REPAIRS/ REPLACEMENT OF JOINERY, WALL PANELLING, RAILING, ROOFING, FLOORING, FALSE CEILING PLUMBING WORK AND WATER TANK CLEANING ETC IN CERTAIN MES OTM AND MD ACCN IN THE AREA OF AGE B/R -II UNDER GE JUTOGH

Amount

Dismantling of floor hearth or wall tiling incl CM bedding (but not backing) removing serviceable tiles to store & rubbish of the premises complete all as specified and directed.

Demolition of cement concrete in ground floors or pavings exceeding 15cm thickness below or above ground level complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6, type C-2, using 40mm graded crushed stone aggregate as in Sub base , plinth protection & paving finished even & smooth without using extra cement.

M&L for 75mm thick PCC 1:4:8, type D-2, using 40mm graded crushed stone aggregate as in subbase of flooring complete all as specified and directed.

M&L for 20mm thick screed bed in CM (1:6) as in base of floor tiles finished rough to recive floor finishes complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4, type B-0, using 12.5mm graded crushed stone aggregate as in sub base for floors complete all as specified and directed.

M & L for chequered cement concrete tiles rubber moulded pre polished with lacquar finish pre polished glossy finish 30cmx30cmx22-25mm thick, set ,jointed and pointed in neat cement slurry with grey cement and pigment in floors, complete all as specified and directed.

M&L for Non skid ceramic tiles 7-8mm thick coloured (Square/rectangular) joint free area of each tiles exceeding 0.18 sqm but n exc 0.38 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Non skid ceramic tiles 7-8mm thick coloured (Square/rectangular) joint free area of each tiles exceeding 0.18 sqm but n exc 0.38 sqm in verical surface such as dado/lkirting set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for Non skid ceramic tiles 7-8mm thick coloured (Square/rectangular) area of each tiles exceeding 0.06 sqm but n exc 0.11 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Glazed ceramic tiles joint free in vertical surfaces of size 350x250x7mm/ 450x300-350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

S&F vitrified ceramic coloured tiles light shade/double charged/ultra charged 10 mm thick size 600X600 mm as in floors etc set & jointed in neat cement slurry & pointed in white or coloured cement to match complete all as specified and directed.

S&F vitrified ceramic coloured tiles light shade/double charged/ultra charged 10 mm thick size 600X600 mm set & jointed in neat cement slurry & pointed in white or coloured cement to match on vertical surfaces such as skirting, dados and risers to steps over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

S&F 1.5mm thick PVC tiles/sheets, laminated plain coloured, marbled mosaic or mottled finish, homogenious laid with approved rubber based adhesive in floors complete all as specified and as directed (including dismentling of old PVC sheet from floor and removing from site).

Demolition of Stone slabs and tiles of any description laid beded and pointed or thickness in floors, aprons etc. complete all as specified and directed.

M&L for granite (of any type) 20 mm thick one side machine polished in steps, jambs, pillars, window Cills, and top of kitchen platform and top of counter top wash basin etc set and jointed in neat cement slurry and pointed with coloured cement to match including 20mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) including laid over 12mm thick in CM (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for rounding to edges of stone slabs one edge, such as in , cooking platform, and other similar situations complete all as specified and directed.

Taking down cement or cement lime plaster, of any description incl tiling etc complete all as specified and directed.

Demolition of brick or stone masonary built in CM incl all quoins arches, pillars, etc but excluding ashlar facing, dressed stone work and precast concrete block, at any height complete all as specified and directed

M&L for brick work with old size kiln burnt sub class 'B' bricks, straight or curved on plan exc 6 m in mean radius, built in CM 1:6 complete all as specified and directed.

M&L for brick work with sub class 'B' brick in CM 1:4, straight or curved on plan to any radius in half brick thick wall built complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:6 on brick work or concrete surfaces finished even and smooth complete all as specified and directed.

M&L for rendering 15 mm thick on other than fair surfaces of brickwork or concrete surface in CM 1:4 finished even and smooth without using extra cement mixed with and including liquid water proofing compound as per manufacturer instructions complete all as specified and directed.

M&L for preparation of newly plastered surface of wall & applying two coats of oil bound distemper over a one coat of 1-2mm thick birla white putty on walls complete all as specified and directed.

M&L for prepartion of newly plastered surface of wall applying two coats of weather proof paint on external surfaces including a coat of alkali resistant priming paint complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/ slabs/ blankets, any thickness, including cover fillets or GI grid frame work complete all as specified and directed.

M & L 4mm thick non asbestos fibre cement building boards (self design) fixed or laid /inserted to timber/GI/Aluminium frame work with screws in ceiling flat or sloping complete all as specified and directed.

M&L for GI frame work (bottom prepainted and puetyelene coated) of size 605 x 605 mm for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx. 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete all as specified and directed.

M&L for Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

M&L for preparation and applying two coats of creosote on new or old wood surface of any description and girth complete all as specified and directed.

S&F 2nd class hard wood plan fillits, square, rectangular fixed for grid work of wall panelling fixed with screwed in the wall sectional area exc 13 &n exc 25 sq cm complete all as per specified and directed.

M&L for 9mm thick veneered decorative plywood, grade 1(with BWR resin) with decorative face veneers on one side face, fixed with screw or nails to timber frame work complete all as per specified and directed .

Taking down wall panelling and similar work complete all as specified and directed.

S & F Solid PVC Wall Lining consisting of 5mm thick single side prelam wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.

S & F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame complete all as specified and directed.

Demolition of RCC (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided complete all as specified and directed.

M & L for RCC 1:2:4, type B-1, as in columns/beams/slab, landings, chhaja and in shelves and the likecomplete all as per specified and directed .

M&L for Formwork flat rough finished surfaces of concrete to soffits of suspended slabs, roof slabs, landings and similar work complete all as per specified and directed .

S&F TMT bar 10 mm dia and over cut to length bent to shape required including cranking, binding spirally hooking end and binding with MS wire annealed not less than 0.9mm dia complete all as per specified and directed .

Dismantling plain or corrugated steel sheeting, with ridge, gutters, etc, any gauge, and thickness incl Nainital pattern roof covering, fixed with J/L hooks or coach screws complete all as specified and directed.

S & F 0.63 mm thick galvanized, corrugated mild steel sheeting with two corrugation side lap fixed with 'L' or 'J' type hooks and washers in roofs with grade of Zinc coating 120 gm per sqm complete all as specified and directed.

S & F 0.80 mm thick plain galvanized mild steel sheeting in ridges, hips, valley gutters, drip and straight flashing (length and girth as fixed) with grade of Zinc coating 120 gm per sqm, bent to shape as required, fixed with J / L bolts complete all as specified and directed.

S&F pre-engineered galvalume aluminium zinc coating GI based profile steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws complete all as per specified and directed .

S&F pre-engineered galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws complete all as per specified and directed .

S&F 2 mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with L or J-type or cranked hook bolts/self tapping screw complete all as specified and directed .

Dismantling wrought iron or mild steel work of any description not otherwise provided, complete all as per specified and directed .

M & L for preparation of new steel surface of any description over 10cm in width or girth and applying two coath of synthetic enamel paint over a coat of red oxide primer complete all as per specified and directed .

S & F roof trusses (framed) trussed, purlins, posts, crane gantries, rails and fastening and heavy bracket framing (Beam,tee, anfle, channel or flat sections) including distance pieces cleats Fe 410-W(Gde-E- 250) quality-A etc complete all as per specified and directed .

Hacking out old broken glass (any thickness, size, quality or description) from wooden frame or stone, concrete or brick surrounds, glazed with putty or fixed with beadscomplete all as per specified and directed .

S&F sheet glass 5.00 mm thick ordinary quality and glazing with oil putty or wooded bead/aluminium clip built in squares exceeding 0.5 sq.m in each pane, in repair, complete all as per specified and directed .

S&F sheet glass 3.00 mm thick ordinary quality and glazing with oil putty or wooded bead built in squares exceeding 0.5 sq.m in each pane at any height, complete all as per specified and directed .

S&F sheet glass 4.00 mm thick figured glass pin headed type and glazing with oil putty or wooded bead built in squares exceeding 0.5 sq.m in each pane, in repair, complete all as per specified and directed .

Taking down chowkat or frames with shutters withoutout taking off shutters from the frames) n exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkat or frames with shutters without taking off shutters from the frames) exc 1.5 Sqm and n exc 4.0 Sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm each and n exc 2 Sqm each complete all as specified and directed .

S&F for steel rolling shutters,1.25mm thickness of laths without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; eerected in position as indicated, complete; push pull or manual type including taking down complete all as specified and directed.

S&F for collapsible steel gates, top hung, consisting for channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, including taking down complete all as specified and directed.

S&F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed

S&F factory made solid PVC moulded door shutters 28 to 30 mm thick (stiles), with 2,4 or 6 raised panel design with 5mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 5mm prelam PVC Sheet on back face supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. (with wood free EPS)

S&F solid PVC door frame of size 50mmx47mm made out of 5mm wood grain printed PVC sheet used instead of Plain colour PVC Sheet & edges will be painted to match with printed sheet reinforced with MS square tube complete all as specified and directed.

S&F Aluminium anodised powder coated sliding type three track window with shutter and frame including aluminium grill and mosquito proofing net and 5 mm thick tinted glass , size of frame 93.00 x 31.75 x 1.3mm thick for top and sides, 93.00 x 31.75 x 1.2mm thick, bottom and shutter frame 38 x 18 x 1.5mm thick, Aluminium grill 6 mm dia design No. DG-102 make DEDO grill or design No. A-103 make aluminium grill fixed to 50 x 20 x 1.5mm thick including necessary handles, tower bolts etc. complete all as per specified and directed .

S & F aluminum section powder coated of colour as approved door with frame and shutters partially glazing 5.5mm thick one side refelctive glass (tinted glass) and PVC composite board 5mm thick fixed with aluminium clip section door section of aluminium door shutter as under complete and all as specified and directed (I) Frame 100x40x2mm (ii) shutter style 85x44.45x3mm thick section (iii) Top rail 95.25 x44.45x1.7mm thick (iv) middle rail 83.50x44.75x1.7mm thick (v) Bottom rail 114.30X44.15X1.7 thick section (vi) Glazing clip 0.7mm thick (vii) 2 Nos Handle Powder coated Aluminium 200mm long as approved (viii) Tower bolt 9.90mm dia and 200mm long (ix) Mortice lock 100MM 7 LIVER make Godreg (x) Hold fast aluminium 100mm long (xi) 1 Nos Floor door spring each shutters (xii) Reinforced with 2 No 10mm dia MS bar with bolt complete on top and bottom rail of door.

M&L for framed work as in doors frame/chowkats or gates of angle or other section with gusset plates , rails , braces etc complete cutting , drilled and welding for fixing of steel sheeting etc Fe 410 -W (Gde- E- 250) quality-A complete all as per specified and directed .

S & F 35mm thick 2nd class hard wood plain framed, panelled shutters (any numbers of panels), with panels of timbers flat on bith sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and directed.

S & F glazed and skeleton shutters 35mm thick 2nd class Hard wood open rebated and prepared to receive glass, gauge etc. edges of framaing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc. sized of members of shutter with three number of pannels complete all as specified and directed.

S & F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinted tacks or galvanised wire staples fixed in repairs with wooden beading complete all as specified and directed.

M&L for preparation of new wooden surfaces not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F mild steel sliding door bolts plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate 250mm long complete all as specified and directed.

S & F in repairs 300mm ordinary rat rail pattern springs including roller and roller plate complete all as per specified and directed .

S&F aluminium extruded alloy handles fabricated type anodised 150mm long complete all as specified and directed.

S&F butt hinges medium weight cold rolled mild steel powder coated of 100mm size complete all as specified and directed.

S&F Butt hinges 100mm long, extruded aluminium alloy with galvanised mild steel hinge pin, anodisedand fixed, type B-21 complete all as per specified and directed .

S&F aluminium anodized barrel tower bolt of extruded section of size 200mm long complete all as specified and directed.

S&F aluminium anodized barrel tower bolt of extruded section of size 100mm long complete all as specified and directed.

Taking up or down 15mm bore, steel water tubing & connections complete all as specified and directed.

Taking up or down 20 bore, steel water tubing & connections complete all as specified and directed.

Refixing old steel tubing 15mm dia pipe and connections with new fittings in new or old position (walls, ceiling, floors etc.) complete all as per specified and directed .

Refixing old steel tubing 20mm dia pipe and connections with new fittings in new or old position (walls, ceiling, floors etc.) complete all as per specified and directed .

S&F 15mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls, ceiling or laid in floors complete all as per specified and directed .

S&F 20mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls, ceiling or laid in floors of complete all as per specified and directed .

S & F rotational moulded polyethylene water storage tanks 500 ltrs capacity 3 layered (cylindrical Vertical with closed top) hoisted and fixed in position all as specified in SSR Part 1 etc complete including 20mm dia float valve and dismantling of existing tank complete all as per specified and directed .

S & F rotational moulded polyethylene water storage tanks 1000 ltrs capacity 3 layered (cylindrical Vertical with closed top) hoisted and fixed in position all as specified in SSR Part 1 etc complete including 20mm dia float valve and dismentling of existing tank complete all as per specified and directed .

S&F in repair 20mm ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screw for iron pipe minium weight for 210 gms complete all as per specified and directed .

Disconnecting existing tanks, setting aside (or lowering if required) for repair, cleaning, etc. and hoisting if required reconnecting and refixing in position of cap exc. 250 Ltr nexc. 500 ltr complete all as per specified and directed .

S&F 21-22 inch dia galvanised mild steel pan (Tasla/ ghamela) not less than 1mm thick with 04 Nos bolt of 5-6mm dia and 8 Nos nut bolt & washer including fixing on water storage tank as tank cover complete all as per specified and directed .

M&L cleaning and removing all scale and dirt etc. from tanks and from mounts of circulating pipes etc. capacity of tanks exc. 250 Ltr and nexc. 500 ltr complete all as specified and directed . Note : Any damage to Flote valve, pipe etc shall be make good by the contractor.

M&L cleaning and removing all scale and dirt etc. from tanks and from mounts of circulating pipes etc. capacity of tanks exc. 500 Ltr and nexc. 1000 ltr complete all as specified and directed . Note : Any damage to Flote valve, pipe etc shall be make good by the contractor.

S&F in repair 20mm dia stop valve, cast copper alloy, screwed down, high pressure with crutch or btter fly handle screwed both ends for Iron pipe or for unions complete all as specified and directed.

S&F in repairs 15mm dia stop valve, cast copper alloy, screwed down, high pressure with crutch or btter fly handle screwed both ends for Iron pipe or for unions complete all as specified and directed.

S & F in repair 15mm bore concealed stop valve fancy type chromium plated screwed down high pressure with crutch or butter fly handle screwed both ends for unions pipe complete all as per specified and directed .

S & F in repair 15mm bore CP bib tap fancy type long body cast copper alloy with capstan head handle screwed for iron pipe or for brass ferrule complete all as per specified and directed .

S & F in repair 15mm pillar tap CP cast copper alloy with capstan head screwed down high pressure with or without lettered hot or cold with long shank and fly nuts fancy type complete all as per specified and directed .

S& F 15mm size PVC connection pipe with PTMT nuts of length 600mm long complete all as per specified and directed .

S & F in repair 15mm brass CP wall mixer for mixing hot and cold water with hand shower complete all as per specified and directed .

S & F in repair 15mm brass CP basin mixer for mixing hot and cold water complete all as per specified and directed .

S & F in repair of 60 cm long sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 120 mm wide with chromium plated bracket guard and railing complete all as specified and directed.

S & F in repair Brass CP Health faucet with flexible hose pipe complete all as per specified and directed .

S & F in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60 cm long between flanges complete all as per specified and directed .

S&F in repair vitreous china wash down water closet pan padestal pattern white complete all as per specified and directed .

S & F in repair plastic water closet seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as per specified and directed .

S&F in repair vitreous china wash down water closet white 580x440 mm (squatt pan) orissa pattern incl provn of lime concrete bedding, P or S trap with integrated foot rest (excluding flushing cistern) complete all as per specified and directed .

S&F in repair PVC low level flushing cistern 10 Ltr capacity valveless symphonic action type white as approved with ball valve flat back & handle including brackets complete all as per specified and directed .

S&F in repair Wash basins, vitreous china (flat back or angle back type) size 550x400mm white , incl cutting for & pinning in ends of brackets or erecting stand, brackets, CP brass waste coupling and waste pipe of standard length complete all as per specified and directed .

S&F 600x450x5mm thick looking mirror with 6mm thick back ply wood and wooden frame complete including plugging on wall and fixed complete all as per specified and directed .

S&F in repair mild steel pre painted 25 mm dia drapery rods for curtains incl decorative end holders and brackets (wall to wall or flush to wall) for securing curtain rod,complete all as specified and directed .

S & F in repair stainless steel plate rack (utencil rack for kitchen of size 750 x 600 x 250mm and min 0.80 to 1.00 mm thick fixed with stainless steel screw and rawl plug complete all as per specified and directed .

S & F in repair bathroom cabinet mirror of size 350 x 450mm complete all as per specified and directed .

S & F in repair sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastecoupling/waste pipe; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as per specified and directed .

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as per specified and directed .

M&L for painting new or previosly untreated eaves gutter and pipes any description, n. exc 60 cm girth including holder bats, distance pieces, etc. (length measured overbends, branches etc.) complete all as per specified and directed .

M&L for Mild steel sheet eaves gutters, 1mm thick 150mm dia galvanised class 3, half round with rounded edges complete all as per specified and directed .

Demolition of cement concrete unreinforced of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for rendering/ screed bed 15mm thick in CM 1:3 mixed with and including liquid water proofing compound as per manufacturer instructions as in sunken portion complete all as per specified and directed .

M&L preparation of plaster surfaces /RCC roof surfaces and applying one coat of bituminous primer @0.30 Ltr/sqm complete all as per specified and directed .

M&L for applying evenly a tack coat of industrial bitumen 85/25 grade @1.2 Kg per sqm icluding cleaning surfaces etc complete as in sunken portion complete all as per specified and directed .

M & L for PCC 1:4:8, type D-2, using 40mm graded crushed stone aggregate as in filling and mass aggregate complete all as per specified and directed .

M&L for PCC 1:2:4, type B-1, using 20mm graded crushed stone aggregate as in coping, block for hold fast block or similar work and finished the surface with existing and including form work complete all as per specified and directed .

M&L for 15mm thick cement plaster in CM 1:3 on roof slab mixed with and including liquid water proofing compound as per manufacturer instruction's surface shall be finished even and smooth without extra cement complete all as per specified and directed.

M/S Meera Builders

M/S Jaswant Kumar Aggarwal

M/S Shiv Kumar