Civil works at Irungattukkottai SS

Amount

Labour charges for Clearing of juliflora jungle with uprooting for facilitating survey including cost of all labour, transport, T&P, lead lift etc., complete as directed by the department engineer at site.

Labour charges for dismantling of existing brick work for cable inside the control room building including cost of all materials, lead, lift, labour charges, etc., complete as per standard specification and as directed by the department engineer at site.

Earth work excavation and depositing on bank with initial lead of 10 m and lift of 2m in hard shift clay, shales, Murram including cost of all materials, lead, lift etc., complete.As department enigineer at site

Providing M-sand filling in foundation, including cost of sand, filling charges, watering and consolidation etc complete. As department enigineer at site

Labour charges for Re filling of foundation with excavated earth other then sand in layers of 15cm thick, including charges for spreading watering, consolidation as per standard specification and as directed by the engineer at site including all labour, transport charges, lead and lift etc., complete.

Providing Antitermite treatment in four stage (1) Immediately after ewe and before laying of fundation concrete (2)After refilling sides of foundation (3) Before laying of foundation concrete annd out side of basement upto 1m alround the building using etc complete. As department enigineer at site

Providing and laying foundation concrete in PCC 1:3:6, using 20 mm HBG stone including cost of cement, and all materials labour, lead, lift etc complete.As department enigineer at site

Providing RCC 1:1.5:3 using 12 to 20 mm HBG metal for concrete including cost of all materials, curing, labour ,lead, lift etc.complete. Excluding steel reinforcement. As department enigineer at site Raft

Providing and laying P:C:C 1:2:4 using 12 to 20mm HBG metal for Foundation including cost of all materials, transport, lead, Lift, labour, for laying concrete curing etc., complete as directed by the department engineer at site. (Without form work)

Providing and laing P:C:C 1:2:4 using 20mm HBG metal for Foundation including cost of all materials, transport, lead, Lift, labour, for laying concrete curing etc., complete as directed by the department engineer at site. (With form work)

Providing and laying RCC 1:1.5:3 using 12 to 20 mm HBG metal for concrete including cost of all materials, curing, labour ,lead, lift etc.complete. Excluding steel reinforcement .As department enigineer at site With form work (HV SIDE)

Providing and laying RCC 1:1.5:3 using 12 to 20 mm HBG metal for concrete including cost of all materials, curing, labour ,lead, lift etc.complete . Excluding steel reinforcement. As department enigineer at site ( With form work ) for Grade beam

Providing and laying RCC 1:1.5:3 using 12 to 20 mm HBG metal for concrete including cost of all materials, curing, labour ,lead, lift etc.complete. Excluding steel reinforcement .As department enigineer at site (With form work ) for Plinth Beam

Providing and laying RCC 1:1.5:3 using 12 to 20 mm HBG metal for concrete including cost of all materials, curing, labour ,lead, lift etc.complete. Excluding steel reinforcement .As department enigineer at site (With form work ) for Column upto Basement

Providing and laying RCC 1:1.5:3 using 12 to 20 mm HBG metal for concrete including cost of all materials, curing, labour ,lead, lift etc.complete. Excluding steel reinforcement .As department enigineer at site (With form work ) for RCC Wall

Providing and laying RCC 1:1.5:3 using 12 to 20 mm HBG metal for concrete including cost of all materials, curing, labour ,lead, lift etc.complete. Excluding steel reinforcement .As department enigineer at site (With form work ) for Column upto Parapet

Providing and laying and laying RCC 1:1.5:3 using 12 to 20 mm HBG metal for concrete including cost of all materials, curing, labour ,lead, lift etc.complete. Excluding steel reinforcement. As department enigineer at site (With form work ) for Lintel in ground floor

Providing and laying RCC 1:1.5:3 using 12 to 20 mm HBG metal for concrete including cost of all materials, curing, labour ,lead, lift etc.complete. Excluding steel reinforcement. As department enigineer at site (With form work ) for sun shade

Providing and laying RCC 1:1.5:3 using 12 to 20 mm HBG metal for concrete including cost of all materials, curing, labour ,lead, lift etc.complete. Excluding steel reinforcement. As department enigineer at site (With form work ) for Roof Beam

Providing and laying RCC 1:1.5:3 using 12 to 20 mm HBG metal for concrete including cost of all materials, curing, labour ,lead, lift etc.complete. Excluding steel reinforcement. As department enigineer at site (With form work ) for Roof Slab (130 mm thick)

Providing and laying RCC 1:1.5:3 using 12 to 20 mm HBG metal for concrete including cost of all materials, curing, labour ,lead, lift etc.complete. Excluding steel reinforcement. As department enigineer at site. (RCC Cable duct Wall )

Providing and laying RCC 1:1.5:3 using 12 to 20 mm HBG metal for concrete including cost of all materials, curing, labour ,lead, lift etc.complete. Excluding steel reinforcement. As department enigineer at site. (RCC Cover slab )

Supply, fabrication, sand placing in Position of steel reinforcement including cost of steel ,binding wire , Labour ,lead lift etc., Specification and as directed by the dept.engineer at site.

Brick Work in CM 1:4 using second class chamber burnt bricks for steps i LV Breaker & feeder plinth includung cost of all materials , Labours, lead ,lift etc. Complete.Specification and as directed by the dept.engineer at site.

Labour charges for installation of stub and cleats and template in position & allignment and shifting template from location to location and reassambling the same including cost of all labour, transport, lead, lift, etc., complete as directed by the department engineer at site.

Supply and provision of M8, M9, M10, M12 and M16 full thread GI Bolts and nuts & GI Washer of various sizes for erection of AB Switches and insulator or any other purpose wherever required and as directed by field engineer.20mm dia 1.2m Length

Supply and provision of M8, M9, M10, M12 and M16 full thread GI Bolts and nuts & GI Washer of various sizes for erection of AB Switches and insulator or any other purpose wherever required and as directed by field engineer.25mm dia 1.5m Length

Supply, fabrication, cutting and fixing the MS/GI angle, Chequered plate - 6mm thick the cost of all materials, transport,labour,lead, lift etc., complete as per IS Specification and as directed by the dept.engineer at site.

Supply, fabrication, cutting and fixing the MS/GI angle, Chequered plate - 6mm thick the cost of all materials, transport,labour,lead, lift etc., complete as per IS Specification and as directed by the dept.engineer at site.

Supplying and Laying vetrified tilles 600x600x8mm (Naveen, Johnson, bell make) in CM 1:3 in pointed with same colour cement including cost of all materials, labour, lead and lifts etc., complete as directed by the department at site.

Supplying and fixing MS grills for windows, collapsible gate etc., as per design, specification with painting one coat of red oxide over with one coat of enamel paint including cost of materials, labour, lead and lift etc., complete as directed by the department engineer at stie.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free as per standard specification. The window should be got approved from the Engineer-In-Charge before use on work. as per standard specification.

Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from un?plasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug

Supplying and fixing in position of sun control film in glazed window of approved quality and brand including cost of all materials, lead , lobour etc., complete as directed by the department engineer at site.

Supplying and providing 90 lbs rails in transformer plint and labour charges for fixing in correct position and aligenment as directed by dept.Engineer at site including cost of Rail, cutting charges , transport to site, labour, lead, lift etc. Complete as directed by the department engineer at site.

Supplying, laying of PVC pipe with required PVC bend L bend, union including cutting, jointing, wherever necessary earth work excavation refilling dismantling masonry if necessary including cost of all materials, lead & lift etc.., complete as directed by the department at site. 25mm dia

Supplying, laying of PVC pipe with required PVC bend L bend, union including cutting, jointing, wherever necessary earth work excavation refilling dismantling masonry if necessary including cost of all materials, lead & lift etc.., complete as directed by the department at site. 20 mm dia

Supplying and fixing Gun Metal wheel valve of approved brand (leader) ISI quality including cost of all materials, labour etc. complete as per standard specification and as directed by the department Engineer at site. 25mm dia

Supplying and fixing Gun Metal wheel valve of approved brand (leader) ISI quality including cost of all materials, labour etc. complete as per standard specification and as directed by the department Engineer at site. 20mm dia

Supplying and fixing in position CP bib cock of size 15mm dia with necessary cutting, threading and jointing using shellac etc., complete complying with standard specification and as directed by the departmental officers (The CP bib cock should be got approved by the Executive Engineer before use on works).

Supplying and fixing of Granite Stone of size 600x900mm for additional power Transformer inauguration culvert including cost of materials , Labour ,lead and lift etc., comlete.Specification and as directed by the dept.engineer at site.

Supply and filling with quarry dust inside the yard area including cost of all materials, labour, lead, lift, T&P, etc., complete and as directed by the department engieer at site

Spreading of metal in 20 mm size HBG metal for yard area with standard specification for filling over the consolidated earth in between the new rataining wall foundation etc., including cost of all labour, lead, lift etc complete as directed by the department engineer at site.

Labour charges for dismantling the Plain Cement Concrete met with below ground level during execution including labour, tools etc. complete. as directed by the department Engineer at site.

Labour charges for dismantling the Reinforced Cement Concrete met with below ground level during execution including labour, tools etc. complete. as directed by the department Engineer at site.

Plastering in CM 1:3 12 mm thick including cost of all materials, transport, curing, labour, lead, lift etc. complete.as per standard specification and as directed by the dept. Engineer at site .

Plastering in CM 1:4 12 mm thick including cost of all materials, transport, curing, labour, lead, lift etc. complete.as per standard specification and as directed by the dept. Engineer at site .

Painting 2 coats using white cement over one coat of priming coat for ceiling in all floors and exposed faces of beams including coat of all materials, scoffolding, labour with all lead, lift etc., complete as per specification and as directed and approved by the dept engineer at site

Painting two coats with Asian ACE or Equivalent make over one priming coat of cement paint and interior emulsion paint overplastered wall surface and other new surface and including cleaning , preparing the surface and curing etc., complete as per specification and as directed and approved by the dept engineer at site

Colour washing two coats using emulsion paint over two coats over a base coat of primer using exterior weather coat for outer surface including cost of all materials, labour, lead lift etc., complete as per standard specification and as directed by the department engineer at site.

Painting new iron works with two coats synthetic enamal paint over one coat of primer including cost of all materials , lead and lift etc., complete as per specification and as directed and approved by the dept engineer at site

Providng PVC down fall pipe using 110mm dia 4 Kg/sqcm, PVC pipe and PVC clamp lione supreme etc., includinng fixing PVC washer type door bend & shoe, in correct position and connecting from the roof slab including cost of all materials , Labour , trasport, lead ,lift,etc., complete, including PVC accessories and washers.

Supplying and Wiring with 2 x 1.5 Sqmm (22/0.3) PVC insulated single core unsheathed copper conductor cable of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box in flush with wall with 5A F.T.Switch covered with hylum sheet of 3mm thick with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC light point / Tubelight paint / Buzzer paint inclluding cost of all materials lead, lift, etc., complete - (SD - 23)

Wiring with 2 x 1.50Sqmm PVC insulated single core unsheathed copper multistand cable of 1100V grade in suitable heavy gauge M.S.Conduite pipe on wall and celling with MS accesories with 150x100x75mm Ms switch box inflush with wall ,with 3mm thick hylum sheet cover for 5A 3pin non interlocking flush type CS plug with painting of suitable colour with continious earthwire connection of 14SWG TC wire of open plug point .

Wiring with 2 x 4 Sqmm PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with suitable TW box in flush with wall to house the control switch regulator and covered with 3 mm hylem sheet with painting of suitable colour with continuous earth connection of 14 SWG TC wire for Open plug point (For rheostatic type regulator) std data - ( SD - 35)

Supplying and fixing of 5 amps 3 pin socket in the exisitng switch including 3 pin top.

Supply and fixing of 3 phase 4 wire 4way ICDB of 32 Amps per way with 63 A TPN MC switch with suitable trunking box MS cable entry and internal connection in suitable angle iron frame work with PWD earthing including the cost of all materials, labour, transport, lead,lift etc. as per standard specification and as directed by the department engineer at site.

Supplying and fixing box type 4'-40w single flouresent fitting complete with copper choke and condenser 1 no 4'-40w tube with T.W. round block on wall or ceiling with pvc unsheated leads from terminals to the fittings including the cost of all materials, labour, transport, lead, lift etc. as per standard specification and as directed by the department engineer at site.

Supply and fixing of 1400 mm sweep (56") AC ceiling fan complete with stepped electronic 300W regulator with 1metre down rod including fan clamp with side plates and cross arm of size 450 mm. including the cost of all materials, labour, transport, lead, lift etc. as per standard specification and as directed by the department engineer at site.

Supplying and fixing of water tight Bulk head fitting with guard and approved suitable make for incondescent lamp with guard and 100 w bulb.

Supplying and fixing of RCCB safe trip of appd LEGRAND , ISI make, 25amps with suitable box including cost of all materials , Labour , lead , lift ,etc., complete as per standard specifition.

Providing two legged scaffolding using 15cm dia-meter blue-gum props or casurina props or best quality bamboo props of 4 m overall length (3m height + 0.5m. In to the ground +0.5m Projection) the distance between the two rows being 1.25m, and the spacing of props being 2m, in both the rows with two horizantal props with 0.5m overlap on either side and braces at 2m,C/C includig longitudinal and transverse middle braces to stop up and providing a platfrom with country wood planks of 400mm, thick and 1m width , etc., in a complete from using coir and nails.

Supply and first aid box complete with all first aid medicines as directed by the engineer at site including cost of all materials , labour with all leads and lifts etc., complete

Supply and laying of cooling tiles with CM 1 :3 and mixing Dr.FIXIT liquid including cost of all mateials , labour with al leads and lifts etc., complete.

GST for bidders within TamilNadu

GST for bidders outside TamilNadu (IGST)

S & G CONSTRUCTION (BID ID -1292752)