REPAIR TO SUNKEN FLOOR DADO SOIL WASTE VENT AND WATER SUPPLY PIPES SANITARY FITTINGS PLUMBING INCLUDING CLEANING OF OHTs IN C2A AND C2B UNDER GE (EAST) MATHURA

Amount

Wornout of existing treatment from sunken portion of WC/bath/Kitchen/Passage including taking down floor tiles, plaster, lime/cement concrete, WC trap complete emty of existing sunk complete all as specified and as directed.

M&L for Providing, cement concrete 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in coping, roof kerbs, padding etc as directed mixed with liquid water proofing compound as per manufacturer's instructions complete all as specified and as directed. Note :-WPC shall be measured and paid seprately.

M&L for cement concrete 1:7:12 type F2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

M&L for 10mm thick polymer modified plaster in cement mortar 1:4 mixing the polymer in the ratio of 1:10 ( 1 part of polymer & 10 parts of cement) for sides and base of sunken floor portion complete all as specified and as directd. Note : Make of Polymer Aasin Paints/Pidilite/STP/ Thermax /Sico

Taking down cement plaster on brick or stone walls,concrete surface etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.

M&L rendering 15mm thick on other than fair face of brick work/concrete surface in cement motar 1:4 by mixing liquid water proofing compound (using 200 ml water proofing liquid per bag of 50 kgs) or as per manufacturers instructions and surface finished even and fair complete all as specified and as directed. Note :- Liquid WPC shall be measured & paid seprately under relevant item of this BOQ.

Supply only liquid water proofing compound complete all as specified and as directed.

M&L for rendering 10 mm thick on fair faces brick wall or concrete surface in cement mortar 1:6 surface finished even & fair cement complete all as specified and as directed.

M&L for rendering 5 mm thick in cement morter 1:3 over 10 mm thick in cement mortar 1:4 dubbing coat as in ceiling surfaces of concrete surface finished even & smooth (without using extra cement) complete all as specified and directed.

M&L for providing damp proof layer in two coats of acrylic polymer coating consisting of 1 part of acrylic polymer liquid mixed with 2 parts of cementious powder applying at the rate of 1.40 Sqm/Kg of mix per coat. Second coat should be applied after 4-6 hrs of first coat, 5 days curing is to be carried out to the surface before providing plastering complete all as specified and as directed. Note : Make of the material 'Smart Care damp block 2K' of Asian paints or equivalent from Dr Fixit, STP, CICA etc. as approved by GE

M&L for preparation of new plastered surface of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and as directed.

M&L preperation of newly plastered surfaces of walls and applying two coats of weather proof acrylic exterior paint dark shade over and including a coat of primer (100% Acrylic) including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed.

M&L for preparation of new plastered surface of ceilling and applying three coats of white wash complete all as specified and as directed.

M&L preperation of newly plastered surfaces of walls and applying two coats of distemper oil emulsion paint over and including a coat of alkali resistant primer complete all as specified and as directed.

M&L for providing wall care putty 1mm thick on plastered surfaces of wall complete as specified and as directed.

M&L for preparation of old decorative surfaces of walls and applying one coat of cement base paint complete all as specified and as directed.

M&L for preparation of old decorative surfaces of walls and applying one coat of weather proof acrylic exterior paint including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed.

M&L for preparation of old decorative surfaces of walls and applying one coat of distemper oil emulsion paint complete all as specified and as directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for 25 mm cement concret 1:2:4 type- B0 (using 12.5 mm graded stone aggregate) as levelling course as in floor etc finishing cement concrete surface even and fair without using extra cement compete all as specified and as directed.

M&L for Non Skid ceramic joint free coloured tiles 7 to 8 mm thick, (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in cement motar 1 : 6 complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles in vertical surface of size 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick rendering in cement motar 1:4 complete all as specified and as directed.

M&L for Vitrified Ceramic light shade tiles 10 mm thick (square/rectagular) polished,area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in cement motar 1:4 complete all as specified and as directed.

All as per item Serial No 23.00 here-in-before but as in skirting/dado over and including 10 mm thick rendering in cement motar 1:4 complete all as specified and as directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and as directed.

M&L for 20mm thick Granite (of any type) work any colour as specified (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like and including in cement mortar (1:4) pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and as directed.

M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations etc complete as specified and as directed.

Demolition of roof treatment including PCC/brick tiles, mud phaska, PCC padding, plastering and APP membrane complete treatement of any thickness and any position and removing the demolished material out of MoD land complete all as specified and as directed.

Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 40 mm (Average) thickness cement concrete type- B0 1:2:4 (using 12.5 mm graded stone aggregate) as in floors/padding finishing cement concrete surface even and fair compete all as specified and as directed.

M&L for 75 mm thick cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base, sub floor, floor and paving finished the surface even and fair without using extra cement complete all as specified and as directed.

M&L for rubber moulded glossy pattern chequred cement tiles 30cm x 30cm x 25mm thick, with grey cement and pigments, set jointed and pointed in neat cement slurry in floor laid over and including 20 mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

M&L non skid cermic ENDURA coloured tiles 10mm thick (square/rectangular) area of each exc 0.06 Sqm but n. exc. 0.11 Sqm as in floors set and jointed in neat cement slurry & pointed with coloured cement to match the colour of tiles laid over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

M&L for cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed.

M&L APP based polymeric membrane not less than 3 mm thick, weighing not less then 3.5 kg / Sqm, reinforeced with polyster non-woven fabric (weighing not less than 150 gm/sqm) and upper side of membrane thermally insulated with white mineral gravel finish, uniformly embeded during manufacturing process, shall be used. It shall be laid by torch application. Side overlaps shall be 75 mm and the ends shall be 100 mm and all overlaps and jointed shall also be sealed by torch application. For parapets, membrane shall be taken to a height of minimum 30cm and then inserted inside the parapet in a grooves.The same shall be finished by a membrane flashing over a coat of cold applied bituminous primer confiming to IS:3384. @ 0.40kg per Sqm complete all as specified and directed.

M&L for 50 mm thick cement concrete 1:3:6 type C1 (using 20 mm graded stone aggregate) as in plinth protection, finishing cement concrete surface even and fair without using extra cement including filling the joints by bitumen and sand mixed in the ratio 1:4 by weight complete all as specified and as directed.

M&L for cement concrete tiles 25cm x 25cm x 22mm thick machine pressed set, jointed and pointed in neat cement slurry in floors laid over and including 20mm screed bedding in cement mortar 1:6 complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing and connections including disconnection of fittings complete all as specified and as directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm width or girth of brick walls complete all as specified and as directed.

Supplying & fixing steel tubing ,galvanised, medium grade 15 mm bore with all fittings and fixed complete to walls and ceiling or laid under floor complete all as specified and as directed.

Taking up or down 20mm dia steel tubing and connections including disconnection of fitting complete all as specified and as directed.

Supplying & fixing steel tubing ,galvanised, medium grade 20 mm bore with all fittings and fixed complete to walls and ceiling or laid under floor complete all as specified and as directed.

S&F in repair rotational moulded polyethylene water storage tank (Triple layers white in colour) (Cylindrical vertical with closed top) 500 liters capacity hoisted and fixed in position complete all as specified and as directed.

S&F in repair rotational moulded polyethylene water storage tank (Triple layers white in colour) (Cylindrical vertical with closed top) 750 liters capacity hoisted and fixed in position complete all as specified and as directed.

S&F in repair rotational moulded polyethylene water storage tank (Triple layers white in colour) (Cylindrical vertical with closed top) 1000 liters capacity hoisted and fixed in position complete all as specified and as directed.

S&F ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for 20mm bore dia of pipe and fixed (minimum weight 210 gms each) complete as specified and as directed.

M&L for Cleaning of HDPE tank of capacity exc 500 liter but n exe 1000 litres by Flushing out water cleaning & removing of sludge, scale mud etc from wall & floor by rubbing with brushes, cleaning with caustic soda etc complete & finally washing with fresh water, including writing date of cleaning with white synthetic enamel paint and removing sludge, scale mud etc to a distance not exceeding 50 metre and depositing where directed complete all as specified and as directed.

S&F in repairs cover for HDPE water tank of capacity 500/750/1000 ltrs rotating type with frame including nut bolt complete all as specified and as directed.

S&F in repairs ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for 20mm bore dia of pipe and fixed (minimum weight 210 gms each) complete as specified and as directed.

S&F in repair Gun matel, globe or gate valves with iron wheel head, screwed both ends for iron pipe 20 mm bore dia and fixed complete all as specified and as directed.

S&F in repair Bip tap cast copper alloy chromium plated long body screwed down high pressure with crutch or butterfly handle screwed for iron pipe of 15mm bore dia complete all as specified and as directed.

S&F in repair pillar tap cast copper alloy chromium plated, fancy type with capstan heads,screwed down high pressure,with or without letters Hot or Cold with long screwed shank and fly -nuts, screwed for iron pipe 15 mm bore dia complete all as specified and as directed.

S&F in repair 2 way bib cock cast copper alloy chromium plated of superior quality with wall flange 15 mm dia including fixing to pipe complete all as specified and as directed.

S&F in repairs stop valve cast copper alloy, chromium plated fency type with long shank and cup (Concealed type) screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe 15 mm bore dia complete all as specified and as directed.

S&F in repair Chromium plated cast copper alloy Angle stop valve/cock with wall flange screwed one ends to iron pipe or for unions and other end to PVC connection all as specified

S&F in repair cast copper alloy chromium plated Two way Angle cock for 15 mm dia bore iron pipe with wall flange complete all as specified and as directed.

S&F in repair cast copper alloy chromium plated wall mixer including provision for head and hand shower mixing hot & cold water screwed down for iron pipe 15mm bore dia complete all as specified and as directed.

S&F in repair wash hand basin mixer with Telephone shower head and hand arrangement combination pattern connecting legs and wall flanges but with crutch & telephone shower complete all as specified and as directed.

S&F in repair cast copper alloy chromium plated wall mixer for mixing hot & cold water screwed down for iron pipe 15mm bore dia complete all as specified and as directed.

S&F in repair stainless steel Towel Rack 600 mm long with lower Hangers complete all as specified and as directed.

S&F in repair stainless steel tubular Towel Rail 20mm dia D type 600 mm long between flanges including brackets fixed to wall complete all as specified and directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450 mm complete all as specified and as directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and as directed.

S&F in repair cast copper alloy chromium plated single lever Extended basin mixture height 85mm without popup waste system with 450mm long braided hoses complete all as specified and as directed.

S&F in repair sink EXTENDED swinging spout 450mm long (wall mounted model) with connecting legs and wall flanges for 15mm bore iron pipe complete all as specified and as directed.

S&F in repair Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including 10 ltr capacity PVC valveless syphonic action type low level flushing cistern white, with inlet, ball valve, float, handle and 32mm dia PVC flush pipe complete all as specified and as directed.

S&F in repairs Vitreous China wash down water closet (pedestal pattern) including Plastic water closet seat cover white, closed pattern with flat bottom and cover with mild steel hinge chromium plated including connection to drain (or outgoing pipe) and flushing pipe, antisyphonage pipe etc complete and all as specified and directed.

S&F in repairs EWC 705x370x770mm S trap 300 mm combination pattern including cistern and other connected accessories and fixing to floor complete and all as specified and directed.

S&F in repairs vitreous china wash hand basin, white, flat back, size 550x400mm including brackets, waste fittings, brass, chromium plated 32mm with long screwed shanks and fly nuts, flanged end bedded in red lead cement and other end fixed, including PVC waste pipe of 32mm bore 75cm long, complete all as specified and as directed.

S&F in repair plastic water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete as specified and as directed.

S&F in repairs 10 ltrs PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle, aluminium brackets for bottom support fixing with gitties embeded in wall with drilling machine etc complete all as specified and directed.

S&F in repairs Hand shower (Health faucet) (ABS brass chromium plated body) with 15mm dia 1.25mtr long SS flexible tube & wall hook including making connection and fixed in position complete all as specified and as directed.

S&F in repairs stainless steel Jet sppray with 1.20 mtr hose fixed with EWC complete all as specified and as directed.

S&F in repair stainless steel Toilet paper holder of brass, chromium plated fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed.

S&F in repairs 5.5mm thick sheet glass shelf assembly consisting 12cm wide with chromium plated bracket guard & railing 60cm long complete all as specified and as directed.

S&F in repair corner glass shelf of 225 x 225mm size with stainless steel bracket fixed to wall complete all as specified and as directed.

Dismantling wall and ceiling boards (fiber, pulp, insulation, etc) or insulation board/slabs/ blankets, any thickness, including cover fillets. Complete all as specified and as directed.

S&F 18mm thick factory made Rajshri PVC celuka ply plain white color both side fixed with screws solvent cement/adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets with density 575 to 600 kg/cum complete all as specified and as direction.

S&F 18mm thick PVC Celuka ply one side prelaminated with decorative lamination, and other side balancing white colour fixed with screws, solvent cement/adhesive to make kitchen cabinet/drawer shutters etc (density of sheet 575 to 600 kg/cum complete all as specified and as directed.

S&F 12mm thick PVC Celuka ply both side plain white colour fixed with screws, solvent cement/adhesive to make wall mount kitchen cabinet back and pull out drawer (Density of sheet-575 to 625 kg/Cum sides complete as per specified and as directed.

