Provision of Digital Axle Counter in Parallel to DC track Circuit in the Yard of BTE for providing dual detection on Kota Division as per attached BOQ

Supply of powder coated Relay Rack Assembly of Complete With Scaffolding, Fixtures and accessories including MS Bars for fixing of relay plug board, string rods fuse strips with bracket,11 Way Bus Bars with cover and mounting brackets, runway for cable/wires frame base assembly with IDF pillar etc. Siemens type & as per extant practice on W.C.Rly. Typical part list as per Annexure attached and Rack arrangement as per Sketch No SK -727 and Rack plan as approved by Engineer incharge.

Supply of powder coated Main Cable Termination rack of 1 Way complete with scaffolding, fixtures & accessories including square bars for mounting 8-way terminal / WAGO - make terminal blocks, ladders, string rods, frame, base assembly, insulators, J bolt, nut/bolts & fasteners (Bakelite strips) etc. Siemens type or equivalent & as per extant practice on W.C. Rly. Typical part list as per Annexure-I and rack arrangement shall be as per sketch SK-727. Rack should be made of first class steel powder coated painting and rack manufacturer's certificate should be submitted. All runway for cables / wires shall be provied with PVC sleeve of proper size.

Supply and Installation of OFC joint enclosure and splicing of Optic fiber cable (48 fibres) and testing

Supply of Apparatus Case with miniature 'E' type locks with keys (1 key per 5 location boxes) of ward no. 41 (as per Specification No. IRS: S-30/64 & RDSO Drg. No. SA- 3376/M with latest Amendments) on both the doors, duly painted with red oxide. Single Case as per Drg. No. SK- 783-1/2 & 2/2 with latest alteration.

(ii) Supply of End plate compatible to above screwless terminals. The end plates shall be of different colour than that of disconnect terminal blocks.

(iii) Supply of Din rail of dimension 35mm x 7.5mm, 1 mm thickness, 1Mtr length, slotted compatible to above terminals .

Supply of Resettable fuse, type Polymeric Positive Temperature Coefficient (PPTC) Fuse of make Littlefuse/Fuzetec,/Tyco/ Bourn/Raychem. Rating of fuse will be provided by consignee as per site requirement.

Supply of Hylem sheet resin bonded 10mm thick, grade P3 in standard size of 1.22X1.22 Mtr as per Spec. No. IS 2036 of 1974. (Material inspected by Consignee)

"Supply of Hand held true RMS Digital Multimeter Make: Fluke/Rishabh/Stanlay. Model: Rishabh 616 or superior which can measure voltage in m Volts."

Supply of HDPE duct 40/33 MM as per TEC GR/CDS/08-02 NOV- 04 along with following accessories (to be procured from RCIL approved sources)