Loading
Loading…
New: tenders and results on WhatsApp
New: Find tenders, results and companies on WhatsApp, by text or voice note
New: tenders and results on WhatsApp
New: Find tenders, results and companies on WhatsApp, by text or voice note
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.8 LAccepted-AOC H 13 GEETANJALI PARK WEST SAGARPUR NEW DELHI 110046 | NEW DELHI | DELHI | 110046 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹28.0 L+₹1.1 L (4.17%)Rejected-Finance GROUND FLOOR F 11 PHASE II MAYAPURI WEST DELHI DELHI 110064 | DELHI | WEST DELHI | DELHI | 110064 | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹28.9 L+₹2.0 L (7.62%)Rejected-Finance ROOM NO 145 MASJID WALI GALLI GANESH MURTI NAGAR PART NO 2 COLABA MUMBAI 05 | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹38.9 L+₹12.0 L (44.5%)Rejected-Finance | L4 | Rejected-Finance Other than L1 |
| Sl No | Description | Qty | Unit | J.P. Enterprises L1 | AMIT ENTERPRISES L2 | CHOUDHARY ELECTRICAL L3 | shakti construction L4 |
|---|---|---|---|---|---|---|---|
| 1.00 | Excavation in trenches in any type soil /rock (soft/loose/hard/dense soil/rock) n.exe 1.5 mtr wide and n.exe 1.5 mtr in depth for foundation laying of pipe etc n.exe 10 Sqmm on plan and n.exe 1.5 mtr in depth and getting out complete all as specified and as directed by Engineer-in-charge. NOTE : while removing the pipe line. Contractor shall replaced the broken tiles with new as per existing . The quoted rates including for all the materials / t&p / machinery used in this item no material can paid / measured seperately | 35 | CUM | 150 ₹5,250 Lowest | 150 ₹5,250 Lowest | 250 ₹8,750 | 300 ₹10,500 |
| 2.00 | Returning filling in including spreading levelling watering and well ramming hard / dense soil in layers not.exe 25cm Each layers complete all as specified and as directed by Engineer-in-charge | 30 | CUM | 30 ₹900 | 20 ₹600 Lowest | 50 ₹1,500 | 110 ₹3,300 |
| 3.00 | Removal of excavated material & surplus spoil to a distance n.exe 50 mtr and depositing where directed at a level not exe 1.5 mtr above the starting point complete all as specified and as directed by Engineer-in-charge | 5 | CUM | 200 ₹1,000 | 50 ₹250 Lowest | 500 ₹2,500 | 300 ₹1,500 |
| 4.00 | Taking up cast iron water mains of 100mm bore including all fittings with spigot and socket end and lead joints including burning out joints and recovering lead complete all as specified and as directed by Engineer-in-charge | 30 | RM | 80 ₹2,400 | 40 ₹1,200 | 200 ₹6,000 | 30 ₹900 Lowest |
| 5.00 | All as per above item No 4 here-in-before but 150mm bore | 60 | RM | 100 ₹6,000 | 50 ₹3,000 Lowest | 250 ₹15,000 | 50 ₹3,000 Lowest |
| 6.00 | All as per above item No 4 here-in-before but 200mm bore | 30 | RM | 120 ₹3,600 | 60 ₹1,800 Lowest | 250 ₹7,500 | 100 ₹3,000 |
| 7.00 | All as per above item No 4 here-in-before but 250mm bore | 30 | RM | 150 ₹4,500 | 65 ₹1,950 Lowest | 300 ₹9,000 | 150 ₹4,500 |
| 8.00 | M&L for Cutting to cast iron pipes of 80mm bore before laying in position for insertion of new tees, branches, bend and new connection etc complete all as specified and as directed by Engineer-in-charge | 4 | Each Job | 200 ₹800 | 200 ₹800 | 600 ₹2,400 | 150 ₹600 Lowest |
| 9.00 | All as per above item No 8 here-in-before but 100mm bore | 4 | Each Job | 250 ₹1,000 | 300 ₹1,200 | 700 ₹2,800 | 200 ₹800 Lowest |
| 10.00 | All as per above item No 8 here-in-before but 150mm bore | 5 | Each Job | 350 ₹1,750 | 400 ₹2,000 | 800 ₹4,000 | 320 ₹1,600 Lowest |
Tender Value
₹38 L
EMD Value
₹76,000
Closing Date
18 Jun 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) SUBROTO PARK
GE (AF) Subroto Park, Delhi Cantt Delhi-110010
As described in Bill of quantities
2025_MES_709738_1
GE/SP/TOKEN-55/2024-2025
Open Tender
Electrical and Maintenance Works
Item Rate
120 days
GE (AF) SUBROTO PARK
As per NIT and tender documents
9 documents required · 9 mandatory
₹500
GE (AF) SUBROTO PARK
₹76,000
Yes
20 Aug 2025
23 May 2025
21 Jun 2025
23 May 2025
18 Jun 2025
6 Jun 2025
Amount
Excavation in trenches in any type soil /rock (soft/loose/hard/dense soil/rock) n.exe 1.5 mtr wide and n.exe 1.5 mtr in depth for foundation laying of pipe etc n.exe 10 Sqmm on plan and n.exe 1.5 mtr in depth and getting out complete all as specified and as directed by Engineer-in-charge. NOTE : while removing the pipe line. Contractor shall replaced the broken tiles with new as per existing . The quoted rates including for all the materials / t&p / machinery used in this item no material can paid / measured seperately
Returning filling in including spreading levelling watering and well ramming hard / dense soil in layers not.exe 25cm Each layers complete all as specified and as directed by Engineer-in-charge
Removal of excavated material & surplus spoil to a distance n.exe 50 mtr and depositing where directed at a level not exe 1.5 mtr above the starting point complete all as specified and as directed by Engineer-in-charge
Taking up cast iron water mains of 100mm bore including all fittings with spigot and socket end and lead joints including burning out joints and recovering lead complete all as specified and as directed by Engineer-in-charge
All as per above item No 4 here-in-before but 150mm bore
All as per above item No 4 here-in-before but 200mm bore
All as per above item No 4 here-in-before but 250mm bore
M&L for Cutting to cast iron pipes of 80mm bore before laying in position for insertion of new tees, branches, bend and new connection etc complete all as specified and as directed by Engineer-in-charge
All as per above item No 8 here-in-before but 100mm bore
All as per above item No 8 here-in-before but 150mm bore
All as per above item No 8 here-in-before but 200mm bore
All as per above item No 8 here-in-before but 250mm bore
Supply and laying cast iron pipes of 100mm bore with spigot and socket ends centrifugally cast class LA in any length laid in trenches complete all as specified and as directed by Engineer-in-charge .
All as per above item No 13 here-in-before but 150mm bore
All as per above item No 13 here-in-before but 200mm bore
All as per above item No 13 here-in-before but 250mm bore
Supply and fixing and testing of CI fittings flange and sockets / all socketed / all flanged type such as bend upto 150mm bore (any type radius and angle) tapers any type (straight, bend, increasing, descreasing or double socket etc), Tee piece single branch, 'Y' junction, double branch cross (all sockets or socket and spigot) collors, caps and plugs including dewatering complete all as specified and as directed by engr in charge.NOTE: Excavation earth work in any type of soil and run lead joints tighten joints rubber gasket shall be measured and paid seperately.
All as per above item No 17 here-in-before but 200 to 300mm bore
Supply and fixing in replacement of unserviceable sluice valve cast iron with brass spindle PN-1.6 and fly nut flanged both ends and drilled for jointing wheel head type conforming to IS 14846 including two flanged joints with nuts bolts and washers rubber insertion packing etc for 250mm bore pipe as in repairs and ISI marked complete all as specified and as directed.
All as per above item No 19 here-in-before but 200 mm bore
All as per above item No 19 here-in-before but 150mm bore
All as per above item No 19 here-in-before but 100mm bore
All as per above item No 19 here-in-before but 80mm bore
Supply and fixing in replacement of unserviceable jointing to cast iron pipe of size 250mm bore spigot and socket by run lead joints including spun yarn and caulking of lead joints complete all as specified and as directed by Engineer-in-charge
All as per above item No 24 here-in-before but 200mm bore
All as per above item No 24 here-in-before but 150mm bore
All as per above item No 24 here-in-before but 100mm bore
All as per above item No 24 here-in-before but 80mm bore
Taking out existing GI pipe 80mm dia from trenches / walls / roof / floor etc including connection and cleaning for refixing or removal and making good to distrubed area (surface of walls / floor etc) complete all as specified and as directed by Engineer-in-charge
All as per above item No 29 here-in-before but size 50mm bore
All as per above item No 29 here-in-before but size 32/40mm bore
All as per above item No 29 here-in-before but size 25mm bore
All as per above item No 29 here-in-before but size 20mm bore
All as per above item No 29 here-in-before but size 15mm bore
Supply and fixing GI tubing medium grade 80mm dia with all fittings complete laid in trenches / on walls / on ceiling / roof etc incl necessary suitable size of MS clamps / saddling on walls / ceiling etc complete all as specified and as directed by Engineer-in-charge.
All as per above item No 35 here-in-before but size 50mm dia bore
All as per above item No 35 here-in-before but size 32/40mm dia bore
All as per above item No 35 here-in-before but size 25mm dia bore
All as per above item No 35 here-in-before but size 20mm dia bore
All as per above item No 35 here-in-before but size 15mm dia bore
Cutting and screwing to existing MS / GI steel tubing for alteration or addition to pipe line of 40 to 50mm bore with new fittings and fixtures complete all as directed by Engineer-in-charge
All as per above item No 41 here-in-before but size 80 to 100 mm dia bore
Supply and fixing in replacement of unserviceable gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe 50mm dia complete all as specified and as directed by Engineer-in-charge.
All as per above item No 43 here-in-before but size 32 /40mm dia bore
All as per above item No 43 here-in-before but size 25mm dia bore
All as per above item No 43 here-in-before but size 20mm dia bore
All as per above item No 43 here-in-before but size 15mm dia bore
Supply and fixing in replacement of unserviceable PVC bib cock 15mm dia complete all as specified and as directed by Engineer-in-charge.
Supply and fixing in replacement of unserviceable PVC PTMT float valve 20/25 mm dia complete with PVC ball and connecting rod complete all as specified and as directed by Engineer-in-charge.
Supply and fixing in replacement cast iron non return valve flanged end conforming to IS 5312 of size 80mm dia complete with rubber flange, MS nuts & bolts complete all as specified and as directed by Engineer-in-charge.
All as per above item No 50 here-in-before but size100mm dia
All as per above item No 50 here-in-before but size 150mm dia
M&L Brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in including demolation of old brick work complete all as specified and directed.
M&L for PCC 1:4:8 type D-2, 100 mm thick for sub base including demolation of old PCC complete all as specified and directed.
M&L for PCC type B- 2,1:2:4 (using 40mm graded stone aggregate) ,100 mm thick including demolation of old PCC complete all as specified and directed.
M&L for plastering work 15mm thick on fair faces of brick work on concrete surfaces in 1:4 cement mortar for pillar supports including demolation of old plaster complete all as specified and directed.
Excavation over area and Surface dressing in soft/loose soil n exc 15 cm deep complete all as specified and directed.
M&L for Making good road to existing surfaces with using of patch premix bitumenous 25mm thick polymer based material over WBM 75mm thick including rolling etc complete all as specified and as directed by Engineer-in-charge
M & L as in repair Design, development, supply commissioning & testing EHCC certified ground tubular effective chemical earthing system ( CPRI tested for 15 KA current capacity for LT line) highly anticorrosive long life electrode with and including adequate protective coating to withstand severe wear conditions in the earth pit of the standard size comprising of 25mm x 3mtr long copper rod as primary conductor and hollow pure Copper tube of dia 50mm x 3mtrs long as secondary conductor to install with suitable connection terminal coforming of IS 3043: 1987 specification, highly conductive packing material to be filled in earth pits for providing uniform, low resistivity anticorrosive, hygroscopic medium around the earth system for improving the efficiency of current dissipation 02 Bags / 60 Kgs minimum or sufficient quantities required as per site complete including FRP earthing pit clause suitable cover, material and labour including 32x6mm earthing strip 10mtr length and testing after completion and result should be less than one Ohm complete, all as specified and as directed by Engineer-in Charge. Note:- Excavation for earthing in any surface hard/rock/soft soil for required length by using rock driller machine/other eqpt is inclusive in quoted rate and necessary earthing pit 60x60x6cm also inclusive in quoted rate.
M&L as in repair for earth continuity conductor of size 32x6 mm galvanised strip strip fixed on walls / burried in ground with and including fixing arrangments on walls like porcelain insulators screws washers etc complete all as specified and as directed by Engineer-in-charge
M&L for Construction of brick masonary valve pit of size 100cmx100cmx100cm (internal dimensions of chamber) depth to be reconed from the top of PCC in foundation to top of MS cover with MS sheet cover 3.15mm thick including frame of angle iron 40x40x6mm with locking arrangement including painting two coats of black synthetic enamel paint over a coat of red oxide primer etc including brick work in CM 1:6 15mm thick plastering in CM 1:4 (internal & external) and necessary excavation and earth work in any type of soil, returning, filling in disposal of surplus spoil to a distance not exe 50 mtrs 150mm thick PCC 1:4:8 type D-2 for base and PCC copying 15mm thick 1:2:4 using 12mm graded aggregate all as specified and as directed by Engineer-in-charge) for upto 250mm dia valve)
Dismantling of pressure pump set of Cap 0.5 HP to 1.0 HP from the existing site after disconnecting all electrical connections and refixing the same after carrying out repairs /overhauling of pump including transportation to local work shop & back complete all as specified and as directed by Engineer-in-charge. Note : - Spare parts replaced shall be paid seperately under relevant items
M&L for rewinding of pressure Pump set of capacity 0.5 Hp to 1.0 HP with same gauge of super enamelled copper winding wire after cutting the burnt windings cleaning slots including insulating materials PVC sleeves insulation paper wooden stick etc complete all as specified and as directed by Engineer-in-charge
S&F in replacement of Air Tank for pressure pump set of capacity 0.5 HP to 1.0 HP complete all as specified and as directed by Engineer-in-charge.
S&F in replacement of Pressure gauge 0-10 Kg / SqCM complete all as specified and as directed by Engineer-in-charge.
S&F pressure control switch suitable for 0.5 HP pressure pump set complete all as specified and as directed by Engineer-in-charge.
S&F in replacement gun metal non return valve of size 15mm bore complete all as specified and as directed by Engineer-in-charge.
S&F in replacement gun metal non return valve of size 20mm bore complete all as specified and as directed by Engineer-in-charge.
S&F in replacement gun metal non return valve of size 25mm bore complete all as specified and as directed by Engineer-in-charge.
S&F in replacement gun metal non return valve of size 40mm bore complete all as specified and as directed by Engineer-in-charge.
S&F in replacement gun metal non return valve of size 50mm bore complete all as specified and as directed by Engineer-in-charge.
Dismantling & taking out defective parts of booster pump set of capacity 0.5 HP to 1.5 HP and refixed after repairs and making complete serviceable by repairing / replacement of defective parts including tranportation to local work shop etc complete all as specified and directed by Engineer-in-charge. Note : - Minor Parts required to make pumpset serviceable also included in the unit quoted rate.
M&L for rewinding of Booster Pump set of capacity 0.5 Hp to 1.5 HP with same gauge of super enamelled copper winding wire after cutting the burnt windings cleaning slots including insulating materials PVC sleeves insulation paper wooden stick etc complete all as specified and as directed by Engineer-in-charge
S&F in replacement Running Capacitor 10.0 MFD complete all as specified and as directed by Engineer-in-charge
S&F in replacement Running Capacitor 25.0 MFD complete all as specified and as directed by Engineer-in-charge
S&F in replacement Running Capacitor 36.0 MFD complete all as specified and as directed by Engineer-in-charge
S&F in replacement Running Capacitor 50.0 MFD complete all as specified and as directed by Engineer-in-charge
S&F in replacement Running Capacitor 72.0 MFD complete all as specified and as directed by Engineer-in-charge
S&F in replacement Running Capacitor 125.0 MFD complete all as specified and as directed by Engineer-in-charge
S&F in replacement of ball bearing for 0.5 HP to 1.5 HP complete all as specified and as directed by Engineer-in-charge
S&F In Replacement CI Impeller Assy of Centrifugal mono block Pump set of capacity 0.5 HP to 1.5 HP as per sample (size varies depend upon the make and cap)
Supply and fix in replacement Decrin dozing pump Model No 96NG Q 51 , 100 PSI 40 GPD complete all as specified and as directed by Engineer-in-charge.
Supply and fix in replacement FRP TANK of Capacity 100 LTR with level gauge with agitator Motor ,connection shaft and mixing blade complete all as specified and as directed by Engineer-in-charge.
Supply and fix in replacement Electric motor Single phase 50 HZ 1/8 HP assy Suitable to mount on decrin mixing tank along with agitator shaft and blade complete all as specified and as directed by Engineer-in-charge.
Supply in replacement connection pipe suitable for connecting to decrin dosing pump to Header( 2 Mtr long 8 mm internal dia) complete all as specified and as directed by Engineer-in-charge.
Supply and fix in replacement of circuit of speed of Dozing pump complete all as specified and as directed by Engineer-in-charge.
Supply and fix in replacement of injector Nozzle of Decrin dozing pump complete all as specified and as directed by Engineer-in-charge.
Supply and fix in replacement of Regulator Knob of dozing pump complete all as specified and as directed by Engineer-in-charge.
Supply and fix in replacement of power cord of dozing pump 2 mtr long plug top 5 AMP 240 volt AC complete all as specified and as directed by Engineer-in-charge.
Supply and fix in replacement of PVC pipe 25mm dia complete all as specified and as directed by Engineer-in-charge.
S&F in replacement of Phase sequence corrector suitable for 5 HP to 7.5 HP pump complete all as specified and as directed by Engineer-in-charge.
Supply and fix in replacement electronic timer ET-100 240/415 complete all as specified and as directed by Engineer-in-charge.
Supply and fix in replacement amp meter 96 Sqmm digital type 0-100 amps complete all as specified and as directed by Engineer-in-charge.
Supply and fix in replacement volt meter 0-500 volts 96 Sqmm digital type complete all as specified and as directed by Engineer-in-charge.
S&F in replacement of dial type FM-1 / QT daily timer one day 24 hrs 240 volt AC complete all as specified and as directed by Engineer-in-charge.
S&F in repair CT 30/5 to 200/5 complete all as specified and as directed by Engineer-in-charge.
S&F in repair indicating light with bulb set of three complete all as specified and as directed by Engineer-in-charge.
S&F in repair PVC copper stranded conductor cable size 1.5 Sqmm multi stranded single core 1100 volt grade complete all as specified and as directed by Engineer-in-charge.
S&F in repair PVC copper stranded conductor cable size 2.5 Sqmm multi stranded single core 1100 volt grade complete all as specified and as directed by Engineer-in-charge.
S&F in repair PVC copper stranded conductor cable size 4 Sqmm multi stranded single core 1100 volt grade complete all as specified and as directed by Engineer-in-charge.
S&F in repair PVC copper stranded conductor cable size 6 Sqmm multi stranded single core 1100 volt grade complete all as specified and as directed by Engineer-in-charge.
S&F in repair PVC copper stranded conductor cable size 10 Sqmm multi stranded single core 1100 volt grade complete all as specified and as directed by Engineer-in-charge.
S&F in repair PVC copper stranded conductor cable size 16 Sqmm multi stranded single core 1100 volt grade complete all as specified and as directed by Engineer-in-charge.
S&F in repair PVC sheathed copper cable of size 2.5 Sqmm 3 core,1100 volt grade complete all as specified and as directed by Engineer-in-charge.
S&F in repair PVC sheathed copper cable of size 4.0 Sqmm 3 core,1100 volt grade complete all as specified and as directed by Engineer-in-charge.
S&F in repair PVC sheathed copper cable of size 6.0 Sqmm 3 core,1100 volt grade.complete all as specified and as directed by Engineer-in-charge.
S&F in repair PVC PVC sheathed copper cable of size 10.0 Sqmm 3 core,1100 volt grade complete all as specified and as directed by Engineer-in-charge.
S&F single phase preventor type VSP-D2 415 volts AC complete all as specified and as directed by Engineer-in-charge.
S&F in replacement of 3 pole power contactor with NO / NC block suitable for MNX 50 to 110 complete all as specified and as directed by Engineer-in-charge
S&F in replacement of 3 pole power contactor with NO / NC block suitable for MNX 40 to 45 complete all as specified and as directed by Engineer-in-charge
S&F in replacement of 3 pole power contactor with NO / NC block suitable for MNX 25 to 32 complete all as specified and as directed by Engineer-in-charge
S&F in replacement of 3 pole power contactor with NO / NC block suitable for MNX upto 18 complete all as specified and as directed by Engineer-in-charge
Material and labour for scrubbing out the rust deposited on the surface of centrifugal pump set including its base frame and preparing for applying paint and apply one coat of redoxide primer and two coat of synthetic enamel paint and marking SM /MES Number complete all as specified and as directed by Engineer-in-charge.
Supply and fix in replacement Motor Guard( weather protection cover) made out of 22 gauge GI Sheet suitable upto 3 HP centrifugal mono block/ pressure pumpset with lifting handle and provision of suction /dicharge pipeline Holes complete all as specified and as directed by Engineer-in-charge
Supply and fix in replacement PVC water tank cylendrical shape 3 layer of capacity 5000 LTRS complete all as specified and as directed by Engineer-in-charge
Supply and fix in replacement PVC water tank cylendrical shape 3 layer of capacity 1000 LTRS complete all as specified and as directed by Engineer-in-charge
S&F as in repairs mild steel work in framed work such as valve chamber frame and doors, straps, Ties Clamps, Motor pumpset base etc. and similar work confirming to Fe-290 Gde E-165 and incl painting to surfaces using two coats of metallic primer and a coat of red oxide paint of desired colour complete all as specified and directed.
Supply & fix as in repair Electronic overload relay (Manual reset) relay range 9-15 amps complete all as specified and directed by Engineer-in-charge . .
Supply & fix as in repair Electronic overload relay (Manual reset) relay range 24-40 amp suitable for direct mounting complete all as specified and directed by Engineer-in-charge .
Supply & fix as in repair Electronic overload relay (Manual reset) relay range 45-75amp suitable for directmounting complete all as specified and directed by Engineer-in-charge .
Supply & fix as in repair Electronic overload relay (Manual reset) relay range 66-110 amp suitable for direct mounting complete all as specified and directed by Engineer-in-charge .
S&F in replacement pressure gauge analong type 4" dia 0-14 Kg rating complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in replacement of unserviceable water type cast iron butterfly valve class PN-1.0 of size 50mm dia complete all as specified and as directed by Engineer-in-charge
Supply and fixing in replacement of unserviceable water type cast iron butterfly valve class PN-1.0 of size 80mm dia complete all as specified and as directed by Engineer-in-charge
Supply and fixing in replacement of unserviceable water type cast iron butterfly valve class PN-1.0 of size 150mm dia (OD 160mm) complete all as specified and as directed by Engineer-in-charge
Supply and fixing in replacement of unserviceable water type cast iron butterfly valve class PN-1.0 of size 200mm dia complete all as specified and as directed by Engineer-in-charge
Supply and fixing in replacement of unserviceable MCCB 63 amps 415 volts 4/3 pole 25 KA complete all as specified and as directed by Engineer-in-charge .
Supply & fix MCB SPN of capacity 32 amps complete all as specified and as directed by Engineer-in-charge.
Supply & fix in replacement of MCCB 100 amps 4/3 pole 16 KA 415 volts 50 HZ in LT control panel complete all as specified and as directed by Engineer-in-charge.
Supply & fix in replacement of MCCB 125 amps 4/3 pole 16 KA 415 volts 50 HZ in LT control panel complete all as specified and as directed by Engineer-in-charge.
M&L for replacement of pressure booster pump 1 HP capacity single phase, 50 Hz mounted on roof for boosting water supply to high pressure and connected with existing water supply pipe line including necessary electrical wire and plug top , NRV socket complete all as specified and directed by Engr -in-Charge.
M&L dismantling of unserviceable monoblock / centrifugal pump set with motor of 7.5 to 10 HP, strip opening and taking out rotor carefully, cleaning of rotor and stator, checking the rotor bearings, pump bearings, gaskets, impeller keys, terminal plate, gun metal bushes, cooling fan blades, etc. complete, re-assembling the motor including replacement of studs with nuts, retesting of motor winding and motor for full RPM and full discharge water after coupling with pump set complete all as specified and directed. NOTE- (i). The unit rate quoted by the contractor shall also include the cost of removing the motor and pump set to perform the works mentioned in this item. (ii) Any parts / spares required to make it fully functional shall be measured and paid for separately under relevant item as supply only.
M&L taking out burnt stater winding without damaging stator body of 7.5 HP to 10 HP motor, rewinding the electric motor with super enamelled copper conductor (wire) including providing mica paper etc in stator slots, PVC sleeves, varishing the winding complete all as specified and directed. NOTE:- The unit rate quoted shall also the cost of winding wire and taking to workshop and vise versa.
Supply only shaft of existing material suitable for 7.5 to 10 HP motor complete all as specified and as directed by Engineer-in-charge
Supply only impeller of existing material suitable for 7.5 to 10 HP motor complete all as specified and as directed by Engineer-in-charge
Supply only shaft sleeve of existing material suitable for 7.5 to 10 HP complete all as specified and as directed by Engineer-in-charge
Supply only Cast iron bearing housing for 7.5 to 10 HP motor complete all as specified and as directed by Engineer-in-charge
Supply only Gland assembly suitable for 7.5 to 10 HP motor complete all as specified and as directed by Engineer-in-charge
Supply only throat bush suitable for 7.5 to 10 HP motor complete all as specified and as directed by Engineer-in-charge
Supply only mechanical seal suitable for 7.5 to 10 HP motor complete all as specified and as directed by Engineer-in-charge
Supply only rotor body suitable for 7.5 to 10 HP complete all as specified and directed by Engineer-in-charge
Supply only shaft coupling suitable for 7.5 to 10 HP pump set complete all as specified and as directed by Engineer-in-charge
Supply only ball bearing for 7.5 HP to 10 HPas per existing complete all as specified and directed by Engineer-in-Charge.
Supply only roller ball bearing for 7.5 HP to 10 HP as per existing complete all as specified and directed by Engineer-in-Charge.
S&F cooling fan for 7.5 to 10 HP induction motor complete all as specified and as directed by Engineer-in-charge
Supply, Installation, testing and Commissioning in replacement of 150 mm dia, single phase, Motor Actuated Butterfly valve with disc material SS-304, Stem Material SS-431, Seat EPDW, hand wheel for manual operation and having 05 nos, limit switches for Open/ Close condition, valve position indicator and over ride trip. The housing of actuator should be of Aluminium Dicast. The mounting shall be direct on valve type including necessary excavation earth work, electrical and data cable connection upto required and PCC all as specified and directeted by Engr-in-Charge( Butterfly valve shall be have following specification):- Input Voltage: 230V, AC. Designed line pressure : 16 Kg/Sq cm. In built CPU: Quad core 64 bit ARM Cortex A53 clocked at 1.2GHz. Inbuilt 4 USB 2 ports In built Base Ethernet Port In built Micro SD Port for loading your operating system and storing data. In built wireless LAN and Bluetooth low Energy. The mounting shall be direct type using specialized arrangement of GI Pipe of suitable size/ thickness, complete all as specified and directed.
M&L for attending of water supply complaints for any leakage/blockage in GI pipe lines of size 20mm/25mm bore taking up serviceable/unserviceable GI water pipe lines all fittings/fixtures from trench including supply and laying GI tubing 20mm/25mm bore up to 1 mtr length (max) including necesssary cutting, threading and replacement of unserviceable GI fittings such as GI socket /Nipple/union socket / Tee /reducer etc. of size 20mm/25mm including necessary excavation and earth work up to 1 mtr length to repair the leakage / clearing the blockage in the pipe line and testing on completion on ground/wall/floor/roof of the bldg . (GI fittings shall be measured & paid seperately )
All as per item No 147 here-in before but of size 40mm /50mm bore GI pipe line
All as per item No 147 here-in before but of size 80mm /100mm bore GI pipe line
Cleaning of service tanks of capacity upto 1000 Ltr installed at various places by emptying the tanks, removing scale, dirt and all other foreign materials deposited inside nipples, on side of walls and bottom of the tanks by scrapping and brushing with wire brush , and pressure pump, cleaning with blEaching powder slurry and allowed to dry and then washing the tank with fresh water, Checking and removing Airlock if any on next day after cleaning of the tank, cleaning of vegetation, etc, on surrounding RCC slab where the tank is resting complete all as specified and directed.
All as per item No 150 here in before but Service Tanks of capacity exc 1100 Ltrs and not exc 2000 Ltrs
All as per item No 150 here in before but Service Tanks of capacity exc 2500 Ltrs and not exc 5000 Ltrs
Supply & fixing CI air release valve of dia 100 mm bore dia complete with all accssories incl taking down old unsv air release valve complete all as specified and directed by engr in charge.
Supply, Installation, testing and Commissioning in replacement of 80 mm dia, single phase, Motor Actuated Butterfly valve with disc material SS-304, Stem Material SS-431, Seat EPDW, hand wheel for manual operation and having 05 nos, limit switches for Open/ Close condition, valve position indicator and over ride trip. The housing of actuator should be of Aluminium Dicast. The mounting shall be direct on valve type including necessary excavation earth work, electrical and data cable connection upto required and PCC all as specified and directeted by Engr-in-Charge( Butterfly valve shall be have following specification):- Input Voltage: 230V, AC. Designed line pressure : 16 Kg/Sq cm. In built CPU: Quad core 64 bit ARM Cortex A53 clocked at 1.2GHz. Inbuilt 4 USB 2 ports In built Base Ethernet Port In built Micro SD Port for loading your operating system and storing data. In built wireless LAN and Bluetooth low Energy. The mounting shall be direct type using specialized arrangement of GI Pipe of suitable size/ thickness, complete all as specified and directed.
Taking out existing GI pipe 100mm dia from trenches / walls / roof / floor etc including connection and cleaning for refixing or removal and making good to distrubed area (surface of walls / floor etc) complete all as specified and as directed by Engineer-in-charge
Supply and fixing GI tubing medium grade 100mm dia with all fittings complete laid in trenches / on walls / on ceiling / roof etc incl necessary suitable size of MS clamps / saddling on walls / ceiling etc complete all as specified and as directed by Engineer-in-charge. Make- Jindal / Tata
Taking out existing MS pipe of size 80mm dia from suction/trenches / walls / roof / floor etc complete all as specified and as directed by Engineer-in-charge
All as per above item No 157.00 here-in-before but size 100 mm bore
All as per above item No 157.00 here-in-before but size 150 mm bore
Supplying, laying, jointing, welding & testing MS Pipe of size 80mm dia bore (Heavy duty class 'C'), suitable for welded joints and flanged joints as per site requirement including painting with two coats of anti corrosive paint ,laid in trenches/bore or laying on floors for connections to centrifugal pump sets for suction and to connected outgoing water main pipe line complete including welding works and taking down unserviceable complete all as specified and directed.
All as per above item No 160.00 here-in-before but size 100mm dia
All as per above item No 160.00 here-in-before but size 150mm dia
Supply and fixing and testing of MS Pipe bend of size 150mm dia bore (Heavy duty class 'C'), complete all as specified and as directed by engr in charge.
All as per above item No 163.00 here-in-before but 100mm bore
All as per above item No 163.00 here-in-before but 80mm bore
M & L for cutting MS pipe of any size and welding of flanged on both sides/single side of MS pipe as required on site for connecting the MS pipe/Valve/ Bend/Tee//NRV complete all as specified and directed. Note:- (i) The unit quoted rate included the rate of flanges, cutting,welding work nut,bolts and rubber packing required at site . (ii) MS pipe ,valve,Bend,Tee and NRV will be paid separately under relevant item of the schedule.
Disconnecting and taking out of existing submersible pump set from borewell capacity 3 to 7.5 HP alongwith their column pipe and submersible cable from bore well from any depth complete all as specified and directed by Engineer-in-charge
M& L for Lowering the submersible pump set complete with motor and pump capacity 3 to 7.5 HP in bore well and connecting to existing system complete all as specified and as directed by Engineer-in-charge
Development of borewell by means of high capacity compressor, compressor capacity not less than 620 CFM at 8 Kg/cm2 to its optimum yeild till clear water of potable quality free from sand/silt is obtained including draw down performnce and yeild test of the tubewells complete all as specified and directed by Engr- In- Charge.
Dismantling and strip opening of submersible pump multistage coupled with 3 HP to 7.5 HP submersible motor of any make, segregating of serviceable/unserviceable parts, cleaning of serviceable parts, assembling pump carefully including replacement of worn-out parts, nut and bolts etc., grinding and polishing of shaft for fixing of bushes neckering bushes, making proper size of keys for fixing of impeller etc, getting coupled to the pump with motor, testing for rated discharge of water including transportation to the site for lowering complete all as specified and directed. Note:-- (i). The unit rate quoted above shall be deemed to include only the fixing/ sevicIng of parts.(ii). Any parts / spares required to make it fully functional shall be measured and paid for separately under relevant item as supply only.
M& L for Shifting to local work shop and Rewinding of submersible motor after cutting the burnt winding including cleaning slots and rewinding with equivilent gauge (as retrieved) of insulated copper winding wire and insulating material I.e PVC sleeves insulation paper , wooden sticks, 'O' ring for 3.0 HP to 7.5 HP complete all as specified and as directed by Engineer-in-charge. Note:- Any parts / spares required to make it fully functional shall be measured and paid for separately under relevant item as supply only.
Supply only impeller of existing material suitable for 3 HP to 7.5 HP submersible pump set complete all as specified and as directed by Engineer-in-charge.
Supply only cable guard suitable for 3 HP to 7.5 HP complete all as specified and as directed by Engineer-in-charge.
Supply only bearing base plate suitable for 3 HP to 7.5 HP complete all as specified and as directed by Engineer-in-charge.
Supply & fixing bearing bush for 3 HP to 7.5 HP complete all as specified and as directed by Engineer-in-charge.
Supply only thrust plate suitable for for 3 HP to 7.5 HP submersible motor complete all as specified and as directed by Engineer-in-charge.
Supply only thrust bearing suitable for 3 HP to 7.5 HP submersible motor complete all as specified and as directed by Engineer-in-charge.
Supply only water cable seal suitable for 3 HP to 7.5 HP submersible motor complete all as specified and as directed by Engineer-in-charge.
Supply only Gun metal bearing suitable for 3 HP to 7.5 HP submersible motor complete all as specified and as directed by Engineer-in-charge.
Supply only SS rotor sleeves in for 3 HP to 7.5 HP submersible motor complete all as specified and as directed by Engineer-in-charge.
Supply only coupling suitable for 3 HP to 7.5 HP motor complete all as specified and as directed by Engineer-in-charge.
Supply only bush & sleeves for 3 HP to 7.5 HP motor complete all as specified and as directed by Engineer-in-charge.
Supply only SS pump Shaft for 3 HP to 7.5 HP submersible pump complete all as specified and as directed by Engineer-in-charge.
Supply only housing upper and lower for 3 HP to 7.5 HP submersible complete all as specified and as directed by Engineer-in-charge.
Supply only revolving disc for 3 HP to 7.5 HP submersible complete all as specified and as directed by Engineer-in-charge.
Supply only ball bearings for 3 HP to 7.5 HP submersible motor complete all as specified and as directed by Engineer-in-charge.
S&F in replacement GI column pipe 50mm dia heavy duty class 'C' with GI flanged and drilled at both ends duly threaded and welded of 3 mtr long including bolts, nuts, washers and rubber insertions packing complete all as specified and directed by Engineer-in-charge.
Dismantling of open well submersible pump set fitted in U/G sump of capacity up to 30 HP from water storage tank after disconnecting all electrical connections and refixing the same in its original position after carrying out repairs / rewinding over hauling cleaning of impellers strainers including reconnection of all electrical connections etc complete all as specified and as directed by Engineer-in-charge. Note : - Repairs carried out / parts replaced shall be paid seperately under relevent items
Rewinding of submersible motor 30 HP fitted in U/G sump of any make complete with equivalent gauge of copper winding wire, paper & sleeve, wooden stick, 'O' ring set & including replacement of incl taking out from the under ground sump and relowering the same after repair / replacement complete all as specified and directed by Engineer-in-charge. (Note :- Parts to be replaced under this item shall be paid as supply only)
Supply only thrust plate suitable for 30 HP submersible motor complete all as specified and as directed by Engineer-in-charge.
Supply only thrust bearing suitable for 30 HP submersible motor complete all as specified and as directed by Engineer-in-charge.
Supply only water cable seal suitable for 30 HP submersible motor complete all as specified and as directed by Engineer-in-charge.
Supply only Gun metal bearing suitable for 30 HP submersible motor complete all as specified and as directed by Engineer-in-charge.
Supply only SS rotor sleeves in 30 HP open well submersible motor complete all as specified and as directed by Engineer-in-charge.
Supply only coupling suitable for 30 HP motor complete all as specified and as directed by Engineer-in-charge.
Supply only bush & sleeves for 30 HP motor complete all as specified and as directed by Engineer-in-charge.
Supply only SS pump Shaft for 30 HP open well submersible pump complete all as specified and as directed by Engineer-in-charge.
Supply only in replacement of gun metal impeller with key complete suitable for 30 HP Open well Submersible pump complete all as specified and as directed by Engineer-in-charge.
Supply only housing upper and lower for 30 HP monoblock submersible complete all as specified and as directed by Engineer-in-charge.
Supply only revolving disc for 30 HP monoblock submersible complete all as specified and as directed by Engineer-in-charge.
AMIT ENTERPRISES (BID ID -3328133)
CHOUDHARY ELECTRICAL (BID ID -3319414)
shakti construction (BID ID -3328016)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .