Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.0 LAccepted-AOC C O EROS PALA EAST LABAN ROAD SHILLONG 793004 | EAST KHASI HILLS | MEGHALAYA | 793004 | L1 | Accepted-AOC L1 BIDDER | |
| 2 | L2₹40.9 L+₹2.4 L (6.34%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN L1 |
Tender Value
₹35.5 L
EMD Value
₹71,000
Closing Date
17 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Shillong
CWE Shillong, SE Falls, Shillong - 793011
SPL REPAIR TO MECH LAUNDARY AT MH SHILLONG UNDER GE SHILLONG
2022_MES_552609_1
8596/SHL/E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
GE Shillong
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE Shillong
₹71,000
Yes
1 Nov 2022
19 Sept 2022
18 Oct 2022
19 Sept 2022
17 Oct 2022
4 Oct 2022
Amount
Dismantling of plain/corrugated steel sheeting any gauge, thickness in roof covering and throwing debries as directed by Engr -in-Charge complete all as specified and directed.
Dismantling boarding any description fixed in any position with nails complete all as specified and directed
Dismantling of floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed
Dismantling wrought Iron or mild steel work of any description not otherwise described complete all as specified and directed.
Demolition of precast concrete block walling built in cement mortar including all quoins, arches, pillars, etc complete all as specified and as directed.
Taking down chowkhat with shutter (without taking off shutter from the frame) area n exc 1.5 sqm each all as specified and as directed.
Taking down chowkhat with shutter (without taking off shutter from the frame) area exc 1.5 sqm but n.exc 4 sqm each all as specified and directed.
Demolition of concrete of any description in any position not otherwise specifically provided for complete all as specified and as directed.
Material and labour for 25mm thick cement concrete using (20mm graded stone aggregate) type B-1 (1:2:4) as in sub base flooring complete all as specified and as directed.
Material and labour for machine cut kota stone slab flooring 18 - 20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab as in floors including rubbing and polishing complete including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.
Material and labour for machine cut kota stone slab flooring 18 - 20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab as in steps, skirting, dado and pillars including rubbing and polishing complete including 10 mm thick rendering in CM 1:4 complete all as specified and directed.
Material and labour for precast cement concrete block masonry with solid blocks exc 10 cm in width with PCC (1:3:6), type C-1, (using 20mm graded stone aggregate) and set in CM(1:6) complete all as specified and directed.
Material and labour for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
Supply and fix pre painted galvalume aluminium zinc coating GI based plain steel sheet as in ridge of 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
Supply and fix second class hard wood boarding 20mm thick fixed with nails in eaves board planed one side with butt joint complete all as specified and directed.
Supply and fix framed work as in doors, or gates of angle or other section with gusset plates, rails, braces, etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including eithe hooks and hinges or steel hanging door fittings (exclusive of steel, sheeting or other covering, running rail and guides) and hanging; also fastening and fixing complete all as specified and directed.
Material and labour for Aluminium frame anodised for doors, windows, ventilators with one or more rebates including joining cleats for fixing etc complete all as specified and as directed
Material and labour for Aluminium anodised window & ventilator shutters sliding type without sash bar, aluminium section weighing 0.55kg/m including necessary jointing cleats, glazing clips, hinges, rubber packing aluminium snap beading screws, handle etc complete all as specified and as directed.
Material and labour for 4.0 mm thick plain sheet glass, ordinary quality in square n exc 0.5 Sqm in each pane complete all as specified and directed
Material and labour for preparation of new steel surfaces and applying two coats of synthetic enamel paint or one coat of red oxide Zinc chromate primer exc 10 cm width or girth complete all as specified and directed.
Material and labour for preparation of old steel surfaces and applying one coat of synthetic enamel paint over a coat of red oxide Zinc chromate primer exc 10 cm width or girth complete all as specified and directed.
Material and Labour for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm. Complete all as specified and directed. Note :- Primer and emulsion application to be carried out through air less spray machine (Only mechanical application allowed except in paint application on bands/chajja/building edges/borders/projections where contrasting color as specified and directed is to be applied).
Material and labour for prepration of old plastered surfaces and applying two coats of distemper over a coat of primer complete all as specified and as directed.
Supply and fix of anodised aluminium alloy curtain rails with fixing brackets, stops, rollers etc complete all as specified and as directed.
Taking down cement plaster on brick or concrete surfaces including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.
Material and labour for rendering 15mm thick in CM (1:4) on fair faces of brickwork (or) concrete surfaces and mixing with WPC @ 3% by weight of cement finished even and fair without using extra cement all as specified and directed. Note :- WPC shall be measured and paid sepeartly.
Supply only Integral water proofing compound
Material and labour for 15mm rendering in cement mortar (1:6) on brick/concrete surfaces finishing the surfaces even and fair without using extra cement complete all as specified and as directed..
Material and labour for perpartion of new surfaces and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/ltr and UV resistance as per IS 15489:2004, Alkali & fungal resitance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm complete all as specified and directed.
Material and labour for preparation of newly plastered surfaces and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.
Material and labour for PCC (1:2:4) type B1 (20 mm graded stone aggregate) as in roof kerbs, sloping padding in roof slab or mud stops, rounded or chamfered on edges complete all as specified and as directed.
Material and labour for repair to damaged roof after complete removal existing treatment including padding, cleaning. the surface using wire brush brooming down and applying the following treatment all as directed in order of precedence as stated:- (i) Rendering 15 mm thick in CM (1:4) on existing roof surface true to level after applying cement slury @ 3Kg/Sqm (ii) Applying one coat of bituminious primer. (Note:- Bituminous primer shall be 'TANK MASTIC' manufactured by M/S STP Ltd or "EMUFALTE" Manufactured by M/s Texsa India Ltd) (iii) Supply and laying 3 mm thick APP based polymeric membrane of approved manufactured with weight not less than 3.00 Kg/Sqm reinforced with non-woven polyester febric weight not less than 150 gms per Sqm. Polymeric membrance shall be taken to a height of 75mm (minimum) and than inserted inside the groove of parapet wall and shall be finished by a membrance flashing. Note:- Laying APP based polymeric membrane shall be done by authorised applicator torch on method as per manufacturers instructions
Supply and fix PVC (SWR) pipes 200mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.
Supply and fix PVC (SWR) 200mm bore bend any radius complete all as specified and as directed.
Material and labour for tie bars with screwed ends, nuts,washers and mild steel plates for walls, chimneys, roofs, arches, etc king rods and straining bolts conforming to FE-290 Gde-S-165 complete all as specified and as directed.
Dismantling and removing existing OH lines ACSR conductors of any size / type from poles / structures etc and removing complete all as specified and as directed.
Dismantling cross arms of MS channels or angle sections, clamps etc complete all as specified and as directed.
Dismantling insulators, any type, any size complete all as specified and as directed.
Excavation in trenches not exceeding 1.5mtr. In depth and not exc 1.5mtr in width and getting out in soft/ loose soil for laying of cable etc complete all as specified and as directed.
Returning ,fillling in trenches,spreading ,levelling,watering and well ramming in layers not exceeding 25cm thick complete all as specified and as directed.
Removing excavated material/ surplus soil and depositing where directed at a distence not exceeding 50mtr.at a level not exceeding 1.5 mtr from starting point complete all as specified and as directed.
Supply lay/spread in trenches , river sand ,clean ,including spreading ,levelling ,punning for laying /cushioning of cables complete all as specified and as directed.
Supply lay in trenches fly ash bricks, old size sub class “B” for cable protection complete all as specified and as directed.
Supply, laying, testing & commissioning in trenches, floors, fix on wall/pole, passing through pipes etc., LT UG cable, 1100 volts grade, PVC/ XLPE insulated, with multistranded aluminium conductors, armoured with galvanised steel wire or tape, gland, lugs etc., of size 70 Sq.mm 3.5 core, confirming to IS specifications complete all as specified and as directed.
Supply and fix in repair MCB DB 4 way vertical sheet metal enclosure TPN 415 volts, 50 Hz, with IP-43 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete all as specified. (Note : MCB SP/TPN shall be measured and paid seperately under relevant item of this schedule) Note : Copper thimble shall be used for connection of cable.
Material and labour for Sub main wiring with two runs of single core 6 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including Cassing capping, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 6 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion inculding taking down old wiring etc complete all as directed. Note: (i) Two runs of 6 sqmm as PVC cable and one run of 6 sqmm as earth wire and one run of PVC casing/ capping shall be measured as one RM.
Supply and fix in repair MCCB TPN, 240 Volts, 100 Amps, 25 kA rupturing capacity 415 Volts with sheet metal enclosure type complete all as specified and directed.
Supply and fix in repair MCCB TPN, 240 Volts, 100 Amps, 10 kA rupturing capacity415 Volts complete all as specified and directed.
Supply and fix in repair MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed.
Supply and fix in repair MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB's complete all as specified and directed.
Supply and fix in repair MCB Distribution board, 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 12 ways, fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed.
Material and labour for Sub main wiring with two runs of single core 4 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including Cassing capping , medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 4 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion inculding taking down old wiring etc complete all as directed.Note: (i) Two runs of 4 sqmm as PVC cable and one run of 4 sqmm as earth wire and one run of PVC casing /capping shall be measured as one RM.
Supply, install, testing and commissioning of outdoor LT distribution feeder pillar IP-65 , CPRI approved of suitable size factory made totally enclosed dust and vermin proof , double leaf shutter in front and single leaf shutter in rear made out of 3.15 mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly painted with powder coated paint and aluminium bus bar 200 amps, 415 volts, 50 Hz 3 phase and 4 wire system with the following items connected as under including supplying and fixing on MS chanel 75mmx40mmx5mm in PCC foundation and PCC work around the panel board witnin two fit area:- INCOMING (a) MCCB 4 pole 315 Amps, 415 V, 36 KA-01 No (b) LCD multifunctioning meter-01 No (c) Phase indicator Lamps (RYB phases)-01 Set (Set of Three) LED Cluster type (d) CTs 100/5 amps-set of three (e) Aluminium bus bar 300 Amps-03 Nos and 150 Amps -01 No. (f) Internal Wiring for panel incl insulators, sleeves etc OUTGOING (a) MCCB 4 pole 160 Amps, 415 V, 25 KA-02 Nos. (b) MCCB 4 Pole 100 Amps, 415 V, 25 KA-02 Nos. (c) MCCB 4 Pole 63 Amps, 415 V, 25 KA-02 Nos.
Material and labour for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth strip 32 x 6mm dia by means of bolts, check nuts and washers, galvanised steel and protected by GI pipe 40 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Electrical Plate No 3 of SSR part -I.
Material and labour, for testing and full servicing of Washing Machine front loading open pocket capacity 50kg with replacement of following spare part and wash room trolly sheet of size 1016x761x863 mm with roller and dry lines trolly size 930x630x80mm with roller. Washing Machine No 1, 2 & 3 including taking down old one complete including small spare part all as specified and directed. Make- BTC (NOTE : All Work shall be done by OEM and produce fitness certificate of machine)
Main Bearing Make- ZKL , SKF , TATA
Counter Bearing Make - ZKL & SKF , TATA
Control panel Make- L&T , MUKAND , BCH
Temperature controller Make- INSTAMES
Drain valve Make- SOCLA , AUDCO , KEYSTONE VALVE
V-Belt Make- GIMPEX , ISCOKON , EMCON
Material and labour for testing and full servicing of Drying tumblar front loading auto timed 50 kg and replacement of following spare part Drying tumblar- 1 & 2. including taking down old one complete including small spare part all as specified and directed. Make- BTC (NOTE : All Work shall be done by OEM and produce fitness certificate of machine)
Steam Readiater Make- CUSTMIZED
Main Bearing Make- ZKL , SKF , TATA 2
Counter Bearing Make- ZKL & SKF , TATA
Temperature controller Make- INSTAMES
Contractor Make- L&T & ELTEK , BCH
Material and labour for testing and full servicing of Hydro extractor M/C top loading 25 Kg and replacement of following spare part Drying tumblar- 1 & 2, including taking down old one complete including small spare part all as specified and directed. Make- BTC (NOTE : All Work shall be done by OEM and produce fitness certificate of machine)
Rubber Buffer Bush Make- CUSTMIZED
Control panel Make- L& T , MUKAND , BCH
Timer Make- DEHL ,OZO , MINILEC
Bearing set Make- ZKL & SKF , TATA
Contractor Make- L & T , SKF , TATA
Material and labour for testing and servicing of flat Work Ironer and replacement of following spare part, including taking down old one complete including small spare part all as specified and directed. (NOTE : All Work shall be done by OEM and produce fitness certificate of machine)
Pading + cloth Make- IMPORTED MAKE
chest rabbing polish buffiing
Material and labour for testing and servicing of steam heater for drying chamber including all necessary spare part / item size 29" x 8.3" x 18.5 : (SS Pipes ) including taking down old one complete including small spare part all as specified and directed. (NOTE : All Work shall be done by OEM and produce fitness certificate of machine)
Material and labour for testing and servicing of full D-scaling (Chemical wash) of Boiler tube for Boiler No. 1 & 2 and replacement of following spare part Burner, Pump ,Inspection, Fire kit, Water Pump, Temperature Controller & indicator lamp etc. including small spare part or Boiler No. 1 & 2 with ( Note : After completion of work Calibration Certification for Boiler Nos. 1 & 2 should be produced to department) including taking down old one complete all as specified and directed. Make- M/s A S Thermofeed Pvt. Ltd (NOTE : All Work shall be done by OEM and produce fitness certificate of machine)
New Burner with photocell, transformer, ignition electrode. Make - ECO FLAME ,BLUE FLAME ,SUNMAX
New coil including asbestor tape, rope, gasket and reactors along with new NRV, diffuser plate with pump. Make- KIRLOSKER , CROM
Full set economizer. Make- BABA THRUM ,MEXOTHERM SUNMAX
New fuel pump along with fuel hose, fuel pressure gauge, steam pressure guage and pressure switch. Make- KIRLOSKER ,CROMPTON , EVEREST
Electrical Control Panel Make- L &T , ELTEK , MUKAND 1
Relay & Breaker, timer, burner sequence controller. Make- L&T,ELTEK , MUKAND 1
Temperature Controller Make- ELTEK , MUKAND 1
indicator lamp Make- L&T,ELTEK , MUKAND
Material and labour for testing and full servicing of Flat Bed Press automatic temp control -1 & 2 and replacement of following spare part Flat Bed Press - 1 & 2, including taking down old one complete including small spare part all as specified and directed. Make- BTC (NOTE : All Work shall be done by OEM and produce fitness certificate of machine)
Synchronous timer Make- L&T , ELTEK , BCH
Contractor Make- L & T , ELTEK , BCH
Cylinder Make-GANPATI , COSTMIZED
Material and labour for testing and full servicing of Calendaring Machine including with (a) Padding for calendar for two rollers of size 11.5mtr length and 2 Mtr width :- 23 Sqmtr, (b) Calendar ribbon guide spools with MS Strips for fixing : As reqd at site :- 24 Nos, (c) Ribbons - 36 Rollers, (d) Cloth covers of rollers 3 mtr X 2 Mtr width - 02 Nos, including taking down old one including small spare part complete all as specified and directed. (NOTE : All Work shall be done by OEM and produce fitness certificate of machine)
Material and labour for testing and full servicing of Auto Cloving M/C capacity 25 Kg ,including replacement of Full Assembly, including taking down old one including small spare part complete all as specified and directed. Make -STERICOX , DTS, MARCO (NOTE : All Work shall be done by OEM and produce fitness certificate of machine)
Material and labour for testing and full servicing of Slucing Machine (Washing / Extractor ) Capacity -12 Kg and replacement of following spare part for Slucing Machine- 1 & 2, including taking down old one including small spare part complete all as specified and directed. Make- BTC (NOTE : All Work shall be done by OEM and produce fitness certificate of machine)
Control Panel Make - L&T , ELTEK , BCH
Main Bearing Make- ZKL & SKF , TATA
Counter Bearing Make -ZKL & SKF , TATA
Material and labour for testing and full servicing of AZR Compressor with 7.5 HP Motor , 10kg/cm2 and replacement of following spare part for AZR Compressor- 1 & 2, including taking down old one including small spare part complete all as specified and directed. Make- M/s Khosla (NOTE : All Work shall be done by OEM and produce fitness certificate of machine)
Piston Make- EVEREST ,POWER HOUSE
Cylinder Make- EVEREST ,POWER HOUSE
Material and labour for testing and full servicing of MS Steam pipe bounded mineral wool sanp on lagging with aluminum etc including taking down old one including small spare part complete all as specified and directed (NOTE : All Work shall be done by OEM and produce fitness certificate of machine)
Material and labour for testing and full servicing of Water softener plant (up flow) hydrion packed with all necessary spare part etc. including taking down old one including small spare part complete all as specified and directed (NOTE : All Work shall be done by OEM and produce fitness certificate of machine)
MS HO Shadap
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .