REPAIR REPLACEMENT OF UNSERVICEABLE WATER SUPPLY DISTRIBUTION NETWORK IN MARRIED AND OTM ACCN AT MH AJMER LINE AND LANCER LINE AREA AND OTHER ALLIED WORKS IN ARMY AREA JODHPUR

Amount

M&L for excavation in trenches for manually soft/loose soil, n exc 1.5 m wide and n exc 1.5 m in depth; for taking out anytype of water tubing, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil.

M&L for excavation by mechanical means (Hydraulic excavator ) soft/loose soil, n exc 1.5 m wide and n exc 1.5 m in depth; for taking out anytype of water tubing, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil.

Returning, filling in any type of soil including spreading, levelling, watering and well ramming in layers not exc 25 cm.

Removing excavated surplus soil to a distance not exceeding 50M where directed and at a level not exceeding 1.5 M above the starting point.

M&L for taking up 100 mm bore cast iron CI/MS/DI water mains (including all fittings), with spigot and socket ends and lead joints complete all as specified and dirercted. Note:- Any damage to other device like electric supply communication cable, sewage system etc during execution of work shall be rectified and make good by the contractor without any extra cost.

All as Item No 5.00 but for 150 mm bore.

All as Item No 5.00 but for 200 mm bore.

S&F of 100 mm bore DI pipe centrifugally cast of class K-7 with spigot and socket ends suitable for tyton joints including rubber gasket complete all as specified and dirercted. Note:- The cost of dewatering, excavation and earth work as required on site shall be deemed included in the quoted rate of this item.

All as Item No 6.00 but for 150 mm bore.

All as Item No 6.00 but for 200 mm bore.

S&F as in replacement of DI specials such as bends(any type, radius and angle),tappers any type, (straight, bend, increasing, decreasing or double socket etc) tee pieces single branch, 'Y' junction, double branch, cross (all sockets or socket and spigot) collars, caps & plugs of sizes 100 mm to 300mm bore complete all as specified and dirercted.

S&F as in replacement of 80 mm bore CI sluice valve incl new rubber gasket, nuts and bolts etc complete all as specified and dirercted.

All as Item No 8.00 but for 100 mm bore.

All as Item No 8.00 but for 150 mm bore.

All as Item No 8.00 but for 200 mm bore.

All as Item No 8.00 but for 250 mm bore.

S&F as in replacement of 100 mm bore butterfly valve with complete fitting complete all as specified and dirercted.

All as Item No 9.00 but for 150 mm bore.

All as Item No 9.00 but for 200 mm bore.

M&L for rectification of break down maint of 100mm bore raising main line/distribution line by any type of special tools & plants such as JCB & material (such as detachable joints/leak repair clamp suitable for CI/DI fittings, coller/short pieces of pipes or any other fittings as required to minimise the break down time and rectification of the problem as soon as possible. Note:- (i) The cost of excavation, returning, filling and removal of excavated soil and pumping out the water accumulated near pipe line shall be deemed included in the quoted rate of this item. (ii) Rectification work must be start within two hours of intimation from department. Any delay in rectification may be penalised as deemed fit. (iii) T&P and material required for this item shall be provided without any extra cost.

All as Item No 10.00 but for 150 mm bore.

All as Item No 10.00 but for 200 mm bore.

All as Item No 10.00 but for 250 mm bore.

All as Item No 10.00 but for 300 mm bore.

Taking up or down 15mm bore steel tubing alongwith fittings such as tee, bends etc and connections incl removal from site complete all as specified and dirercted.

All as Item No 11.00 but for 20mm bore.

All as Item No 11.00 but for 25mm bore.

All as Item No 11.00 but for 50mm bore.

All as Item No 11.00 but for 80mm bore.

All as Item No 11.00 but for 100mm bore.

S&F of 15mm bore galvanised iron pipe medium grade (ISI marked) with and including medium grade (ISI Marked) fitting concealed or fixed to walls, celling or laid in floors including chase cuttings, making good to distributed surfaces as per existing complete all as specified and dirercted. Note: The cost of cutting/leaving/forming chases, holes etc through walls, floor, plinth protection, roof etc with providing clamp/shaddles/locking/fasteners sundry items etc as required and making good the surface to match as per existing shall be included in quoted rate of this item.

All as Item No 12.00 but for 20mm bore.

All as Item No 12.00 but for 25mm bore.

All as Item No 12.00 but for 50mm bore.

S&F of 15mm bore galvanised iron pipe medium grade (ISI marked) with and including medium grade (ISI Marked) fittings laid in trenches jointed and tested complete all as specified and directed.

All as Item No 13.00 but for 20mm bore.

All as Item No 13.00 but for 25mm bore.

All as Item No 13.00 but for 50mm bore.

All as Item No 13.00 but for 80mm bore.

All as Item No 13.00 but for 100mm bore

S&F as in replacement of 15mm dia gate valve bronze with iron wheel head screwed both ends for iron pipe and fixed complete all as specified & directed.

All as Item No 14.00 but for 20 mm dia

All as Item No 14.00 but for 25 mm dia.

All as Item No 14.00 but for 50 mm dia

Dismantling of stone massonary valve chamber of any size and pattern and at any position and construction of valve chamber of size 1050 x 750 x 1000mm with PCC foundation 1:4:8 type D2 using 40mm graded stone aggregate stone massonary built in cement mortar 1:6 with plastering of 10mm thickness internally and 15mm thickness externally above and below ground level with PCC coping 1:2:4 type B1 using 20mm graded stone aggregate incl frame made of angles iron of size matches with the internal size of the valve chamber and chamber cover made of solid PVC of superior quality and painting the steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer incl necessary earth work, excavation etc complete all as specified and directed.

All as Item No 15.00 but of size 900 x 600 x 1000mm

All as Item No 15.00 but of size 450 x 450 x 600mm

M&L for repairing the leakage of flange end joints of 150 mm bore MS/CI pipe by replacement of rubber gasket, nut bolts etc bailing out the line water as required complete all as specified & directed. Note:- (i) The cost of excavation, returning, filling and removal of excavated soil and pumping out the water accumulated shall be deemed included in the quoted rate of this item. (ii) Rectification work must be start within two hours of intimation from department. Any delay in rectification may be penalised as deemed fit. (iii) T&P and material required for this item shall be provided without any extra cost.

All as Item No 16.00 but for 200 mm bore.

All as Item No 16.00 but for 250 mm bore.

S&F as in replacement of 50mm dia bore CI air release valve with two air outlets, and fixing up in cast iron/ DI water supply mains of size 250/200/150 mm dia with complete fitting inducing inserting flanged tee etc complete all as specified & directed.

Surface dressing not exceeding 15 cm deep complete by removing trees, shrubs, branches of any kind , and cleaning complete all as specified & directed.

M&L for cutting the road (width of road cutting shall be 0.3 to 1.0 Metre) for laying of pipe and repair the same with road repair material (Patch mat) complete including excavation work if required all as specified & directed at site.

S&F as in repair 50mm bore CI foot valve complete all as specified & directed.

All as Item No 20.00 but for 80mm bore.

All as Item No 20.00 but for 100mm bore.

All as Item No 20.00 but for 150mm bore.

S&F as in repair 150mm bore CI Non Return Valve complete all as specified & directed.

All as Item No 21.00 but for 200mm bore.

M&L for Auguring/ Driling /Boring of holes under road, pavement, hard standing by trenchless technology by mannual /machine complete all as specified and directd.

M&L brick work in cm (1:6) as brick pillar for DI pipe line complete all as specified & directed.

Shri Electrical Enterprises

KIRTIMAN ENTERPRISES

Siddhi Vinayak and Co