REPAIRS TO JOINERY, FLOORING, SUNKEN FLOOR OF KITCHEN / TOILETS, PLASTERING, PLUMBING, SANITARY FITTINGS AND SERVICE TANK CLEANING ETC AT POL AREA, NEW SAFILGUDA JCOs/ORs ACCN AND NEW ASSEY LINE OF AGE B/R (SOUTH) NO.I UNDER GE (SOUTH) SECUNDERABAD

Amount

Taking down chowkats with shutter (without taking off shutters from the frame) n.exc 1.5 Sqm each.compete all as specified and as directed.

All as per item 1 above but area exc. 1.5 Sq.m but not exc. 4 Sq.m each compete all as specified and as directed.

Taking down shutters of any description not exc. 1.00 Sq.m each compete all as specified and as directed.

All as per item 3 above but exc. 1.00 Sq.m and n.exc. 2.00 Sq.m each compete all as specified and as directed.

S & F Solid PVC Door Frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube,supplying and fixing in opening as per manufacturers instructions and as directed .

S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails .M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail ,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement and fixing in the frame as per manufacturers instructions and as directed

S&F of pressed steel frames for doors of size 105x60mm with one or more rebates filled with PCC 1:3:6 type C0 (using 12.5mm graded stone aggregate) including necessary fixing lugs, hinges, lock strike plate etc compete all as specified and as directed.

S&F of pressed steel frames for doors of size 125x60mm with one or more rebates filled with PCC 1:3:6 type C0 (using 12.5mm graded stone aggregate) including necessary fixing lugs, hinges, lock strike plate etc compete all as specified and as directed.

S & F Rolled Mild Steel Framed work as in doors or Gates of angle or other section confirming to Fe 410 - S, with gusset plates, rails braces, etc., complete, drilled for fixing of steel sheeting or other covering and hanging and fixing compete all as specified and as directed.

S & F 2nd class hard wood plain, solid straight chowkats and frame, wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints including treating the back of chowkaths with coal tar black paint compete all as specified and as directed.

S&F mild steel flat iron hold fast of any size and similar articles confirming Fe 290 Grade E-165. compete all as specified and as directed..

M & L for PCC (1:2:4) type B1 using 20mm graded stone aggregate as in lintels blocks, copings, etc including necessary form work compete all as specified and as directed.

M&L for PCC 1:3:6 type C1( using 20mm gradded aggregate) for fixing of holdfast complete all as specified and as directed.

S&F for Factory made 35mm thick 2nd class hard wood, plain framed, paneled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the side of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, 35 mm thick compete all as specified and as directed. by Engr-in-Charge.

S&F second class hard wood 30mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (with sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, cla-use 8.20 (a); supplied and fitted to chowkats complete all as specified and as directed.

S&F 35 mm thick flush shutter ,solid core construction ,with block board core and plywood face panels ,commercial type complete all as specified and as directed.

S & F, steel windows double shutter (one side glazed type and other side gauzed type) with pressed steel frame and side hung shutters including projecting or box type hinges with steel handle & steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.

All as Sl item No 17 above but for single shutters(glazed type)complete all as specified and as directed.

S & F, steel ventilators with pressed steel frame and top hung shutter including projecting/box type hinges with steel handle & steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.

S & F Anodiesed aluminium frame for doors, windows ventilators with one or more rebets including jointing cleats for fixing etc compete all as specified and as directed.

Anodised aluminium door shutter, aluminium section weighing 0.55 Kg/m including necessary jointing cleats, glazing clips rubber neoprene packing, handles 2 nos in each door, hinges, anodised aluminium snap beading screws etc compete all as specified and as directed.

S & F anodised aluminium window and ventilator shutters, sliding type without sash bars aluminium sections weighing 0.55 Kg /m including necessary jointing cleats, glazing chips, rubber packing, anodised aluminium snap beading, screws anodised aluminium fittings such as suitable handle (1No) compete all as specified and as directed.

S & F brass Mortice lock 4 leavers vertical type size 100mm compete all as specified and as directed.

All as per item 23 above but supply and fixed in repairs. compete all as specified and as directed.

S & F in repairs double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty and fixed compete all as specified and as directed.

S & F 100mm long butt hinges extruted alluminium alloy with galvanised Mild steel hinge pin anodised and fixed type B21 compete all as specified and as directed.

S & F 150mm long floor door stopper of aluminium alloy boly and tongue anodised with hard steel spring fixed in floor compete all as specified and as directed.

S & F Aluminium (Die cast ) body door closer hydraulically regulated designation No.3 universal type suitable for door shutters of 851 to 1000mm in width and wt between 61 to 80 kgs. complete all as specified and as directed.

All as per item 28 Above but Supply and fixing in repairs complete all as specified and as directed.

S & F 12 mm thick prelaminated particle board interrior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with glazing clips complete all as specified and as directed.

S & F in repairs 12 mm thick prelaminated particle board interrior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with glazing clips complete all as specified and as directed.

S & F sheet glass ordinary quality 5.5mm thick n exc 0.50sqm in each pane and glazing with oil putty/glazing clips of any description compete all as specified and as directed.

All as per item 32 above but exceeding 0.5sqm in each pane compete all as specified and as directed.

S&F 100mm long MS butt hinges, medium weight cold rolled compete all as specified and as directed.

S&F 75mm long MS butt hinges, medium weight cold rolled compete all as specified and as directed.

S & F 200mm long aluminium anodised Tower bolts of extruted section and fixed complete all as specified and as directed.

S & F 150mm long aluminium anodised Tower bolts of extruted section and fixed complete all as specified and as directed.

S&F 100mm long MS barrel tower bolt, stove enamelled black with bright bolts complete all as specified and as directed.

S & F 150mm long extruded aluminium alloy handles fabricated type anodised complete all as specified and as directed.

S&F 100mm long Alluminium handles compete all as specified and as directed.

S&F 250mm long Aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

S&F MS Framed work such as grills or gratting etc with ends of bars welded of any size and any design all as directed of Fe 290 Grade E-165. compete all as specified and as directed.

S&F Galvanised mild steel wire cloth 0.50mm nominal dia of wire and average width of aperture 1.18mm and fixed with galvanised wire staples compete all as specified and as directed.

S&F in repairs Galvanised mild steel wire cloth 0.50mm nominal dia of wire and average width of aperture 1.18mm fixed with galvanised wire staples compete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed.

S&F 3mm thick sheet glass ordinary quality fixing with oil putty in square not exceeding 0.5 Sqm in each pane.

All as per item 46 above but figured glass, pin head type. compete all as specified and as directed.

M&L Preparatioin of new wooden surfaces of any description over 10CM width or girth and applying two coats of synthetic enamel paint over a coat pink primer. complete all as specified and as directed.

M&L Preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and as directed.

S & F, in repairs 300mm long MS ordinary rat tail rod pattern springs inc. roller & roller plate complete.all as specified and as directed.

Demolition and breaking up drain pipes of100mm dia (salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and as directed.

Demolition and breaking up drain pipes of 75mm dia (salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and as directed.

S&F in repair 75 mm dia, PVC (SWR) floor trap, plain with grating and jointing to waste pipe with solvent cement and fixed in PCC 1:2:4, type B1, (using 20mm grade stone aggregate) complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) bends any radius with access door complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) bends any radius with access door complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) branch piece with access door, single 'Y'/'T' equal or un-equal complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) vent cowl complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to walls, complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to walls, complete all as specified and as directed.

Dismantling water tanks capacity exc 250 ltrs and n.exc 500 ltrs.complete all as specified and as directed.

Dismantling water tanks capacity exc 500 ltrs and n.exc 1000 ltrs.complete all as specified and as directed.

S & F 500 ltrs capacity rotational moulded polyethelene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 20mm bore ball brass valve high pressure with polythene float and fly nut compete all as specified and directed.

S & F 1000 ltrs capacity rotational moulded polyethelene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 20mm bore ball brass valve high pressure with polythene float and fly nut compete all as specified and directed.

S & F in repairs ball brass valves 20mm dia high pressure with polyethelene float and fly nuts complete screwed for iron pipe or brass ferrule and fixed.compete all as specified and directed.

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc for tanks exc 250 and n.exc 500 ltrs. compete all as specified and directed.

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc for tanks exc 500 and n.exc 1000 ltrs.compete all as specified and directed.

S & F 15mm bore tubes medium grade galvanised with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down steel tubing and connections, including cleaning for refixing (or) Removed compelte all as specified and directed.

S & F 20mm bore tubes medium grade galvanised with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down steel tubing and connections, including cleaning for refixing (or) Removed compelte all as specified and as directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth compete all as specified and as directed.

S & F in repairs 15 mm dia, Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed .(Minimum weight 15mm-90gms/20mm-125gms) compete all as specified and as directed.

S&F in repair bib tap 15 mm dia, fancy type, chromium plated, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S & F in repairs 15mm bore Stop valves fancy type chromium plated screwed both ends for iron pipe for unions and fixed with long shank and cup (concealed type), compete all as specified and as directed.

S&F in repairs PVC connection pipe 15 mm size PTMT nut 450 mm long complete all as specified and as directed.

S&F vitreous china wash basin white flat back size 550x400 mm including cutting for and pinning in ends for bracket, fitting with piller tap 15 mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or with out letter 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and waste fittings 32 mm including waste pipe, brass chromium plated with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed

S & F in repairs, vitreous china bowl urinal, white, flat back, size of 465x355x265mm, with grating & union for discharge pipe, complete inc. providing & fixing plugs, bedding urinal against wall in CM 1:2, incl. 60mm long brass screws, pointing around urinal back in cement, compete all as specified and as directed.

S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm compete all as specified and directed.

S & F in repairs, vitreous china wash down water closet pan (pedestal pattern), white, 'P' or 'S' type, inc. 10 litres, PVC flushing cistern, L L, white, with inlet,ball valve, float & brackets, incl. flush pipe, PVC tube 32mm dia. & inc. plastic water closet seat, black, closed pattern with flat bottom, & cover & M S, CP or aluminium hinging device, compete all as specified and as directed.

S & F in repairs water closet (squatting pan) complete incl provison of lime concrete bedding ‘Orissa’ pattern, size 580 x 440 mm white, integral foot rests including pvc flushing cistern and flush pipe, PVC connection of 15mm bore and 450mm length compete all as specified and as directed.

S&F in repairs 10 ltrs capacity PVC low level flushing cistern white , with inlet ball valve , float and handle including brackets , Flush pipe of polythylene of low or high density or PVC 32 mm dia , PVC connection 15mm bore with PTMT nuts of length 450mm complete all as specified and as directed.

S&F in repairs Plastic water closet seat, black or white closed pattern, solid type with flat bottom, and cover and mild steel chromium plated hinging device complete all as specified and as directed.

S&F in repairs 125 mm dia brass chromium plated shower rose with swivel joints complete all as specified and as directed.

S&F in Repairs 15mm bore Pillar taps fancy type ,CP brass chromium plated screwed down, high pressure, with or without lettered ‘HOT’ or ‘COLD’ with long screwed shanks and fly–nuts, screwed for iron pipe complete all as specified and as directed.

S&F in repair 15 mm bore Stop valves, cp brass chromium plated, fancy type with capstan head screwed down, high pressure, screwed both ends for iron pipe or for unions complete all as specified and as directed.

S&F in repairs angular stop valve cp brass chromium plated screwed for 15 mm bore iron pipe complete all as specified and as directed.

S&F in repairs Tubular Towel rail 20mm dia, D type, 60cm long between flanges of brass chromium plated fixed with and including chromium plated brass screws and wooden / plastic cleats complete all as specified and as directed.

S&F in repairs 32 mm dia waste coupling of PTMT(Half or Full thread) complete all as specified and as directed.

S&F in repairs 32mm dia PVC waste pipe of 1.20 mtr long for wash hand basin of pressure rating 10 kgf/Sqm complete all as specified and as directed.

S&F in repairs 40mm dia PVC waste pipe of 1.20 mtr long for sink of pressure rating 10 kgf/Sqm complete all as specified and as directed.

S&F in repairs for stainless steel plate rack of size 31"x36"x10" of approved make and quality complete all as specified and as directed by Engr-in-Charge. Make ( prayag or equalent)

S&Ff Marble partition of size 600x750x10-12mm th fixing to wall by necessary groove cutting and pointed with white or colour cement to match the existing complete all as specified and as directed.

Demolition of brick work or stone/boulders masonry built in Cement Mortar or cement lime mortar complete all as specified and as directed.

M & L for brick work with sub class 'B' oldsize bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed.

M&L for brick work with sub class `B' brick straight or curved on plan to any radius in half brick thick wall built in CM 1:4, complete all as directed and as specified and as directed

Taking down cement plaster from brick or stone walls etc., including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and as directed.

M & L Rendering 5mm thick in CM 1:4 over 10mm thick CM 1:6 on brick or concrete surfaces including finihsed the surface smooth and even without using extra cement complete all as specified and as directed.

M & L Rendering 15mm thick in CM 1:6 on brick or concrete surfaces including finished the surface smooth and even without using extra cement complete all as specified and as directed.

M & L preparation of newly plastered surfaces and applying three coats of white wash on walls complete all as specified and as directed.

M & L prepatation of new surface and applying two coats of OBD including priming with alkali resistant primming paint complete all as specified and as directed.

M&L preparation of surfaces over a coat of priming paint and applying two coats of cement base paint on new plastered surfaces of wall complete all as specified and as directed

M & L preparation of new surface and applying two coats of colour wash over one coat of white wash on walls complete all as specified and as directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed

M&L for 25 mm thick, PCC 1:2:4, type B0, (using 12.50 mm graded stone aggregate) as in flooring below tiles complete all as specified and as directed.

M&L for 75 mm thick plain cement concrete type D-2 (1:4:8) (40 mm graded stone aggregates) as in sub base complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7 to 8 mm thick square/rectangular area of each tile exceeding 0.06 sq m but not exceeding 0.11 sq m in floors, laid over 15mm thick sand bed in CM 1:6 set and jointed in neat cement slurry and pointed in colour cement to match complete all as directed and as specified and as directed .

M & L Non skid caramic coloured tile 7 to 8 mm thick (square/ rectangular ) area of eachtile exceeding 0.11 sqm but not exceeding 0.18 sqm in floor laid over 15mm thick screed bed in CM 1:6etc set and jointed in neat cement slurry and pointed in white or colour to match for laying floor finishes complete all as specified and as directed.

M & L for Vitrified ceramic tiles light shade 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thick screed bed or bedding in layer of CM 1:6 for laying floor finishes complete all as specified and as directed.

M & L for Vitrified ceramic tiles light shade 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, as in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thick screed bed or bedding in layer of CM 1:4 complete all as specified and as directed.

M & L granite 20mm thick ( of any type) table rubbed & polished in steps , jambs , pillar, widow cills, cooking platforms and laid over 15mm thick screed bed or bedding in layer of CM 1:4 for laying floor finishes incl pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite, complete all as directed and as specified.

M&L Chequred Cement Concrete (design tiles) colour tiles 200 X 200 X 25mm jointed with white cement & pigment and pointed in colour / white cement to match the shade of tile over 20 mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for Plain cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate ) as in kerb stone etc complete all as specified and as directed.

M&L for sand cushion 20 to 30mm thick for fixing of inter locking tiles complete all as specified and directed

M&L for Machine pressed precast concrete interlocking paver block of approved shape and size confirming to IS 15658-2006 of 60 mm thickness with grey cement and no pigment, M-35 Grade of approved colour and design complete all as specified and as directed .

Machine cut kota stone slab flooring 20-25mm thick laid over 15mm thick screed bed or bedding layer in CM 1:6and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing , complete all as specified and as directed. .

M & L Glazed ceramic coloured tiles of size450 x 300 x 7 mm thick as in skirting /dado set and jointed in neat cement slurry and pointed in white or coloured cement to match complete in position laid over 10mm thick screed bed in cm 1:4 complete all as specified and as directed. .

Demolition of un reinforced cement concrete in ground floors and paving n.exc 15 cm thickness (below & above ground level) complete all as specified and as directed.

M&L for75mm thick PCC 1:3:6 type C1 (20mm graded stone aggregate) as in plinth protection laid in panels including finishing the surface smooth and even without using extra cement complete all as specified and as directed.

M&L for prelaminated particle board of 18/19mm thick interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with timber frame work of cupboards book cases etc including taking down of old boarding complete all as specified and as directed.

S&F 100 mm size hasp & staple aluminium anodised fixed with screws complete all as specified and as directed.

S&F continous (Piano) hinges , mild steel, bright finished or electrogalvanised width of flaps in 30mm complete all as specified and as directed.

S&F 40mm dia cupboard knobs fixed with nuts screws and washers of brass polished of approved quality complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherewise specifically provided for as in sunken floor complete all as specified and as directed.

M&L for plain cement concrete 1:5:10 type E-2 (using 40 mm graded stone aggregate) as in floor filling complete all as specified and as directed.

M&L forRendering 15mm thick in CM 1:3 using water proofing compound as per manufacture instruction including finished even and smooth with out using extra cement as in sunken floor complete all as specified and as directed .(Note: WPC will be measured and paid separately)

M&L for providing water proofing felt having glass fibre non woven reinforcement and weighing 3 to 4 kgs /Sqm in 100 mm overlaps both longitudinally and transversely by torch bonding over a coat of hot blown bitumen 85/25 at the rate of 1.2 kgs per sqm as in sunken floor ( bottom and vertical surfaces ) complete all as specified and as directed

Supply only Integral water proofing compound complete all as specified and directed

G.MADAN MOHAN