S&F stainless steel 304 grade kitchen modular baskets for storage of plates, cups, grain basket, glass cutlery, bottles etc as per required size complete all as directed.

S&F auto closing hinges 35 mm of 0 crank( KH-001)OR 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete all as specified and as directed. Make- KAFF/Godrej/Hettich

S&F ball bearing runners 450 mm Telescopic (KTS-20) full extension load capacity 50 kgs complete all as specified and as directed.

S&F 100mm long stanless steel handles for kitchen cabinet/shutters complete all as specified and as directed.

S&F Continuous (piano) hinges width of flaps 40 mm (when opened) mild steel, bright finish or electrogalvanised complete all as specified and directed.

S&F 150 mm aluminium anodised Hasp and staple, safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed,

S&F in repair 25mm dia stainless steel tubular curtain rod including fixing knobs, brackets, stops, roller and caps etc complete all as specified and as directed.

Taking down chowkhats or frames with shutter (without taking off shutter from the frames) area not exc 1.5 Sqm each complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick one side prelam colour PVC sheet reinforced with M.S. Square tube & edges will be painted to match with prelam sheet, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.

S&F factory made Solid PVC Moulded Door Shutter 28 to 30mm thick (stiles) with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified and as directed.

S&F Extruded aluminium handles of size 150 mm, fabricated type anodised complete all as specified and as directed.

S&F aluminium anodised barrel tower bolts 150 mm long of extruded section and fixed complete all as specified and as directed.

S&F But hinges 100 mm size of stainless steel, medium weight, cold rolled complete all as specified and as directed.

S&F in repair PVC cabinet with mirror of size 350mm x 450mm fixed to wall with screw complete all as specified and as directed. Make : Prayag/commonder/Neelkamal/Polytuff

S&F in repair over head shower of size 100mm dia round single flow with 450mm long Arm (body and face plate stainless steel with chrome finish) with rubit cleaning system complete all as specified and as directed.

S&F in repairs stainless steel peg set of 8 hooks fixed to wall or wooden door with stainless steel screws complete all as specified and as directed.

S&F in repair plate rack made of stainless steel sheet 1mm thick for kitchen overall size 900mm x 750mm x 600 mm complete all as specified and as directed.

S&F in repair 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with suitable MS clamps of size 25x3mm at two mtr spacing complete all as specified and as directed.

S&F in repair 32 mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/ cm2 fixed as waste pipe for WHB/Urinal etc complete all as specified and as directed.

S&F in repair 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with suitable MS clamps of size 25x3mm at two mtr spacing complete all as specified and as directed.

S&F in repair 110mm bore PVC (SWR) bends any radius complete as specified and as directed.

S&F 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal provided with acess door complete as specified and as directed.

S&F 110 mm bore PVC (SWR), vent cowl complete as specified and as directed.

S&F in repair 75mm bore PVC (SWR) bends any radius complete all as specified and as directed.

S&F in repair 75mm dia of outlet PVC (SWR) floor trap plain with grating including jointing with solvent cement complete as specified and as directed.

S&F in repair brass chromium plated waste coupling for 32 mm bore dia discharge pipe for glazed ware sink, basins, etc complete all as specified and directed.

S&F in repairs 800 mm long PVC flexible waste pipe 32 mm bore dia for fixing in urinals and wash basin complete all as specified and directed.

S&F in repairs sinks made of stainless steel sheet 1mm thick for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete as specified and as directed.

S&F in repairs stainless steel double bowl sink over all size 1125mm x 500mm x 175mm, made out of 1mm thick sheet 304 grade for kitchen including waase pipe CI cantilever brackets and 40mm size brass CP waste coupling etc and making good to the side of wall connecting union to pepe including bedding in cement mortar to dwarf wall complete all as specified and as directed.

S&F in repair stainless steel Grating doom 100 mm dia complete all as specified and directed.

S&F in repair bottle trap for 32mm bore discharge pipe (half or full threated) of PTMT having min water seal of 25mm (min. weight 32mm-260gms) complete all as specified and as directed.

S&F in repair 20 mm bore GI Nipple suitable for HDPE water tank (minimum weight 15mm-38gms) complete all as specified and directed.

M/S United Builders

M/s DEVI DAYAL CONSTRUCTION CO

M/S CHAUDHARY CONSTRUCTION

M/s Hoti Lal Contractor

M/s Orient Traders

Ahmed constructions

M/S A.K. ENGINEERS