Construction of Flag Pole in Kadur TMC

Construction of Flag Pole in Kadur TMC

Supply of 1 no of PU Painted 30M Flag Mast in 3 sections suitable for ........mors wind speed (as per IS 875) along with special type dome. Mast shall be suitable for flag size (22ft*33ft), with No of...

Earth work excavation by mechanical means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as pe...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The graniteortraporbasalt crushed graded coarse aggregates and fine aggregates as per relevant ...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Supplying, fitting and placing TMT FE 550 or 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, lapingorwelding joints, ty...

Providing and Filling in foundation with granite or trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour wi...

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand). Page or Item No: 9or5.4 of 2023-24 SR

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kgorm3 and minimum compressive strength of 4.00 Normm2 conforming to IS...

Providing 15mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brickorstone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ...

Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of antiglare clear diffuser with Injection moulded polycar...

Supply of LED pole mounting type post top lantern with pressure die cast luminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection ...

Fabricating, supplying and erection of ... ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements...

Supply and erection of 14 Feet Height Street Light Pole 14 Feet Height Street Light Pole on suitable cement concrete foundation with 2.5 Feet height dia 95 mm cast iron decorative round pedestal as pe...

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 25 Sqmm,...

1.1 kV XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 10 Sqmm, ...

Supplying and fixing angle iron frame work fabricated out of M.S.angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 7...

Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws. 20" x 2...

Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32or63 A three phase 4 wire whole current class-1 Accuracy Energy Meter. (Item SL No 5.35 Page No 19 PWD Ele SR 2023-24

Supply and fixing of 4pole power contactor with NOorNC contacts on existing woodorpanel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 65 A ...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ONorOFF, energy cross-3 with Short circuit breaking cap...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ONorOFF, energy cross-3 with Short circuit breaking cap...

Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers. (Item SL No 5.48 Page No 21 PWD Ele SR 2023-24)

RCC Pole - 9 Mtr Long, 145 Kg WL (Dwg No. BESCOMorGMorQS&Sor02 Dtd 24.11.2018) as per IS-785 (Item SL No 1 1.01Page No 3 ESCOMs SR 2023-24

1.1 kV, LT Aerial Bunched Cable, XLPE insulation confirming to IS-14255: 1995 3x95 + 1x70 + 1x35 Sqmm Street light (Insulated Messenger cum Neutral) (Item SL No 294 42.05 Page No 3 ESCOMs SR 2023-24

LT 4 Pin Cross Arm - GI (Item SL No 16 2.06 Page No 4 ESCOMs SR 2023-24

1.1 kV Polymeric Pin Insulator (Item SL No 16 2.06 Page No 4 ESCOMs SR 2023-24

Digging of Pit for GUY SET Ordinary Soil (Item SL No 25 1.7.1 Page No 44 ESCOMs SR 2023-24

Fixing of GUY Set with break insulator making use of 7or3.15 mm (7or10 SWG) galvanised steel wire with turn buckle and anchoring arrangement as per approved drawing. (Excluding excavation of PIT) (Ite...

Erection of RCCorPSCC Pole of 9 to 10 Mtr long in a pit of 1.8 Mtr depth (Item SL No 30 2.02 Page No 44 ESCOMs SR 2023-24

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC nsulation sheathed suitable for worki...

Fabricating supplying and mounting MS box made out 14 SWG suitable for floor wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover,equipped wi...