Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.4 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹32.0 L+₹2.6 L (8.81%)Rejected-Finance | L2 | Rejected-Finance L2 | |
| 3 | L3₹32.5 L+₹3.1 L (10.6%)Rejected-Finance | L3 | Rejected-Finance L3 | |
| 4 | L4₹32.9 L+₹3.5 L (11.9%)Rejected-Finance | L4 | Rejected-Finance L4 | |
| 5 | L5₹34.2 L+₹4.8 L (16.4%)Rejected-Finance | L5 | Rejected-Finance L5 |
Tender Value
Refer Docs
EMD Value
₹67,780
Closing Date
23 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (SOUTH) PATHANKOT
GE (SOUTH) PATHANKOT
PROVN OF 2 X GUARD ROOM FOR EXISTING GD POST NO 3A AND GD POST NO 6 AT OTG AREA UNDER GE (S) PATHANKOT
2024_MES_642408_3
GES/PKT/T-57/2023-24
Open Tender
Construction Works
Item Rate
180 days
GE SOUTH PATHANKOT
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE SOUTH PATHANKOT
₹67,780
Yes
8 Jun 2024
30 Mar 2024
25 Apr 2024
30 Mar 2024
23 Apr 2024
8 Apr 2024
Amount
Surface dressing n exc 15cm deep and getting out in any type of soil, complete all as specified and directed.
Surface exacavation n exc 30 cm deep and averaging 15cm deep and getting out in any type of soil, complete all as specified and directed.
Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation etc in any type of soil and getting out, complete all as specified.
Excavation over area n exc 1.5m deep and getting out in any type of materia (soil), complete all as specified.
Returning filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm thick all as specified.
Removal of excavated material soil n. exc 50m and depositing where directed at a level n. exc. 1.5 above the starting point all as specified.
M&L PCC 1:4:8 type D-2 using 40mm graded agg. as in foundation filling and mass concrete complete all as specified.
M&L for reinforced cement concrete M 25 (Design mix) using 20 mm graded in foundation, including rafts, footing, foundation beams, plinth beams, bases for columns etc, basement slabs, under reamed piles and mass concrete.
M&L for reinforced cement concrete M25 (Design mix) using 20 mm graded in Columns, pillar, piers, posts and struts.
M&L for reinforced cement concrete M25 (Design mix) using 20 mm aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.
M&L for reinforced cement concrete M25 (Design mix) using 20 mm aggregate in beams, cantilevers, shelves, bressummers, lintels over 1.5m span, complete all as specified and directed.
M&L for reinforced cement concrete M25 (Design mix) using 20 mm aggregate for wall and like, complete all as specified and directed.
M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter - Rough finished surfaces of concrete - Flat
M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions - Rough finished surfaces of concrete - Square, rectangular or polygonal, complete all as specified and directed.
M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) - Rough finished surfaces of concrete - Flat, complete all as specified and directed.
M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc - Rough finished surfaces of concrete - Flat, complete all as specified and directed.
M&L for Formwork to face of walls, retaining walls, abutments, parapet and staircase railings and similar work incl attached pilasters,butteress, etc,vertical or to batter, complete all as specified and directed.
M&L for precast cement concrete C1, 1:3:6 (using 20mm graded stone aggregate) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas,water troughs, mangers, shelves and similar articles with plain faces, complete all as specified and directed.
M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape, required including cranking, bending, spirally for hopping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.
M&L for Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.
M&L for Brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6, complete all as specified & directed.
M&L for Brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:6, complete all as specified & directed.
M&L for cutting chases, pinning in brick work for concealed water tubing and making good to facings where required and pointed in cement mortar 1:3 cutting not exceeding 10cm girth all as specified.
S&F 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed, complete to walls all as specified.
S&F 20mm Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors, complete to walls all as specified.
M&L for steel water tubings 25 bore, medium grade galavanised with all fittings such as socket, bends, elbows, nipple, caps, plugs, short pieces etc (ISI Marked),fixing to wall or laid in trenches complete all as specified and as directed.
M&L for GI pipe light grade 40 mm dia for cable protection on road crossings/ plinth protection with fixed to the pole wall etc. suitable fittings for cable protection.
M&L for 15mm thick plaster in cement mortar 1:4 on fair faces of brick work or concrete surfaces finishing the surfaces even and smooth without using extra cement all as specified.
M&L for rendering 10mm thick on concrete in CM 1:3 in facia or edging of chajjas,ceiling and roof projection making the line in true shape finished even & smooth without using extra cement all as specified.
M&L for Rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finishing the surfaces even and smooth without using extra cement all as specified.
M&L for preparing the new plaster surface and applying three coats of white wash on ceiling all as specified.
M&L for two coats of cement base paint over a coat of primer over prepared surface of wall complete all as specified & directed.
M&L for two coats of oil bound distemper over a coat of primer over prepared surface of wall by applying 1 mm thick wall care putty complete all as specified.
M&L for broken stone or boulder hardcore of guage n exc 63mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface, complete all as specified and directed.
M&L for 75 mm thick PCC 1:4:8 as in sub base of floors etc and finishing the surface even and smooth without using extra cement, complete all as specified and directed.
M&L for 75 mm thick cement concrete (1:3:6) type C-1, using 20mm graded crushed stone aggregates as in plinth protection in panels, including finishing the surfaces even and fair, complete all as specified & directed.
M&L for providing glazed ceramic coloured tiles in vertical surface 450x300mmx7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over 10mm thick rendering in CM 1:4, complete all as specified and directed.
M&L for Machine cut kota stone slab flooring/ skirting 18 mm thick over and including 15mm thick screed bed in cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed.
M&L for Non skid ceramic colour tiles 7 to 8 mm thick ( sq/ rect) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in cement mortar 1:4, complete all as specified and directed.
M&L Machine pressed precast concrete inter locking paver block any shape with grey cement and pigment size conforming to IS 15658-2006 of 60mm thickness,M-35 Grade laid over sand cushioning. Note :- sand shall be measured and paid separetly.
Supply only sand filling under floors, complete all as specified and directed.
S&F pressed steel frame for doors made out of MS sheet 1.25mm thick of size 125x60mm for with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-1 back of chowkhats all as specified.
S&F 35mm thick HDF prelaminated (Wenga/ Teak coloured ) moulded shutter PUF(Poly urathane foam ) insuation with minimum density 40Kg/Cum filled in between two HDF sheets of thickness 3.2mm both & border covered with 10mm thick PVC sheet as per Drg No. CEPZ/TD-378/sheet 1/1 dated 27/12/2011 complete all as specified and directed.
S&F 35mm thick single piece factory made wire gauge door shutter of (steel & aluminium XPM) manufacturing by PVC sheets printed 5mm thick on both side on frame made out of MS tube 19 SWG size 19 x 19mm complete in all respect with lock rail & beautified by PVC beading all around fixed with PVC solvent cement complete as per Drg No.CEPZ/TD-378/Sheet 1/1 dated 27/12/2011 complete all as specified and directed.
S&F Solid PVC door frame(Single frame) of size 60mmx30mm made out of solid PVC foam with hmgenous fine cellular stucture having smooth outer integral skin with suitable metal stiffner and fxed with 100x8 sheet etal CSK screw cmplete all as specified and shown on drawing.Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screw holdig strength to fix hinges abnd hold doors properly for a long life).
S&F for Factory Made Solid PVC Moulded Door Shutter wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing
S&F steel window/ventilator with tubular frame factory made of size 79mm x 39mm, 16 gauge rectangular tubular frame with side hung shutter both for glazed and wire gauge with glazing bars 12x3mm flat iron incl projecting type hinges with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 100mm long and 10mm square bar grills complete, including two coats of synthetic enamel paint over one coat of red oxide primer all as specified & as shown on drg No CEPZ/TD-245/01 and 246/02 sheet ½ & 2/2 (excluding glass & wire guage).
S&F sheet glass 3.00mm thick ordinary quality and glazing with oil putty in square n.exc 0.50Sqm in each panes complete all as specified and directed.
S&F glavanized mild steel wire cloths 0.56mm nominal dia and average width of aperture 1.18mm & fixed with tint tacks or glavinized wire staples complete all as specified and directed.
S&F 300mm ordinary mild steel springs ISI marked including roller and roller plate complete including all necessary welding if required.
S&F MS sliding door bolt 300mm long with hasp, staple (bolt type) and fixed complete all as specified and directed.
S&F Vitreous china urinals,half stall (back or corner wall type) with urinal spreader,complete including waste CP coupling and waste pipe providing and fixing plugs,bedding urinal against wall in cement mortar 1:2,securing urinal to plugs with and pointing around urinal back in cement.
S&F 150mm long aluminium, anodized barrel tower bolts of extruded section ISI marked
S&F 150mm extruded aluminium alloy handle fabricated anodized ISI marked .
S&F 100mm long butt hinges medium weight cold rolled ISI marked mild steel .
M&L for 10mm thick rendering in Cement mortar 1:4 mixed with WPC 3% by weight of cement on fair faces of concrete roof surfaces , finished even and fair to receive treatment on roof complete all as specified and directed. (Note:- WPC shall be measured and paid separately under relevent item.)
Providing and laying of water proofing treatment of roof APP (Atactic Polyproplyllen) modified prefabricated five layer 3mm thick water proofing membrane, super thermply non woven polyester mat reinforcement of 160 grm, weight of membrane @ 3.6 Kg/Sqm over a solvent based bitumen primer @ 0.3 Ltr/ Sqm by the same manufacturer conforming to IS:3384-1986 , The membrane shall be laid using bitumen torch.The end lap should be 100 mm and the side lap must be minimum 75 mm the membrane shall be first laid up to the parapet wall junction and then shall be overlapped with another membrane (flashing) with an overlap covering up to a distance of 300mm. In case parapet height is less than/ up to 500 mm, membrane shall be terminated at the top of parapet.All rain water pipe opening shall be suitably sealed with the APP membrane all as specified and directed. (The rate includes for filling cracks in existing roof with cement putty using suitable bonding agent (shalcrate 42) before laying cement plaster)
Supply only liquid water proofing compound of approved brand.
S&F angle valve 15mm bore size fancy type cast copper alloy chromium plated, complete all as spd & directed .
S&F stop valve 15mm bore size concealed fancy type complete all as spd & directed .
S&F 20mm bore stop valve cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron of pipe or for unoins all as specified.
S & F long nose bib taps 15mm bore size fancy type cast copper alloy chromium plated, complete all as spd & directed .
S&F for CP Soap Dish fixed with and incl CP screws of as approved by Engr-in-Charge.
S&F Tubular towel rail 20mm dia ‘D’ type 60cm long between flanges brass chromium plated.all as specified and approved.
S&F rotational moulded polythene water storage tank double layered (outer layer black and inner layer white colour) (Cylindrical vertical with closed top hoisted fixed in position all as specified capacity of tank 1000 ltrs including inlet and outlet connections 20 mm air and 15 mm dia GI pipe medium grade including 20 mm gate valve.
S&F 20mm PTMT ball valve high pressure with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified
S&F vitreous china wash down water closet (pedestal pattern) including fixing bolts and connecting to drain pipe including seat cover plastic flat bottom and connection to flush pipe, anti syphonic pipe etc complete all as specified and directed.
S&F flush pipe of polythene of low or high density tube 32mm dia for low level cistern.
S&F PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets of 10 Ltr capacity.
S&F 550x400mm wash hand basin of light shade including CP coupling CP bottle trap complete all as specified and directed.
S&F brass chromium plated overhead shower rose 125mm size with 225mm arm with swivel joints fixed including fixing to steel pipe or union all as specified.
S&F PVC connection 15mm bore size with two nuts and washers of length 450mm all as specified and approved.
S&F 110 mm PVC (SWR) junction single, (Single T) equal or unequal
S&F 110mm bore pipes,PVC (SWR) bends any radius fitting fo PVC (SWR) pipes, complete all as specified and directed.
S&F 110mm bore, PVC rainwater (SWR) drainage pipes single socketed, in any length with rubber ring joints, fixed to walls with sufficent number of Iron stack clamp complete all as specified and directed.
S&F 75mm bore PVC floor trap with grating including jointing to waste pipe in cement concrete type B-1, 1:2:4, complete all as specified and directed.
S&F for 75mm bore pipes,PVC (SWR) bends any radius fitting fo PVC (SWR) pipes, complete all as specified and directed.
S&F for 75 mm PVC (SWR) junction single, (Single T) equal or unequal
S&F of 75mm PVC (SWR) drain pipes 75 mm bore single socketed in any length with rubber ring joint fixed to walls/floor complete all as specified and as directed.
S&F factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other frame/Chowkhat of size 45x70mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum , screw withdrawal strength of 2200N (Face) & 1100N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with properly of being termite/borer proof, water/moisture proof and fire retardant 152 Section 8 and fixed in position with MS hold fast/lugs/SS dash fasteners ofvrequired dia and length complete as per direction of Engineer-in-charge.
S&F prelaminated 18mm thick lead free factory made 100% solid WPC (wood polymer composite) sheet having high natural fiber content 25 to 30% wood colour sheets with density not less than 500 Kg/Cum and the weight of sheet of 1 sqm should be 11 Kg (+-5%) manufactured by ISO 9001-2015 certified company the sheet should be 100% water proof termite proof, fire retardent, manufactured by single layer extrusion process with excellent screw holding capacity and shore D hardness complete including all fittings like handle, hinges, hydraulic stopper, beading etc as per direction of Engineer-in-charge.
S&F 25mm dia stainless steel curtain rod fixed with stainless steel brackets & ornaments end cap fixed with screws,gutties etc design/ shape approved by Engr-in-charge, complete all as specified and directed.
M&L for treating the backfill in contact with foundation at the rate of 7.5 Liter of emulsion per square metre of vertical surface (area of the sub structure in contact with backfill to be measured)
M&L for treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter of the wall, complete all as specified and directed.
M&L for preparation of newly plastered surfaces of wall, roof projection/ window chajjas and similar surfaces and applying two coat weather proof exterior emulsion paint, complete all as specified and directed. Note : - Tint/ Shade shall be approved by Engr-in-Charge.
M&L for gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed cast copper alloy, chromium plated, fancy type ISI marked with crutch or butter fly handles screwed down screwed for iron pipe of 25 mm dia outer dia sizes complete all as specified.
M&L for cutting cast iron pipes up to 80/50 mm dia and reducing to required length in position for insertion of new tees, branches, etc, complete all as specified and directed.
M&L for 150 mm thick cement concrete (1:3:6) type C-2 using 40mm grade stone agg as in bed for pipes incl packing under and huaunching against the sides of pipes after they are laid tested complete all as specified and directed.
M&L for RCC 150mm dia NP-2 pipes with collar, complete all as specified and directed.
Soakage wells of size 1.2mx 3.00m effective depth with excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary 1:4 CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size
Construction of brick masonry valve pit of size 60cmx60cmx60cm (internal dimension of chamber) with brick work in cement mortar 1:4 including plastering internally and pointing externally as the work proceeds complete with MS sheet cover 3.15mm thick and angle iron frame 40mmX40mmX6mm with handle , locking arangement and painting with two coats of synthetic enamelled paint over a coat of red oxide primer on steel surfaces including earth work & excavation in any type of soil, disposal of surplus spoil not exceeding 50m concrete etc all as specified and shown on drawing.
M&L for good quality dry sand cushioning to under ground electric cable on layer of 8 cm thick before laying the cable and second layer of 15 cm thick after laying the cable all as specified in clause 19.75 of MES Schedule part-I (2009) Note : Sand shall be fined sand as specifed and punned thickness shall be measured and paid.
Supply and laying sub class 'B' bricks of old size (230x 115x75 mm) or of size locally available, laid along alignment of cable as protection to cable in trenches complete all as specified and directed.
Supply and lay cable XLPE insulated armoured heavy duty electric cable with aluminium counductor, 1100 volts grade of crosssectional area 10 Sq mm 02 core. Note: Earth work ( Excavation, Returning & refilling and removal), sand cushining , cable protection cover, GI protection pipe shall be measured and paid for seperately under respective item of Schedule.
Note: In case the tenderer quotes different rates for similar item then lowest rate shall only be applicable for payment and contractor shall not have any claim on this account.
V K Sharma and Sons
M/S Ajay Kumar Mahajan
M/S BISHAN DASS AND SONS
M/S S KUMAR & CO
VIJAY CONSTRUCTION CO
VIJAY KUMAR LAKHNI
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .