B/R PETTY REPAIR WORKS OF GE OFFICE COMPLEX, DLRL LAB AND AGE E/M OFFICE COMPLEX AND OTHER AREAS UNDER AGE B/R-I, HYDERABAD

Amount

S&F in repairs 32mm/38mm dia waste pipe for WHB,& sink etc complete all as specified and as directed (Length of pipe nexc 1.00mtr)

S&F in repairs waste coupling of 32/38 mm dia of PTMTsuitable for wash basin/ sink half or full threaded complete all as directed.

S&F in repairs plastic water closet seat cover, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging devise complete all as directed.

Supply only M-seal in 100 grams packet.

S&F in repairs PVC connections of 15mm size,450mm long with PTMT nuts complete all as directed.

S&F in repairs PVC connections of 15mm size with PTMT nuts of length 600mm complete all as directed.

S&F 15mm dia medium grade GI tubing with all fittings and fixtures fixed to walls, ceilings etc including taking down existing pipe complete all as directed.

S&F 20mm dia medium grade GI tubing with all fittings and fixtures complete fixed to walls, ceilings etc including taking down existing pipe complete all as directed.

S&F 25mm dia medium grade GI tubing with all fittings and fixtures complete fixed to walls, ceilings etc including taking down existing pipe complete all as directed.

S&F 15mm dia GI fittings ( nipples, elbows, reducers, Tee, sockets, unions and tank nipples etc )

S&F 20mm dia GI fittings ( nipples, elbows, reducers, Tee, sockets, unions and tank nipples etc ) complete all as directed.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F in repairs two way CP brass Bib taps 15mm dia with capstan head and flange

S&F in repairs 15 mm dia pillar tap cast copper alloy with crown or capstan head , chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as directed.

S&F in repairs 15mm dia swan neck taps cast copper alloy chromium plated with crown or capstan head, screwed down, high pressure screwed for iron pipe complete all as directed.

S&F in repairs 15mm dia stop valves /angle cock / concealed stop cock, fancy type, cast copper alloy, chromium plated screwed down high pressure with crown or capstan head screwed both ends for iron pipe complete all as directed.

S&F in repairs CP brass Bib taps 15mm dia fancy type with capstan head and flange complete all as directed.

S&F in repairs 32 mm dia PVC flush pipe suitable for low level PVC flushing cistern.

S&F in repairs 10 litres capacity, PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and suitable flush pipe PVC 32mm dia complete all as directed

S&F in repairs PVC water tank covers of any size & capacity complete all as directed.

S&F in repairs CP push button cock of 15 mm dia cast copper alloy, screwed for iron pipe.

S&F in repairs urinal spreader CP for fixing with 15 mm dia pipe.

S&F in repairs CP framed stainless steel grating 202 grade Stainless Steel 304 Lock Drain Grating & Frame with or without hole including fixing with white cement complete all as directed.

S&F in repairs gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe, suitable for 15mm bore complete all as directed.

S&F in repairs gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe, suitable for 20mm bore complete all as directed.

S&F in repairs 15mm dia ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 210gms)

S&F in repairs 20mm dia ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 210gms)

Supply only White cement, ISI marked, in 1 Kg packing

Supply only Dr fixit liquid Integral water profing compound

Supply only Aluminium alloy butt hinges with galvanised mild steel hinge pin, anodised and fixed, ISI marked, 100mm long .

Supply and fixing Mild steel butt hinges medium weight, cold rolled, 100mm, ISI marked, fixed with stainless steel screws complete all as specified and directed.

Supply and fixing 150mm long aluminium anodised barrel tower bolt, extruded section,fixed with stainless steel screws complete all as specified and directed.

Supply and fixing 200mm long aluminium anodised barrel tower bolt, extruded section,fixed with stainless steel screws complete all as specified and directed.

Supply and fixing 200 mm size extruded aluminium aluminium alloy handles fabricated type, anodised fixed with stainless steel screws complete all as specified and directed.

Supply and fixing 250 mm aluminium alloy, anodised sliding door bolt with hasp staple (bolt type) fixing clips of sheet, cast or extruded setions and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed with stainless steel screws complete all as specified and directed.

Supply and fixing in repairs floor door stopper 100 mm size of aluminium alloy body and anodized.

Supply and fixing in repairs door closer hydraulically regulated,designation No. 2,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and directed.

Hacking out old broken glass (any thickness size quality or description) from wooden frames or stone, concrete or brick surrounds glazing with putty or fixed with beads and S&F 3.0mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 Sqm in each panes complete all as specified and directed.

Hacking out old broken glass (any thickness size quality or description) from wooden frames or stone, concrete or brick surrounds glazing with putty or fixed with beads and S&F 4.8 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.50 Sqm in each panes complete all as specified and directed.

Hacking out old broken glass (any thickness size quality or description) from wooden frames or stone, concrete or brick surrounds glazing with putty or fixed with beads and S&F 3.0mm thick frosted glass ordinary quality and glazing with oil putty in square n exc 0.50 Sqm in each panes complete all as specified and directed.

S&F in repairs Aluminum handles, fabricated type, anodized 100mm long, ISI marked all as specified.

S&F in repairs Neoprene/EPDM gasket for fixing glass in door / windows complete all as directed

Hacking out old broken glass (any thickness, size, quality or description) from wood/steel frame including punching or drilling out old glazing pins/spring clips and supply and fixing 5.50 mm thick plain sheet glass and glazing with oil putty in squares exc 0.50 Sqm in each pane complete all as directed.

M&L for 12mm thick particle board prelaminated on both sides including taking down old all as directed.

S&F 100 mm mortice lock with 4 levers for aluminium door all as directed.

M&L 2nd class hard wood plain fillets, square, rectangular or triangular in section, clean sawn, of size exc 3 Sqcm and nexc 6 Sqcm in cross section all as directed.

Supply only silicon sealant for UPVC windows, acp cladding complete all as specified.

S&F brass internal fittings / spindles like fittings for any type of taps complete all as specified.

S&F urinal brackets 02 piece set with fixing screws all as directed.

S&F wash hand basin brackets 02 piece set with fixing screws all as directed

Cleaning and removing all scale and dirt etc from water tanks of capacity exceeding 500 ltrs and not exceeding 1000 ltrs from mouths of circulating pipes etc complete all as directed.

Cleaning and removing all scale and dirt etc from water tanks of capacity exceeding 1000 ltrs and not exceeding 2000 ltrs from mouths of circulating pipes etc complete all as directed.

M&L for Writing letters or figures (Block. Roman, Italic or Indian) n exc. 30 cm high text shall be “TANK CLEANED ON DD/MM/YYYY”

Complete removal of trees/plants, upto roots growth on bldg's roofs, chajjas, at junctions of pipe line fixed on walls and walls coming on bldgs and removing the material (Branches and plants ) to outside MOD land complete all as directed Note : Work to be carried out up to 04 storey building.

S&F factory made UPVC top hung glazed and wire gauzed ventilator made of frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and glazed shutter with plain glass 3 mm thick pin head/frosted glass alongwith mosquito proofing shutter with stainless steel wire cloth 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperature,single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, Reinforced with G/J/U/O shape galvanised MS section considering structural/wind load requirements. Ventilator to be provided with proper operative and locking hardware mechanism, including taking down old ventilators all as specifed.

Supply & fixing of UPVC windows or UPVC framed portion 3 track sliding window with two glazed and one wire mesh sliding shutters of profile width of frame 50 mm to 60 mm, limit thermal conductivity to l.3 Kcal/sqm/hr centigrade, sound insulation up to 4-0 bds, Density, 1.46 gm/ml, Tenstile strength - 43.9N/sqmm, % Elongation at break - 215, Tenstile mpduls - 2840N/Sqmm, Flexural strength - 51N/sqmm, Heat aging at 150 degrees - No surface defect, Thickness - 2 mm, Flexural moduls elasticity 2200N / sqmm, double baskets & wool pile on window, multi point gear locking at different sides of frame, anti lift device on slide windows with temper proof screws with and including glazed shutter fixed with 5 mm thick glass & wire mesh shutter with stain less steel wire cloth 304 grade stainless steel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperature complete incl 3.00mm glass incl taking down old down old window complete all as specified. all as directed .

Taking down chowkats or frames but with shutters (with out taking off shuttersfrom the frames) not exc 1.5 sqm each complete all as specified and directed.

Taking down chowkats or frames but with shutters (with out taking off shutters from the frames) Exc 1.5 sqm but n. exc 4 sqm each complete all as specified and directed.

Taking down shutters of any description exc 1sqm but n. exc 2 sqm each complete all as specified and directed.

Supplying & fixing solid PVC door frames of sizes 50mm x 47mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with prelam sheet reinforced with MS Square tube complete all specified and as directed.

S & F factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded prelam PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelam colour PVC sheets for top rail , lock rail and bottom rail on either side and as gap insert for top rail and bottom rail , both side prelam PVC sheet used insted of plain colour PVC sheet. Stile and rail feathered at edges paneling of prelam solid sheets 10 mm thick to be fitted in the MS framewelded, sealed to the stiles and rails with suitable PVC sheet beading , and jointed together with solvent cement complete all as specified in SSR Part -II.

S&F factory made 30mm thick flush shutters, solid core construction,with particle board core and plywood face panels,commercial type, both faces covered with decorative face veneer with lipping/frame to match complete all as specified and directed.

S&F factory made 30mm thick flush shutters, solid core construction,with particle board core and plywood face panels,commercial type, complete all as specified and directed.

S&F 35mm thick factory made 2nd class HW glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauze etc size of members as specified in SSR part-I, section 8, clause 8.24(a) supplied and fixed to chowkats, including M&L for providing members of 2nd class HW wooden stiffeners of size 60x30mm horizontally and vertically to each top panel and vertically to each bottom panel of wire gauge shutter complete all as specified and directed

S&F in repairs galvanised mild steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with 2nd class hard wood beading suitable for existing wooden doors including making holes/ cutting rusted bolts and nuts on steel windows and provision of new nuts and bolts suitable for MS beading complete all as directed.

S&F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

S&F powder coated anodised aluminium window and ventilator shutters, sliding / casement type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, guide channel two track anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) including 5.0 mm thick glazing & taking down existing window / ventilator complete all as specified.

M&L for rectangular aluminium hollow section of size 101.6 x 44x2mm thick as in partition (including fixing with nut and bolt in floor and wall by drilling holes), powder coated of approved colour for both vertical and horizontal member including 5.5mm thick glass, 12mm thick particle board prelaminated on both side, aluminium legs, aluminium glazing channel, rubber beading as required complete (Size of panel nexc 01 Sqm each) incl taking down old partition all as directed.

_ditto_ all as per item above but as in door, powder coated, approved colour, including 5.5mm thick glass, 12mm thick particle board prelaminted on both side, rubber beading, aluminium glazing channels, two Nos handle D type 250 mm long, one no 200mm aluminium powder coated barrel tower bolt of extruded section, 100mm size brass mortice lock, 4 levers with two keys and one floor door spring per leaf incl taking down old door complete all as specified and directed.

M&L non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) first quality area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid on and including 20 mm thick screed bed in cement mortar (1:6) including dismantling existing tiles with screed bed complete all as directed.

M&L Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid on and including 20 mm thick screed bed in cement mortar (1:6) including dismantling existing tiles with screed bed complete all as directed.

M&L Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirtings etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid on and including 10 mm thick screed bed in cement mortar (1:4) including dismantling existing tiles with screed bed complete all as directed.

M&L for glazed ceramic tiles of size 300x450x7 mm thick vertical surfaces such as skirting/dado jointed in neat cement slurry and pointed with white or coloured cement to match the colour of the tiles laid on and including 10mm thick rendering in cement mortar (1:4) including dismantling of existing tiles along with a backing coat complete all as directed.

M&L for Granite (of any type) tiles 18 to 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting,rounding edges and polishing laid on and including 15mm thick screed bed in cement mortar (1:6) including taking down existing stone slab/ tile complete all as directed.

M&L cement concrete tiles 30cm x 30cm x20 mm thick with grey cement and pigment set jointed and pointed in neat cement slurry in floors laid over 15 mm thick screed or bedding layer in CM (1:6), including dismantling existing floor tile of any descrption complete all as directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F MS framed work as in tubular trusses, purlins, posts and the like fixed with angle cleats and connecting plates etc. including necessary cutting and welding etc fixed in position as specified.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of approved colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws including dismantling existing sheet of any description all as directed.

S&F in repairs Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in valley gutters, fixed to existing sheeting supports including dismantling existing sheet of any description and necessary scaffolding etc all as specified and as directed.

M&L for prepration of new steel surfaces of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide complete all as specified and directed.

S&F aluminium anodised snap grid frame work for false ceiling grid size 605x605 mm with runners aluminium anodised main Tee of section 35x35x1.5 mm thick, cross Tee of section 25x25x1.5 mm thick and aluminium anodised angle of size 25 mm x 1.5 mm thick section fixed along side of wall including hanging from ceiling with 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete including dismantling of old false ceiling all as specified

M&L for providing 12mm thick Gypsum board as in ceilings fixed with screws as per manufacturers instructions and finished with two coats of plastic emulsion paint over a coat of primer on exposed surfaces complete all as specified.

M&L for providing 10 mm thick PVC insulation false ceiling tiles with EPS stuck to 1 mm plain PVC sheet suitably placed in false ceiling grid made suitable to fix tiles as per manufacturer's instructions, fixed at any height complete all as directed.

S&F stainless steel grade 304 railing 68mm dia hand rail and 3 Nos 16mm dia horizontal rails and 40mm dia balusters fixed at 900 mm centre to cnetre with clamps and dash fastener including newel post of 75 mm dia with spherical cap fixed at starting and terminal point of railing incl taking down old stair case railing of any description complete all as specified.

S&F PVC (SWR) pipes,150 bore of pipe, single socketed, in any length with rubber ring joints, fixed as in rain water pipes /spouts etc including making necessary holes in walls or parapet and making good with cement mortar (1:4) and taking down old rain water pipes of any description and in any position complete all as specified and directed.

S&F in repairs 150mm PVC (SWR) bends any radius complete all as directed.

S&F 12 mm thick toughened plain glass as in roof / wall tension/projection/door/ panelling including necessary rubber neoprene packing and fixing with old aluminium snap beadings and screws, fixed in position complete in all respect including taking down broken glass of any description and in any position complete all as specified.

M&L for interlocking machine pressed precast concrete paver blocks of approved tint, shape and size confirming to IS 15658-2006 of 60 mm thickness M-30 Grade, as in floors/pavings laid over 40 mm thick sand cushioning layer including dismantling existing floor tile of any descrption complete all as specified.

S & F Aluminium grill of make "Deco grill" ,DG - 104 model or any other equivalent approved make fitted in to suitable Aluminium channel , 'F' section and fixed to windows/ ventilators including making provision for opening of window / ventilator and taking down existing grill complete all as specified and directed.

S&F in repairs Multicolor double layered black out fabric roller zebra blinds horizontal type including hanging mechanism water resistant, UV protection for window etc fixed complete all as directed.

S&F solid PVC Wall panelling consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame including taking down existing boarding complete all as directed.

Sai construction & services (BID ID -3413907)

SUN LIGHT HOUSE (BID ID -3414194)

ELEVATORS MAINTENANCE ENGINEER WORKS (BID ID -3414417)

MOHAMMED GHOUSE (BID ID -3414617)

PAVAN ENTERPRISES (BID ID -3413545)

SRI SAI ENTERPRISES (BID ID -3413820)

Anjana corporation (BID ID -3413815)

SM CONSTRUCTIONS (BID ID -3413901)