REPAIR REPLACEMNT OF INTERNAL ELECTRIFICATION SERVICE SUBMAIN WIRING CEILING FAN GEYSER DB MCB EARTHING LED LIGHT FITTING AND ALLIED WORK INCL WELCOME MAINT E M SERVICES SOLAR LIGHT AND OTHER CONNECTED WORK AT SEWAR FORT AND PARADE GROUND UNDER GE

Amount

Disconnecting & taking down the ceiling fan of any sweep for preventive maintenance and re hanging the same after cleaning the dust etc with air pressure, cotton cloth & brush, taking out ball bearing and bush, cleaning with kerosine oil, lubricating greasing, oiling, cleaning to winding including supply and replacement of nuts, bolts, rubber seal, split pin, connector and copper cable PVC size 3 core 0.5 Sqmm upto required lenght from ceiling rose to connector of ceiling fan including hanging, connecting up and testing complete all as specified.

M&L for spray painting of ceiling fan of any sweep complete with blades, down rod etc with synthetic enamel paint of approved colour by spraying including filling cavities with filler, preparation of surfaces cleaning all dust etc and writing of MES No of size not exc 5cm thick using black enamelled paint complete all as specified.

M&L for cutting and dismantling the existing winding of ceiling fan of 1200/1400mm sweep and rewinding with super enamelled copper winding wire of suitable gauge including varnishing, lubricating, greasing, oiling and testing complete all as specified.

Supply and fixing for electronic circuit PCB for BLDC Ceiling fan of 1200 mm sweep etc complete all as specified.

Supply and replacement of following parts/components suitable for ceiling fan 1200/1400mm sweep :-

Capacitor 2.5/3.5 mfd, oil filled, 400V AC, 50 HZ, 85 degree C ISI marked complete all as specified.

Replacement of ball bearing of ceiling fan of 1200/1400mm sweep complete all as specified.

Hanging clamp complete with rubber real Make as existing /sample kept in AGE E/M office complete all as specified.

Fan Hook complete as standard real existing in market for fixed in GE complete all as specified.

Ceiling fan blade suitable for ceiling fan of any sweep (set of three blades) complete all as specified.

Down rod 50 cm long 15mm internal dia heavy duty duly painted including hanging clamp, rubber ring, nut and bolts complete with canopy complete all as specified.

GI pipe medium grade 40mm bore for fan hanging complete all as specified.

Disconnecting & taking down the exhaust/wall fan of any sweep for preventive maintenance and re hanging the same aftercleaning the dust etc with air pressure, cotton cloth & brush, taking out ball bearing and bush, cleaning with kerosine oil, lubricating greasing, oiling, cleaning to winding including supply and replacement of nuts, bolts, rubber seal, split pin, connector and copper cable PVC size 3 core 0.5 Sqmm upto required lenght from ceiling rose to connector of ceiling fan including hanging, connecting up and testing complete all as specified. (Note for Srl item No 01 and 1.1 here in before : (i) Minor parts such as nut, bolt, washer,rubber seal, split pin, connector copper cable pvc insulated 0.5 sqmm 3 core are deemed to included with unit rate of item.(ii) Parts/components replaced other than mentioned above will be measured and paid separately under respective items. (iii) The services of ceiling fan carrying out door to door.(iv) After completion of work all fans shall be tested to the entire satisfaction of Engr-in-charge.

M&L for spray painting of exhaust/wall fan of any sweep complete with blades, down rod etc with synthetic enamel paint of approved colour by spraying including filling cavaties with filler, preparation of surfaces cleaning all dust etc and writing of MES No of size not exc 5cm thick using black enamelled paint complete all as specified.

M&L for cutting and dismantling the existing winding of exhaust/wall fan of any sweep with super enamelled copper winding wire of suitable gauge including varnishing, lubricating, greasing oiling testing incl replacement of ball bearing/GM bush as required complete all as specified.

Supply and replacement of following parts/components suitable for exhaust fan 200-450mm sweep complete all as specified.(PVC & Steel ,body) :-

Capacitor 4 mfd, oil filled, 400V AC, 50 HZ, 85 degree C ISI marked Make : Asian/Unistar/Usha.

Fan blade set for exhaust fan of 200-300mm sweep complete all as specified.

Fan blade set for exhaust fan of 380-450mm sweep complete all as specified.

Exhaust fan mounting bracket incl nuts,fastners complete all as specified.

Exhaust fan motor of 200-300mm sweep as per existing PVC exhaust fan complete all as specified.

Exhaust fan motor of 380-450mm sweep as per existing steel body exhaust fan complete all as specified.

Louvers and shutters of PVC/ MS as per existing exhaust fan complete all as specified.

Taking down the existing unserviceable water storage type geyser of capacity 25/35/50 ltr by disconnecting from water connection and reinstallation at the same location after carrying out necessary repair/replacement of unserviceable parts such as Reset type thermal cut out, fusible plug fuse,Non return valve vertical type spring loaded, ISI marked,Iron neck ring, Brass inlet/outlet assembly complete without element and thermostat,Aperture plate made of brass,Element holding clip made of mild steel,Bolts with washer 25mm long for aperture plate,Rubber gasket, plate type for aperture plate, Indicator bulb square/round type complete with necessary connection wire of red & green colour complete, Pressure release valve of size 15mm, ISI marked, Anti vaccum valve with GI tee of 15mm bore, ISI marked, including one coat of spray painting with synthetic enamel paint and testing complete all as specified.

Supply and replacement following parts required for repair of the geyser water storage type 25/35/50 ltr capacity.

Thermostat switch adjustable type.

Water storage tank made out of special laminated texture finished body with covering of non corrosive protection on both sides of sheet with 100% pure Salem stainless steel sheet/electro statically powder coated body made of heavy gauge CRCA sheet complete all as specified.

Heating element 1500/2000W with rubber ring clamping screws etc complete all as specified.

M&L for removing unserviceable grouted "Anchor" type bolts and nuts from the wall and S&F new "Anchor" type bolts (04 Nos of 12mm dia) grouted properly in wall to hold 25/35/50 ltr capacity water storage type geyser with and including nuts and washers and marking good the disturbed surface in cement mortar 1:3 complete all as specified.

M&L for cutting chases, pinning in, making good to facings as original where required and pointing in cement mortar 1:3 for concealed water tubing etc and making good, cutting exc 10cm and not exc 20cm girth in brick or stone wall including making same texture of cutting surface as per existing wall complete all as specified.

S&F in repair PVC cable 3 core copper conductor of size 2.5 Sqmm to water storage type geyser of capacity 25/35/50 ltr including taking out old cable.

Taking down U/S plug top and S&F new 3 pin plug top 16 amps, 230 volts, ISI marked. Make : Anchor/Kinjal /cona/ Recold/ Leader.

Taking down U/S plug top and S&F new 3 pin plug top 5 amps, 230 volts, ISI marked. Make : Anchor/Kinjal /cona/ Recold/ Leader.

Taking down carefully copper/aluminium point wiring (light, fan, bell,same board, independent or power) complete fittings such as switches, ceiling roses, pendents, regulators, sockets etc and making good disturbed surfaces of wall, floor & ceiling etc complete all as specified.

Dismantling of old U/S sub main wiring and service wire of any size & make complete all as specified.

Dismantling of old U/S rusted main switch/DB of any size capacity and make complete all as specified.

M&L conceled point wiring complete with 1.5 Sqmm 02 x single core multistranded copper conductor of 1100 volts grade PVC pre insulated FRLS and unsheathed cable enclosed in PVC conduit pipe size not less than 20 mm dia with all PVC accessories such as Tee, bend, collar, elbow, square junction box etc fixed on the concealed surface and making good the disturbed surfaces of wall/ceiling by means of Wall putty and matching colour of existing wall, PVCsleevel/dash fastners with cadmium plated screws including suitable size of PVC boards/ sunken box for mounting fittings like switches, sockets, fan regulator etc including 1.5 Sqmm insulated but unsheathed copper earth continuity conductor to common earth and connected to earth dolly complete all as specified. for the following :-

One light point controlled by one way switch.

One fan point controlled by one way switch.

One 3 pin 6 Amp socket point outlet on the same board with other switches

One 3 pin 6 Amp socket point outlet on the independent board

One bell/buzzer point controlled by one push button.

One light point controlled by 2 way Switch

All as per item No 20 above but with multi stranded copper conductor cable 2.5 Sqmm size for 3 pin 16 Amps socket point outlet on independent board including 2.5 Sqmm copper cable PVC insulated FRLS unsheathed copper continuous earth wire including connecting to common earth dolly complete all as specified.

M&L point wiring complete with 1.5 Sqmm single core multistranded copper conductor of 1100 volts grade PVC pre insulated FRLS and unsheathed cable enclosed in and including PVC casing and caping double locked box type with all PVC accessories such as Tee, bend, collar, elbow, square junction box etc fixed on the surface of wall/ceiling by means of PVCsleevel/dash fastners with cadmium plated screws including suitable size of PVC boards for mounting fittings like switches, sockets, fan regulator etc including 1.5 Sqmm insulated but unsheathed copper earth continuity conductor to common earth and connedcted to earth dolly for the following :-

One light point controlled by one way switch.

One fan point controlled by one way switch.

One 3 pin 6 Amp socket point outlet on the same board with other switches

One 3 pin 6 Amp socket point outlet on the independent board

All as per item No 22 above but with multi stranded copper conductor cable 2.5 Sqmm size for 3 pin 16 Amps switch socket outlet on independent board including 2.5 Sqmm copper cable PVC insulated FRLS unsheathed copper continuous earth wire including connecting to common earth dolly.

S&F ceiling rose surface bakelite three terminal ISI marked including suitable size of PVC board.

S&F Socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type multi purpose flush type 230 volt

S&F switch piano flush button single pole one way 6 Amps 230 volt grade

S&Fswitch, 15 Amp flush type, complete all as specified and directed.

S&F socket 3 pin 15/16 Amps flush type complete all as specified.

S&F bell push flush type 5 Amps 230 volts grade.

M&L bell multi musical type 230 volts grade.

S&F step type electronic fan regulator EME type 450 watt.

S&F modular socket -6 Amps 2 /3 pin 2 module 230 volt.

S&F modular switch 1 way 6 Amps 1module 230 volt grade.

S&F modular switch 2 way 6 Amps 1module 230 volt grade.

S&F modular socket 2 /3 pin 16 Amps 2 module 230 volt.

S&F modular Switch 15/16 amp ,230V

S&F modular bell push flush type 5 Amps 230 volts.

S&F modular step type electronic fan regulator 2 module 80 watt.

S&F white cover plate with frame,2 module

S&F white cover plate with frame,3 module

S&F white cover plate with frame,4 module

S&F white cover plate with frame,6 module

S&F white cover plate with frame,8 module

M&L for submain wiring in and including PVC conduit having thickness 1.8 mm, 20/25 mm dia with two run of PVC insulated, sheathed multistranded copper conductor of 6 sqmm (FRLS) and one run of PVC insulated, sheathed multistranded copper conductor 6 sqmm (green in color) for earth continuity conductor and connected to common earth dolly with thimble etc, cutting chiseling for concealed piping and making good the disturbed surface to matching with existing complete all as specified. ( Note: Two run of 6 sqmm plus one run 6 sqmm of earth wire will be measured as 1RM) including dismantling of existing unserviceable submain wiring complete all as specified. Note: colour coding is to be maintained .(Ph-Red, N-Black, Earth- Green)

M&L for submain wiring in and including PVC conduit having thickness 1.8 mm, 20/25 mm dia with two run of PVC insulated, sheathed multistranded copper conductor of 4.0 sqmm (FRLS) and one run of PVC insulated, sheathed multistranded copper conductor 4.0 sqmm (green in color) for earth continuity conductor and connected to common earth dolly with thimble etc, cutting chiseling for concealed piping and making good the disturbed surface to matching with existing complete all as specified.(Note: Two run of 4.0 sqmm plus one run 4.0 sqmm of earth wire will be measured as 1RM) including dismantling of existing unserviceable submain wiring complete all as specified. Note: colour coding is to be maintained .(Ph-Red, N-Black, Earth- Green)

Supply and fixing in repair of concealed/surface distribution board double door type factory made and tested made of sheet metal enclosure powder coated suitable for mounting the MCB 240 volt, 415V of the following DBs :-

4 way MCCB VTPN DB with busbar 415 volts (double door)

12 way SPN DB with 200 amps rated busbar 240 volts (double door type).

8 way SPN DB with 200 amps rated busbar 240 volts (double door type).

4 Way SPN DB with 200Amp rated busbar 240V (Double door type)

S&F in repairs MCB's of following capacity :-

MCB TPN 63 Amps 415 volt, Category- C curve, 10kA rapturing capacity ( ISI marked)

MCB TPN 32 Amps 415 volt, Category- C curve, 10kA rapturing capacity ( ISI marked)

MCB SP 6-32 Amps, 240 volts,Category- C curve, 10kA rapturing capacity ( ISI marked )

MCB SPN 6-32 Amps, 240 volt,Category- C curve, 10kA rapturing capacity ( ISI marked )

MCB SPN 40 Amps, 240 volt,Category- C curve, 10kA rapturing capacity ( ISI marked )

Taking out old unsv T/L and Supply & fixing LED 20 watt LED tubelight fitting retro fit type with replacable rod complete with all accessories and including connecting up with three core twisted flexible copper conductor cable with suitable size of 230V, 50 Hz, complete all as specified.

Taking out old unsv T/L and Supply and fixing sensor based LED 20 watt LED tubelight fitting batten type with rod complete with all accessories and including connecting up with three core twisted flexible copper conductor cable with suitable size of 230V, 50 Hz, complete all as specified. make: Cromption Cat No:R20RBA or equivelent in Phillips/Surya/Helonix/Havells

M&L in repair of lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings all incl 9 watt LED lamp complete all as specified.

S&F in repair of modular enclosure of single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of SP 25 Amps, 240 volts.

S & F in repair of street light GI bracket of 0.6 mtr long made out of 40mm dia light grade GI pipe bend to shape of 120 degree end welded at required including 02 Nos MS clamp of F.I 40 x 6mm including nuts bolts & washers complete necessary fixing arrangements on pole complete all as specified.

S&F in repair of 35/36 watts LED street light fitings new generation energy saving, environmental friendly, long life, versatile pressure die cast aluminium IP66 with 10KV surge protection road way, luminaire with high power LED as light source alogwith suitable drivers etc and connecting with 2.5 sq mm solid aluminium conductor PVC insulated twin core weather proof cable from fittings to over head lines or to the jucntion box and fixing to complete all as specified.

Supply & fix in replacement 60 watts LED street light fitings new generation energy saving ,environmental friendly ,long life,versatile pressure die cast aluminium with following specification IP66 with 10KV surge protection , PF>0.95, THD < 10%, input voltage 220-240V AC, operating voltage (VAC) 100V -300 V, Lum Flux (+-) 10% , CRI -80 Lum efficienacy (+-) 10% CCT -5700K road way,luminaire with high power LED as light source alongwith suitable drivers etc and connecting with 2 x 1 sq mm multistranded PVC insulated copper conductor with PVC Conduit 20mm dia from fittings to the jucntion box and fixing to complete all as specified.

S&F in repair of LED light fitting 14 W,230V decorative wall mounting type with multicolour ABS housing with poly carbonate rings and glass shade with lamp holders connector block,etc complete with all accessaries pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified.

Supply and fixing in repair of LED light fitting mirror type with high out put diffuser 1 feet x 05 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified.

Supply and fixing in repair of LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified.

Supply and fixing in repair of LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified.

M & L for Earthing complete with Galvanised steel earth plate electrode 600 x 600 x 6 mm buried directly in the ground vertically to depth not less than 2.25 Mtr below the ground level with the top edge of earth plate, depth not less than 1.65 Mtr below the ground level connected to GI earth wire 4mm dia by means of bolts, nuts and washers protected by GI tubing light grade 15 mm dia uptoTest point, 20 mm dia watering pipe with funel & wire mesh, PCC pit in PCC 1:2:4 using 20 mm stone aggregates chamber 40 mm thick RCC cover slab (1:2:4) type B-1 using 20 mm graded stone aggregates complete all as specified and shown in electrical plate No.3 of SSR Part-I including earth work in any type of soil ,removal of surplus sil and providing charcol dust & salt layers all around the earth plate upto 15 cm all as required complete all as specified. ( Note:- Up to 7.5 Mtr length of pipe of 15 mm dia and GI wire shall be deemed to be included in unit rate quoted by tenderer GI pipe and GI strip beyond 7.5) will be measured separately under respective item.

Taking out Unsv U/G cable PVC insulated armoured PVC sheathed Al. Conductor, LT cable of any size complete all as specified.

Supply, laying, testing & commissioning LT XLPE insulated armoured (heavy duty) electric cable with stranded aluminium conductor 1100 volts grade (ISI marked) & laid in trenches/pipes or fixed on pole of the following sizes:-

(a) 35 Sqmm x 3.5 core

(b) 25 Sqmm x 4 core

(c) 16 Sqmm x 4 core

(d) 16 Sqmm x 2 core

(e) 10 Sqmm x 2 core

Supply and fixing in replacement of Lithium base Energy efficient integrated Solar street light of 30/32 watt in Aluminium Die casting body / FRP Bpdy , corrosion resistance,integrated PV panel Automatic dusk to input voltage 12.8V with suitable battery ,Driver efficiency .85%,PV module itself will be used to sense the ambient light to switch ON/OFF the Lamp, inbuilt MPPT charge controller, IP65,both PIR and fixed dimming available,4500 lumens (at full brightness) with grater than 150 lumen per watt,5700ANSI, cool white(5500K-6500K),CRI.70,moptical used, Metal core PCB,Low voltage cutoff ,high power LED,wide beam Angle(120 degree) LED Life 50000 hrs, weight less than 15 kg with GReen/Red indicator swith with suitable battery rating 12.8V-BIS standard of complete all as specified. Make: Orient/HAVELLS/Crompton Protections: Short circuit, overload,Reserve polarity and battery protection.Firm should provide vital parametres Test report from NABL accredited lab and should be of made in India with CE & ROHS complaint.

Excavation in trenches in soft/loose soil not exceeding 1.5m wide and not exceeding 1.5 metre in depth and getting out for laying of cable etc. complete all as specified.

Returning, filling in soft/loose soil including spreading, levelling, watering and well ramming, in layers not exc 25 cm complete all as specified.

Removing of surplus soil to a distance not exc. 50 metre and depositing where directed at a level not exc.1.5 metre above the starting point complete all as specified.

M&L for sand cushioning to under ground cable provided with layer of sand (8cm deep before laying the cable and 15 cm deep after laying the cable ie total 23 cm. Note : Punned thickness shall be measured

M&L for cable protection cover with sub Class`B` bricks old size laid dry, flat perpendicular across the cable in trenches complete all as specified.

Boring of holes under road, pavement, hard standing by trenchless technology using suitable tools and machinery for laying of pipe upto 150mm bore complete all as specified. Note :- GI pipe shall be measured and paid in concern Item

S & F or laying galvanised steel tubing light grade (ISI marked) for protection of under ground cable on poles/walls under road crossing of size 50mm bore complete all as specified.

Supply and fixing LED Round shape 12 watt ,140 V AC-270 V AC Recessed type with high effficiency PMMA diffuser soft glare free light complete with driver holder & LED lamp suitable driver efficiency not less than 88%, lumens efficiency > =100 lm/Watt, starting voltage 90V, THD<=20, power factor >0.9, color rendering index (CRI) >80, colour temperature 6500 K, UV/IR rediation no harm radiations having inbuilt surge protection device for overvoltage protection 2.5kV, Isolation 3.75 kV and Zero murcury contenet including connecting up with three core flexible copper conductor cases of suitable size complete all as specified. Make-: :Havells,CG,Bajaj..

Supply and fixing LED square shape 12 watt ,140 V AC-270 V AC Recessed type with high effficiency PMMA diffuser soft glare free light complete with driver holder & LED lamp suitable driver efficiency not less than 88%, lumens efficiency > =100 lm/Watt, starting voltage 90V, THD<=20, power factor >0.9, color rendering index (CRI) >80, colour temperature 6500 K, UV/IR rediation no harm radiations having inbuilt surge protection device for overvoltage protection 2.5kV, Isolation 3.75 kV and Zero murcury contenet including connecting up with three core flexible copper conductor cases of suitable size complete all as specified. Make-:Havells,CG,Bajaj.

Supply only BLDC ceiling fan remote including cell as per existing BLDC fanscomplete all as specified.

Checking/testing of Earth resistance value of earthing pits Installed inside KLP area as requirement basis as directed by Engr in Charge or as schedule and making the damaged earthing serviceable by pouring salted water into earthing or making continuity by GI strips and bringing down the resistance value within specified limits, including maintenance of existing earthing by cleaning the earth chamber funnel and cleaning of vagetation surrouding earthing pit up to 2 mtr complete all as specified. Note: (i) one earthing testing in one season is measured one job. (ii) Digital Earth tester will be arrange by the contractor his own. (iii) Date of testing and due date of testing is to be written on a register with sign of user rep & Engr-in Charge submitted to GE. (iv) If any material required for improvement of resistence value which value is more than their permissible limit will be measured and paid seperately.

M&L for chequerred cement concrete tiles 20CMX20CMx25CM thick set jointed and pointed in neat cement slurry over including 15MM thick screed bed in CM 1:6 and dismantling to existing tiles complete all as specified in duct etc.

MS Kumar and Brothers (BID ID -3347645)

GOVIND CONSTRUCTION (BID ID -3356801)

Sadhana Enterprises (BID ID -3341702)

PD GUPTA AND COMPANY (BID ID -3348198)