ADDN ALTN OF DSA AT 14 P AND SU AND PROVISION OF STORES 02 NOS UNDER THE STAIRCASE OF CHOC AD WING AT NORTH CAMP AT AF STN BAMRAULI UNDER GE AF BAMRAULI

Taking down chowkats or frames exc. 1.5 Sqm but n.exc 4 Sqm each with shutters (W/o taking off shutters from the frame) and removal to store, complete all as specified and directed.

M&L for 15 mm thick rendering on fair faces of brick/stone masonary or concrete surfaces in CM (1:6) finished even and smooth without usnig extra cement, complete all as specified and directed.

M & L for Preparation of new steel or iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified and directed.

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDMrubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings, complete all as specified and directed by Engr in Charge.

Dismantling of existing floor hearth or wall tilling, complete all as specified and directed

M&L fpr Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including rilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors, complete all as specified and as directed.

M& L for providing cement concrete 25 mm thick type B-0 (1:2:4) using 12.5 mm graded agg as in sub base to flooring, complete all as specified and as directed.

M&L for Kota stone slab for stair case flooring 18-25 mm thick and including 15mm thick cement screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror finshed polishing, complete all as specified and as directed.

S&F of MS hand made sliding bolts, hold fast, hooks for hanging fans, angle cleats for securing purlines to truss and rafters and other small articles, complete all as specified and as directed.

S&F of MS 1.60 mm thick MS plain black sheet in steel gates and similar work, cut to size, holes punched, including round headed screws and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded as required, complete all as specified and as directed.