KED/56 of 2024-25 Dated 24.07.2024 for Creation of 05 Nos. 100 KVA Sub Stations alongwith HT/LT line at Porth under water Supply Scheme JJM (PHE) in respect of JPDCL Electric Sub Division Kathua of Electric Division Kathua on Turnkey Basis

Amount

Creation of 100KVA Sub Station alongwith HT Line at PORTH (KHABBAL) PANCHAYAT BURTHAIN NORTH under JJM Scheme in respect JPDCL Electric Sub Division Kathua on Turnkey basis by way of supply erection/installation,testing Commissioning etc of following material.

11/0.433kV, 100 KVA, 3-phase Distribution Transformers with Bimetallic Terminal Connectors Energy Level-2, (Al wound ) up to 200 KVA, copper Wound and with LV Cable Box having detachable Aluminium Gland plate.

Gapless Surge Arrestor,9 kV ,10 KA ,LA with polymer housing, Stn. Type

11kV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type

11 kV Horn Gap Fuse Set 3 Phase 200A

70mm² (1Ckt) Single Phase Cable,1.1KV Grade, PVC Insulated Stranded Conductor FRLS type

9 Mtr. Long Pole(ST-410 SP33)

11KV Polymeric composite Disc Insulator 12kV,min failing load 45KN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

GI Channel/Angle/Flat of sizes including clamps for L.A set/G.O set/Horn Gap

Galvinized Nuts and Bolts.

Earthing of substation --Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 25 mm x 3 mm for connection of transformer body,G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover.

11kV Polymeric composite Pin Insulator 12kV, 5kN, Lightening Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

LT Distribution Box for 100KVA DTR with MCCB for incomer & SFU's for outgoing Ckt.

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Wedege connectors /PG clamps

Danger plate with clamps

GI Barbed wire for anti Climbing

3 Ph 4 Wire Trivector meter with CT

Cement bottoming 1:2:4 mix as per REC standards .5 Cum/pole

Painting of poles Red Oxide

Painting of poles Aluminum Paint

Erection of HT line and tapping point on 9 Mtrs. ST poles with ACSR Weasel Conductor at PORTH (KHABBAL) PANCHAYAT BURTHAIN NORTH under JJM Scheme in respect JPDCL Electric Sub Division Kathua on Turnkey basis by way of supply erection/installation,testing Commissioning etc of following material.

9 Mtr. Long Pole(ST-410 SP33)

GI V cross-arm/Horizontal with top Bracket including clamp

GI Channel x-arm includingclaps and braces

30 mm² ACSR Weasel Conductor

11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

Galvanized Nuts and Bolts

Danger Plates with Clamp

Anti Climbing Devices with clamps

Red oxide paint

Aluminium Paint

Cement bottoming 1:2:4 mix as per REC standard 0.5 CUM per pole

Earthing Complete by GI Pipe 40mm dia or GI Rod 20mm ,2.5 mtrs long through GI Strip

Aluminium Jointing Sleeves

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Erection of 11KV Tapping point at PORTH (KHABBAL) PANCHAYAT BURTHAIN NORTH under JJM Scheme in respect JPDCL Electric Sub Division Kathua on Turnkey basis by way of supply erection/installation,testing Commissioning etc of following material.

9 Mtr. Long Pole(ST-410 SP-33 )

GI V cross-arm/Horizontal with top Bracket including clamp

GI Channel/ angle iron including Clamps

11 KV GO , AB switch 3 phase , 3 pole , 200 amp vertically type

30 mm² ACSR Weasel Conductor

PG Clamps for 30mm2 ACSR conductor

11kV Polymeric composite Pin Insulator 12KV 5kN, Lighting Impulse 75KV Positive and 80KVNegative, creepage distance 320mm

11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75KV Positive and 80KV Negative, creepage distance 320mm

Galvanized Nuts and Bolts

Danger Plates with Clamps

Anti-Climbing Device with Clamps

Earthing Complete by GI Pipe 40 mm or GI Rod 20mm 2.5 mtr long through GI Strip.

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Cement bottoming 1:2:4 Mix as per REC Standars

Aluminum Paint

Red oxide paint

Creation of 100KVA Sub Station alongwith HT Line at DHANNI (PORTH) under JJM Scheme in respect JPDCL Electric Sub Division Kathua on Turnkey basis by way of supply erection/installation,testing Commissioning etc of following material.

11/0.433kV, 100 KVA, 3-phase Distribution Transformers with Bimetallic Terminal Connectors Energy Level-2, (Al wound ) up to 200 KVA, copper Wound and with LV Cable Box having detachable Aluminium Gland plate.

Gapless Surge Arrestor,9 kV ,10 KA ,LA with polymer housing, Stn. Type

11kV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type

11 kV Horn Gap Fuse Set 3 Phase 200A

70mm² (1Ckt) Single Phase Cable,1.1K V Grade, PVC Insulated Stranded Conductor FRLS type

9 Mtr. Long Pole(WL-300KG)

11KV Polymeric composite Disc Insulator 12kV,min failing load 45KN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

GI Channel/Angle/Flat of sizes including clamps for L.A set/G.O set/Horn Gap

Galvinized Nuts and Bolts.

Earthing of substation --Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 25 mm x 3 mm for connection of transformer body,G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover.

11kV Polymeric composite Pin Insulator 12kV, 5kN, Lightening Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

LT Distribution Box for 100KVA DTR with MCCB for incomer & SFU's for outgoing Ckt.

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Wedege connectors /PG clamps

Danger plate with clamps

GI Barbed wire for anti Climbing

3 Ph 4 Wire Trivector meter with CT

Cement bottoming 1:2:4 mix as per REC standards .5 Cum/pole

Sundary items like Aluminium Lugs, Jumpers, Binding tape

Erection of HT line on 9 Mtrs. PCC Poles with ACSR Weasel Conductor at DHANNI (PORTH) under JJM Scheme in respect JPDCL Electric Sub Division Kathua on Turnkey basis by way of supply erection/installation,testing Commissioning etc of following material.

9 Mtr. Long Pole(WL-300KG)

GI V cross-arm/Horizontal with top Bracket including clamp

GI Channel x-arm includingclaps and braces

30 mm² ACSR Weasel Conductor

PG Clamps for ACSR weasel conductor

11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

Galvanized Nuts and Bolts

Danger Plates with Clamp

Anti Climbing Devices with clamps

Earthing Complete by GI Pipe 40mm dia or GI Rod 20mm ,2.5 mtrs long through GI Strip

Stone Pad (300mmx300mmx75mm)

Aluminium Jointing Sleeves

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Erection of 11 KV Tapping point at DHANNI (PORTH) under JJM Scheme in respect JPDCL Electric Sub Division Kathua on Turnkey basis by way of supply erection/installation,testing Commissioning etc of following material.

9 Mtr. Long Pole(ST-410 SP-33 )

GI V cross-arm/Horizontal with top Bracket including clamp

GI Channel/ angle iron including Clamps

11 KV GO , AB switch 3 phase , 3 pole , 200 amp vertically type

30 mm² ACSR Weasel Conductor

PG Clamps for 30mm2 ACSR conductor

11kV Polymeric composite Pin Insulator 12KV5kN, Lighting Impulse 75KV Positive and 80KVNegative, creepage distance 320mm

11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75KV Positive and 80KV Negative, creepage distance 320mm

Galvanized Nuts and Bolts

Danger Plates with Clamps

Anti-Climbing Device with Clamps

Earthing Complete by GI Pipe 40 mm or GI Rod 20mm 2.5 mtr long through GI Strip.

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Cement bottoming 1:2:4 Mix as per REC Standars

Aluminum Paint

Red oxide paint

Creation of 100KVA Sub Station alongwith HT Line at PORTH (BROTI) PANCHAYAT BURTHAIN NORTH under JJM Scheme in respect JPDCL Electric Sub Division Kathua on Turnkey basis by way of supply erection/installation,testing Commissioning etc of following material.

11/0.433kV, 100 KVA, 3-phase Distribution Transformers with Bimetallic Terminal Connectors Energy Level-2, (Al wound ) up to 200 KVA, copper Wound and with LV Cable Box having detachable Aluminium Gland plate.

Gapless Surge Arrestor,9 kV ,10 KA ,LA with polymer housing, Stn. Type

11kV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type

11 kV Horn Gap Fuse Set 3 Phase 200A

70mm² (1Ckt) Single Phase Cable,1.1K V Grade, PVC Insulated Stranded Conductor FRLS type

9 Mtr. Long Pole(ST-410 SP33)

11KV Polymeric composite Disc Insulator 12kV,min failing load 45KN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

GI Channel/Angle/Flat of sizes including clamps for L.A set/G.O set/Horn Gap

Galvinized Nuts and Bolts.

Earthing of substation --Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 25 mm x 3 mm for connection of transformer body,G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover.

11kV Polymeric composite Pin Insulator 12kV, 5kN, Lightening Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

LT Distribution Box for 100KVA DTR with MCCB for incomer & SFU's for outgoing Ckt.

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Wedege connectors /PG clamps

Danger plate with clamps

GI Barbed wire for anti Climbing

3 Ph 4 Wire Trivector meter with CT

Cement bottoming 1:2:4 mix as per REC standards .5 Cum/pole

Painting of poles Red Oxide

Painting of poles Aluminum Paint

Erection of HT line on 9 Mtrs. ST poles with ACSR Weasel Conductor at PORTH (BROTI) PANCHAYAT BURTHAIN NORTH under JJM Scheme in respect JPDCL Electric Sub Division Kathua on Turnkey basis by way of supply erection/installation,testing Commissioning etc of following material.

9 Mtr. Long Pole(ST-410 SP33)

GI V cross-arm/Horizontal with top Bracket including clamp

GI Channel x-arm includingclaps and braces

30 mm² ACSR Weasel Conductor

PG Clamps for ACSR weasel conductor

11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

Galvanized Nuts and Bolts

Danger Plates with Clamp

Anti Climbing Devices with clamps

Red oxide paint

Aluminium Paint

Cement bottoming 1:2:4 mix as per REC standard 0.5 CUM per pole

Earthing Complete by GI Pipe 40mm dia or GI Rod 20mm ,2.5 mtrs long through GI Strip

Aluminium Jointing Sleeves

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Erection of 11KV Tapping point at PORTH (BROTI) PANCHAYAT BURTHAIN NORTH under JJM Scheme in respect JPDCL Electric Sub Division Kathua on Turnkey basis by way of supply erection/installation,testing Commissioning etc of following material.

9 Mtr. Long Pole(ST-410 SP-33 )

GI V cross-arm/Horizontal with top Bracket including clamp

GI Channel/ angle iron including Clamps

11 KV GO , AB switch 3 phase , 3 pole , 200 amp vertically type

30 mm² ACSR Weasel Conductor

PG Clamps for 30mm2 ACSR conductor

11kV Polymeric composite Pin Insulator 12KV 5kN, Lighting Impulse 75KV Positive and 80KVNegative, creepage distance 320mm

11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75KV Positive and 80KV Negative, creepage distance 320mm

Galvanized Nuts and Bolts

Danger Plates with Clamps

Anti-Climbing Device with Clamps

Earthing Complete by GI Pipe 40 mm or GI Rod 20mm 2.5 mtr long through GI Strip.

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Cement bottoming 1:2:4 Mix as per REC Standars

Aluminum Paint

Red oxide paint

Creation of 100KVA Sub Station alongwith HT Line at CHANGAR (PORTH) under JJM Scheme in respect JPDCL Electric Sub Division Kathua on Turnkey basis by way of supply erection/installation,testing Commissioning etc of following material.

11/0.433kV, 100 KVA, 3-phase Distribution Transformers with Bimetallic Terminal Connectors Energy Level-2, (Al wound ) up to 200 KVA, copper Wound and with LV Cable Box having detachable Aluminium Gland plate.

Gapless Surge Arrestor,9 kV ,10 KA ,LA with polymer housing, Stn. Type

11kV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type

11 kV Horn Gap Fuse Set 3 Phase 200A

70mm² (1Ckt) Single Phase Cable,1.1K V Grade, PVC Insulated Stranded Conductor FRLS type

9 Mtr. Long Pole(ST-410 SP33)

11KV Polymeric composite Disc Insulator 12kV,min failing load 45KN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

GI Channel/Angle/Flat of sizes including clamps for L.A set/G.O set/Horn Gap

Galvinized Nuts and Bolts.

Earthing of substation --Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 25 mm x 3 mm for connection of transformer body,G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover.

11kV Polymeric composite Pin Insulator 12kV, 5kN, Lightening Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

LT Distribution Box for 100KVA DTR with MCCB for incomer & SFU's for outgoing Ckt.

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Wedege connectors /PG clamps

Danger plate with clamps

GI Barbed wire for anti Climbing

3 Ph 4 Wire Trivector meter with CT

Cement bottoming 1:2:4 mix as per REC standards .5 Cum/pole

Painting of poles Red Oxide

Painting of poles Aluminum Paint

Erection of HT line and tapping point on 9 Mtrs. ST Poles with ACSR Weasel Conductor at CHANGAR (PORTH) under JJM Scheme in respect JPDCL Electric Sub Division Kathua on Turnkey basis by way of supply erection/installation,testing Commissioning etc of following material.

9 Mtr. Long Pole(ST-410 SP-33)

GI V cross-arm/Horizontal with top Bracket including clamp

GI Channel x-arm includingclaps and braces

30 mm² ACSR Weasel Conductor

PG Clamps for ACSR weasel conductor

11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

Galvanized Nuts and Bolts

Danger Plates with Clamp

Anti Climbing Devices with clamps

Red oxide paint

Aluminium Paint

Cement bottoming 1:2:4 mix as per REC standard 0.5 CUM per pole

Earthing Complete by GI Pipe 40mm dia or GI Rod 20mm ,2.5 mtrs long through GI Strip

Aluminium Jointing Sleeves

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Erection of 11 KV Tapping point at CHANGAR (PORTH) under JJM Scheme in respect JPDCL Electric Sub Division Kathua on Turnkey basis by way of supply erection/installation,testing Commissioning etc of following material.

9 Mtr. Long Pole(ST-410 SP-33 )

GI V cross-arm/Horizontal with top Bracket including clamp

GI Channel/ angle iron including Clamps

11 KV GO , AB switch 3 phase , 3 pole , 200 amp vertically type

30 mm² ACSR Weasel Conductor

PG Clamps for 30mm2 ACSR conductor

11kV Polymeric composite Pin Insulator 12KV5kN, Lighting Impulse 75KV Positive and 80KVNegative, creepage distance 320mm

11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75KV Positive and 80KV Negative, creepage distance 320mm

Galvanized Nuts and Bolts

Danger Plates with Clamps

Anti-Climbing Device with Clamps

Earthing Complete by GI Pipe 40 mm or GI Rod 20mm 2.5 mtr long through GI Strip.

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Cement bottoming 1:2:4 Mix as per REC Standars

Aluminum Paint

Red oxide paint

Creation of 100KVA Sub Station alongwith HT Line at SHIV NAL (PORTH) under JJM Scheme in respect JPDCL Electric Sub Division Kathua on Turnkey basis by way of supply erection/installation,testing Commissioning etc of following material.

11/0.433kV, 100 KVA, 3-phase Distribution Transformers with Bimetallic Terminal Connectors Energy Level-2, (Al wound ) up to 200 KVA, copper Wound and with LV Cable Box having detachable Aluminium Gland plate.

Gapless Surge Arrestor,9 kV ,10 KA ,LA with polymer housing, Stn. Type

11kV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type

11 kV Horn Gap Fuse Set 3 Phase 200A

70mm² (1Ckt) Single Phase Cable,1.1K V Grade, PVC Insulated Stranded Conductor FRLS type

9 Mtr. Long Pole(WL-300KG)

11KV Polymeric composite Disc Insulator 12kV,min failing load 45KN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

GI Channel/Angle/Flat of sizes including clamps for L.A set/G.O set/Horn Gap

Galvinized Nuts and Bolts.

Earthing of substation --Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 25 mm x 3 mm for connection of transformer body,G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover.

11kV Polymeric composite Pin Insulator 12kV, 5kN, Lightening Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

LT Distribution Box for 100KVA DTR with MCCB for incomer & SFU's for outgoing Ckt.

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Wedege connectors /PG clamps

Danger plate with clamps

GI Barbed wire for anti climbing

3 Ph 4 Wire Trivector meter with CT

Cement bottoming 1:2:4 mix as per REC standards .5 Cum/pole

Sundary items like Aluminium Lugs, Jumpers, Binding tape

Erection of HT line on 9 Mtrs. PCC Poles with ACSR Weasel Conductor at SHIV NAL (PORTH) under JJM Scheme in respect JPDCL Electric Sub Division Kathua on Turnkey basis by way of supply erection/installation,testing Commissioning etc of following material.

9 Mtr. Long Pole(WL-300KG)

GI V cross-arm/Horizontal with top Bracket including clamp

GI Channel x-arm includingclaps and braces

30 mm² ACSR Weasel Conductor

PG Clamps for ACSR weasel conductor

11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

Galvanized Nuts and Bolts

Danger Plates with Clamp

Anti Climbing Devices with clamps

Earthing Complete by GI Pipe 40mm dia or GI Rod 20mm ,2.5 mtrs long through GI Strip

Stone Pad (300mmx300mmx75mm)

Aluminium Jointing Sleeves

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Erection of 11KV Tapping point at SHIV NAL (PORTH) under JJM Scheme in respect JPDCL Electric Sub Division Kathua on Turnkey basis by way of supply erection/installation,testing Commissioning etc of following material.

9 Mtr. Long Pole(ST-410 SP-33 )

GI V cross-arm/Horizontal with top Bracket including clamp

GI Channel/ angle iron including Clamps

11 KV GO , AB switch 3 phase , 3 pole , 200 amp vertically type

30 mm² ACSR Weasel Conductor

PG Clamps for 30mm2 ACSR conductor

11kV Polymeric composite Pin Insulator 12KV5kN, Lighting Impulse 75KV Positive and 80KVNegative, creepage distance 320mm

11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75KV Positive and 80KV Negative, creepage distance 320mm

Galvanized Nuts and Bolts

Danger Plates with Clamps

Anti-Climbing Device with Clamps

Earthing Complete by GI Pipe 40 mm or GI Rod 20mm 2.5 mtr long through GI Strip.

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Cement bottoming 1:2:4 Mix as per REC Standars

Aluminum Paint

Red oxide paint

I.CON ELECTRICALS

SHUSHANT ASSOCIATES