Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹21.1 L
EMD Value
₹42,140
Closing Date
19 Dec 2025, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer RnB Division Kulgam
Executive Engineer RnB Division Kulgam
Upgradation /Renovation Eco Paneling for conference Hall Classrooms and other Departmental Cabin at AMGDC Kilam
2025_PWDJK_297941_6
87/2025-26/RnB/Kul/7956-65 dated 11 -12-2025
Open Tender
Civil Works
Percentage
60 days
Kulgam
Please refer Tender documents.
2 documents required · 2 mandatory
₹800
MH 0069
₹42,140
17 Dec 2025
12 Dec 2025
20 Dec 2025
12 Dec 2025
19 Dec 2025
12 Dec 2025
Wood Penelingf_Chowkidar Hut
Supplying and fixing of 50 mm x50 mm wooden frame work for 2x2 ft frames using imported German /Russain as a base /jambs for panelling complete job
Supplying and fixing of 8-12 mm thick imported Rait wood panelling over 12 mm plywood will all linds of materials like nails , fevcoal etc complete finished with french spirit polish of required shade and manufacture
Renovation of Washroom
Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix)
Extra for cutting reinforcement bars manually/by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional areas of R.C.C. or R.B. work) as per direction of Engineer-in-charge. sqm 905
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm
Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/by mechanical means including stacking of pipes within 50 meters lead as per direction of Engineer-in-charge : 15 mm to 40 mm nominal bore
Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead With cement mortar 1:4 (1 cement : 4 fine sand)
Providing & Applying polymer modified, flexible cementatious negative side waterproofing coating with elastic waterproofing polymers on interior wall plaster surface in three coats @14.35 kg /10 sqm. One coat of self priming of cementatious waterproofing polymer(dilution with water in the ratio of 1:1) and two coats of cementatious waterproofing polymer (dilution with water in the ratio of 3:1 ) after scrapping and properly cleaning the surface to remove pre-existing paint film & loose particles till plaster is visible, complete in all respect as per the direction of Engineer-in-Charge.
P/F first quality ceramic glazed floor tiles of app make like NITCO, ORIENT, SOMANY, KAJARIA or equivalent make in all colour shades excpt begundy, bottle green black of any size in skirting risers of steps dados over 12mm bed of cement mortar 1:3 incld. All carrige complete[ 600mm x600mm ]
P/F first quality ceramic glazed wall tiles of app make like NITCO, ORIENT, SOMANY, KAJARIA or equivalent make in all colour shades excpt begundy, bottle green black of any size in skirting risers of steps dados over 12mm bed of cement mortar 1:3 incld. All carrige complete [300 x450] mm
Providing and fixing water closet squatting pan (Indian type W.C. pan)with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
Providing and Placing in terrace PVC storage tank with cover and suitable locking arrangement incl. making necessary holes for inlet, outlet with tanki Nipple and over flow pipes, ball cock, incl. all fittings (Triple Layer)
Providing and fixing water gyzer 50 litre Capacity of approved make incl. all fixing charges etc complete as approved and directed by engineer incharge [racold/venus/ havells]
Providing & Fixing of PPR( Internal work ) complete with all PPR Fittings and clamps including cutting and making good the walls whereever required as per BC and as directed by engineer incharge
Providing & Fixing following PVC (B Type) fittings of approved brand and quality as directed by engineer incharge all complete
coller 75 mm
coller 100 mm
coller 150 mm
Floor trap 100 mm
Door bend
Providing & Fixing following C.P fittings of standard quality ( Jacquar Made) incl. all fixtures etc complete as per directions of engineer in charge
Providing and fixing C.P. brass bib cock long body of approved quality conforming to IS : 8931 a) 15 mm nominal bore
Angle valve
Providing and fixing brass stop cock of approved quality. 20 mm nominal bore each
Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: 18.4.1 One urinal basin with 5 literwhite P.V.C automatic flushing cistern
Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)
Gate Keeper Post
Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:
p/l of dry stone soling hand packed complete
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 3 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) incld: all carriages
Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete [welded]
Providing and fixing aluminum work for doors, windows, ventilators andpartitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 andIS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides withrequired EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanicallywherever required including cleat angle, Aluminum snap beading forglazing / panelling, C.P. brass / stainless steel screws, all complete as perarchitectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) For fixed portion
Providing colour corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.5 mm
supplying and fixing of 8-12 mm thick imported Rait wood panelling over 12 mm plywood will all linds of materials like nails , fevcoal etc complete finished with french spirit polish of required shade and manufacture jamming should be 2x2 ft with 50mm wooden joists
keep provisions for 2 lightning posts
stage.html
html • 0.02 MB
cancelled_1.pdf
pdf • 0.39 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.69 MB
BOQ_965771.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .