One (1) Nos., 160A, 415V, 25 kA (Ics=Icu=Icw =100% for 1 second), 4 Pole MCCB with Micro-processor based release for Over current, Short Circuit and Earth fault protections, and with ON/OFF/TRIP indications, metering, protections, push buttons, MFM etc. as per SLD complete in all respects as mentioned and as required. (Main Incomer from Meter Board/ Transformer as per existing scheme at site) Bus Bars: One (1) Set of 200A TPN bus bars of Copper (25x5mm) Outgoings: Three (3) Nos 32A 4P MCB 10 kA"C" Series Nine (9) Nos 63A 4P MCB 10 kA"C" Series Fourteen (14) Nos 25A SP MCB 10 kA"C" Series Thirty Three (33) Nos 10A SP MCB 10 kA"C" Series Built-in Capacitor Panel with APFCR with following capacity capacitors Three (3) Nos 2 kVAR Capacitor S.D Duty 440 V Two (2) Nos 10 kVAR Capacitor S.D Duty 440 V MAIN LT PANEL as described above, as per SLD

Supplying, Installation, Testing and Commissioning of following:- three pole and neutral, sheet steel, double door MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus-bar, neutral bus-bar, earth bar, din bar, detachable gland plate, inter-connection, phosphatized and powder painted including earthing etc. as required, as per respective SLDs,

Light + Power DB FF (LPDB FF) 6 Way TPN DB Incomer - One (1) No. 63A 4P MCB 10 kA"C" Series Three (3) Nos. 32A 2P RCCB (30mA) Outgoings - Thirteen (13) Nos 10A SP MCB 10 kA"C" Series Five (5) Nos 25/32A SP MCB 10 kA"C" Series

UPS DB (UDB) 16 Way SPN DB Incomer - One (1) No. 32A 2P MCB with PVC cover One (1) No. 32A 2P MCB 10 kA"C" Series Outgoings - Sixteen (16) Nos 10A SP MCB as required

Light / Power Point Wiring, Switch/ Sockets & Sub-mains Wiring

S / I / T / C of Switch controlled primary light points with 2.5 Sqmm PVC insulated 1100 volts grade multistranded FRLS copper conductor wires, in IS marked 25 mm dia medium duty PVC conduit, recessed and/or surface mounted, including the cost of cutting chases in brick work and repairing/making the chases good and including providing and fixing of 6 amps single pole modular switch, complete with grid & cover plate in GI box (zinc chromate passivated) and earthing of fixtures and the box with 1.5 sqmm PVC insulated copper conductor earth wire including Circuit Wiring from DB to switch boards, with 2.5 sqmm PVC insulated copper wire complete as per specifications and as required.

Same as above (3.1) but Switch controlled secondary points with 2.5 sqmm PVC insulated 1100 volts grade multistranded FRLS copper conductor wires

S / I / T / C of 5 pin 6A 240 volt switch socket outlet with 2x2.5 sqmm (P+N) PVC insulated 1100 volts grade multistranded FRLS copper conductor wires, in IS marked 25 mm dia medium duty PVC conduit, recessed and/or surface mounted, including the cost of cutting chases in brick work and repairing/making good, including the cost of providing and fixing modular grid plate mounted 5 pin 6 amp 240 volt combined shuttered socket outlet alongwith 6 amp 240 volt control switch housed in a zinc chromate passivated MS box with moulded cover plate and earthing of third pin of socket with 1.5 sq.mm PVC insulated copper conductor wire, complete as per specifications and as required. (Maximum two (2) Outlets to be connected on one circuit)

S / I / T / C of 6 pin 6/16A 240 volt switch socket outlet with 2x4.0 sqmm (P+N) PVC insulated 1100 volts grade multistranded FRLS copper conductor wires, in IS marked 25 mm dia medium duty PVC conduit, recessed and/or surface mounted, including the cost of cutting chases in brick work and repairing/making good, including the cost of providing and fixing modular grid plate mounted 6 pin 6/16 amp 240 volt combined shuttered socket outlet alongwith 16 amp 240 volt control switch housed in a zinc chromate passivated MS box with moulded cover plate and earthing of third pin of socket with 2.5 sq.mm PVC insulated copper conductor wire, complete as per specifications and as required. (Maximum two (2) Outlets to be connected on one circuit)

S / I / T / C of Outdoor grade (IP 66) switch-socket outlets of following specifications,

16A Single phase (3 pin) outdoor grade Industrial switch socket

63A Three phase (5 pin) outdoor grade Industrial switch socket

Supply & fixing of TV socket outlet with modular plate in zinc chromate passivated MS box complete as per specifications and as required

S / I / T / C of Innofit make DeskPORT - FTB 164 Hydraulic box, module as per electrical drawing, as required at site

S / I / T / C of Sub-mains, AC & UPS wiring with PVC insulated copper conductor of suitable size 660/1100 Volts grade wires in existing concealed or surface mounted 25/32/40 mm dia PVC rigid conduit either in slab or on above false ceiling or in walls or in partitions and in existing raceway, cable trays terminating the conductors in respective panels DB's switch boxes with suitable size earth wires and associated hardware etc.as per technical specifications and drawings.

2x4.0 + 1x2.5 Sqmm Copper FRLS wires

4x6.0 + 2x2.5 Sqmm Copper FRLS wires

4x10.0 + 2x4.0 Sqmm Copper FRLS wires

Electrical Cables

Supply, laying , testing, commissioning & termination of 1100 V grade XLPE insulated aluminium conductor armoured cables including the cost of providing required gap between adjacent cables (minimum one cable dia) and including the cost of providing identification tags, all crimping lugs and compression glands, cable sockets insulation tape sealing compound etc. complete as per specification, as required

50 Sqmm, 3.5C Al

Conduits & Cable Trays

Providing, Receiving, storing, handling, assembling fixing in position testing and commissioning of MS painted Ladder type Cable tray, with bends and necessary hardware etc.

300x50x2mm thick

2000x50x2mm thick

150x50x2mm thick

Supplying and fixing fabricated steel items like cable tray supports, MS clamps, hangers, frames etc. made of MS angles/flats, duly painted with primer and two or more coats of enamel paint including drilling holes cutting ,bending , tapping, threading etc. complete in all respect as per site requirement.

Supplying, fixing and laying of following conduits (for various low voltage cabling like Video conferencing, CCTV, Cable TV etc.) in ceiling/ wall panelling/ partitions/ flooring etc. includes all chase cutting and making the surface good along with the 2mm dia size GI pull wire complete in all respect of following sizes & specifications

25mm dia 16 SWG PVC conduit

25mm dia. Flexible PVC conduit

Earthing Work

Supplying,Installation and Testing of 48 mm Cu. Pipe Filled with Crystalline conductive Mixture with Copper Strip with Terminal Size 40 mm x 6 mm and Inner Strip 25 x 3 mm of Length 2 mtr with Ecofriendly Backfill Compound 50 Kg.Makes:- Genus/Ashlok/TruePower or equivalent, inclusive of earth pit chamber (300mmx300mm) with CI cover complete in all repects as directed by the site engineer.

Supply and Fixing of following Copper earthing wires on existing tray/ trench/ ground/ PVC pipe/ walls including all necessary fixing accessories and effecting connections with copper riveting /welding etc. as approved. All copper joints shall be tinned:

4 SWG bare Cu Wire

25x3mm Cu Strip

Light Fixture, Fan & Appliances The total floor area (interior) is 490 sqm

Installation, Testing & Commissioning of following light fixture & fans in their respective locations with all accessories, inclusive of cutting in false ceiling if required, complete in all respects as directed by the site engineer.

Recess/ Surface mounted light fixtures

Ceiling/ Wall/ Exhaust Fans

Electrical Equipments

S / I / T / C of 3.0 kVA 1-phase On-line UPS (APC/ Emerson make or equivalent) with built-in 15 minutes SMF type battery back-up etc. Complete in all respects as directed by the site engineer.

S / I / T / C of AMF panel suitable for 62.5 kVA 3-phase Silent DG, with required signal & power wiring, complete in all respects as directed by the site engineer.

Misc. Items

Temporary Lighting for site work

LV Items The total floor area (interior) is 490 sqm

Networking & Telephone

S / L of 1000 Mbps CAT-6 Cable for LAN, Access control, TV etc. (AMP make/D-Link or equivalent), in IS marked 25 mm dia medium duty PVC conduit, recessed and/or surface mounted, including the cost of cutting chases in brick work and repairing/making the chases good with GI box (zinc chromate passivated) complete in all respects as directed by the site engineer.

S / L of 2 core telephone cable, in IS marked 25 mm dia medium duty PVC conduit, recessed and/or surface mounted, including the cost of cutting chases in brick work and repairing/making the chases good with GI box (zinc chromate passivated) complete in all respects as directed by the site engineer.

S / F of Modular Network Data outlet with face plate, RJ-45 socket and Zinc chromate passivated box complete as required (AMP make/Schneider or equivalent) inclusive of jacking and numbering on the both sides complete in all respects as directed by the site engineer.

S / F of RJ-11 Telephone socket outlet with modular plate and Zinc chromate passivated box complete as required (AMP make/Schneider or equivalent)complete in all respects as directed by site engineer.

S / I / T / C of 10 pair Telephone Tag block with enclosure complete in all respects

S / I / T / C of 24 port patch panel as complete as required, D-Link / Legrand make or equivalent inclusive of jacking complete in all respects as directed by the site engineer.

S / I / T / C of 24 port Network Switch/ router as complete as required, D-Link / Legrand makeor equivalent inclusive of jacking complete in all respects as directed by the site engineer.

S / I / T / C of CAT-6 Patch Cord, 3 Feet as complete as required, D-Link / Legrand make or equivalent

S / I / T / C of 11U Rack (D-Link /Legrand make or equivalent) including all accessories as complete as required as directed by site engineer.

Fire Detection Works for JKIL Showroom/ Experience Center @ Bemina, Srinagar, J&K The total floor area (interior) is 490 sqm

Fire Detection System (Addressable Type System)

S / I / T / C of Microprocessor based 2 loop capacity, Networkable analogue addressable type fire alarm control panel with 640 character LCD display, The panel should be equipped with sufficient numbers of loop with 15% spare capacity with each loop shall have a capacity of 250 analogue addressable devices in one loop. Four access levels, capable of taking Flash Scan devices, flash EPROM sufficient numbers of programmable relay controls for controlling AHUs, pressurization fans, ventilation fans at fire pump room, monitoring of fire sprinkler and fire hydrant pump, 240 volts AC power supply, automatic battery charger, 24 volts sealed lead acid batteries sufficient for 24 hours normal working and then be capable of operating the system for 2 hours during an emergency conditions as required. The Panel shall have BACNET CARD for integration (UL 9th Edition Approved) (Honeywell-Esser, Johnson Controls, Securiton, Siemens make or equivalent)

S / I / T / C of Analog Addressable Intelligent multi-sensor detector, VDS / UL approved with inbuilt optical smoke sensors as well as additional heat detector sensor with decentralized intelligence, soft addressable photothermal type with inbuilt fault Isolator as per NFPA style 7 wiring complete with base having IP as per recommended Standard.(Note : Detectors without built-in fault isolator is also acceptable but in such case the contractor shall provide one independent fault isolator module for every group of addressable devices ( Numbers of addressable devices in a group will be as per latest recommended standards ) without any additional cost) (Honeywell-Esser, Johnson Controls, Securiton, Siemens make or equivalent)

S / I / T / C of Analog Addressable Intelligent heat detector, VDS / UL approved with inbuilt with inbuilt fault Isolator as per NFPA style 7 wiring complete with base having IP as per recommended Standard.(Note : Detectors without built-in fault isolator is also acceptable but in such case the contractor shall provide one independent fault isolator module for every group of addressable devices ( Numbers of addressable devices in a group will be as per latest recommended standards ) without any additional cost) (Honeywell-Esser, Johnson Controls, Securiton, Siemens make or equivalent)

S / I / T / C of Addressable Control Module with inbuilt isolator & IP65 casing VDS/ UL approved (Honeywell-Esser, Johnson Controls, Securiton, Siemens make or equivalent) complete in all repspects as directed by the site engineer.

S / I / T / C of Addressable Loop Powered Hooter (sound output of minimum 90 db) with inbuilt isolator & IP65 base and VDS/ UL approved (Honeywell-Esser, Johnson Controls, Securiton, Siemens make or equivalent) complete in all repects as directed by the site engineer.

S / I / T / C of LED type Response Indicator (VDS/UL approved ) having 2 Nos. red coloured LED Lamps including connections etc. (Daksh, Agni make or equivalent)complete in all respects as directed by the site engineer.

S / I / T / C of Addressable Manual Call Point VDS/ UL approved soft addressable type within built fault isolator as per NFPA style 7 wiring complete as required (Honeywell-Esser, Johnson Controls, Securiton, Siemens make)

S / L of 2Cx1.5 Sqmm Armoured cable

S / I Fire Extinguishers, Ceasefire make, complete with all accessories as per manufacturers specifications

2 Kg capacity ABC Powder (MAP 50) based Fire Extinguisher or equivalent from ABC Fire make or Newage make

S / I / T / C of Green colour, Double sided LED Fire Exit signage with built in battery back-up for 2 hrs(Bajaj make 220210, BESL 03 LED DSD WBB Green or equivalent)complete in all respects as directed by the site engineer.

CCTV Works for JKIL Showroom/ Experience Center @ Bemina, Srinagar, J&K The total floor area (interior) is 490 sqm

CCTV System

S / I / T / C of IP based CCTV system(CP Plus make/one-Tech-One or equivalent) with following components, complete in all respects

Internal 4 MP Full HD WDR IR Dome Camera (CP Plus CP-UNC-DD40L3-D/one-Tech-One or equivalent),

External 4 MP Full HD IP WDR IR Bullet Camera (CP Plus-CP-ENC-T41L3-VMD /one-Tech-One or equivalent)

16 channel 16PoE NVR (Network Video Recorder) with server rack module (CP-ENR-4516-P16) with 4 nos 24 TB capacity each SATA HDD

Wiring with Dlink make CAT-6 wire in existing PVC conduits

Music Works for JKIL Showroom/ Experience Center @ Bemina, Srinagar, J&K The total floor area (interior) is 490 sqm

Piped Music System

S / I / T / C of Bosch or equivalent make as approved by the Engineer in Charge, Plena Background Music system comprising of following components:

Plena main BGM/Paging system controller with inbuilt 300W mixer amplifier with volume control MP3 DVD/CD player. The unit should play normal audio and video DVD/CDs as well as long-play MPEG2, MP3 encoded CDs with bit rates from 32kbps to 32-kbps , mono/stereo and S-Video connector are available for Video Output. The main controller should have inbuilt digitally controlled FM/AM tuner which should have 10 presets. One microphone input with feature of speech filter. Model no. PLN-2AI0120

10W compact recess mounted speakers, Bosch model no. LBD 8353/10 or equivalent.

Wiring for Music system. 80/0.2mm (2.5 Sqmm) 2-core flexible twin twisted colour coded ATC overall PVC sheathed audio cable (Krystal make or equivalent) laid in existing surface/ recessed PVC conduits as required

Individual Music Volume controller (Bosch or equivalent)

Drainage & Water Supply works BOQ for JKIL Showroom/ Experience Center @ Bemina, Srinagar, J&K The total floor area (interior) is 490 sqm

Soil & Waste Pipes

Providing, fixing, jointing and testing in position the uPVC SWR grade pipe (Astral/Supreme/SFMC make or equivalent) for soil, waste and rain water installation conforming to I.S. :4985 (working pressure 6 kg/sq. cm) cut to required lengths including all necessary fittings (P/ S traps) and specials such as Bends, junctions, offsets, cleanout plugs as required/directed at site, access pieces (plain or door) & vent cowl. Fixing at wall/ceiling level supported by clamps & hangers etc. Making proper connection including cutting, chases/ holes in floors/ walls/ slab etc. and making good the same after pipes have been duly laid, making connection with existing manholes/ gully traps complete as directed by site engineer.

75 mm outer dia

110 mm outer dia

Providing and fixing in position uPVC SWR grade pipes and fittings working pressure 6 kg/sqcm) & cleanout plugs conforming to IS (for waste pipe from bottle trap to floor trap) Including fixing at wall / ceiling level supported by clamps and hangers etc. Cutting holes in wall/floors/slabs and making good the same with cement concrete 1:2:4 complete as required.

32 mm outer dia

40 mm outer dia

P / L cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm and down gauge) 75mm in bed and all round uPVC SWR grade soil/ waste pipe

75 mm dia under floor including shuttering and centering

110 mm dia under floor including shuttering and centering

P / F Chilly make SS square cleanout plug with hinges & suitable inset keys for opening male threaded joint caulked to C.I. pipe including cost of lead jointing

75 mm dia

100 mm dia

P / F Chilly make SS 304 Grade Anti-cockroach Floor trap, CCT-SFS-76 Lifestyle square, 140x140mm, joints treated with neat cement slurry with an admixture of pigment to match the shade of stone/tile

Cold / Hot Water Supply

Supply, laying, testing and commissioning of CPVC pipes (Astral/Supreme/SFMC make or equivalent) conforming to CTS (copper tube size) SDR-11 as per ASTM D 2846 with necessary fittings, such as bends, tees, unions, reducers, headers, brass fittings flanges & plugs etc., up to the size of 50 mm dia, jointing with CPVC solvent cement of medium body IPS brand or equivalent conform and fixing at wall/ceiling level supported by clamps, hangers, structural steel supports, etc. as per specifications. Threading, jointing, and making proper connections, cutting hole in wall/floor/slab and making good the same good with cement concrete 1:2:4, complete as required. Cost shall include making connections with G.I. pipes & fittings.

15 mm outer dia

20 mm outer dia

25 mm outer dia

32 mm outer dia

Supply and covering (Thermal Insulation KFlex/Armaflex make or equivalent) hot water pipes with 9mm thick performed closed cell nitrite rubber pipe section insulation having density not less than 60 kg/cm2 and "K" valve not more than 0.034 w/m Deg. K @ 20 Deg C mean temperature, jointing complete in all respects as directed by the site engineer

15 mm outer dia

20 mm outer dia

P / F full way lever operated forged brass ball valve(Neu/Zoloto make or equivalent) of brass body with forged brass hard chrome plated steel ball tested to a pressure not less than 10 Kg / sqcm with threaded / flanged joints complete in all respects with nuts, bolts, gaskets, washers etc.

20 mm dia

25 mm dia

32 mm dia

Pumps The total floor area (interior) is 490 sqm

S / I / T / C of pressure pump(Grundfos CM/WILO/Franklin Electric make or equivalent)with discharge capacity 133LPM@ head of &.2 mts inclusive of starter panel wiring, etc. complete in all respect as directed by site engineer.

S / I of Water Level Sensor Panel with automatic electrical power supply cut-off, including all wiring etc. complete in all respect as directed by the site engineer.

M M SHAWL ENGINEER AND CONTRACTORS PVT LTD