REPAIR MAINT OF INTERNAL ELECTRICAL WIRING, REPLACEMENT OF FTL FITTINGS, REWINDING OF CEILING FANS AND EXHAUST FANS AT INS UTKROSH, NTS TEYLERABAD, NAD DOLLYGUNJ, CHOULDARI AND PROTHRAPUR FILTERATION PLANT UNDER AGE E/M NO. II IN GE MINNIEBAY, PORT B

Amount

Taking down carefully copper/aluminium point wiring (light, Fan, socket or power socket) complete, fitting such as switches, ceiling roses, pendants, regulators, Sockets etc removing unserveciable materials and making good to disturbed surface to match with existing finish with plaster and white / colour wash / OBD / CBP complete all as specified and as directed

Taking down carefully copper/aluminium Sub main wiring of size 1.5/2.5/4/6/10/16/25 Sqmm from surface /concealed /existing conduit of any height and removing unserveciable materials and making good to disturbed surface to match with existing finish with plaster and white / colour wash / OBD / CBP complete all as specified and as directed

M&L for point wiring with insulated unsheathed cable 1.5 Sqmm multistranded FR copper conductor 1100 Volt grade IS-694 and drawing in and including steel conduit stove enamelled medium grade suitable dia with fixing materials, sunken terminal MS boxes of 2mm thick, laminated sheet cover 3mm thick and incl provision of earth wire PVC insulated unsheathed 1.5 Sqmm stranded FR copper conductor single core cable connected to common earth dolly along wall/roof as required with 3 mm thick plastic laminated sheet top cover all as directed and specified for the following:-

One light/fan controlled by 5 Amp one way switch

One 3 pin socket out let 5 Amps on the same board

One 3 pin socket out let 5 Amps on the Independent board

One bell / buzzer point controlled by one push button on the Independent board

Additional light point on the same switch circuit

All as per item No 3.00 above but with 2.5 Sqmm single core multi standard copper conductor for one three pin socket 15 Amps on independent board including continuous earth wire PVC insulated 2.5 Sqmm copper solid conductor to common earth dolly complete all as specified and as directed

All as per item No 3.00 above but with 4 Sqmm single core multi standard copper conductor for one three pin socket 20 Amps on independent board/ metal clad socket for AC point including continuous earth wire PVC insulated 4 Sqmm copper solid conductor to common earth dolly complete all as specified and as directed

M&L point wiring with 1.5 Sqmm (nominal area) PVC unsheathed multi stranded copper conductor PVC insulated 1100 volt FRLS grade multi stranded cable drawn through and including PVC casing caping/conduit ISI marked minimum 20mm size and its accessories complete along with 1.5 Sqmm cable but in green colour as continuous earthing wire and connecting to common earth dolly completely concealed ,surface, in walls/ceiling/roofs with and including 1.2 mm thick MS sheet terminal boxes duly fabricated flush mounting in the wall for mounting switches, switch socket combinations fan regulators etc., as required with 3 mm thick plastic laminated sheet top cover all as directed and specified for the following.

One light /fan/bell point controlled by one switch.

One 5 Amps plug point independent board controlled by one switch.

One three pin switch socket 5 Amps plug point on same board.

All as per item No. 11.00 above but with 2.5 Sqmm single core multi standard copper conductor for one three pin socket 5 Amps on independent board including continuous earth wire PVC insulated 2.5 Sqmm copper solid conductor to common earth dolly complete all as specified and as directed.

All as per item No. 11.00 above but with 4 Sqmm single core multi standard copper conductor for one three pin socket 15 Amps on independent board/ metal clad socket for AC point including continuous earth wire PVC insulated 4 Sqmm copper solid conductor to common earth dolly complete all as specified and as directed.

S&F in replacement of switch piano, flush button type, single pole, one way 15 Amps complete all as specified and directed.

S&F in replacement of socket outlet 2-in-1, 3 pin, 5 and 15 amps, flush type complete all as specified and directed.

S&F in replacement of bell push 5 Amps for electric Bell/Buzzer, ding dong AC 230 Volt single pole complete all as specified and directed.

S&F in replacement of electric Bell, ding dong type AC 230 Volt single pole complete all as specified and directed.

S&F in replacement of Switch Piano flush button type, single pole, one way 5 Amp complete all as specified and directed.

S&F in replacement of socket piano flush type 2-in-1 2/3 pin 5 Amps all as specified and directed.

S&F in replacement of sheet metal enclosure with socket plug top, single pole and neutral enclosure with two pin earth plug and socket complete with one MCB SP of capacity 20 to 32 Amps complete all as specified and directed.

S&F in replacement of ceiling rose, surface bakelite 65 mm x 30 mm, 3 terminals complete all as specified and directed.

S&F in replacement of Electronic dimmer type regulator 230 Volt step type complete all as specified and directed.

S&F in replacement of Switch socket combination 06 Amps complete all as specified and directed.

S&F in replacement of Switch socket combination 15 Amps complete all as specified and directed

M&L for sub main wiring complete with 2x1.5 sqmm, single core, multi stranded copper conductor FR PVC insulated and sheathed cable 1100 Volts grade, drawn in PVC Casing Capping in surface /PVC conduit on surface (as required) along walls roofs etc including 1.5 sqmm size pvc insulated unsheathed copper earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed at site. Note for Item No. 28 to 34 :- (i) All three wire/cable(phase, neutral and earth) should be run through for each individual circuit from the DBs. (ii) Two run / four runs of cable and one run / two runs of earth conductor and PVC Conduit be measured as one unit

All as per item No. 28.00 above but 2X2.5 Sqmm and 1X 1.5 Sqmm for Earth wire

All as per item No. 28.00 above but 2X4 Sqmm and 1X 2.5 Sqmm for Earth wire

All as per item No. 28.00 above but 2X 6 Sqmm and 1X 4 Sqmm for Earth wire

All as per item No. 28.00 above but 2X10 Sqmm and 1X 6 Sqmm for Earth wire

All as per item No. 28 above but 4X16 Sqmm and 2X 10 Sqmm for Earth wire

All as per item No. 28.00 but 4X25 Sqmm and 2X 16 Sqmm for Earth wire

S&F in replacement of PVC Gang box with 15 Amp multi purpose Switch and Socket complete all as specified and directed.

All as per item No. 35.00 above but 5 Amps, 5 Pin

S&F in replacement of Cast Iron/pressed steel terminal boxes 60 mm deep, 250mm x 300mm size , 3mm thick rectangular with plastic laminated sheet cover complete all as specified and directed.

All as per Item No. 37.00 above but of size 200X150mm

All as per Item No. 37.00 above but of size 175X100mm

S&F in replacement of MCCB 415 V, 200 Amps, 36KA 3pole with thimbles/lugs and nut,bolts complete all as required at site and directed.

S&F in replacement MCB DP 63 Amps, 240 Volts, 10 kA, 'C' Curve complete all as specified and directed.

S&F in replacement MCB DP 32 Amps, 240 Volts, 10 kA, 'C' Curve complete all as specified and directed.

S&F in replacement MCB DP 40 Amps, 240 Volts, 10 kA, 'C' Curve complete all as specified and directed.

S&F in replacement MCB TP 40 to 63 Amps, 240 Volts, 10 kA, 'C' Curve complete all as specified and directed.

S&F in replacement of load line vertical DB TPN 8 way IP 43 IK-09 with metal double door suitable for MCCB, 4P 36 KA 160 Amp complete all as specified and as directed

S&F in replacement of load line vertical DB TPN 12 way IP-43 IK-09 with metal double door suitable for MCCB, 36 KA 160 Amp complete all as specified and as directed

S&F in replacement of load line vertical DB TPN 4 way IP 43 IK-09 with metal double door suitable for MCCB , 36 KA 100 Amp complete all as specified and as directed

S&F in replacement of double door DB SPN 4 way IP 43-IK-09 with metal double door suitable MCBs complete all as specified and as directed

S&F in replacement of double door DB SPN 12 way IP 43-IK-09 with metal double door suitabl for MCBs complete all as specified and as directed

S&F in replacement of double door DB SPN 8way IP 43-IK-09 with metal double door suitabl for MCBs complete all as specified and as directed

S&F in replacement of MCCB 415 V, 160 Amps, 36KA 3pole with thimbles/lugs and nut,bolts all as required at site and directed.

S&F in replacement of MCCB 125 415 V, 100 Amps, 36KA 3 pole and electric connection with copper/aluminium thimbles all as required at site and all as directed.

S&F in replacement of MCB TPN 6 to 32 Amps, 440 Volts, 10 kA, 'C' Curve complete all as specified and directed.

S&F in replacement of MCB TPN 40 to 63 Amps, 440 Volts, 10 kA, 'C' Curve complete all as specified and directed.

S&F in replacement of MCB Four Pole 100 Amps, 440 Volts, 10 kA, 'C' Curve complete all as specified and directed by.

S&F in replacement of MCB SP 6 to 32 Amps, 440 Volts, 10 kA, 'C' Curve complete all as specified and directed.

S&F in replacement of MCB SP 40 to 63 Amps, 440 Volts, 10 kA, 'C' Curve complete all as specified and directed.

M&L for rewinding of ceiling fan of any make and model of 1200/1400 mm sweep complete with super enamelled copper wire of required size duly varnished with high quality varnish and testing including taking down complete all as specified and directed.

M&L for rewinding of exhaust fan of any type and make of 300mm sweep with super enamelled copper wire of required size covered with high quality varnish complete including taking down, greasing /oiling and testing all specified and directed.

All as per item No. 61.00 above but for 450mm sweep

All as per item No. 61.00 above but for 600mm sweep

M&L for rewinding of cabin fan/wall mounted fan of any make of 450mm sweep with supper enamelled copper wire of required size covered with high quality varnish complete including taking down, greasing /oiling and testing complete all as specified and as directed

M&L for rewinding of Air circulator fan of any make , 600mm sweep with supper enamelled copper wire of required size covered with high quality varnish complete including taking down, greasing /oiling and testing complete all as specified and as durected

S&F in replacement of bearing of ceiling fans of size 1200/1400 mm of any make for proper running and testing complete all as specified and as directed

S&F in replacement of Gun metal bushes for ceiling fan of size 1200/1400 mm including oiling and testing for proper running complete all as specified and as directed

S&F in replacement of rotor shaft of ceiling fans of size 1200/1400 mm sweep complete all as specified and as directed

S&F in replacement of stator for ceiling fan of size 1200/1400 mm sweep complete all as specified and as directed

M&L for painting to ceiling fans of size 1200/1400mm sweep with two coats of synthetic enamel paint by means of suitable spary gun after cleaning and prepairing the surfaces and marking the circular ring line 3 mm thick with golden colour on bottom complete all as specified and as directed

M&L for painting to exhaust fan of size 300/450/600mm sweep with two coats of synthetic enamel paint by means of suitable spary gun after cleaning and prepairing the surfaces complete all as specified and as directed

M&L for painting to wall/pedestal fan of size 300/450/600 sweep with two coats of synthetic enamel paint by means of suitable spary gun after cleaning and prepairing the surfaces complete all as specified and as directed

S&F in replacement exhaust fan single phase 1400 RPM, 300mm sweep heavy duty complete with louver shutter with water proof arragement by fixing ply wood 12 mm thick for fan base including wall cutting of suitable size and making good surface to match with the adjecent surface complete all as specified and as directed (Note : Old fan shall be deposited to MES store yard )

All as per Ser Item No. 73.00 but 450 mm sweep, 900 RPM

All as per Ser Item No 73.00 but 600 mm sweep, 900 RPM

S&F in replacement of ventilating fan 250 mm sweep 230Volts AC with sturdy blades fully plastic body complete sound proof with water proof arragement by fixing ply wood 12 mm thick for fan base including wall cutting of suitable size and making good surface to match with the adjecent surfacecomplete all as specified and as directed (Note : Old fan shall be deposited to MES store yard )

S&F in replacement of wall mounted fan, 400 mm sweep single phase, 230 volts, 50 Hz, fixed on wall with fan clamp/hook, connecting electrically complete all as specified and as directed (Note : Old fan shall be deposited to MES store yard )

S&F in replacement of ceiling fan 1200 mm sweep single phase 230Volt AC, energy saving complete as per manufactrer specification complete all as specified and directed. (Note : Old fan shall be deposited to MES store yard )

S&F in replacement of padestal fan 450 mm sweep single phase 230Volt AC, energy saving complete as per manufactrer specification complete all as specified and directed. (Note : Old fan shall be deposited to MES store yard )

S&F in replacement of bracket assembly of various sizes as required for hanging ceiling fan with rubber shackle nuts, bolts and split pin complete all as specified and directed.

S&F in replacement of condenser 2.5 mfd including fixing of clamps with screws, sleeves etc complete all as specified and directed.

All as per item No. 81.00 above but 3.15 mfd

All as per item No. 81.00 above but 4 mfd

S&F in replacement of ceiling fan blades as per existing pattern (set of three) suitable for 1200/1400 sweep complete all as specified and directed.

S&F in replacement of fan regulator step type electronic 230 volt AC complete all as specified and directed.

S&F in replacement of down rod of ceiling fan made upto 1 mtr long MS pipe medium grade including two coats of synthetic enamel paint over a coat of red oxide primer with bolts/check nuts, washers etc as per existing size and shape of fans incl "U" hook with rubber reel with nut, bolt and washer including drilling, threading complete all as specified and directed.

S&F in replacement of canopy (set of two) for ceiling fans 1200 mm/1400 mm sweep complete all as specified and directed.

S&F in replacement of ceiling fan bottom cover suitable for 1200/1400 mm sweep with existing make and model complete all as specified and directed.

S&F in replacement of ceiling fan top cover suitable for 1200/1400 mm sweep with existing make and model complete all as specified and directed.

S&F in replacement of exhaust fan blade as per existing make and model of size 300 mm sweep complete all as specified and directed.

All as per ser item No. 90.00 above but 450mm sweep

All as per ser item No. 90.00 above but 600mm sweep

S&F in replacement of wall fan blade as per existing make and model of 300 mm/450 mm sweep complete all as specified and directed.

All as per ser item No. 93.00 above but 600mm sweep

S&F replacement of air circulator fan 600 mm sweep single phase AC, energy saving complete as per manufactrer specification. (Note : Old fan shall be deposited to MES store yard )

M&L for earthing complete with Galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 mir deep below GL) with top edge of earth plate not less than 1.5 Mtr below normal ground level, earth plate surrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using Galvanized earth strip 32x6 mm size connected by means of bolts, nuts, check nuts and washer of galvanized iron or steel, provision of 15 mm dia GI pipe medium grade for protection of G1 earth wire and 20mm dia GI pipe medium grade for watering arrangement and PCC (1:3:6) , type CI chamber. MS funnel, wire gauge. 50 mm thick RCC 1:2:4, type B1 earth pit cover with 6 Nos. 8 mm dia high strength deformed steel TMT bars on both ways including necessary excavation in any type of soil, returning, filling in, removal of surplus soil to distance n exc 50 mtr, provision of charcoal and salt complete all as shown in electrical plate No 3 of schedule Part-I.Note: (i) Cost of GI earth wire and GI protection pipe upto 7.5mtr length shall be deemed to be included in the rate quoted for this item. (ii) The unit rate shall also includes for Wire mesh, funnel, excavation, returninng & filling, PCC chamber pit, RCC cover & test point.(iii) PCC pit shall be provided at least 500mm away from the earth pit and not just on the earth pit. (iv) All accessories required for galvanised steel plate electrode required, as specified and as directed.

S&F of security light fitting LED type, 20 Watts 240 Volts luminous shall be more than 2000 lumen, efficiency not less than 100 lm/Watt , accessories complete mounted on 25 mm dia light grade GI pipe bracket 1.0 mtr long bent to shape, mounted on wall,connection complete including taking down old unserviceable CFL/tube light security light fitting complete all as specified and as directed

S&F in repalcement of 1x 20 W LED tube rod suitable for 1x 20W T/L fittings complete all as specified and directed.

S&F in repalcement of 1x 18 W LED tube rod suitable for 1x 18W T/L fittings complete all as specified and directed.

S&F in repalcement of 1x 10 W LED tube rod suitable for 1x 10W T/L fittings complete all as specified and directed.

S&F in replacement of electronic ballast 10W/18W suitable for LED tube light fittings complete all as specified and directed.

S&F in replacement of electronic ballast 20W/33W suitable for LED Tube light fittings complete all as specified and directed.

S&F in replacement electronic driver 24/33W suitable for 24/33 W LED light fittings complete all as specified and directed.

S&F in replacement of electronic driver 15/18W suitable for 15/18 W LED light fittings complete all as specified and directed.

S&F in replacement of electronic driver 9/12W suitable for 9/12 W LED light fittings complete all as specified and directed.

S&F in replacement of LED tube light fitting, 1x18 w, 230v, surface and wall mounted LED batten, 2100lm PC Body tube housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver. & connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified directed.

S & F in replacement of LED tube light fitting, 1x20 w, 230v .Surface and wall mounted LED batten, elegant dia cast for designer homes bright LED source with uniform light out put , 2400 lm , surge protection of 2 KV with wide voltage protection 160-360 V in provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver. & connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified directed.

S & F in replacement of LED tube light fitting, 1x23 w, 230v .Surface and wall mounted LED batten, elegant dia cast aluminium batten for designer homes bright LED source with uniform light out put , 2400 lm , surge protection of 2 KV with wide voltage protection 160-360 V in provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver. & connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified directed.

S & F in replacement of LED mirror light 1x12 w, 230v Helios type fitted on wall/surface complete all as specified and directed.

S & F in replacement of LED light fittings 1x33 w, 230v, 2x2 recessed mounted genaral purpose squre shaped luminaire with high transmitivity diffuser suitable for office application with profiled & flat diffuser fiited on ceiling connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified directed.

S & F in replacement of LED light fittings 1x12 w, 230v down light recessed mounted genaral purpose squre/round shaped luminaire with high transmitivity diffuser suitable for office application with profiled & flat diffuser fiited on ceiling connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified directed.

S&F in replacement of fan regulator 120W, 2 module, modular type as per existing make and model complete all as specified and directed.

S&F in replacement fluorescent tube light fitting. flame proof type FLP-WP of T5 2x36W including integral reflector made of alluminium alloy LM6, with electronic ballast, bipin holders, connector block, etc., and all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor complete all as specified and directed.

S&F in replacement of fluorescent tube light fitting. flame proof type FLP-WP of T5 1X36 W including integral reflector made of alluminium alloy LM6, with electronic ballast, bipin holders, connector block, etc., and all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor complete all as specified and directed.

S&F in replacement of flame proof switch rotary type with termination box in LM6, 16A, single pole 250V complete all as specified and directed.

S&F in replacement flame proof switch socket & plug combined in LM6 cable termination box in LM6, 16A,250V, 2P+earth complete all as specified and directed.

S&F in replacement of aluminium sevice wire 6sqmm 2 core 1100 volts fixed on wall/roof etc complete all as specified and directed.

S&F in replacement of LED lamp 9W, 220V 50HZ complete all as specified and directed.

S&F in replacement of LED lamp 12W, 220V, 50HZ complete all as specified and directed.

S&F in replacement of modular switch one way 6A, 220V 50Hz one moduleas per existing make and model complete all as specified and as directed

S&F in replacement of modular switch one way 16A, 220V 50Hz one module as per existing make and model complete all as specified and as directed

S&F in replacement of modular switch two way 6A, 220V 50Hz one module as per existing make and model complete all as specified and as directed

S&F in replacement of modular bell push 6A, 220V 50Hz one module as per existing make and model complete all as specified and as directed

S&F in replacement of socket, 6A, 2/3 pin combined ,220V 50Hz two module as per existing make and model complete all as specified and as directed

S&F in replacement of socket, 16A, 2/3 pin combined ,220V 50Hz two module as per existing make and model complete all as specified and as directed

S&F in replacement fan regulator step type,120W - 1/2 module ,220V 50Hz as per existing make and model complete all as directed at site.

S&F in replacement white cover plate with frame,one module as per existing make and model complete all as directed at site.

S&F in replacement white cover plate with frame, two module as per existing make and model complete all as directed at site.

S&F in replacement white cover plate with frame, three module as per existing make and model complete all as directed at site.

S&F in replacement white cover plate with frame, four module as per existing make and model complete all as directed at site.

S&F in replacement white cover plate with frame, six module as per existing make and model complete all as directed at site.

S&F in replacement metal flux box 1/2 module as per existing make and model complete all as directed at site.

S&F in replacement metal flux box 4 module as per existing make and model complete all as directed at site.

S&F in replacement metal flux box 6 module as per existing make and model complete all as directed at site.

S&F in replacement lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings as per existing make and model complete all as directed at site.

S&F in replacement cable PVC insulated sheathed, unarmoured, round water proof with stranded copper conductor 1100 V grade of size 4 core 10 Sq mm for hanger motor up to 25 Mtr height and necessary clump to move the round cable complete all as specified and as directed

S&F in replacement cable PVC insulated sheathed, unarmoured, round water proof with stranded copper conductor 1100 V grade of size 4 core 16 Sq mm for hanger motor up to 25 Mtr height and necessary clump to move the round cable complete all as specified and as directed

AMR TRADERS

Blue chip consultancy Service

A. R. ELECTRICALS