Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.4 LAccepted-AOC | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹40.1 L+₹1.3 L (3.24%)Rejected-Finance | L2 | Rejected-Finance NOT BEING LOWEST | |
| 3 | L3₹40.9 L+₹2.0 L (5.25%)Rejected-Finance | L3 | Rejected-Finance NOT BEING LOWEST | |
| 4 | L4₹41.9 L+₹3.1 L (7.90%)Rejected-Finance 111 GB MARG YADAV ELECTRIC MARKET LUCKNOW UP 226018 | LUCKNOW | LUCKNOW | UTTAR PRADESH | 226018 | L4 | Rejected-Finance NOT BEING LOWEST | |
| 5 | L5₹43.7 L+₹4.9 L (12.5%)Rejected-Finance | L5 | Rejected-Finance NOT BEING LOWEST |
Tender Value
₹37.6 L
EMD Value
₹75,200
Closing Date
17 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) BKT
GE (AF) BKT, LUCKNONW
ADDN/ALTN SNCOs MESS (BLDG NO-34) AND DSC MESS (BLDG NO-75) AT AF STN BKT
2022_MES_547711_2
8637/BKT/E8
Open Tender
Civil Works
Item Rate
150 days
GE (AF) BKT
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
GE (AF) BKT
₹75,200
Yes
15 Dec 2022
24 Sept 2022
19 Oct 2022
24 Sept 2022
17 Oct 2022
4 Oct 2022
Amount
Demolition of brick work or stone/boulder masonary built in cement mortar of any specification and in any position complete all as specified.
M&L for brick work with sub class 'B' brick (using old size bricks) straight or curved on plain exc 6m mean radius built in CM 1:4 complete all as specified and directed.
Taking down cement plaster including racking out joints hacking for key scrubbing down with water etc on walls and ceiling. complete all as specified and directed
M&L 15mm thick cement plaster on concrete/brick surfaces in CM 1:4 and surfaces finished even & smooth without using extra cement mixed with WPC. Complete all as directed. Note:- WPC will be measured & paid seperately
Supply only integral waterproofing compound
M&L 15mm thick cement plaster on concrete/brick surfaces in CM 1:6 and surfaces finished even & smooth without using extra cement . Complete all as directed.
M&L 5mm thick rendering in cement mortar (1:3) on concrete surfaces, finished even and smooth without using extra cement as in ceiling complete all as specified and directed
M&L preparation of new plastered surfaces of wall including cornices etc and applying two coat of colour wash complete all as specified and directed
M&L preparation of old plastered surfaces of wall including cornices etc by brooming down or steel wire brushing scrapping down smoke soot moulds and efflorescent salt and trading and greasy spots and applying one coat of colour wash complete all as specified and directed
M&L preparation of new plastered surfaces of ceiling and applying two coat of white wash complete all as specified and directed
M&L preparation of old plastered surfaces of ceiling and applying two coat of white wash complete all as specified and directed
M&L complete removal of existing treatment including preparation of old plastered or unplastered walls and applying two coat of oil bound emulsion over & including one coat of primer with one coat of coat of wall care putty approved complete all as specified
M&L preparation of new plastered surfaces of walls and applying two coat of oil bound distemper including one coat of primer over one coat of coat of wall care putty as approved complete all as specified
M&L for preparation of new plastered surfaces by affixing Birla wall care care putty and applying two coats of premium acrylic emulsion paint as paint having VOC less than 50gm/Lit and UV resitance as per IS 15489-2004 alkali and fungal resistance, dirt resitance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43/10 Sqm over and including proming coat of exterior primer applied @ 0.9 litr/10 sqm over new prepare surface complete all as specified including necessary scaffolding at any height arrangement and as directed by Engineer-in-Charge.
M&L for complete removal of existing treatment of RCC/stone/concrete/ brick walls including preparation of scraped surface by removing all depression by affixing wall care putty and applying two coats of premium acrylic emulsion paint having VOC less than 50 gm/litr and UV resitance as per IS 15489-2004 alkali and fungal resitance, dirt resitance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 lit/10 sqm over and including priming coat of exterior primer applied @ 0.9 lit/10sqm over new prepare surface complete all as specified including necessary scaffolding at any height arrangement and as directed by Engr-in- Charge
S&F steel window with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed
Ditto All as per itm No 16 above but without glazing bar complete all as specified and directed
S&F MS Work such as grills, gratings, etc.. with ends of bars shouldered and/ or reveted, or forged into spikes; framed guard bars; framed balusters; walk ways; railings; framework of water tanks, in suporting frame/angle for cub board and smilar work complete all as specified and directed
S&F steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified and directed
S&F 300mm MS ordinary rat rail rod pattern spring including roller and roller plate fixed as in repair including welding to steel frame complete all as speecified and directed
S&F 3mm thick plain sheet glass ordinary quality and glazing with oil putty upto 9.50M height in steel shutter in square n.exc 0.50 Sqm in each pane or any steel frame including glazing clips, complete all as specified and directed
S&F pressed steel frames for doors size 105x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike, plate, etc complete all as specified and directed
S&F pressed steel frames for doors size 165x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike, plate, etc complete all as specified and directed
S&F Flush shutters, solid core construction 40mm thick with block board core and plywood face panels, commercial type on both sides complete all as specifiedand directed
S & F IInd Class HW, 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.20 (a) supplied and fitted to chowkats complete all as specified and directed
M&L preparation of new surfaces of wood or wood based materials of any description not other wise described, over 10cm width or girth and applying two coat of synthetic enamel paint over one coat pink primer complete all as specified and as directed
M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified.
Taking down chowkats or frames (without taking of shutter) exc. 1.5 sqm but not exc 4 sqm each complete all as specified and as directed
Taking down chowkats or frames (without taking of shutter) n.exc. 1.5 sqm each complete all as specified and as directed
Supply and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension (extruded section profile) 42 x 50 mm (tolerance + 1mm) with wall thickness 2.00mm ( + 0.2mm), corners of the door frame jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded & the hinge side vertical the frames re-inforced by galvanised MS tube size 19 x19 mm and 1 mm ( + 0.10mm ) wall thickness and 3 Nos. Stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engr-in-charge.
Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile with wall thickness of 2.3mm ( + 0.2mm). Window profile with hollow section with mitlti chamber, frame 60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc, making arrangement for fixing of hardware EPDM gasket 1.2 + 0.2mm thick galvanised steel Frame (28 mm x 21.5 mm), sash (31mm x 27mm), T profile, frame will be fixed to the wall with 8mm x 100mm long fastners. Hardware (Casement door handle made of zinc alloyed ( white powder coated) corner striker secondary strikers, cylider, door tranmission gear made of mild steel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) and 5mm thick glazing with slelected qulaity glass. (Note :- The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose).
Providing and fixing factory made uPVG white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. of area not exceeding 2.00 sqm each complete all as specified and directed (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose).
S&F 6 mm thick toughened glass in hinged door partition, autometic doors and similar work incl cutting to shape, drilling to holes and required glass film as directed in uPVC frame of door and window complete all as specified and direccted
S&F decorated grill for fixing of uPVC window/ventilator (mesh size 50mmx 50mm x 5mm thick) complete all as specified and directed
S&F solid PVC wall Lining/wall panelling consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed
Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed
Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed
S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet,plain 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified & directed.
S&F pre- painted galvalume aluminum zinc coating GI based plain steel sheet,plain 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed
S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre inluding hanging wire. Complete all as directed.
M&L Non asbestos fibre cement building design 4 mm thick boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as directed.
Dismantling floor hearth or wall tiling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed
M&L Coloured Vitrified Ceramic tiles double charged/ultra charged/GBT 8-10 mm thick (square/ rectangular) light shade polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed
M&L Coloured Vitrified ceramic tiles double charged/ultra charged 8 to 10 mm thick (square/ rectangular) polished, area of each tiles exc. 0.42 Sqm but n.exc. 1.00 Sqm in wall/skirting etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified & directed.
M&L for Non Skid ceramic coloured tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.06 Sqm but n. exc 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM 1:6 all as Specified & directed.
M&L for Glazed ceramic tiles coloured (450x300mm) x 7mm thick, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick backing coat of tiles in CM (1:4) complete all as specified & directed.
M&L 18 to 20 mm thick granite ( of any type ) work (table rubbed and polished) in steps, jambr, pillars window cills, cooking platform and like in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as directed
Demolition of reinforced cement concrete precast of any position and any description not otherwise specifically provided (if reinforced cement concrete ) complete all as specified and directed
S&F TMT bars 10mm dia and over cut to length, bent to shape etc. including cranking and binding with M.S wire not less than 0.9mm dia all as specified and directed.
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded pointed in any mortar.
