REPAIR, PAINTING AND POLISHING OF WOODEN AND STEEL FURNITURE AND CONVERSION OF CHARPOY, GI PIPE NYLON NEWAR TO CHARPOY GI PLY TOP AT BSO (SOUTH), MIC and S AND CQA(V) UNDER GE(SOUTH) AHILYANAGAR

M&L for removing of userviceable 3 way elbow of GI charpoy and supply and fix new 3 way elbow 32mm dia, medium grade ISI marked weight not less than 450 Grams of each directed. FD-220

M&L for removing unserviceable check nut of GI charpoy and supply and fix new check nut 32mm dia all as directed . FD-220

M&L for removing of unserviceable long rail of GI charpoy and supply and fix new long rail 32mm medium grade, ISI marked of make TATA/Jindal/Swastik/Zenith including cutting, threaing at both ends and fixing all asspecified and as directed. FD-220

M&L for converting the unserviceable long rail obtained from item No 3.00 above into two short rail including cutting threading at both ends and fixing all as directed.

M&L for removing of unserviceable short rails of GI charpoy and converting the same into two legs including cutting, threding at one end and fixing including removing of unserviceable legs all as directed. FD-220

M&L for removing of existing wornout newar of GI charpoy and reweaving the same with new 50/55mm wide nylon newar of vergin quality weighing not less than 1.50 Kg per charpoy after tightening the loose components including provn of 3mm thick 50mm dia MS circular plate welded to the legs all as directed. Note : Reweaving shall be closely done on both side. FD-220

M&L for removing of unserviceable nylon newar from charpoy GI pipe, S & F commercial plywood of size 1980mm x 900mmx12mm thick BWR grade and fixing with 06 Nos nut with bolt of 6mm dia 60mm long to be used for fixing of plywood top including drilling holes and following arrangement completed all as specified as directed by Engr-in-charge. FD-220 (a) S&F 3 Nos 25mm square MS hollow tube 16 guage wall thickness of length not less than 83.6cms each welded with fillet weld all around 3mm thick to long rails of GI pipe Charpoy at equal space to support plywood all as directed

M&L for removing unserviceable Square tube from Table dining ORs, Table clerk steel and Table office officer steel and S&F new square tube all as per directed by Engineer-in-charge. FD-165M

M&L for removing unserviceable top from table dining ORs and S&F new Top made out of 18/19mm particle board including cover of 22 mm guage aluminium sheet as per specification shown on drawing and as directed. FD-165M