SPECIAL REPAIR TO BLDG NO P-61 AND P-62 AT JALIPA MIL STN UNDER GE (A) BARMER

Amount

Taking down cement or cement lime plaster, any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc including removing rubbish to out side MD land complete all as specified and as directed.

Rendering internally 15 mm thick in cement mortar 1:6 on stone wall surfaces finished even and smooth with out using extra cement complete all as specified and as directed.

M&L 15mm thick rendering in cement mortar 1:4 on fair faces stone wall surfaces (external wall surfaces) mixed with water proofing compound as permanufacturers instructions and finished the surfaces even and fair without using extra cement complete all as specified and as directed by Engineer-in-Charge. Note :- WPC will be measured and paid separately.

M&L for plastering 5 mm thick in CM 1:3 on stone/ concrete surfaces of ceiling , finished even and smooth without using extra cement complete all as specified and as directed. .

Preparation of new plastered or un-plastered surfaces of walls and applying two coats of cement base paint over a coat of white wash to match with the existing surface complete all as specified and as directed.

Preparation of new plastered or un-plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over one coat of primer on walls including and over two coat of birla wall care putty complete all as specified and as directed.

M&L 25mm thick (average) PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate in base course, the surface of concrete is to be finished even and rough with out using extra cement complete all as specified and as directed.

M&L 75 MM thick PCC 1:3:6 type C2 using 40mm graded stone as in floors/plinth protection etc finished even & fair complete all as specified and directed by Engineer-in-Charge.

Taking down chowkats or frames (without taking of shutters from the frames) area exceeding 1.5 not exceeding 4.0 sqm each complete all as specified and as directed.

Pressed steel frames of size 165X60mm of 1.25mm thick for doors with one or more rebates including necessary fixing lugs. hinges, lock strike plate,etc., complete all as specified and as directed.

Pressed steel frames of size 105X60mm of 1.25mm thick for doors with one or more rebates including necessary fixing lugs. hinges, lock strike plate,etc., complete all as specified and as directed.

S&F for 35 mm thick second class hard wood factory made plain, framed, panelled shutters, with lock rail and panel of 9mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and Style as per IS:1003 (Part-1), kiln seasoned and chemically pressure treated complete all as specified and as directed.

M&L 35mm thick factory made 2nd class HW glazed and skelton shutter and open rebated and prepared to receive glass, gauge etc (without sash bars), edges or framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR Part-I Section 8 Clause 8.24 (a) complete all as specified and as directed.

S & F in repairs 300 mm long, brass ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F for 100mm size, butt hinges,Mild steel including necessary welding if required complete all as specified and as directed.

Preparation of new or previously untreated old decorated wooden surfaces of any description, not otherwise described over 10cm width and girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Preparation of old decorated wooden surfaces of any description, not otherwise described over 10cm width & girth and applying one coat of synthetic enamel paint complete all as specified and as directed .

Taking down chowkats or frames (without taking of shutters from the frames) area not exceeding 1.5 Sqm each complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specifications complete all as directed .

S&F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified and as directed.

S&F 150 mm size aluminium anodised handles, caste type, complete all as specified and as directed.

S&F 150mm size aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.

S&F 100mm size aluminium anodised butt hinges of extruded section complete all as specified and as directed.

S&F 250 mm length aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed .

S&F sheet glass 3.00mm thick, ordinary quality ,in squares not exceeding 0.5 Sq.m in each pane complete all as specified and as directed.

Preparation of new or previously untreated steel surface of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red- oxide, zinc chrome primer complete all as specified and as directed.

Demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles and removing rubbish to out side MD land complete all as specified and as directed..

M&L squared rubble jodhpur type brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and as directed .

Taking down and refixing after greasing easing and minor repair i.e. welding etc in same opening steel rolling shutters, including steel sheet, gear cranks, handles levers lock, spring, bearings etc as specified including top cover anchoring rod hasp and staple and one coat painting over a coat of primer, erected in position as indicated complete operating of manually/mechnically type complete all as specified and directed.

S&F factory made steel windows with side hung shutters including projecting type hinges with glazing bars and steel handle, peg stay complete all as specified and as directed.

S&F factory made steel ventilator with center hung shutters including two pairs of brass cup pivots, catch spring and pulley wheel complete all as specified and as directed.

Rolled mild steel sections like angle, channel, flat, square etc as in framed work such as grills, gratings, etc, with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars ,barred iron doors; ladders ; framed balusters walk ways railings framed work of water tanks and similar work confirming to Fe-290Gde E-165 complete all as specified and as directed.

S&F glavanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aparture 1.00 mm and fixed with tinned tack or galvanised wire stapples complete all as specified and as directed.

Taking up or down 15mm bore steel tubing and connections including cleaning for refixing or credited to contractor complete all as specified and as directed.

Taking up or down 20mm bore steel tubing and connections including cleaning for refixing or credited to contractor complete all as specified and as directed.

S&F GI tubing (ISI marked) 15mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floorscomplete all as specified and as directed.

S&F GI tubing (ISI marked) 20mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floorscomplete all as specified and as directed.

Refixing old GI water tubing of 15 mm bore, medium grade including all new / old fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls, ceiling or laid on floors and connections complete all as specified and as directed.

Refixing old GI water tubing of 20 mm bore, medium grade including all new / old fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls, ceiling or laid on floors and connections complete all as specified and as directed.

S&F 500 ltrs capacity rotational moulded polythene water storage tanks white three layered (ISI marked) (Cylinderically vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I including taking down old tank complete all as specified and as directed.

S&F in repair stop valves, cast copper alloy, CP fancy type, screwed down, high pressure with crutch or butter fly handle, screwed both ends for 20 mm bore iron pipe or for unions complete all as specified and as directed.

S&F in repair, bib tap, CP fancy type, cast copper alloy with crutch or butter fly handle, screwed down, screwed for 15mm bore iron pipe or for brass ferrule complete all as specified and as directed.

S & F in repairs vitreous china ware wash hand basin, white, flat back of size 300 X 450 mm including 32 mm dia brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, 32mm bore PVC flexible waste pipe,PVC connection15mm size with PTMT nuts of length 450mm long including pillar tap, cast copper alloy, chromium plated, 15 mm dia, with capstan head, screwed down high pressure with or with out lettered "Hot" or "Cold" with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and as directed.

S&F in repair, stop valve / angle valve, CP fancy type, cast copper alloy with crutch or butter fly handle, screwed down, screwed for 15mm bore iron pipe or for brass ferrule complete all as specified and as directed.

S&F in repairs 10 ltrs capacity PVC valve less, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets and flush pipe of 32mm dia jointed including cutting of floor/ wall and making good with cement mortor 1:3 to match with the existing surfaces complete all as specified and as directed.

S&F in repairs, PVC connections 450mm long, 15mm bore with brass fly and washers on both ends complete all as specified and as directed.

S & F in repairs, brass chromium plated shower rose of size 125mm with or without swivel joints fixing to steel pipes complete all as specified and as directed.

S & Fin repairs 75mm bore cast iron nahani trap with grating including jointing to waste pipe, fixed in cement concrete type B1, 1:2:4 complete all as specified and as directed.

S & F in repairs sheet glass shelf aasembly consisting of 5.5mm thick sheet glass shelf 120 mm wide with chromium plated bracket guard and railing of 600 mm long complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet pan [Pedestal pattern], white [excluding flushing cistern and flush pipe] including plastic water closet seat back closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and 'P' or 'S' trap complete all as specified and as directed.

Demolition of wall / floor tiling of any description including cement mortar bedding / backing coat and removing rubbish to out side MD Land complete all as specified and as directed.

Glazed coloured ceramic tiles of size 450mmx350mmx7mm/ 450mm x 300mm x 7mm thick on vertical surface of wall over and including 10mm thick backing coat in CM 1:4 set and jointed in neat cement slurry and pointed in white cement / coloured cement to match the tiles complete all as specified and as directed.

Non skid ceramic tiles, coloured, of size exceeding 0.11 Sqm but not exceeding 0.38 Sqm, 7 to 8 mm thick [Square or Rectangular] as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 complete all as specified and as directed.

Non skid ceramic tiles, coloured, of size exceeding 0.18 Sqm but not exceeding 0.38 Sqm, 7 to 8 mm thick [Square or Rectangular] as in skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles including screed bed or bedding layer of mortar 10 mm thick in cement mortar 1:3 complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position including removal of existing water proofing treatment of any description and bedding in any type of roof and removing rubbish to out side MD Land complete all as specified and as directed.

Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick [horizontal or sloping] including rough finished surfaces complete all as specified and directed.

Use and waste formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide includingrough finished surfaces complete all as specified and directed.

M&L TMT steel bars of 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed.

M&L TMT steel bars of 5mm to 10mm dia bars as in stirrups, spacers & binders and also use in cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed.

RCC M-25 design mix as in slabs supported on walls, beams and colunms in floors,roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

RCC M-25 design mix as in beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and as directed.

M&L Machine cut kota stone slab flooring using 18 to 20mm thick , laid and jointed with grey cement slurry mixed with a admixture of pigment to match shade of slab including rubbing and polishing to smooth mirror finish over and including 15mm thick CM 1:6 on backing coat on brick or concrete surfaces including dismantling old flooring including cement mortar bedding and rubbish of the premises complete all as specified and directed.

M&L Machine cut kota stone slab as in skirting using 18 to 20mm thick , laid and jointed with grey cement slurry mixed with a admixture of pigment to match shade of slab including rubbing and polishing to smooth mirror finish over and including 10mm thick CM 1:4 on backing coat on brick or concrete surfaces including dismantling old Skirting including cement mortar bedding and rubbish of the premises complete all as specified and directed.

Demolition of cement concrete of any description and in any position including removal of existing water proofing treatment of any description and bedding in any type of roof and removing rubbish to out side MD Land complete all as specified and as directed.

Preparing the surfaces of roof slab by brushing with wire brushes for removing of loose / dirt materials etc., and sweeping with brooms or gunny bags or mechanical device etc., and applying neat cement slurry with 3kg of cement per sqm complete all as specified and as directed.

M&L 40mm thick PCC 1:2:4 type B-0 using 12.50mm graded stone aggregate as in floors and finishing the surface even and smooth with using extra cement complete all as specified and as directed .

M&L screed 10 mm thick in CM 1:3 on roof for laying of water proofing treatment using with liquid water proofing compound as per manufacturer instructions complete all as specified and directed. NOTE:- liquid WPC shall be measured and paid separately under respective item.

M&L for Applying a coat of bituminous primer @ 0.4 litre / Sqm manufactured by the same agency that of APP with a density 0.87 to 0.89 Kg/litre at 25 degree celsius on prepared plastered surfaces.complete all as directed and specified by Engg-in-charge.

M&L APP based polymeric modified membrane minimum weighing not less than 3kg / Sqm and minimum 3mm thick reinforced with polyester non woven fabric weight not less than 150 gms / Sqm over primed surface, by torch application method with 150mm over lap on length side complete all as directed and specified by Engg-in-charge.

Supply only Liquid water proofing compound ISI Marked

Preparation of new plastered or un-plastered surfaces of roof and applying two coats of aluminium paint over a coat of primer to match with the existing surface complete all as specified and as directed.

M&L providing PCC 1:2:4 type B-0 using 12.50mm graded stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edge, finishing the surface even and smooth with using extra cement complete all as specified and as directed .

M&L for augmentation of RCC by using Dr. Miracle system of M/s AAYKA polymers or equivalent of M/s FOSROC / Dr. Fixit, by pressure grouting @1 to 2 kg per sqm complete all as specified and directed.

M&L for providing AQUAVENTS of M/s AAYKA polymers or equivalent of M/s FOSROC / Dr. Fixit by moisture release system in roofs complete all as specified and directed.

M&L for polymer modified polymer coat with MRP glass membrane on roof/water tank top surface by using AQUAPROOF 102 of M/s AAYKA polymers @ 4 kg per sqm complete all as specified and as directed.

M&L for ESKOO heat reflective cum water proofing system @2 kg per sqm of M/s AAYKA polymers or equivalent of M/s FOSROC / Dr. Fixit complete all as specified and as directed.

M&L for micro cement concrete of M/s AAYKA polymers or equivalent of M/s FOSROC / Dr. Fixit , pre packed single component, chloride free , sulphate free, non shrink, free flow, self compacting / ready to use after mixing of required quantity of water as per manufacturer instructions is required to achieve high strength, dual shrinkage, compensated, micro complete repair with compressive strength of 40 Mpa at 28 days complete all as specified and as directed.

S&F 12mm TS dowel pins/ staple/ shear pins M/s AAYKA polymers or equivalent of M/s FOSROC / Dr. Fixit including drilling holes in concrete and epoxy for grouting the pins complete all as specified and as directed .

S&F 6mm TS dowel pins/ staple/ shear pins M/s AAYKA polymers or equivalent of M/s FOSROC / Dr. Fixit including drilling holes in concrete and epoxy for grouting the pins complete all as specified and as directed .

Taking down steel windows and ventilators ( glazed / fly proof) of any description complete all as specified and as directed.

Dismantling of cast iron pipes of 100mm internal dia including fittings, jointed in cement mortar complete all as specified and as directed.

S & F sand cast, cast iron, soil / waste / vent pipes, 100mm bore, in any length with or without ears, jointed with cement sand mortar, fixed to walls with and including MS clamps complete all as specified and as directed.

S& F in repairs tubular towel rails 20 mm dia Anodised Aluminium including brackets complete all as specified and directed.

S& F in repairs stainless steel tubuler curtain rails etc 25 mm dia with fixing brackets incl 8 Nos of PVC rings per running meter of curtain rail complete all as specified and directed

Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc . removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls,floors, etc, complete all as specified and as directed.

Taking down un-serviceable DB of any size and capacity including MCB etc, and removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls,floors, etc, complete all as specified and as directed.

M&L Point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multi stranded copper conductor, nominal cross-sectional area is 1.5 sq mm , single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No.in and including in PVC casing & caping with all fittings and accessories , complete fixed on wall/roof/floor etc, with1.6mm thick mild steel/prestressed steel sunken/concealed box (with earth dolly) duly painted two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally and two coats of black bituminous paint over a coat of red oxide primer externally, with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets and fan regulators etc, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly for,one way switch One light/fan/ bell point controlled by one, one way switch complete all as specified and directed .

All as per serial item No 93.00 above but for 5 Amps socket on same board with other switches.

All as per serial item No 93.00 above but for 5 Amps socket point on independent board.

All as per serial Item No. 93.00 above but for 15 Amps 6 Pin socket point on independent board with 4.00 Sqmm PVC insulated FRLS multi-stranded copper conductor with 4.00 Sqmm PVC insulated FRLS multi-stranded copper conductor as earth wire complete all as specified and as directed.

S&F switch piano 5 Amp flush type single pole one way with ISI marked,complete all as specified and as directed.

M&L bell push, 5/6 Amps, 230 Volts complete all as specified and as directed.

S&F socket outlet 5 Amps 2-in-1, 3/5 pin 230 V AC flush type, complete all as specified and as directed.

S&F switch socket outlet, 3/5 pin , 5 Amps, flush type, universal ,230 Volts controlled by one switch complete all as specified and as directed.

S&F switch socket outlet, multipurpose, 3 in 1, 5 and 15 Amps, flush type, universal ,230 Volts controlled by one switch complete all as specified and as directed.

S&F ceiling rose, 50 mm dia, 3 phase / PVC / Polycarbonate, isolated body two to three terminals complete all as specified and as directed.

M&L buzzer, ding dong / multi music type, AC, 230 Volts complete all as specified and as directed.

S&F in replacement of LED tube light fitting 20W 4 feet PVC extruded with batten ( integrated driver), 6500K colour temp, decorative type with all accessories internally pre wired including retrofit T5 polycarbonate tube with connector block and connectiong up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed Make : Havells / Bajaj /Philips / CG

S&F in replacement of Electronic fan regulator, stepped type, 100 W, AC, 230 Volts, fixed on existing laminated sheet complete all as specified and as directed.

S&F in replacement of LED streetlight 30W made up of pressure die cast housing with prismatic polycarbonate diffuser and individual LEDs with secondary optics and IP65 protection. including bracket as required length with clamp nut, bolts washers etc & connecting, testing and taking down unserviceable light fitting complete all as specified and as directed. Make : Bajaj Cat Part No.BCLST 30W or techno commercially equivalent model of make Philips / CG / Havells

Taking down unserviceable sub main wiring with copper/aluminium conductor,PVC insulated,unsheathed cable of any size drawn through and including rigid PVC or PVC casing & caping including cutting chases for cinduits and making good disturbed surfaces complete all as specified and as directed.

M&L for submain wiring with two runs of 6 sqmm with one run of 6 Sqmm earth wire of 1100V grade FRLS PVC insulated multi-stranded copper conductor, single core cable conforming to IS 694 drawn through and including PVC casing & caping fixed on wall / ceiling with PVC saddles and cadmium plated steel screws and connected to common earth dolly complete all as specified and directed. Note :- Three runs of 6 sqmm and one run of PVC casing & caping shall be measured as one length for the purpose of measurement.

S&F in repair factory made distribution board in sheet metal enclosure in double door with 200A rated bus bar,SPN 8 way, 240V for fixing MCB's complete all as specified and as directed.

S&F in repair factory made distribution board in sheet metal enclosure in double door with 200A rated bus bar,SPN 4 way, 240V for fixing MCB's complete all as specified and as directed.

S&F in replacement of MCB SP ‘C’ Curve 10KA, 6 to 32 amps 240 volt complete all as specified and directed .

S&F in replacement of MCB SPN ‘C’ Curve 10KA, 6 to 32 amps 240 volt complete all as specified and directed .

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium stranded conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular complete all as specified and as directed.

S&F in replacment 1400mm sweep ceiling fan minimum three star rating complete all as specified and as directed.

S&F in replacement of Exhaust fan 300mm sweep including provision of 3 core 23/0.0076 size flexible copper cable from ceiling rose to fan complete all as specified and as directed.

M&L for earthing complete with galvanized steel earth plate electrode of size 60cm x 60cm x 6mm thick burried directly in ground vertically at a depth not less than 2.25 metre deep below normal ground level with top edge of the plate not less than 1.5 metre below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal dust and common salt, filling in alternate layer and electrode connections by using galvanized iron earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers made of galvanized iron or steel and protected by light grade 15 mm dia GI pipe connected to main switch board or main control board, and GI pipe light grade 20 mm bore for watering and including funnel, wire mesh, RCC pit cover and PCC chamber pit with PCC 1: 2: 4 type C2 including excavation and earth work, disposal of surplus soil to a distance not exc. 50 mtr all as specified and as shown on Plate No 5 of SSR Part I (1991)incl dismanteling of existing unserviceable earth pit all as specified and directed by Engr-in-Charge.

AMBEY MAA CONSTRUCTION COMPANY

Devi Engineeing

M/s Malinath Electricals

Kusum Traders