M&L Machine cut kota stone slab flooring 20-25mm thick laid over & including cement screed base 15mm thick CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete
M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over & including cement screed 10mm thick screed bed in CM 1:4 and jointed with pigment to match the shade of the slab including rubbing and polishing complete
M&L mirror polishing on old marble/granite/kota stone where ever directed to give high gloss finish complete all as directed.
M/L Green Marble work 18 to 20mm thick (table rubbed and polished) in flooring steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of following types
S & F vitreous China wash basin white (flat back or angle back ) type of size 550mmx400 mm including brackets,brass cromium plated waste fittings and pvc wast pipe including cutting for and pinning in ends of bracket fixed in repairs complete all as specified and directed
S&F Soap dish, vitreous China white of size 160x 160x90mmcomplete all as specified and directed
S & F in repair of CP bib tap long shank pattern with flange/cap cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipes 15mm bore complete all as specified and directed
S & F in repair CP pillar tap cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure fancy type with long shanks and fly nuts, screwed for iron pipe 15mm bore complete all as specified and directed
S & F in repair CP stop cock /angle cock cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes 15mm bore complete all as specified and directed
S&F in repair Brass CP mixer 15 mm bore dia for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed
Taking up or down steel tubing and connections, including removal 15mm/20 mm dia of pipe complete all as specified and directed
S&F 15mm bore tubes, 'medium grade', galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified.
S&F 20mm bore tubes, `medium grade', galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified.
Demolition and breaking up drain pipe 150mm bore salt glazed stone ware /AC/PVC pipe complete all as specified
M&L for plain cement concrete (1:4:8) type D2 using 40mm graded stone aggregrate for bedding to drain pipes 150mm internal dia of pipes including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed
S & F 150mm bore (internal dia) salt glazed stone ware pipes grade 'A' laid in trenches on concrete bed with required slope jointed complete all as specified
Cutting into existing manholes for connecting new drains, making good to pipe 150mm internal dia of pipe and rendering cutting out existing benching and forming branch channel in PCC (1:2:4) type B-1, smooth finished all as specified and directed
M&L for 75 mm thick PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) as in plinth protection, surface finished fair and even complete all as specified. (Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3) complete all as specified and directed)
M & L for 75mm thick cement concrete type D-2 1:4:8 (using 40mm graded stone aggregate) as in sub base of floor complete
M&L for PCC 1:3:6 type C-1 using 20mm graded stone for embedding of hold fast/ bed block etc complete all as specified and directed.
S&F chequered cement concrete tiles 20cm x 20cm x 25mm thick set, jointed and pointed in neat cement slury in floors with grey cement and pigment incl screed bed 15mm thick in cement mortar 1:6 and pigment complete all as specified and directed
Dismantling existing roof treatment complete and removal of rubbish off the premises, cleaning surface and preparing to receive new surface complete all as directed.
M&L for cement concrete 1:2:4 type B1 (12.50mm graded aggregate) 40mm thick(Avg thickness) as in roof padding to make proper slope finished cement concrete surface even and smooth without using extra cement complete all as specified and directed
M&L for brushing neat cement slurry with 3.0 Kg./Sqm over roof slab complete all as specified and directed
M&L for water proofing treatment by providing 90-100 micron thick polymeric water proofing membrance over levelling coarse on non-approachable roof (where required) complete all as mentioned below as specified. (i) Average 10mm thick plaster in CM 1:3 mixed with polymer based water proofing compound when levelling coarse is still green. (ii) After the surface is fully dried, it shall be cleaned free from dust and shall be painted with a coat of bituminous primer @ 0.30 ltrs/Sqm. (iii) After primer, the entire roof surface shall be applied with hot, blown bitumen grade 85/25 confirming to IS-702 @ 1.2 Kg/Sqm. (iv) Over hot bitumen polymeric water proofing membrance consisting of 90 to 100 micron thick central core HMHDPE film and standard weight not less than 3 Kg/Sqm shall be laid with 100mm side lap/end lap on prepared surfaces as per manufacturere's instruction and strict supervision of manufacturer's technical representative including as required on verticle surface in parapet. (v) Finally the entire roof surface shall be painted with hot, blown bitumen grade 85/25 confirning o IS-702 @ 1.2 Kg/Sqm. (vi) Laying 40mm thick brick tiles laid over a bedding layer 20 mm thick in CM 1:4. The cement mortar screed shall be mixed with polymer based liquid water proofing additive @ 5% by weight of cement as per manufacturer's specition/instruction and tile joints shall be filled with polymer based cement proof joint filler manufactured by approved specification/instructions and tiles joints shall be filled with 1:3 CM mixed with crude oil as per SSR-2009 (Part-1) complete all as specified and directed.
S & F in repair Vitreous china wash squatting pattern closet 'Orissa pattern' white, size 580 x 440mm with S or P trap, integral foot rests, with and including PVC low flushing cistern 10 litre capacity white with all fittings, fixtures including brackets and 32mm bore PVC flush pipe complete all as specified and directed
S&F Aluminium anodised barrel tower bolts of extruded section 200mm long complete,
M&L for 300mm aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts fixed.
S&F Aluminium handles cast type anodised of 150mm complete.
S & F of factory made Solid uPVC frame (Single Rebated) of size 60mm x 30mm made out of solid uPVC foam with homogenous finecellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) complete all as specified and directed
S & F of factory made soild uPVC profiled panel door shutter 28mm thick with integral skin as frame & 3mm thick high pressure compact laminate on both side of approved colour as infill, with 'C type Gl or 40 x 20 x19 of MS pipe as stiffner & supplying & fixing in frame at site as per specifications & drawing.
M&L butt hinges,extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed 100 mm long, type B-21complete all as specified and directed
S&F door closure hydraulically regulated designation No-3 universal type suitable for door shutter of 851 to 1000mm in width of aluminium body (die cast) weight between 61 to 80 kg in repair complete all as specified and directed
S&F welded steel wire fabric exc 4 kg/Sqm complete to wood or steel members complete all as specified
M&L 25mm thick PCC type B-1 1:2:4 in floor (using 20mm graded stone aggregate) complete all as specified.
S&F 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls laid in trenches or in floors complete all as specified and directed
S&F 110 mm PVC (SWR) bends/shoe any radius complete all as specified and directed
S&F PTMT square grating with side hole 150mm size for trap in repairs complete all as specified and directed
Demolition of cement concrete (unreinforced) n exc 15 cm depth below or above ground level complete all as specified and directed
S&F in repairs Harrison rails, mild steel, chromium plated with fixing brackets, stops, roolers etc complete all as specfied and directed
S&F in repairs Brass Knob 35-40mm dia complete all as specified and directed
S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixed with stainless steel wire staples fixed all as specified and directed
S&F for 18mm thick PVC board of one side prelaminated or digital finished and other side plan white colour to make kitchen cabinet shutter/drawaer front shutters complete with and including all fittings as per specifications complete all as specified and directed. Make : Rajshree/Sintex/sunwin/ M/S Kumar Arch Tech Ltd, M/S H2O soultion complete all as specified and directed
S&F for 18mm thick PVC board both side plain white colour fixed with screws, solvent cement/adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets complete with and inculding all fittings as per specifications, complete all as specified and directed Make : Rajshree/Sintex/sunwin/ M/S Kumar Arch Tech Ltd, M/S H2O soultion complete all as specified and directed
Taking down copper/aluminium point wiring for (light, fan, socket or power) complete including unserviceable fittings such as switches, ceiling rose, holders, sockets,light fittings etc. and making good the disturbed surfaces on wall/floor etc complete all as specified and directed.
Taking down fans/meter/Geyser/Exhaust fan from existing position and removing the same and deposited to MES store and will installed after completion of work.
Taking down ols and unserviceable sub main wiring any size/type /core incl earth wire complete with batten conduit etc all as specified and directed.
Taking down old and unsv sheet metal enclousure ,switch fuse unit,distribution board any type/way/capacity including fuses mcbs ,insulator rccbs etc copmlete after removing all connection and amking good the disturbed surface all as directed by Engr-in-charge.
M&L for point wiring with two single core PVC insulated & PVC unsheathed multi stranded FRLS copper conductor cable of size 1.5 Sqmm 1100 volts grade in and including making good the distrubed surfaces of wall with colour washing/ distemparing the surface to match the existing including concealed conduict of size 20 to 25 mm with all accessories and one single core PVC insulated & PVC sheathed multi stranded copper cable of size 1.5 Sqmm 1100 Volts grade as earth continuity conductor connected to common earth dolly, switch board complete with MS rectangular type box heavy duty for mounting the switch socket etc complete as specified for One light/Fan point controlled by one 5 Amps switch one way complete Make of Cable :- Havells/ Plaza/Finolex/Polycab. Make of PVC conduit :- AKG/ Plaza/ Jindal / Finolex
Ditto all as item No 101 but one 3 pin 5 amps switch socket outlet point on independent board
Ditto all as item No 101 but one 3 pin 5 amps socket point on same board
Ditto all as item No 101 but using 2.5 sqmm conductor for 5 pin 15 Amps switch socket outlet.
S&F switch piano, flush type single pole, one way 5 Amps
S&F switch socket outlet 2 in 1, 5 pin, 5 Amps flush type
S&F switch socket outlet 2 in 1, 5 pin, 15 Amps flush type
S&F socket outlet 5 Amps flush type
M&Lceiling rose,PVC/polycarbonate, isolated body
S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet as required.
S&F Submain wiring with two single core PVC insulated FRLS multistrand copper conductor cable of size 6Sq mm drawn into and including non metallic heavy duty rigid concealed PVC condute not less than 25 mm size ISI marked ivory colour (Pressfit or similar brand ) with all fittings / accessories and 06 Sq mm FRLS multistrand copper conductor cable as continuous earth wire complete. (Note :- for submain wiring: Two run of single core cable and one run of earth wire will be measured as one length and conduit and its accessories is deemed to be included in the unit rate quoted for this items.)
S&F Sheet metal enclosure 4 way TPN double door distribution board when MCB to be used TPN 4 way ,415 volt all as specified and directed
S&F Sheet metal enclosure 4 way SPN double door distribution board when MCB to be used SPN 4 way 240 volt sheet complete all as specified and direct
S&F Sheet metal enclosure 8 way SPN double door distribution board when MCB to be used SPN 8 way 240 volt sheet complete all as specified and direct
S&F MCB TPN 63 Amps 415 volt rupturing cap 10 ka "c" series all as specified and directed.
S&F MCB SPN 32 to 40 Amps 240 volt,50 hz,10 kA breaking capacity :B" curved type complete all as specified and directed.
S&F MCB single pole, 6 to 32 Amps, 240 Volts 50 HZ, 10 KA breaking capacity complete all as directed.Make :- Havells / Legrand / GE / Seimens
S&F sheet metal enclosure, powder coated single pole and neutral with two pin and earth plug and socket (Mettalic) complete with one single pole MCB for 240 volts 20 Amps rating rupturning capacity 10 KA complete fixed as in repairs complete all as specified and directed by Engineer-in-Charge Make Havells/MDS/Legrand
S&F square recessed / surface/suspended mounting LED ceiling light with extruded aluminium housing and milky diffuser of 36 W 2'X 2' panel complete with LED driver 240 V ,50 Hz,3600 lumen 6500 k complete all as specified & approved by EIC. Make :- Philips/Havells/GE/Bajaj
Supply and fix LED light fittings 1x18 watt ,220 voltAC decorative box type with driver holder including 18 watt LED tube light connecting up with 3 core flexible cable copper conductor of suitable size from ceiling rse complete . Make- Philips/Havells/GE/Bajaj
Supply and fix angle holder backlite with 1x9 watt LED bulb includig all fixing accessories and making connection with copper conductor all a s specified and directed. Make- Philips/Havells/GE/Bajaj
Supply and fixing LED security light 45 watt complete with security light bracket (complete with two set of clamp ,nut and bolt) made out of 40 mm medium grade GI pipe bend to shape and with fixing arrangements duly welded (length of pipe should not be less than 1.2 mtrs) and making conection with using 1.5 sqmm PVC insulated multistranded copper conductor two single core cable complete all as specified and directed. Make- Philips/Havells/GE/Bajaj
Earthing complete with galvanised steel earth plate electrode 60cm x 60cmx6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of MES Schedule Part-I connected to earthing point and testing on completion with and including 15 mm bore light grade G.I. protection pipe (upto 7.5 M beyond outer edge of earth pit) PCC pit in mix 1:3:6 type C1 with RCC 1:2:4 type B-1 40 mm thick cover reinforced with 6 mm dia M.S bars 3 Nos both ways with lifting hook made out of 6 mm dia bar, watering arrangement with funnel and wire mesh and 20 mm bore light grade G.I. watering pipe, common salt and charcoal filling, necessary excavation and earth work, complete .
PANKAJ AND BROTHERS
M/s SHIVAM CONSTRUCTIONS
Industrial Traders
M/S SURAJ A POUL
SAI KRIPA BUILDERS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .