REPAIRS TO HARD STANDING, FENCING, DRAIN AND MISC B/R ITEMS OF VARIOUS UNITS AT NAGPUR UNDER AGE B/R-II AT KAMPTEE.

Amount

Demolition of cement concrete in ground floor & pavings not exc 15cm thick (below or above ground level) complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in mortar complete all as specified and directed.

M&L for sand filling under floorings/ pavement spread and levelled in layers not exc 15cm thick complete including watering and consolidation complete all as specified and directed.

M&L of machine pressed precast conctete interlocking paver block colour glossy finished rubber pressed any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade ® with grey cement and pigment complete all as specified and directed.

M&L for chequered cement concrete tiles colour glossy finished rubber pressed 30cm x 30 cm x 25mm thick set jointed and pointed in neat cement slurry and pointed in coloured pigment over 20mm cement screed bed in cement mortar (1:6) complete all as specified and directed.

M&L for hardcore of gauge not exc. 63 mm broken stone or boulders deposited, spread and levelled in layers not exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for plain cement concrete (1:4:8) type D2 (using 40mm thick graded stone aggregate) as in sub bases/pavings complete all as specified and directed.

M&L cement concrete (1:2:4) tybe B-1 (using 20mm thick graded stone aggregate) as in floor finish concrete surface even and smooth without using extra cement complete all as specified and directed.

M&L for PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in cills, steps, seismic and other similar bands, plinth courses, lacing courses parapets and railing upto 60cm height, copings, kneelers, bed plates, hold fasts block, filling on pressed steel door/ frame etc complete all as specified and directed.

M&L for forming contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade 'B' complete all as specified and directed.

Demolition of brick work, built in cement mortar or cement lime mortar including all quoins, pillars etc. and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 50m complete all as specified and directed.

Demolition of reinforced cement concrete any description and in any position not otherwise specifically provided for and disposal of unserviceable materials, debris and rubbish off the premises complete all as specified and directed.

M&L for precast RCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in landings, cover slabs, for manholes etc and similar articles with plain faces set in cement mortar (1:4) complete all as specified and directed.

M&L for brick work with fly ash brick old size straight or curved on plan exc 6 m mean radius built in CM (1:6) complete all as specified and as directed.

M&L for PCC (1:3:6) type C1 (using 20mm graded stone aggregate) as in coping including weathering, throating and necessary formwork complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:4) and finished fair and even without using extra cement complete all as specified and directed.

S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending and binding with mild steel (anneal) wire not less than 0.90mm dia complete all as specified and directed.

Excavating in post holes (or similar holes) each not exc 0.5 cum, getting out hard/ dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed.

M&L for cement concrete (1:2:4) type B-2, (Using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

S&F mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes for notching of wire, etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Dismantling fencing wire mesh, any type complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.

Supply only chain link MS galvanisd fencing, any size or type complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brickwork or on concrete surfaces in cement mortar (1:6) and finishing surfaces even and fair complete all as specified and directed.

S&F MS screw bolts of dia 5-10 mm (machine made) with hexagonal or square at one end and screwed the other end or screwed both ends, length of bolt not exc 5cm long complete all as specified and directed.

S&F MS 10mm dia and over round bars in chain link fencing complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10cm in width or grith and applying two coats of synthetic enamel paint over a coat of red oxide paint complete all as specified and directed.

M&L for two coats of white wash on newely plastered surfaces of wall complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for and removing from site of work complete all as specified and directed.

Excavating in trenches, not exc 1.5m wide and not exc 1.5 m in depth; for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc not exc 10 sqm on plan and not exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated material exc. 500m not exc 1.5 km and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed.

Removing building materials etc to a distance of exc 5.0 km under, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.28,584.10]

M/s Jagdish Staioners and General Stores

DE PRETTY AND CO

S D WAGHAMSHI

M/s M.G. Hargunani

M/S L M Chourasia

khushal constructions

MVN Enterprises

PURVA ENTERPRISES

Meet Road Lines

AK CONSTRUCTION

Bidder Name

Meet Road Lines

DE PRETTY AND CO

MVN Enterprises

S D WAGHAMSHI

M/S L M Chourasia

khushal constructions

Devika Constructions

M/s Jagdish Staioners and General Stores

M/s M.G. Hargunani

PURVA ENTERPRISES

AK CONSTRUCTION