Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹11.6 LAccepted-Finance VILL JADAINEE HATHNI KI DHATO P O BYCHARI VIA TOTU TEHSIL DISTT SHIMLA HP | SHIMLA | HIMACHAL PRADESH | 171001 | ₹11.6 L | L-1 | Accepted-Finance Found Lowest |
| 2 | L2₹11.8 L+₹18,464 (1.59%)Rejected-Finance | ₹11.8 L+₹18,464 (1.59%) | L2 | Rejected-Finance Higher Amount |
| 3 | L-3₹11.9 L+₹31,760 (2.73%)Rejected-Finance VILL BANOUN PO JABRI TEHSIL DISTT SHIMLA HP | ₹11.9 L+₹31,760 (2.73%) | L-3 | Rejected-Finance Higher Amount |
| 4 | L-4₹12.3 L+₹66,960 (5.76%)Rejected-Finance GROUND FLOOR THAKUR COMPLEX BASANTPUR | BASANTPUR | SHIMLA | HIMACHAL PRADESH | 171018 | ₹12.3 L+₹66,960 (5.76%) | L-4 | Rejected-Finance Higher Amount |
| Sl No | Description | Qty | Unit | NOKH RAM SHARMA L3 | Parmod Kumar Thakur L2 | Rakesh Kumar L4 | DHARAM PAL L1 |
|---|---|---|---|---|---|---|---|
| 1.00 | Excavation in drains and channels etc. in earth work lift up to 1.5 meter stacking the excavated soil not more than 3 meters clear from the edge of excavation and then returning the stacked soil in 15 cm layer in trenches consolidatig each deposited layers by ramming and watering and then disposing of all surlus excavated earth as directed with in a llead of 20 meter in pick jumper work. | 290.4 | Cum | 360 ₹1,04,544 | 335 ₹97,284 Lowest | 360 ₹1,04,544 | 370 ₹1,07,448 |
| 2.00Providing, laying jointing,testing and commissioning at site in treches galvanised miled steel pipe following dia (medium grade) as under confirming to BIS-1239 (part 1) 1990 or latest with upto date amendments capable of with standing required test pressure as prescribed in BIS/ISO code, in random lengths of 5.50 to 5.60 meter. The pipe ends shall be bevelled suitable for butt welding, confirming to IS -816-1969 or latest as applicable (leak proof) in three layers at site of work with welding rods of standard make and all allied accessories what evere required for welding at site, tail pieces, tees, bends and other special manufactured from parent pipes etc. and cutting of pipes whatever required as per site requirment i/c carriage in all leads and lifts and as per directed by Engineer in Charge (earth work in trench to be measured and paid for separatly). | |||||||
| 2.01 | 80 mm dia (M) | 660 | Rmt. | 1,225 ₹8,08,500 | 1,195 ₹7,88,700 | 1,250 ₹8,25,000 | 1,150 ₹7,59,000 Lowest |
| 3.00Providing and fixing MS flanges of following dia to GMS heavy/medium grade tubes conforming to IS: 6392-1971 of table-5, dia and welding with GMS pipe including cost of nuts, bolts washers complete as per IS 1963 specifications including packing sheet 3mm thick minimum and painting with anticorresive paints complete in all leads lifts and carriage of materials at site as directed by Engineer in Charge. | |||||||
| 3.01 | 80 mm dia T-17 | 3 | Pair | 2,300 ₹6,900 | 2,200 ₹6,600 | 3,000 ₹9,000 | 2,000 ₹6,000 Lowest |
| 3.02 | 80 mm dia T-5 | 4 | Pair | 2,100 ₹8,400 | 2,000 ₹8,000 | 2,500 ₹10,000 | 1,900 ₹7,600 Lowest |
| 4.00 | Supply, erection, testing & commissioning of horizontal spindle, horizontal split casing, radial split Single,/Multi stages centrifugal pumps suitable for operation, in parallel of recommended make such as Mather and platt/KSB/Kirloskar/Jyoti/Beacon wear/BS &BE or other approved make conforming to BIS 1520-1980 with upto date amendments read with BIS 9137-1978 or latest edition to handle clear water having charteristics with impellers, casing ring, priming funnels & shaft sleeves of bronze, shaft of stainless steel with cast iron casing of suitable capacity coupled directly through a flexible coupling on a common base plate of cast steel /Mild steel to BHEL /Kirloskar/ NGEF/ Crompton / Siemen/Jyoti /GEC make energy efficient three phase squirrel cage electric induction motor having energy efficiency level IE -2 or higher suitable for operation on the data given below including the cost of all accessories in all leads and lifts and carriage of material of site and as per the direction of Engineer in Charge. | 1 | Set | 2,65,000 - | 2,61,000 - Lowest | 2,80,000 - | 3,00,000 - |
| 4.01Tota Head = 139.47 meter | |||||||
| 4.02Discharge of each Pump set = 4.80 LPS | |||||||
Tender Value
₹12.0 L
EMD Value
₹24,019
Closing Date
31 Jul 2026, 11:00 amClosed
Executive Engineer
Executive Engineer Jal Shakti Division Nalagarh District Solan HP
Extension for providing irrigation facility to village Okhoo Dabrota SC Basti from LIS Okhoo in Tehsil Ramshehar district Solan HP
2026_HPIPH_139915_1
6720-80 dated 24-07-2026
Open Tender
Civil Works
Item Rate
60 days
Ramshehar
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
₹24,019
21 Aug 2026
24 Jul 2026
31 Jul 2026
24 Jul 2026
31 Jul 2026
24 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Excavation in drains and channels etc. in earth work lift up to 1.5 meter stacking the excavated soil not more than 3 meters clear from the edge of excavation and then returning the stacked soil in 15 cm layer in trenches consolidatig each deposited layers by ramming and watering and then disposing of all surlus excavated earth as directed with in a llead of 20 meter in pick jumper work. | 290.4 | Cum | - | - |
| 2Providing, laying jointing,testing and commissioning at site in treches galvanised miled steel pipe following dia (medium grade) as under confirming to BIS-1239 (part 1) 1990 or latest with upto date amendments capable of with standing required test pressure as prescribed in BIS/ISO code, in random lengths of 5.50 to 5.60 meter. The pipe ends shall be bevelled suitable for butt welding, confirming to IS -816-1969 or latest as applicable (leak proof) in three layers at site of work with welding rods of standard make and all allied accessories what evere required for welding at site, tail pieces, tees, bends and other special manufactured from parent pipes etc. and cutting of pipes whatever required as per site requirment i/c carriage in all leads and lifts and as per directed by Engineer in Charge (earth work in trench to be measured and paid for separatly). | |||||
| 2.01 | 80 mm dia (M) | 660 | Rmt. | - | - |
| 3Providing and fixing MS flanges of following dia to GMS heavy/medium grade tubes conforming to IS: 6392-1971 of table-5, dia and welding with GMS pipe including cost of nuts, bolts washers complete as per IS 1963 specifications including packing sheet 3mm thick minimum and painting with anticorresive paints complete in all leads lifts and carriage of materials at site as directed by Engineer in Charge. | |||||
| 3.01 | 80 mm dia T-17 | 3 | Pair | - | - |
| 3.02 | 80 mm dia T-5 | 4 | Pair | - | - |
| 4 | Supply, erection, testing & commissioning of horizontal spindle, horizontal split casing, radial split Single,/Multi stages centrifugal pumps suitable for operation, in parallel of recommended make such as Mather and platt/KSB/Kirloskar/Jyoti/Beacon wear/BS &BE or other approved make conforming to BIS 1520-1980 with upto date amendments read with BIS 9137-1978 or latest edition to handle clear water having charteristics with impellers, casing ring, priming funnels & shaft sleeves of bronze, shaft of stainless steel with cast iron casing of suitable capacity coupled directly through a flexible coupling on a common base plate of cast steel /Mild steel to BHEL /Kirloskar/ NGEF/ Crompton / Siemen/Jyoti /GEC make energy efficient three phase squirrel cage electric induction motor having energy efficiency level IE -2 or higher suitable for operation on the data given below including the cost of all accessories in all leads and lifts and carriage of material of site and as per the direction of Engineer in Charge. | 1 | Set | - | - |
| 4.01 | Tota Head = 139.47 meter | - | - | - | - |
| 4.02 | Discharge of each Pump set = 4.80 LPS | - | - | - | - |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.36 MB
TandC.pdf
Tender Documents • 0.56 MB
BOQ_207390.xls
BOQ • 0.27 MB
Form6.pdf
Tender Documents • 0.32 MB
Form8.pdf
Tender Documents • 1.25 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .