CONSTRUCTION OF COURT BUILDING AT SHIRUR (GHOD NADI), TALUKA SHIRUR, DIST.PUNE (INCLUDING ELECTRICAL WORK)

Amount

Removing grass gazer grass and disposing off out of building premises including making clean the ground by showel and pharas etc. complete.

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling,ramming , watering including shoring and strutting etc. complete including all leads and lifts By Mechanical Means.

Excavation for foundation in Hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling,ramming ,watering including shoring and strutting etc. completeincluding all leads and lifts. By Mechanical Means.

Excavation for foundation in Hard rock by chiselling,wedging, line drilling,etc.including tri millimetre ing and levelling the bed,removing the excavated material upto a distance of 50 metres beyond the building area stacking as directed, dewatering and back filling with available earth/ murum watering, ramming etc. complete. including all leads and lifts. By Mechanical Means

Providing preconstructional antitermite treatment as per Indian Standard 6313 (Part-II) treatment by treating the backfill in i millimetre ediate contact with foundation at the rate of 7.5 liters of emulsion Concentrates of 0.5 percent of Clorophyriphas/ Hephoclore per square meter of vertical surface area covering 10 years guarantee.

Providing and laying Cast in situ/Ready Mix cement concrete in Mix-15 of trapmetal for foundation and bedding including bailing out water, formwork,laying / pumping, compacting, roughening them if special finish is to be provided,finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled Concrete Batch Mix Plant (Pan mixer) etc.complete. With natural sand/ Vertical shaft impact (VSI) quality Artificial Sand

Providing and laying in situ/Ready Mix cement concrete Mix-25 of trap metal for reinforced cement concretework in foundations like raft, strip foundations, grillage and footings of reinforced cement concrete columns and steel stanchions etc.including bailing out water, formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc.complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/ Vertical shaft impact (VSI) quality Artificial Sand .

A) Ground Floor Providing and laying Cast in situ/Ready Mix cement concrete Mix-25 of trap metal for reinforced cement concrete columns as per detailed designs and drawing or as directed including steel centering,formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand Vertical Shaft Impact (VSI) Grade finely washed etc.)

B ) First Floor Providing and laying Cast in situ/Ready Mix cement concrete Mix-25 of trap metal for reinforced cement concrete columns as per detailed designs and drawing or as directed including steel centering,formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand Vertical Shaft Impact (VSI) Grade finely washed etc.)

C) Second Floor Providing and laying Cast in situ/Ready Mix cement concrete Mix-25 of trap metal for reinforced cement concrete columns as per detailed designs and drawing or as directed including steel centering,formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand Vertical Shaft Impact (VSI) Grade finely washed etc.)

A) Ground Floor Providing and casting in situ cement concrete in Mix - 25 of trap metal for reinforced cement concrete beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction and roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). withfully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc.complete. With fine aggregate (Natural Sand / Crushed sand Vertical Shaft Impact (VSI) Grade finely washed etc.)

B ) First Floor Providing and casting in situ cement concrete in Mix - 25 of trap metal for reinforced cement concrete beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction and roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). withfully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc.complete. With fine aggregate (Natural Sand / Crushed sand Vertical Shaft Impact (VSI) Grade finely washed etc.)

C) Second Floor Providing and casting in situ cement concrete in Mix - 25 of trap metal for reinforced cement concrete beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction and roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). withfully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc.complete. With fine aggregate (Natural Sand / Crushed sand Vertical Shaft Impact (VSI) Grade finely washed etc.)

Providing fly ash brick masonry for foundation and plinth with conventional / Indian Standard type fly ash brick in cement mortar 1:6 including striking joints, racking out joints watering and scaffolding complete.

Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 centimetre to 20 centimetre including watering and compaction etc. complete.

Filling in plinth and floors with approved excavated material in 15 centimetre .to 20 centimetre . layers including watering and compacting etc. complete.

Providing soling using 80 millimetre size trap metal in 15 centimetre . layer including filling voids with sand / grit ramming , watering complete.

A) Ground Floor Providing and casting in situ cement concrete Mix-25 of trap metal for reinforced cement concrete slabs and landings canopy, waist slab with steps as per detailed designs and drawingsincluding steel centering, formwork,cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc.complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled Concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand/ Crushed sand Vertical Shaft Impact (VSI) Grade finely washed etc.

B ) First Floor Providing and casting in situ cement concrete Mix-25 of trap metal for reinforced cement concrete slabs and landings canopy, waist slab with steps as per detailed designs and drawingsincluding steel centering, formwork,cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc.complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled Concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand/ Crushed sand Vertical Shaft Impact (VSI) Grade finely washed etc.

C) Second Floor Providing and casting in situ cement concrete Mix-25 of trap metal for reinforced cement concrete slabs and landings canopy, waist slab with steps as per detailed designs and drawingsincluding steel centering, formwork,cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc.complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled Concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand/ Crushed sand Vertical Shaft Impact (VSI) Grade finely washed etc.

A) Ground Floor Providing and casting in situ cement concrete Mix-25 of trap metal for reinforced cement concrete Chajja as per detailed design and drawings including steel centering, formwork,cover blocks, laying/pumping, compaction and roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled Concrete Batch mix plant (Pan mixer) etc.complete. With fine aggregate (Natural Sand / Crushed sand Vertical Shaft Impact (VSI) Grade finely washed etc.)

B ) First Floor Providing and casting in situ cement concrete Mix-25 of trap metal for reinforced cement concrete Chajja as per detailed design and drawings including steel centering, formwork,cover blocks, laying/pumping, compaction and roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled Concrete Batch mix plant (Pan mixer) etc.complete. With fine aggregate (Natural Sand / Crushed sand Vertical Shaft Impact (VSI) Grade finely washed etc.)

C) Second Floor Providing and casting in situ cement concrete Mix-25 of trap metal for reinforced cement concrete Chajja as per detailed design and drawings including steel centering, formwork,cover blocks, laying/pumping, compaction and roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled Concrete Batch mix plant (Pan mixer) etc.complete. With fine aggregate (Natural Sand / Crushed sand Vertical Shaft Impact (VSI) Grade finely washed etc.)

A) Ground Floor Providing and casting in situ cement concrete in Mix-25 of trap metal for reinforced cement concrete Pardi required thickness fins including steel centering,formwork,cover blocks,laying/pumping, compaction and roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled Concrete Batch mix plant (Pan mixer) etc.complete. With fine aggregate (Natural Sand / Crushed sand Vertical Shaft Impact (VSI) Grade finely washed etc)

B ) First Floor Providing and casting in situ cement concrete in Mix-25 of trap metal for reinforced cement concrete Pardi required thickness fins including steel centering,formwork,cover blocks,laying/pumping, compaction and roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled Concrete Batch mix plant (Pan mixer) etc.complete. With fine aggregate (Natural Sand / Crushed sand Vertical Shaft Impact (VSI) Grade finely washed etc)

C) Second Floor Providing and casting in situ cement concrete in Mix-25 of trap metal for reinforced cement concrete Pardi required thickness fins including steel centering,formwork,cover blocks,laying/pumping, compaction and roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled Concrete Batch mix plant (Pan mixer) etc.complete. With fine aggregate (Natural Sand / Crushed sand Vertical Shaft Impact (VSI) Grade finely washed etc)

D)Front Elevation C.C.Qty. Providing and casting in situ cement concrete in Mix-25 of trap metal for reinforced cement concrete Pardi required thickness fins including steel centering,formwork,cover blocks,laying/pumping, compaction and roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled Concrete Batch mix plant (Pan mixer) etc.complete. With fine aggregate (Natural Sand / Crushed sand Vertical Shaft Impact (VSI) Grade finely washed etc)

A) Ground Floor Providing and laying Cast in situ/Ready Mix cement concrete in Mix-25 of trap metal for reinforced cement concrete Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand Vertical Shaft Impact (VSI) Grade finely washed etc)

B ) First Floor Providing and laying Cast in situ/Ready Mix cement concrete in Mix-25 of trap metal for reinforced cement concrete Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand Vertical Shaft Impact (VSI) Grade finely washed etc)

C) Second Floor Providing and laying Cast in situ/Ready Mix cement concrete in Mix-25 of trap metal for reinforced cement concrete Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand Vertical Shaft Impact (VSI) Grade finely washed etc)

A) Ground Floor Providing and fixing in position Thermo Mechanically Treated (TMT) - FE-500 reinforcement of various diameters for reinforced cement concrete pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

B ) First Floor Providing and fixing in position Thermo Mechanically Treated (TMT) - FE-500 reinforcement of various diameters for reinforced cement concrete pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

C) Second Floor Providing and fixing in position Thermo Mechanically Treated (TMT) - FE-500 reinforcement of various diameters for reinforced cement concrete pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

A) Ground Floor Providing and constructing masonry in Autoclaved Areaclaved (Celluar) Concrete Block of aproved manufacturer confirming to Indian Standard 2185 Part III 1984 of size ( 625 millimetre x 240 millimetre x 225 millimetre ) in extra fine jointing mortar of fixoblock of Ultra Tech or equivalent in superstucture including,striking joints,racking out joints watering and scaffolding etc.complete

B ) First Floor Providing and constructing masonry in Autoclaved Areaclaved (Celluar) Concrete Block of aproved manufacturer confirming to Indian Standard 2185 Part III 1984 of size ( 625 millimetre x 240 millimetre x 225 millimetre ) in extra fine jointing mortar of fixoblock of Ultra Tech or equivalent in superstucture including,striking joints,racking out joints watering and scaffolding etc.complete

C) Second Floor Providing and constructing masonry in Autoclaved Areaclaved (Celluar) Concrete Block of aproved manufacturer confirming to Indian Standard 2185 Part III 1984 of size ( 625 millimetre x 240 millimetre x 225 millimetre ) in extra fine jointing mortar of fixoblock of Ultra Tech or equivalent in superstucture including,striking joints,racking out joints watering and scaffolding etc.complete

A) Ground Floor Providing and constructing masonry in Autoclaved Areaclaved (Celluar) Concrete Block of aproved manufacturer confirming to Indian Standard 2185 Part III 1984 of size (625 millimetre x 240 millimetre x 100 millimetre ) in extra fine jointing mortar of fixoblock of Ultra Tech or equivalent in half brick thick wall including 2 hoop iron strips 25 millimetre x 1.6 millimetre at every third course,properly bend and bonded at ends scaffolding racking out joints and watering complete .

B ) First Floor Providing and constructing masonry in Autoclaved Areaclaved (Celluar) Concrete Block of aproved manufacturer confirming to Indian Standard 2185 Part III 1984 of size (625 millimetre x 240 millimetre x 100 millimetre ) in extra fine jointing mortar of fixoblock of Ultra Tech or equivalent in half brick thick wall including 2 hoop iron strips 25 millimetre x 1.6 millimetre at every third course,properly bend and bonded at ends scaffolding racking out joints and watering complete .

C) Second Floor Providing and constructing masonry in Autoclaved Areaclaved (Celluar) Concrete Block of aproved manufacturer confirming to Indian Standard 2185 Part III 1984 of size (625 millimetre x 240 millimetre x 100 millimetre ) in extra fine jointing mortar of fixoblock of Ultra Tech or equivalent in half brick thick wall including 2 hoop iron strips 25 millimetre x 1.6 millimetre at every third course,properly bend and bonded at ends scaffolding racking out joints and watering complete .

A) Ground Floor Providing and fixing chicken mesh jali (24 gauge) at the junction of 2 different surfaces of different material component at the time of plastering to prevent cracking in plaster surface as and where directed at all floors with all leads and lifts etc. complete.

B ) First Floor Providing and fixing chicken mesh jali (24 gauge) at the junction of 2 different surfaces of different material component at the time of plastering to prevent cracking in plaster surface as and where directed at all floors with all leads and lifts etc. complete.

C) Second Floor Providing and fixing chicken mesh jali (24 gauge) at the junction of 2 different surfaces of different material component at the time of plastering to prevent cracking in plaster surface as and where directed at all floors with all leads and lifts etc. complete.

C) Second Floor Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in cement mortar 1:5 admixed with approved water proofing compound filling up to half depth of brick bats,curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with cement mortar 1:3 admixed with approved water proofing compound and finally top finishing with average 20 millimetre .thick layers of same mortar added with jute fiber at 1 kilogramme per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300 millimetre x 300 millimetre . making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete.

A) Ground Floor Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid ( 2:1 ) by weight covering 9 to 10 square metre per kilogramme with two coat using approved chemicals for masonry and concrete surface by brush covering7years guarantee on Stamp Papers etc. complete.

B ) First Floor Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid ( 2:1 ) by weight covering 9 to 10 square metre per kilogramme with two coat using approved chemicals for masonry and concrete surface by brush covering7years guarantee on Stamp Papers etc. complete.

C) Second Floor Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid ( 2:1 ) by weight covering 9 to 10 square metre per kilogramme with two coat using approved chemicals for masonry and concrete surface by brush covering7years guarantee on Stamp Papers etc. complete.

A) Ground Floor Providing water proof bedding for flooring of Bath and Water Closet 25 millimetre thick in cement mortar 1:3 including using 1 killogramme of water proof compound per bag of cement including levelling curing etc. complete.

B ) First Floor Providing water proof bedding for flooring of Bath and Water Closet 25 millimetre thick in cement mortar 1:3 including using 1 killogramme of water proof compound per bag of cement including levelling curing etc. complete.

C) Second Floor Providing water proof bedding for flooring of Bath and Water Closet 25 millimetre thick in cement mortar 1:3 including using 1 killogramme of water proof compound per bag of cement including levelling curing etc. complete.

A) Ground Floor Providing water proof bedding for flooring of Bath and Water Closet 25 millimetre thick in cement mortar 1:3 including using 1 killogramme of water proof compound per bag of cement including levelling curing etc. complete.

B ) First Floor Providing water proof bedding for flooring of Bath and Water Closet 25 millimetre thick in cement mortar 1:3 including using 1 killogramme of water proof compound per bag of cement including levelling curing etc. complete.

C) Second Floor Providing water proof bedding for flooring of Bath and Water Closet 25 millimetre thick in cement mortar 1:3 including using 1 killogramme of water proof compound per bag of cement including levelling curing etc. complete.

A) Ground Floor Providing internal cement plaster 20 millimetre thick in a single coats in cement mortar 1:5 with neeru finish to concrete surface in all positions including scaffolding and curing complete.

B ) First Floor Providing internal cement plaster 20 millimetre thick in a single coats in cement mortar 1:5 with neeru finish to concrete surface in all positions including scaffolding and curing complete.

C) Second Floor Providing internal cement plaster 20 millimetre thick in a single coats in cement mortar 1:5 with neeru finish to concrete surface in all positions including scaffolding and curing complete.

A) Ground Floor Providing and applying plaster with plaster of paris in 6 millimetre thickness to previously plaster surface in all position including preparing the surface scaffolding etc. complete.

B ) First Floor Providing and applying plaster with plaster of paris in 6 millimetre thickness to previously plaster surface in all position including preparing the surface scaffolding etc. complete.

C) Second Floor Providing and applying plaster with plaster of paris in 6 millimetre thickness to previously plaster surface in all position including preparing the surface scaffolding etc. complete.

A) Ground Floor Providing internal cement plaster 12 millimetre thick in a single coats in cement mortar 1:4 with neeru finish to concrete surface in all positions including scaffolding and curing complete.

B ) First Floor Providing internal cement plaster 12 millimetre thick in a single coats in cement mortar 1:4 with neeru finish to concrete surface in all positions including scaffolding and curing complete.

C) Second Floor Providing internal cement plaster 12 millimetre thick in a single coats in cement mortar 1:4 with neeru finish to concrete surface in all positions including scaffolding and curing complete.

A) Ground Floor Providing and applying impression 24 carrat Luxury paint of approved make and approved brand Emulsion paint to interior walls and ceilings of approved quality, colour and shade to new surface in two coats, including sub surface prparation by Acrylic putty and Acrylic primer coats including scaffolding, preparing the surface. etc. complete (Low VOC).

B ) First Floor Providing and applying impression 24 carrat Luxury paint of approved make and approved brand Emulsion paint to interior walls and ceilings of approved quality, colour and shade to new surface in two coats, including sub surface prparation by Acrylic putty and Acrylic primer coats including scaffolding, preparing the surface. etc. complete (Low VOC).

C) Second Floor Providing and applying impression 24 carrat Luxury paint of approved make and approved brand Emulsion paint to interior walls and ceilings of approved quality, colour and shade to new surface in two coats, including sub surface prparation by Acrylic putty and Acrylic primer coats including scaffolding, preparing the surface. etc. complete (Low VOC).

A) Ground Floor Providing and applying washable oil bound distemper of approved colour and shade to old and new surfaces in two coats including scffolding, preparing the surface (Including the primer coat.)

B ) First Floor Providing and applying washable oil bound distemper of approved colour and shade to old and new surfaces in two coats including scffolding, preparing the surface (Including the primer coat.)

C) Second Floor Providing and applying washable oil bound distemper of approved colour and shade to old and new surfaces in two coats including scffolding, preparing the surface (Including the primer coat.)

A) Ground Floor Providing and applying antipeel paint of approved make and approved brand exterior Emulsion paint of approved quality, colour and shade to old and new surface in two coats, including exterior acrylic primer coat, scaffolding, preparing the surface etc. complete (Heat Reflective Paint).

B ) First Floor Providing and applying antipeel paint of approved make and approved brand exterior Emulsion paint of approved quality, colour and shade to old and new surface in two coats, including exterior acrylic primer coat, scaffolding, preparing the surface etc. complete (Heat Reflective Paint).

C) Second Floor Providing and applying antipeel paint of approved make and approved brand exterior Emulsion paint of approved quality, colour and shade to old and new surface in two coats, including exterior acrylic primer coat, scaffolding, preparing the surface etc. complete (Heat Reflective Paint).

C) Second Floor Providing and applying top coat exterior paint to terrace of approved make, shade and quality and one coat of primer before applying textured paint including scaffolding if necessary preparing surface by throughly cleaning of oil, grease, dirt and other material and fine aggregate (natural sand/crushed sand Vertical Shaft Impact (VSI) grade finely washed etc.) preparing as required, etc. complete.

A) Ground Floor Providing and laying machine cut machine polished Granite Stone Flooring 25 millimetre to 30 millimetre thick in required width in Plain/diamond pattern on a bed of 1:6 Cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning complete.

B ) First Floor Providing and laying machine cut machine polished Granite Stone Flooring 25 millimetre to 30 millimetre thick in required width in Plain/diamond pattern on a bed of 1:6 Cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning complete.

C) Second Floor Providing and laying machine cut machine polished Granite Stone Flooring 25 millimetre to 30 millimetre thick in required width in Plain/diamond pattern on a bed of 1:6 Cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning complete.

A) Ground Floor Providing leather finished polishing to Granite Stone slab by continous grinding in 4 coats of different bits to receive rough and matty finish including buffing process before laying and fixing of stone as per drawing and design, including cleaning, washing and finishing etc. complete.

B ) First Floor Providing leather finished polishing to Granite Stone slab by continous grinding in 4 coats of different bits to receive rough and matty finish including buffing process before laying and fixing of stone as per drawing and design, including cleaning, washing and finishing etc. complete.

C) Second Floor Providing leather finished polishing to Granite Stone slab by continous grinding in 4 coats of different bits to receive rough and matty finish including buffing process before laying and fixing of stone as per drawing and design, including cleaning, washing and finishing etc. complete.

A) Ground Floor Providing and laying polished hand cut Kotah Stone flooring 25 millimetre to 30 millimetre thick and 45 centimetre to 55 centimetre wide in plain/diamond pattern on a bed of 1:6 cement mortar including cement float, filling joints with

B ) First Floor Providing and laying polished hand cut Kotah Stone flooring 25 millimetre to 30 millimetre thick and 45 centimetre to 55 centimetre wide in plain/diamond pattern on a bed of 1:6 cement mortar including cement float, filling joints with

C) Second Floor Providing and laying polished hand cut Kotah Stone flooring 25 millimetre to 30 millimetre thick and 45 centimetre to 55 centimetre wide in plain/diamond pattern on a bed of 1:6 cement mortar including cement float, filling joints with

A) Ground Floor Providing and laying Antiskid Ceramic tiles of approved quality of company Kajaria / Nitco / Asian or equivalent make of size 30 centimetre x 30 centimetre and confirming to IS 15,622-2,006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing complete.

B ) First Floor Providing and laying Antiskid Ceramic tiles of approved quality of company Kajaria / Nitco / Asian or equivalent make of size 30 centimetre x 30 centimetre and confirming to IS 15,622-2,006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing complete.

C) Second Floor Providing and laying Antiskid Ceramic tiles of approved quality of company Kajaria / Nitco / Asian or equivalent make of size 30 centimetre x 30 centimetre and confirming to IS 15,622-2,006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing complete.

A) Ground Floor Providing patti on plastered surface 12 millimetre to 15 millimetre thick in cement mortar 1:3 line and level including neet finishing scaffolding curing etc. complete.

B ) First Floor Providing patti on plastered surface 12 millimetre to 15 millimetre thick in cement mortar 1:3 line and level including neet finishing scaffolding curing etc. complete.

C) Second Floor Providing patti on plastered surface 12 millimetre to 15 millimetre thick in cement mortar 1:3 line and level including neet finishing scaffolding curing etc. complete.

A) Ground Floor Labour charges for providing groove in external plaster having width of 2.5 cement mortar and spaced at a distance of 45 cement mortar etc. complete.

B ) First Floor Labour charges for providing groove in external plaster having width of 2.5 cement mortar and spaced at a distance of 45 cement mortar etc. complete.

C) Second Floor Labour charges for providing groove in external plaster having width of 2.5 cement mortar and spaced at a distance of 45 cement mortar etc. complete.

A) Ground Floor Providing and fixing machine cut machine polished 18 millimetre to 20 millimetre thick telephone black /Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete.

B ) First Floor Providing and fixing machine cut machine polished 18 millimetre to 20 millimetre thick telephone black /Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete.

C) Second Floor Providing and fixing machine cut machine polished 18 millimetre to 20 millimetre thick telephone black /Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete.

A) Ground Floor Providing and laying ceramic tiles of Kajaria/ Nitco/ Asian or equivalent make having sizes 30 centimetre x 45 centimetre for dado and skirting in required position with ready made adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white / colour cement slurry cleaning curing complete.

B ) First Floor Providing and laying ceramic tiles of Kajaria/ Nitco/ Asian or equivalent make having sizes 30 centimetre x 45 centimetre for dado and skirting in required position with ready made adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white / colour cement slurry cleaning curing complete.

C) Second Floor Providing and laying ceramic tiles of Kajaria/ Nitco/ Asian or equivalent make having sizes 30 centimetre x 45 centimetre for dado and skirting in required position with ready made adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white / colour cement slurry cleaning curing complete.

A) Ground Floor Providing and laying vitrified matt finish tiles of kajaria/Nitco/ Asian/Coral or equivalent make having size 595 millimetre 595 millimetre of 10 to 12 millimetre thickness confirming to Indian Standard 15622-2006 (Group Bla) of approved make,shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float,filling joints, curing and cleaning etc. complete Note: (Water absorption should not be more than 0.05 Percent ).

B ) First Floor Providing and laying vitrified matt finish tiles of kajaria/Nitco/ Asian/Coral or equivalent make having size 595 millimetre 595 millimetre of 10 to 12 millimetre thickness confirming to Indian Standard 15622-2006 (Group Bla) of approved make,shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float,filling joints, curing and cleaning etc. complete Note: (Water absorption should not be more than 0.05 Percent ).

C) Second Floor Providing and laying vitrified matt finish tiles of kajaria/Nitco/ Asian/Coral or equivalent make having size 595 millimetre 595 millimetre of 10 to 12 millimetre thickness confirming to Indian Standard 15622-2006 (Group Bla) of approved make,shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float,filling joints, curing and cleaning etc. complete Note: (Water absorption should not be more than 0.05 Percent ).

A) Ground Floor Providing and fixing in required position skirting or dado of polished Kotah Stone slab 25 millimetre to 30 millimetre thick fixed on base on plaster of cement mortar 1:4 including cement float, filling joints with cement slurry, curing rubbing, polishing and cleaning complete.

B ) First Floor Providing and fixing in required position skirting or dado of polished Kotah Stone slab 25 millimetre to 30 millimetre thick fixed on base on plaster of cement mortar 1:4 including cement float, filling joints with cement slurry, curing rubbing, polishing and cleaning complete.

C) Second Floor Providing and fixing in required position skirting or dado of polished Kotah Stone slab 25 millimetre to 30 millimetre thick fixed on base on plaster of cement mortar 1:4 including cement float, filling joints with cement slurry, curing rubbing, polishing and cleaning complete.

A) Ground Floor Providing and laying vitrified matt fininsh tiles of Kajaria/ Nitco/ Asian or equivalent make having size 590 millimetre to 605 millimetre x to 605 millimetre of 8 to 10 millimetre thickness and confirming Indian Standard 15622-2006 (Group Bla) of approved make, shade and pattern for Skirting in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete.b) Skirting

B ) First Floor Providing and laying vitrified matt fininsh tiles of Kajaria/ Nitco/ Asian or equivalent make having size 590 millimetre to 605 millimetre x to 605 millimetre of 8 to 10 millimetre thickness and confirming Indian Standard 15622-2006 (Group Bla) of approved make, shade and pattern for Skirting in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete.b) Skirting

C) Second Floor Providing and laying vitrified matt fininsh tiles of Kajaria/ Nitco/ Asian or equivalent make having size 590 millimetre to 605 millimetre x to 605 millimetre of 8 to 10 millimetre thickness and confirming Indian Standard 15622-2006 (Group Bla) of approved make, shade and pattern for Skirting in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete.b) Skirting

A) Ground Floor Providing and fixing mild steel grill work for windows, ventilators etc. 20 kilogramme per square metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete.

B ) First Floor Providing and fixing mild steel grill work for windows, ventilators etc. 20 kilogramme per square metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete.

C) Second Floor Providing and fixing mild steel grill work for windows, ventilators etc. 20 kilogramme per square metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete.

A) Ground Floor Providing and fixing fiber glass reinforced polyster door shutter 30 millimetre thick as per Indian Standard 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc. complete

B ) First Floor Providing and fixing fiber glass reinforced polyster door shutter 30 millimetre thick as per Indian Standard 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc. complete

C) Second Floor Providing and fixing fiber glass reinforced polyster door shutter 30 millimetre thick as per Indian Standard 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc. complete

A) Ground Floor Providing and fixing Country cut teak wood double or single leaf panelled shutters, 35 millimetre thick style top and freze rail 95 x 35 thick with lock and bottam rail 195 x 25 millimetre thick and panels without ventilator as per detailed drawing excluding the door frame,stainless steel fixtures and fastening and finishing the wood work with oil painting 3 coats complete

B ) First Floor Providing and fixing Country cut teak wood double or single leaf panelled shutters, 35 millimetre thick style top and freze rail 95 x 35 thick with lock and bottam rail 195 x 25 millimetre thick and panels without ventilator as per detailed drawing excluding the door frame,stainless steel fixtures and fastening and finishing the wood work with oil painting 3 coats complete

C) Second Floor Providing and fixing Country cut teak wood double or single leaf panelled shutters, 35 millimetre thick style top and freze rail 95 x 35 thick with lock and bottam rail 195 x 25 millimetre thick and panels without ventilator as per detailed drawing excluding the door frame,stainless steel fixtures and fastening and finishing the wood work with oil painting 3 coats complete

A) Ground Floor Providing and fixing solid core flush door shutter in double leaf 32 millimetre thick decorative type of exterior grade as per detailed drawings approved face veneers 3 millimetre thick on both faces or as directed,all necessary beads, mouldings and lipping, wrought iron hold fasts,chromium plated fixtures and fastenings, with brass mortise lock,chromium plated handles on both sides, and finishing with French Polish etc. complete.

B ) First Floor Providing and fixing solid core flush door shutter in double leaf 32 millimetre thick decorative type of exterior grade as per detailed drawings approved face veneers 3 millimetre thick on both faces or as directed,all necessary beads, mouldings and lipping, wrought iron hold fasts,chromium plated fixtures and fastenings, with brass mortise lock,chromium plated handles on both sides, and finishing with French Polish etc. complete.

C) Second Floor Providing and fixing solid core flush door shutter in double leaf 32 millimetre thick decorative type of exterior grade as per detailed drawings approved face veneers 3 millimetre thick on both faces or as directed,all necessary beads, mouldings and lipping, wrought iron hold fasts,chromium plated fixtures and fastenings, with brass mortise lock,chromium plated handles on both sides, and finishing with French Polish etc. complete.

A) Ground Floor Providing and fixing in position (as per Indian Standard 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 millimetre at weight 0.637 kilogramme per running metre with window frame bottom track section 92 x 31.75 x 1.30 millimetre at weight 1.070 kilogramme per running metre . Top and side track section 92 x 31.75 x 1.30 millimetre at weight 0.933 kilogramme per running metre The shutter should be of bearing bottom 40 x 18 x 1.25 millimetre at weight 0.417 kilogramme per running metre Inter locking section 40 x 18 x 1.10 millimetre at weight 0.469 kilogramme per running metre and handle and top section 40 x 18 x 1.25 millimetre at weight o.417 kilogramme per running metre As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 millimetre thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With powder coating without box

B ) First Floor Providing and fixing in position (as per Indian Standard 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 millimetre at weight 0.637 kilogramme per running metre with window frame bottom track section 92 x 31.75 x 1.30 millimetre at weight 1.070 kilogramme per running metre . Top and side track section 92 x 31.75 x 1.30 millimetre at weight 0.933 kilogramme per running metre The shutter should be of bearing bottom 40 x 18 x 1.25 millimetre at weight 0.417 kilogramme per running metre Inter locking section 40 x 18 x 1.10 millimetre at weight 0.469 kilogramme per running metre and handle and top section 40 x 18 x 1.25 millimetre at weight o.417 kilogramme per running metre As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 millimetre thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With powder coating without box

C) Second Floor Providing and fixing in position (as per Indian Standard 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 millimetre at weight 0.637 kilogramme per running metre with window frame bottom track section 92 x 31.75 x 1.30 millimetre at weight 1.070 kilogramme per running metre . Top and side track section 92 x 31.75 x 1.30 millimetre at weight 0.933 kilogramme per running metre The shutter should be of bearing bottom 40 x 18 x 1.25 millimetre at weight 0.417 kilogramme per running metre Inter locking section 40 x 18 x 1.10 millimetre at weight 0.469 kilogramme per running metre and handle and top section 40 x 18 x 1.25 millimetre at weight o.417 kilogramme per running metre As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 millimetre thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With powder coating without box

A) Ground Floor Providing and fixing in position. (as per Indian Standard 1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 millimetre at weight 0.547 kilogramme per running metre and window frame bottom track section 61.85 x 31.75 x 1.20 millimetre at weight 0.695 kilogramme per running metre Top and side track section 61.85 x 31.75 x 1.30 millimetre at weight 0.659 kilogramme per running metre The shutter should be of bearing bottom 40 x 18 x 1.25 millimetre at weight 0.417 kilogramme per running metre Inter locking section 40 x 18 x 1.10 millimetre at weight 0.469 kilogramme per running metre And handle section 40 x 18 x 1.25 millimetre at weight 0.417 kilogramme per running metre and top section 40 x 18 x 1.25 millimetre at weight 0.417 kilogramme per running metre As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 millimetre thick plain glass with all required screws and nuts etc, complete. With powder coating without box

B ) First Floor Providing and fixing in position. (as per Indian Standard 1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 millimetre at weight 0.547 kilogramme per running metre and window frame bottom track section 61.85 x 31.75 x 1.20 millimetre at weight 0.695 kilogramme per running metre Top and side track section 61.85 x 31.75 x 1.30 millimetre at weight 0.659 kilogramme per running metre The shutter should be of bearing bottom 40 x 18 x 1.25 millimetre at weight 0.417 kilogramme per running metre Inter locking section 40 x 18 x 1.10 millimetre at weight 0.469 kilogramme per running metre And handle section 40 x 18 x 1.25 millimetre at weight 0.417 kilogramme per running metre and top section 40 x 18 x 1.25 millimetre at weight 0.417 kilogramme per running metre As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 millimetre thick plain glass with all required screws and nuts etc, complete. With powder coating without box

C ) Second Floor Providing and fixing in position. (as per Indian Standard 1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 millimetre at weight 0.547 kilogramme per running metre and window frame bottom track section 61.85 x 31.75 x 1.20 millimetre at weight 0.695 kilogramme per running metre Top and side track section 61.85 x 31.75 x 1.30 millimetre at weight 0.659 kilogramme per running metre The shutter should be of bearing bottom 40 x 18 x 1.25 millimetre at weight 0.417 kilogramme per running metre Inter locking section 40 x 18 x 1.10 millimetre at weight 0.469 kilogramme per running metre And handle section 40 x 18 x 1.25 millimetre at weight 0.417 kilogramme per running metre and top section 40 x 18 x 1.25 millimetre at weight 0.417 kilogramme per running metre As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 millimetre thick plain glass with all required screws and nuts etc, complete. With powder coating without box

A) Ground Floor Providing and fixing in position aluminium partly openable and partly fixed window of any size as per detailed drawing and as directed by Engineerincharge with all necessary alluminium sections including necessary fixtures and fastening with 5 millimetre thick float glass etc. complete. b) With powder coating Note While arriving at the rate of item of item weight at 6.90 kilogramme per square metre is considered.

B ) First Floor Providing and fixing in position aluminium partly openable and partly fixed window of any size as per detailed drawing and as directed by Engineerincharge with all necessary alluminium sections including necessary fixtures and fastening with 5 millimetre thick float glass etc. complete. b) With powder coating Note While arriving at the rate of item of item weight at 6.90 kilogramme per square metre is considered.

C ) Second Floor Providing and fixing in position aluminium partly openable and partly fixed window of any size as per detailed drawing and as directed by Engineerincharge with all necessary alluminium sections including necessary fixtures and fastening with 5 millimetre thick float glass etc. complete. b) With powder coating Note While arriving at the rate of item of item weight at 6.90 kilogramme per square metre is considered.

A) Ground Floor Providing and fixing in position anodised (as per Indian Standard 1868/1982) Aluminium fixed staggered ( Z Type) Ventilator with aluminium rectangular pipe 63 millimetre x 38.10 millimetre x 1.22 millimetre at weight 0.650 Kg/Rmt, Aluminium angle of size 15 millimetre x15 millimetre x1 millimetre ,aluminium channel of 9 millimetre sizes, stainless steel mosquito net of 304 Grade,4 millimetre thick float glass per detailed drawing and as directed by Engineer in charge

B ) First Floor Providing and fixing in position anodised (as per Indian Standard 1868/1982) Aluminium fixed staggered ( Z Type) Ventilator with aluminium rectangular pipe 63 millimetre x 38.10 millimetre x 1.22 millimetre at weight 0.650 Kg/Rmt, Aluminium angle of size 15 millimetre x15 millimetre x1 millimetre ,aluminium channel of 9 millimetre sizes, stainless steel mosquito net of 304 Grade,4 millimetre thick float glass per detailed drawing and as directed by Engineer in charge

C ) Second Floor Providing and fixing in position anodised (as per Indian Standard 1868/1982) Aluminium fixed staggered ( Z Type) Ventilator with aluminium rectangular pipe 63 millimetre x 38.10 millimetre x 1.22 millimetre at weight 0.650 Kg/Rmt, Aluminium angle of size 15 millimetre x15 millimetre x1 millimetre ,aluminium channel of 9 millimetre sizes, stainless steel mosquito net of 304 Grade,4 millimetre thick float glass per detailed drawing and as directed by Engineer in charge

B ) First Floor Providing and fixing in position power coated aluminium fixed window fully glazed of any size as per detailed drawing and as directed by Engineerincharge with all necessary alluminium sections including necessary fixtures and fastening such as 5 millimetre thick clear float glass etc. complete. Note While arriving at the rate of item of item weight at 6.90 kilogramme per square is considered.

C ) Second Floor Providing and fixing in position power coated aluminium fixed window fully glazed of any size as per detailed drawing and as directed by Engineerincharge with all necessary alluminium sections including necessary fixtures and fastening such as 5 millimetre thick clear float glass etc. complete. Note While arriving at the rate of item of item weight at 6.90 kilogramme per square is considered.

A) Ground Floor Providing and fixing frame with / without ventilator of size as specified with Cou ntry cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300 millimetre x 40 millimetre x 5 millimetre with oil painting, etc. complete.

B ) First Floor Providing and fixing frame with / without ventilator of size as specified with Cou ntry cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300 millimetre x 40 millimetre x 5 millimetre with oil painting, etc. complete.

C ) Second Floor Providing and fixing frame with / without ventilator of size as specified with Cou ntry cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300 millimetre x 40 millimetre x 5 millimetre with oil painting, etc. complete.

A) Ground Floor Providing and fixing false ceiling with eco-friendly light-weight calcium silicate tiles of spintone surface texture aerolite make or equivalent of size 595 millimetre x 595 millimetre having 15 millimetre thick densified micro look edge and 100 Percent humidity resistance placed in true horizontal level suspended grid of size 600x600 millimetre made from hot dipped galvanised iron steel sections ion silhouette profile, rotary stitched double webbed white with 6 millimetre reveal profile (white/black), wherein, main T runner of size 42 millimetre x14 millimetre between main tee 600 millimetre centertocenter and secondary cross T of size 33x14x0.43 millimetre thick of length 600 millimetre long spaced inter-locked at middle of the first crossed T in each panel to form grid of 1200 millimetre x600 millimetre resting on periphery wall Profile wall section 19 millimetre (7+7) x 19 millimetre x0.40thicknesses and laying false ceiling for services like diffusers grills including cutting, making opening for light fittings, fixtures,smoke detectors etc. wherever required. Main T runners suspended from ceiling with using galvanised ironsoffit cleats of size 25x35x1.6 millimetre of required length fixed to the ceiling with 6 millimetre dia and 50 millimetre long dash fastener, 4 millimetre dia galvanised iron adjustable rods with powder-coated/good quality galvanised iron level adjustment clips of 35x35x0.8 millimetre spaced @1200, center-to-center along mainT all complete at all heights as per the specifications,drawings and as per the directions of Engineer Incharge.

B ) First Floor Providing and fixing false ceiling with eco-friendly light-weight calcium silicate tiles of spintone surface texture aerolite make or equivalent of size 595 millimetre x 595 millimetre having 15 millimetre thick densified micro look edge and 100 Percent humidity resistance placed in true horizontal level suspended grid of size 600x600 millimetre made from hot dipped galvanised iron steel sections ion silhouette profile, rotary stitched double webbed white with 6 millimetre reveal profile (white/black), wherein, main T runner of size 42 millimetre x14 millimetre between main tee 600 millimetre centertocenter and secondary cross T of size 33x14x0.43 millimetre thick of length 600 millimetre long spaced inter-locked at middle of the first crossed T in each panel to form grid of 1200 millimetre x600 millimetre resting on periphery wall Profile wall section 19 millimetre (7+7) x 19 millimetre x0.40thicknesses and laying false ceiling for services like diffusers grills including cutting, making opening for light fittings, fixtures,smoke detectors etc. wherever required. Main T runners suspended from ceiling with using galvanised ironsoffit cleats of size 25x35x1.6 millimetre of required length fixed to the ceiling with 6 millimetre dia and 50 millimetre long dash fastener, 4 millimetre dia galvanised iron adjustable rods with powder-coated/good quality galvanised iron level adjustment clips of 35x35x0.8 millimetre spaced @1200, center-to-center along mainT all complete at all heights as per the specifications,drawings and as per the directions of Engineer Incharge.

C ) Second Floor Providing and fixing false ceiling with eco-friendly light-weight calcium silicate tiles of spintone surface texture aerolite make or equivalent of size 595 millimetre x 595 millimetre having 15 millimetre thick densified micro look edge and 100 Percent humidity resistance placed in true horizontal level suspended grid of size 600x600 millimetre made from hot dipped galvanised iron steel sections ion silhouette profile, rotary stitched double webbed white with 6 millimetre reveal profile (white/black), wherein, main T runner of size 42 millimetre x14 millimetre between main tee 600 millimetre centertocenter and secondary cross T of size 33x14x0.43 millimetre thick of length 600 millimetre long spaced inter-locked at middle of the first crossed T in each panel to form grid of 1200 millimetre x600 millimetre resting on periphery wall Profile wall section 19 millimetre (7+7) x 19 millimetre x0.40thicknesses and laying false ceiling for services like diffusers grills including cutting, making opening for light fittings, fixtures,smoke detectors etc. wherever required. Main T runners suspended from ceiling with using galvanised ironsoffit cleats of size 25x35x1.6 millimetre of required length fixed to the ceiling with 6 millimetre dia and 50 millimetre long dash fastener, 4 millimetre dia galvanised iron adjustable rods with powder-coated/good quality galvanised iron level adjustment clips of 35x35x0.8 millimetre spaced @1200, center-to-center along mainT all complete at all heights as per the specifications,drawings and as per the directions of Engineer Incharge.

A) Ground Floor Providing and fixing factory-made steel door of Single leaf External Plain Wood finish type witha.) frame of size 100 x 58 millimetre conforming to Indian Standard :4351-2003,1.2 millimetre thick pre galvanized sheet with mitred and welded cones,frame stretches,hinge reinforcing plates,fixing plates and hardware mounting plates and Poly urethane foam in fill b.)Shutter of thickness 46 millimetre made of 0.8 millimetre thick slip coated pre galvanized steel sheet on both sides conforming to ASTMA 527/ASTMA 525,BS 2989 1994,Indian Standard 277, Zinc coating 120 GS M.Lock formed panels with internal stiffeners of 3 millimetre thick made of galvanized sheet,3 millimetre thick hinge reinforcing hard ware mounting plates and lock protection with Honey-comb craft paper infill of thickness 150 GSM of load bearing capacity 500 kilogramme per Square Metre.c.)Finish:Powder coated surface finished with thermo setting poly urethane paint of Aliphatic grade of thickness 60-micron d.)Accessories: Min 8 Anchor fastener of HILTI make,min 3 SS Ball Bearing Butt Hinges of Dorset make,Dorset Mortise lock,stainless steel Tower bolt of 200 millimetre size, Eye hole, Door stopper complete. Sizes up to 1200 x2439 millimetre

B ) First Floor Providing and fixing factory-made steel door of Single leaf External Plain Wood finish type witha.) frame of size 100 x 58 millimetre conforming to Indian Standard :4351-2003,1.2 millimetre thick pre galvanized sheet with mitred and welded cones,frame stretches,hinge reinforcing plates,fixing plates and hardware mounting plates and Poly urethane foam in fill b.)Shutter of thickness 46 millimetre made of 0.8 millimetre thick slip coated pre galvanized steel sheet on both sides conforming to ASTMA 527/ASTMA 525,BS 2989 1994,Indian Standard 277, Zinc coating 120 GS M.Lock formed panels with internal stiffeners of 3 millimetre thick made of galvanized sheet,3 millimetre thick hinge reinforcing hard ware mounting plates and lock protection with Honey-comb craft paper infill of thickness 150 GSM of load bearing capacity 500 kilogramme per Square Metre.c.)Finish:Powder coated surface finished with thermo setting poly urethane paint of Aliphatic grade of thickness 60-micron d.)Accessories: Min 8 Anchor fastener of HILTI make,min 3 SS Ball Bearing Butt Hinges of Dorset make,Dorset Mortise lock,stainless steel Tower bolt of 200 millimetre size, Eye hole, Door stopper complete. Sizes up to 1200 x2439 millimetre

C ) Second Floor Providing and fixing factory-made steel door of Single leaf External Plain Wood finish type witha.) frame of size 100 x 58 millimetre conforming to Indian Standard :4351-2003,1.2 millimetre thick pre galvanized sheet with mitred and welded cones,frame stretches,hinge reinforcing plates,fixing plates and hardware mounting plates and Poly urethane foam in fill b.)Shutter of thickness 46 millimetre made of 0.8 millimetre thick slip coated pre galvanized steel sheet on both sides conforming to ASTMA 527/ASTMA 525,BS 2989 1994,Indian Standard 277, Zinc coating 120 GS M.Lock formed panels with internal stiffeners of 3 millimetre thick made of galvanized sheet,3 millimetre thick hinge reinforcing hard ware mounting plates and lock protection with Honey-comb craft paper infill of thickness 150 GSM of load bearing capacity 500 kilogramme per Square Metre.c.)Finish:Powder coated surface finished with thermo setting poly urethane paint of Aliphatic grade of thickness 60-micron d.)Accessories: Min 8 Anchor fastener of HILTI make,min 3 SS Ball Bearing Butt Hinges of Dorset make,Dorset Mortise lock,stainless steel Tower bolt of 200 millimetre size, Eye hole, Door stopper complete. Sizes up to 1200 x2439 millimetre

A) Ground Floor Providing and fixing during laying in reinforced cement concrete Slab rectangular 2 millimetre thick mild steel sheet fan hook box of size 180 millimetre x 100 millimetre with required depth with holes or notches as required, bottom and top sides of 1.6 millimetre mild steel sheet fixed with 3.5 millimetre diameter round headed screws together with 12 millimetre diameter mild steel bar bent to shape with hooked ends for fan hook and painting to exposed surface.

B ) First Floor Providing and fixing during laying in reinforced cement concrete Slab rectangular 2 millimetre thick mild steel sheet fan hook box of size 180 millimetre x 100 millimetre with required depth with holes or notches as required, bottom and top sides of 1.6 millimetre mild steel sheet fixed with 3.5 millimetre diameter round headed screws together with 12 millimetre diameter mild steel bar bent to shape with hooked ends for fan hook and painting to exposed surface.

C ) Second Floor Providing and fixing during laying in reinforced cement concrete Slab rectangular 2 millimetre thick mild steel sheet fan hook box of size 180 millimetre x 100 millimetre with required depth with holes or notches as required, bottom and top sides of 1.6 millimetre mild steel sheet fixed with 3.5 millimetre diameter round headed screws together with 12 millimetre diameter mild steel bar bent to shape with hooked ends for fan hook and painting to exposed surface.

A) Ground Floor Providing and fixing granite stone of 18 to 20 millimetre thick for door frame/ dado/ window boxing etc. On cement mortar 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etc. complete.

B ) First Floor Providing and fixing granite stone of 18 to 20 millimetre thick for door frame/ dado/ window boxing etc. On cement mortar 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etc. complete.

C ) Second Floor Providing and fixing granite stone of 18 to 20 millimetre thick for door frame/ dado/ window boxing etc. On cement mortar 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etc. complete.

A) Ground Floor Providing and fixing 40 millimetre diameter and 1.5 millimetre thick Stainless steel hand railing in stainless steel 304 Grade including fabricating ,fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe etc. complete

B ) First Floor Providing and fixing 40 millimetre diameter and 1.5 millimetre thick Stainless steel hand railing in stainless steel 304 Grade including fabricating ,fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe etc. complete

C ) Second Floor Providing and fixing 40 millimetre diameter and 1.5 millimetre thick Stainless steel hand railing in stainless steel 304 Grade including fabricating ,fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe etc. complete

A) Ground Floor Providing and fixing 900 millimetre high stainless steel 304 Grade Stainless steel railing with 40 millimetre diameter and 1.5 millimetre thick at top,40 millimetre diameter and 1.5 millimetre thick vertical supports spaced at 1.5 metre center to center and 8 millimetre thick toughened glass including fabricating ,fixtures, errecting , necessary welding , grinding , finishing, buffing to stainless steel pipe etc. complete

B ) First Floor Providing and fixing 900 millimetre high stainless steel 304 Grade Stainless steel railing with 40 millimetre diameter and 1.5 millimetre thick at top,40 millimetre diameter and 1.5 millimetre thick vertical supports spaced at 1.5 metre center to center and 8 millimetre thick toughened glass including fabricating ,fixtures, errecting , necessary welding , grinding , finishing, buffing to stainless steel pipe etc. complete

C ) Second Floor Providing and fixing 900 millimetre high stainless steel 304 Grade Stainless steel railing with 40 millimetre diameter and 1.5 millimetre thick at top,40 millimetre diameter and 1.5 millimetre thick vertical supports spaced at 1.5 metre center to center and 8 millimetre thick toughened glass including fabricating ,fixtures, errecting , necessary welding , grinding , finishing, buffing to stainless steel pipe etc. complete

A) Ground Floor Providing and fixing stainless steel sink of size 600 x 510 x 200 millimetre of Nirali or equivalent make incluidng coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete.

A) Ground Floor Providing and fixing black kadappa stone shelves 25 millimetre . thick machine polished, extending the polish upto 20 centimetre width on lowerside, rounding corners, laying in position jointing with bedding cement mortar 1:4 proportion curing etc complete.

A) Ground Floor Providing and preparing Kitchen otta made up from 30 millimetre thick and 75 centimetre . wide one side Kaddapa stone top 75 centimetre high vertical support for kadappa at 1 metre centre to centre of 25 millimetre thick both side polished kadappa middle shelf and bottom of 20 millimetre thick one side polished kadappa with facia patti of 20 x 50 millimetre kadappa including all material labour cutting fixing with cement mortar and araldite curing polished and cleaning etc. complete.

A) Ground Floor Providing and fixing machine cut mirror polished 18 millimetre to 20 millimetre thick telephone black granite / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with rounding / moulding the edges etc. complete . Both side polish

B ) First Floor Providing and fixing machine cut mirror polished 18 millimetre to 20 millimetre thick telephone black granite / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with rounding / moulding the edges etc. complete . Both side polish

C ) Second Floor Providing and fixing machine cut mirror polished 18 millimetre to 20 millimetre thick telephone black granite / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with rounding / moulding the edges etc. complete . Both side polish

A) Ground Floor Providing and fixing orissa type colour glazed earthenware 625 x 450 millimetre water closet pan including trap, cast iron soil and vent pipe upto the out side face of wall including 100 millimetre . diameter cast iron plug, bend, 15 millimetre . thick 10 litre poly vinyl chloride flushing cistern with all necessary pipe connection etc.complete.

B ) First Floor Providing and fixing orissa type colour glazed earthenware 625 x 450 millimetre water closet pan including trap, cast iron soil and vent pipe upto the out side face of wall including 100 millimetre . diameter cast iron plug, bend, 15 millimetre . thick 10 litre poly vinyl chloride flushing cistern with all necessary pipe connection etc.complete.

C ) Second Floor Providing and fixing orissa type colour glazed earthenware 625 x 450 millimetre water closet pan including trap, cast iron soil and vent pipe upto the out side face of wall including 100 millimetre . diameter cast iron plug, bend, 15 millimetre . thick 10 litre poly vinyl chloride flushing cistern with all necessary pipe connection etc.complete.

A) Ground Floor Providing and fixing oval type under counter wash hand basin of 16 inch x 22 inch size and of special colour shade having telephonic black/ coloured granite of 180 millimetre thick stone black kadappa framework including chromium plated coupling bottle - Trap using CERA company or equivalent oval typa wash basin model no 3448 as per detailed drawing or as directed by engg incharge etc complete. (Counter size 1.20 metre x 0.60 metre )

B ) First Floor Providing and fixing oval type under counter wash hand basin of 16 inch x 22 inch size and of special colour shade having telephonic black/ coloured granite of 180 millimetre thick stone black kadappa framework including chromium plated coupling bottle - Trap using CERA company or equivalent oval typa wash basin model no 3448 as per detailed drawing or as directed by engg incharge etc complete. (Counter size 1.20 metre x 0.60 metre )

C ) Second Floor Providing and fixing oval type under counter wash hand basin of 16 inch x 22 inch size and of special colour shade having telephonic black/ coloured granite of 180 millimetre thick stone black kadappa framework including chromium plated coupling bottle - Trap using CERA company or equivalent oval typa wash basin model no 3448 as per detailed drawing or as directed by engg incharge etc complete. (Counter size 1.20 metre x 0.60 metre )

A) Ground Floor Providing and fixing white glazed earthenware Wash Hand Basin of 55 centimetre x 40 centimetre .size including cold water pillar tap/cold and hot water pillar tap brackets,rubber plugs and brass chain,stop tap and necessary pipe connections including poly vinyl chloride waste pipe and trap up to the outside face of the wall. Making good the damaged surface,testing etc. complete.

B ) First Floor Providing and fixing white glazed earthenware Wash Hand Basin of 55 centimetre x 40 centimetre .size including cold water pillar tap/cold and hot water pillar tap brackets,rubber plugs and brass chain,stop tap and necessary pipe connections including poly vinyl chloride waste pipe and trap up to the outside face of the wall. Making good the damaged surface,testing etc. complete.

C ) Second Floor Providing and fixing white glazed earthenware Wash Hand Basin of 55 centimetre x 40 centimetre .size including cold water pillar tap/cold and hot water pillar tap brackets,rubber plugs and brass chain,stop tap and necessary pipe connections including poly vinyl chloride waste pipe and trap up to the outside face of the wall. Making good the damaged surface,testing etc. complete.

A) Ground Floor Providing and fixing European type wall-hung white water closet of approved make with push valve concealed type with cover plate 32 millimetre size of approved make including soil pipe, vent pipe up to outside face of wall ,100 millimetre diameter galvanised iron plug bend inlet pipe all fittings,cuttingand making good walls, floors etc. complete

B ) First Floor Providing and fixing European type wall-hung white water closet of approved make with push valve concealed type with cover plate 32 millimetre size of approved make including soil pipe, vent pipe up to outside face of wall ,100 millimetre diameter galvanised iron plug bend inlet pipe all fittings,cuttingand making good walls, floors etc. complete

C ) Second Floor Providing and fixing European type wall-hung white water closet of approved make with push valve concealed type with cover plate 32 millimetre size of approved make including soil pipe, vent pipe up to outside face of wall ,100 millimetre diameter galvanised iron plug bend inlet pipe all fittings,cuttingand making good walls, floors etc. complete

A) Ground Floor Providing and Fixing toilets for differently Abled persons consist of Floor Mounted white vitreous china water Closet including 6 litre capacity white vitreous china flushing Cistern with raised soft-push button,white vitreous china wash basin of size 46 x 36 centimetre and one no Stainless steel 304 hinged rail 76 centimetre s and three no Stainless steel 304 of (Grab Bar) 60 centimetre s all including cutting and making good the walls and floors wherever required,seat cover,cistern and wash basin fittings, nuts, bolts and gasket etc complete as per the direction of Engineer-In-charge.

B ) First Floor Providing and Fixing toilets for differently Abled persons consist of Floor Mounted white vitreous china water Closet including 6 litre capacity white vitreous china flushing Cistern with raised soft-push button,white vitreous china wash basin of size 46 x 36 centimetre and one no Stainless steel 304 hinged rail 76 centimetre s and three no Stainless steel 304 of (Grab Bar) 60 centimetre s all including cutting and making good the walls and floors wherever required,seat cover,cistern and wash basin fittings, nuts, bolts and gasket etc complete as per the direction of Engineer-In-charge.

C ) Second Floor Providing and Fixing toilets for differently Abled persons consist of Floor Mounted white vitreous china water Closet including 6 litre capacity white vitreous china flushing Cistern with raised soft-push button,white vitreous china wash basin of size 46 x 36 centimetre and one no Stainless steel 304 hinged rail 76 centimetre s and three no Stainless steel 304 of (Grab Bar) 60 centimetre s all including cutting and making good the walls and floors wherever required,seat cover,cistern and wash basin fittings, nuts, bolts and gasket etc complete as per the direction of Engineer-In-charge.

A) Ground Floor Providing and fixing 10 centimetre poly vinyl chloride nahani trap with grating etc. complete.

B ) First Floor Providing and fixing 10 centimetre poly vinyl chloride nahani trap with grating etc. complete.

C ) Second Floor Providing and fixing 10 centimetre poly vinyl chloride nahani trap with grating etc. complete.

A) Ground Floor Providing and fixing white glazed urinal of series with Pressmatic auto closing valve of having 32 millimetre diameter poly vinyl chloride flush pipe with fitting and flushing of approved make and arrangement including lead soil pipe, lead trap and soil pipe connection upto the outside face of wall etc.complete as directed by Engineer in charge.

B) First Floor Providing and fixing white glazed urinal of series with Pressmatic auto closing valve of having 32 millimetre diameter poly vinyl chloride flush pipe with fitting and flushing of approved make and arrangement including lead soil pipe, lead trap and soil pipe connection upto the outside face of wall etc.complete as directed by Engineer in charge.

C) Second Floor Providing and fixing white glazed urinal of series with Pressmatic auto closing valve of having 32 millimetre diameter poly vinyl chloride flush pipe with fitting and flushing of approved make and arrangement including lead soil pipe, lead trap and soil pipe connection upto the outside face of wall etc.complete as directed by Engineer in charge.

A) Ground Floor Providing and fixing on walls/ ceiling/ floor 15 millimetre diameter chlorinate poly vinyl chloride pipe with necessary Brass fittings, remaking good the demolished portion etc.complete.

B ) First Floor Providing and fixing on walls/ ceiling/ floor 15 millimetre diameter chlorinate poly vinyl chloride pipe with necessary Brass fittings, remaking good the demolished portion etc.complete.

C ) Second Floor Providing and fixing on walls/ ceiling/ floor 15 millimetre diameter chlorinate poly vinyl chloride pipe with necessary Brass fittings, remaking good the demolished portion etc.complete.

A) Ground Floor Providing and fixing on walls/ ceiling/ floor 25 millimetre diameter chlorinate poly vinyl chloride pipe with necessary Brass fittings, remaking good the demolished portion etc.complete.

B ) First Floor Providing and fixing on walls/ ceiling/ floor 25 millimetre diameter chlorinate poly vinyl chloride pipe with necessary Brass fittings, remaking good the demolished portion etc.complete.

C ) Second Floor Providing and fixing on walls/ ceiling/ floor 25 millimetre diameter chlorinate poly vinyl chloride pipe with necessary Brass fittings, remaking good the demolished portion etc.complete.

A) Ground Floor Providing and fixing on walls/ ceiling/ floor 32 millimetre diameter chlorinate poly vinyl chloride pipe with necessary Brass fittings, remaking good the demolished portion etc.complete.

B ) First Floor Providing and fixing on walls/ ceiling/ floor 32 millimetre diameter chlorinate poly vinyl chloride pipe with necessary Brass fittings, remaking good the demolished portion etc.complete.

C ) Second Floor Providing and fixing on walls/ ceiling/ floor 32 millimetre diameter chlorinate poly vinyl chloride pipe with necessary Brass fittings, remaking good the demolished portion etc.complete.

A) Ground Floor Providing and fixing on walls/ ceiling/ floor 40 millimetre diameter chlorinate poly vinyl chloride pipe with necessary Brass fittings, remaking good the demolished portion etc.complete.

B ) First Floor Providing and fixing on walls/ ceiling/ floor 40 millimetre diameter chlorinate poly vinyl chloride pipe with necessary Brass fittings, remaking good the demolished portion etc.complete.

C ) Second Floor Providing and fixing on walls/ ceiling/ floor 40 millimetre diameter chlorinate poly vinyl chloride pipe with necessary Brass fittings, remaking good the demolished portion etc.complete.

Providing and laying in trenches medium grade having embossed as Indian Standard Institute Mark galvanised iron pipes of 50 millimetre diameter at 5.17 kilogramme per metre with necessary fitting, remaking good the demolished portion with filling trenches and with primer of anti corrosive oil paint, 2 coats etc, complete.

Providing and laying in trenches medium grade having embossed as Indian Standard Institute Mark galvanised iron pipes of 80 millimetre diameter at 5.17 kilogramme per metre with necessary fitting, remaking good the demolished portion with filling trenches and with primer of anti corrosive oil paint, 2 coats etc, complete.

A) Ground Floor Providing and fixing chromium plated BIB cock with wall flange jaquar make continental (CAT.NO. CON-047) including necessary sockets/ union nut etc. complete

B ) First Floor Providing and fixing chromium plated BIB cock with wall flange jaquar make continental (CAT.NO. CON-047) including necessary sockets/ union nut etc. complete

C ) Second Floor Providing and fixing chromium plated BIB cock with wall flange jaquar make continental (CAT.NO. CON-047) including necessary sockets/ union nut etc. complete

A) Ground Floor Providing and fixing chromium plated sink cock with raised J shaped swinging casted spout jaquar make continental (CAT.NO. CON -359) including necessary sockets/ union nut etc. complete.

B ) First Floor Providing and fixing chromium plated sink cock with raised J shaped swinging casted spout jaquar make continental (CAT.NO. CON -359) including necessary sockets/ union nut etc. complete.

C ) Second Floor Providing and fixing chromium plated sink cock with raised J shaped swinging casted spout jaquar make continental (CAT.NO. CON -359) including necessary sockets/ union nut etc. complete.

A) Ground Floor Providing and fixing 15 millimetre diameter screw down bib/ stop tap of brass including necessary socket union nut complete.

B ) First Floor Providing and fixing 15 millimetre diameter screw down bib/ stop tap of brass including necessary socket union nut complete.

C ) Second Floor Providing and fixing 15 millimetre diameter screw down bib/ stop tap of brass including necessary socket union nut complete.

A) Ground Floor Providing and fixing 25 millimetre diameter screw down bib/ stop tap of brass including necessary socket union nut complete.

B ) First Floor Providing and fixing 25 millimetre diameter screw down bib/ stop tap of brass including necessary socket union nut complete.

C ) Second Floor Providing and fixing 25 millimetre diameter screw down bib/ stop tap of brass including necessary socket union nut complete.

Providing and fixing 40 millimetre diameter Ball cock medium type with poly vinyl chloride float including sockets and necessary fittings and tested as per municipal requirements etc. complete.

A) Ground Floor Providing and fixing 450 millimetre x 550 millimetre size superior type Belgium mirror with 16 millimetre diameter nickel plated towel rod etc. complete.

B ) First Floor Providing and fixing 450 millimetre x 550 millimetre size superior type Belgium mirror with 16 millimetre diameter nickel plated towel rod etc. complete.

C ) Second Floor Providing and fixing 450 millimetre x 550 millimetre size superior type Belgium mirror with 16 millimetre diameter nickel plated towel rod etc. complete.

A) Ground Floor Providing and fixing chromium plated towel rod 16 millimetre diameter and 75 centimetre . in length including all accessories complete.

B ) First Floor Providing and fixing chromium plated towel rod 16 millimetre diameter and 75 centimetre . in length including all accessories complete.

C ) Second Floor Providing and fixing chromium plated towel rod 16 millimetre diameter and 75 centimetre . in length including all accessories complete.

A) Ground Floor Providing and fixing 100 millimetre diameter chromium plated brass showers rose to 15 millimetre diameter supply pipe including necessary bend and socket complete.

B ) First Floor Providing and fixing 100 millimetre diameter chromium plated brass showers rose to 15 millimetre diameter supply pipe including necessary bend and socket complete.

C ) Second Floor Providing and fixing 100 millimetre diameter chromium plated brass showers rose to 15 millimetre diameter supply pipe including necessary bend and socket complete.

A) Ground Floor Providing and fixing 75 millimetre diameter pipe millimetre diameter stablilliser pipe/ poly vinyl chloride soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete.

B ) First Floor Providing and fixing 75 millimetre diameter pipe millimetre diameter stablilliser pipe/ poly vinyl chloride soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete.

C ) Second Floor Providing and fixing 75 millimetre diameter pipe millimetre diameter stablilliser pipe/ poly vinyl chloride soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete.

A) Ground Floor Providing and fixing 100 millimetre diameter pipe millimetre diameter stablilliser pipe/ poly vinyl chloride soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete.

B ) First Floor Providing and fixing 100 millimetre diameter pipe millimetre diameter stablilliser pipe/ poly vinyl chloride soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete.

C ) Second Floor Providing and fixing 100 millimetre diameter pipe millimetre diameter stablilliser pipe/ poly vinyl chloride soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete.

A) Ground Floor Providing and Fixing 110 millimetre diameter poly vinyl chloride Rain Water pipe with necessary fittings such as bends, tees, single junctions, slotted vent, clamps etc complete.

B ) First Floor Providing and Fixing 110 millimetre diameter poly vinyl chloride Rain Water pipe with necessary fittings such as bends, tees, single junctions, slotted vent, clamps etc complete.

C ) Second Floor Providing and Fixing 110 millimetre diameter poly vinyl chloride Rain Water pipe with necessary fittings such as bends, tees, single junctions, slotted vent, clamps etc complete.

Providing and fixing 15 centimetre x 10 centimetre salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap.

Providing and constructing Brick Masonry Inspection Chamber 90 centimetre x 45 centimetre x 90 centimetre including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round glazed stoneware pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete etc. complete with reinforced cement concrete Cover

Providing and constructing Brick Masonry Inspection Chamber 60 centimetre x 45 centimetre x 90 centimetre including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round glazed stoneware pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete etc. complete with reinforced cement concrete Cover.

B ) First Floor Providing and fixing high density polymer Container Syntex or alike one piece moulded water tank made out of high density Polyethyler and built Corrugated inclusive delivery up to distination housting fixing of accesseries such as inlet ,outlet overflow pipe inclusive of all Tanks Capacity above 1000 litres to 20000 litres.

Providing and laying 100 millimetre diameter salt glazed stoneware pipe including fittings such as bends, tees, single junction, double junctions laying, jointing (including excavation and refilling the trenches) complete.

Providing and laying 150 millimetre diameter salt glazed stoneware pipe including fittings such as bends, tees, single junction, double junctions laying, jointing (including excavation and refilling the trenches) complete.

Providing and fixing 90 centimetre . X 60 centimetre Granite year plate engraving 10 centimetre height letter, figures including painting the letter/figures with approved colour and shade complete.

A) Ground Floor Providing and fixing heavy duty inter locking concrete Rubber mould glossy paving blocks of 60 millimetre thickness of having a strength of 400 kilogramme per square centimetre . of approved auqlity and shape on a bed of crushed sand of 25 to 30 millimetre thick including skirting joints and cleaning etc. complete

Providing and laying concrete pipes of Indian Standard Non-pressure class of 150 millimetre dia in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete.

Second Floor Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/bolted/welded connections and one coat of anticorrosive paint and over it 2 coats of oil painting complete.

C) Second Floor Providing and fixing colour coated Zincalume (R) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing.The feed material is manufactured out of nominal 0.45 millimetre Base Metal Thickness ( BMT ) (0.5 millimetre TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55 Percent aluminium 43.4 Percent zinc 1.6 Percent silicon) with COLORBOND(R) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 millimetre effective cover width and nominal 25-30 millimetre deep ribs with subtle square fluting in the five pan at nominal 180-250 millimetre center-to-center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 kilogramme per square metre )

A) Ground Floor Providing and laying chequered tiles of approved quality of size 30 centimetre x 30 centimetre , confirming to corresponding Indian Standard for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete.

A) Ground Floor Providing expansion joints in reinforced cement concrete framed structure (at floor level) with premoulded filler 25 millimetre thick and 3 millimetre thick aluminium plate as required, bitumen poured filler and fixing teak wood battens on rear faces etc. complete as directed.

B ) First Floor Providing expansion joints in reinforced cement concrete framed structure (at floor level) with premoulded filler 25 millimetre thick and 3 millimetre thick aluminium plate as required, bitumen poured filler and fixing teak wood battens on rear faces etc. complete as directed.

C ) Second Floor Providing expansion joints in reinforced cement concrete framed structure (at terrace level) with premoulded filler 25 millimetre thick and 3 millimetre thick aluminium plate as required, bituminous poured filler, fixing lead, flashing on upper side and teak wood battens on inner face finishing etc. Complete as directed.

A) Ground Floor Providing expansion joints in reinforced cement concrete framed structure (interior column) with plain premoulded filler 25 millimetre thick including fixing teak wood battens on both faces and finishing as directed etc. Complete.

B ) First Floor Providing expansion joints in reinforced cement concrete framed structure (interior column) with plain premoulded filler 25 millimetre thick including fixing teak wood battens on both faces and finishing as directed etc. Complete.

C ) Second Floor Providing expansion joints in reinforced cement concrete framed structure (interior column) with plain premoulded filler 25 millimetre thick including fixing teak wood battens on both faces and finishing as directed etc. Complete.

A) Ground Floor Providing expansion joints in reinforced cement concrete framed structure (exterior Columns) with plain premoulded filler 25 millimetre thick and 3 millimetre thick alluminium plate, hold fast, fixing teak wood battens on internal face, finishing etc. complete as directed.

B ) First Floor Providing expansion joints in reinforced cement concrete framed structure (exterior Columns) with plain premoulded filler 25 millimetre thick and 3 millimetre thick alluminium plate, hold fast, fixing teak wood battens on internal face, finishing etc. complete as directed.

C ) Second Floor Providing expansion joints in reinforced cement concrete framed structure (exterior Columns) with plain premoulded filler 25 millimetre thick and 3 millimetre thick alluminium plate, hold fast, fixing teak wood battens on internal face, finishing etc. complete as directed.

A) Ground Floor Providing and applying laying Aggregate plaster in granite/arble stones,as decorative finish to give granite /marble like appearance to concrete, brick or block surfaces in all position including preparation of surface smoothly, evenly by racking of joints in case of Brick or block work including backing layer of 12 millimetre thick with cement mortar 1:3 with 2 Percent integral cement water proofing compound, roughening for wall keying hardening and drying the surface for a minimum five days gaps including second coat of cement lime mortar into a proportion 1:4 preparing the surface for three coat of marble finish plaster giving a thin coat of white cement and two parts of course calcite powder, applying the mortar with steel float on the surface in proper evenness applying at coat of white cement and lime to set a smooth finish then applying a thin coat of slurry made of white cement and black oxide colour in required proportion by the steel float to get black streaks on the surface and curing the surface for two days including all materials and labour etc. complete.

B ) First Floor Providing and applying laying Aggregate plaster in granite/arble stones,as decorative finish to give granite /marble like appearance to concrete, brick or block surfaces in all position including preparation of surface smoothly, evenly by racking of joints in case of Brick or block work including backing layer of 12 millimetre thick with cement mortar 1:3 with 2 Percent integral cement water proofing compound, roughening for wall keying hardening and drying the surface for a minimum five days gaps including second coat of cement lime mortar into a proportion 1:4 preparing the surface for three coat of marble finish plaster giving a thin coat of white cement and two parts of course calcite powder, applying the mortar with steel float on the surface in proper evenness applying at coat of white cement and lime to set a smooth finish then applying a thin coat of slurry made of white cement and black oxide colour in required proportion by the steel float to get black streaks on the surface and curing the surface for two days including all materials and labour etc. complete.

C ) Second Floor Providing and applying laying Aggregate plaster in granite/arble stones,as decorative finish to give granite /marble like appearance to concrete, brick or block surfaces in all position including preparation of surface smoothly, evenly by racking of joints in case of Brick or block work including backing layer of 12 millimetre thick with cement mortar 1:3 with 2 Percent integral cement water proofing compound, roughening for wall keying hardening and drying the surface for a minimum five days gaps including second coat of cement lime mortar into a proportion 1:4 preparing the surface for three coat of marble finish plaster giving a thin coat of white cement and two parts of course calcite powder, applying the mortar with steel float on the surface in proper evenness applying at coat of white cement and lime to set a smooth finish then applying a thin coat of slurry made of white cement and black oxide colour in required proportion by the steel float to get black streaks on the surface and curing the surface for two days including all materials and labour etc. complete.

A) Ground Floor Providing and applying Texture plaster with finishing with texture material of approved make in 3 to 4 millimeter thickness on previously plastered surface, including Plaster Groove 6 millimetre thickness or Tape Grooves 35 to 45 millimetre thickness or as required, in all position including preparing the surface, scaffolding etc. complete. (Front Elevation Portion )

B ) First Floor Providing and applying Texture plaster with finishing with texture material of approved make in 3 to 4 millimeter thickness on previously plastered surface, including Plaster Groove 6 millimetre thickness or Tape Grooves 35 to 45 millimetre thickness or as required, in all position including preparing the surface, scaffolding etc. complete. (Front Elevation Portion )

C ) Second Floor Providing and applying Texture plaster with finishing with texture material of approved make in 3 to 4 millimeter thickness on previously plastered surface, including Plaster Groove 6 millimetre thickness or Tape Grooves 35 to 45 millimetre thickness or as required, in all position including preparing the surface, scaffolding etc. complete. (Front Elevation Portion )

A) Ground Floor Providing and fixing in position after hoisting, precast 1:2 cement mortar reinforced jali 50 millimetre thick with 3 millimetre diameter mild steel bar reinforcement, of approved design on both side, fixing in cement mortar 1:3 and curing etc. complete

B ) First Floor Providing and fixing in position after hoisting, precast 1:2 cement mortar reinforced jali 50 millimetre thick with 3 millimetre diameter mild steel bar reinforcement, of approved design on both side, fixing in cement mortar 1:3 and curing etc. complete

C ) Second Floor Providing and fixing in position after hoisting, precast 1:2 cement mortar reinforced jali 50 millimetre thick with 3 millimetre diameter mild steel bar reinforcement, of approved design on both side, fixing in cement mortar 1:3 and curing etc. complete

Compound Wall Providing uncoursed rubble masonry of trap stones in cement mortar 1:6 in foundation and plinth of inner walls / in plinth of external walls including bailing out water manually, striking joints on un exposed faces and watering etc.complete.

Providing uncoursed rubble masonry of trap / stones in cement mortar 1:6 in superstructure including racking out joints when plastering is to be done / striking joints when no plastering is to be done on inside watering and scaffolding etc.complete.

Providing and applying two coats of textured synthetic paint of approved shade and quality and one coat of primer before applying textured paint including scaffolding if necessary preparing surface by thoroughly cleaning oil, grease, dirt and other materials as required,etc. complete

Providing and fixing mild steel grill gate with angle iron frame 65 millimetre x 65 millimetre x 10 millimetre with iron bars at 150 millimetre centre to centre and diagonal flats as per the detailed drawing including hinges, pivot block locking arrangement, welding riveting and oil painting of three coats of approved shade Weight of gate 35 kilogramme per square metre

Providing and casting in situ cement concrete in Mix-20 of trap metal for reinforced cement concrete coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including centering, formwork,

Providing flush grooved pointing with cement mortar 1:3 for stone masonry work including scaffolding and curing etc. complete.

Providing and fixing in position after hoisting, precast 1:2 cement mortar reinforced jali 50 millimetre thick with 3 millimetre diameter mild steel bar reinforcement, of approved design on both side, fixing in cement mortar 1:3 and curing etc. complete

Internal Road Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with Intelligent Compactor with compaction analyzer and V-Sat attachment.to the required density. Grading I (Using Screening Type B (11.2 millimetre) Aggregate

Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to Indian Standard: 383, the size of coarse aggregate not exceeding 25 millimetre ,cement content not to be less than 150 kilogramme per cubic metre , optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant/ Weigh batch mixer,transported to site with all leads and lifts, laid with a paver with electronic sensor /by suitable means as approved by Engineerin-charge , compacting with vibratory roller, finishing,curing and including preparation of sub-grade surface if required etc complete

Providing and fixing in position Thermo Mechanically Treated (TMT) FE 500, 25 millimetre diameter dowel bars precoated with anticorrosive epoxy paint of required diameter 60 centimetre s.Long and at 30.00 centimetre . centre to centre and wherever directed including handling straightening, necessary cutting supported by Thermo Mechanically Treated (TMT) FE 500, chairs with proper alignment by using properly designed assembly of Bulkheads lubricating half length with bituminous paint as directed etc. complete.

Providing and fixing in position Thermo Mechanically Treated (TMT) FE 500,tie bars precoated with anticorrosive epoxy paint of 12 millimetre diameter 70 centimetre s.long and at 30.00 centimetre centre to centre and wherever directed including handling, straightening wrapping with paper of approved quality for half length,necessary cutting, handling, straightening, supported by assembly of Thermo Mechanically Treated (TMT) FE 500, chairs with proper alignment etc. complete.

Cutting transverse contraction joints 3 to 4 millimetre wide and depth 60 millimetre . .in concrete slab using concrete cutting machine with diamond studded saw within 48 hours of casting of bay / slab etc. complete including subsequent widening of the groove 8 to 10 millimetre . wide at top having depth of 15 millimetre . as directed by Engineer incharge.

Providing to contraction joints polysuphide sealent (Pouring grade) confirming to BS : 5212 - 1989 into sawed groove widened at top for sealent reservoir of specified size and shape as per detailed drawing including fixing Polyethylene foam backer rod of required diameter (appraox. 25 Percent larger than the initial 3 millimetre .to 4 millimetre . joint) overlaid with bond breaking tape as per detailed drawing. Item includes cleaning the joints with water jet / air compressor and allowing joint to become thoroughly dry before sealent is applied and applying primer.(A) Contraction and longitudinal joints (15 millimetre . deep x 8 millimetre .wide)

Providing and laying in situ cement concrete Mix -30 with tremix treatment for 200 millimetre thickness for Concrete Road is including laying plastic sheet for 125 micron thickness with groove cutting of 4 millimetre wide and 20 millimetre deep with necessary refilling poly suphide sealent (Pouring grade)confirming to BS:5212-989 into sawed groove widened at top for sealent reservoir of specified size and shape as per detailed drawing including fixing Polyethylene foambacker rod of required diameter (excluding reinforcement) with coarsen and fine aggregate Using Vertical shaft impact (VSI) Quality Artifitial Sand etc. complete

Providing cast in situ / ready mix Mix-20 grade cement concrete for head walls of cross drainage work / retaining walls etc. including necessary form work, compaction, finishing and curing etc. complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with SCADA with Natural / Vertical Shaft Impact (VSI) standard Artificial Sand)

Providing and laying cement concrete pipe of Indian Standard 458:2003 Non-pressure -3 class of 900 millimetre diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete.

Septic Tank Providing fine cement finish 1.5 millimetre thick over green plaster surface including scaffolding curing etc complete.

Providing soak pit of size 120 centimetre x 120 centimetre x 120 centimetre including excavating and filling with brick-bats.

Providing and laying in trenches medium grade having embossed as Indian Standard Institute Mark galvanised iron pipes of 50 millimetre diameter at 5.17 kilogramme per metre with necessary fitting, remaking good the demolished portion with filling trenches and with primer of anti corrosive oil paint, 2 coats etc, complete.

Providing and laying in trenches medium grade having embossed as Indian Standard Institute Mark galvanised iron pipes of 80 millimetre diameter at 5.17 kilogramme per metre with necessary fitting, remaking good the demolished portion with filling trenches and with primer of anti corrosive oil paint, 2 coats etc, complete.

Providing and laying in trenches medium grade having embossed as Indian Standard Institute Mark galvanised iron pipes of 100 millimetre diameter at 5.17 kilogramme per metre with necessary fitting, remaking good the demolished portion with filling trenches and with primer of anti corrosive oil paint, 2 coats etc, complete.

Rain Water Harvesting RWH - Shallow Percolation Pit Providing, constructing 2.0 metre deep shallow depth percolation pit comprising of 1.0 ,metre diameter pre-cast reinforced cement concrete rings, 300 millimetre thick side filling around outside of reinforced cement concrete rings (annular space) with 40 millimetre size boulders including filling of perc

RWH - Recharge Pit Providing, constructing recharge pit of 2.0 metre deep and 1.0 metre diameter of pre-cast reinforced cement concrete rings with 6.5 inch diameter x 25 metre deep borewell at the floor of recharge pit including installation of combination of solid/perforated poly vinyl chloride casing pipe wrapped around

Boring/drilling bore well of 300 millimetre dia for casing/ strainer pipe, by suitable method prescribed in Indian Standard : 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire and running charges .

Supplying, assembling, lowering and fixing in vertical position in bore well, Non-pressure lasticized poly vinyl chloride medium well casing pipe of 150 millimetre dia,conforming to IS: 12818, including required hire and labour charges, fittings and accessories etc. all complete, for all de

Supplying, assembling, lowering and fixing in vertical position in bore well,uNon-pressure lasticized poly vinyl chloride medium well screen pipes with ribs of 100 millimetre dia,conforming to Indian Standard : 12818, including required hire and labour charges, fittings and accessories etc. all complete,

Supplying,filling,spreading and leveling stone boulders of size range 5 centimetre to 20 centimetre , in recharge pit, in the required thickness, for all leads and lifts,all complete as per direction of Engineer-in-charge

Supplying, filling, spreading and leveling gravels of size range 5 millimetre to 10 millimetre , in the recharge pit, over the existing layer of boulders, in required thickness, for all leads and lifts, all complete as per direction of Engineer-incharge

Supplying, filling, spreading and leveling coarse sand of size range 1.5 millimetre to 2 millimetre in recharge pit, in required thickness over gravel layer, for all leads and lifts, all complete as per direction of Engineer -in-charge

Gravel packing in tubewell construction in accordance with IS: 4097,including providing gravel fine/ medium/ coarse, in required grading and sizes as per actual requirement, all complete as per direction of Engineerin-

Land Development Providing earth work in embankment with approved materials obtained from other sources upto lead of 50 metre including all lifts,laying in layers of 20 centimetre . to 30 centimetre . thickness breaking clods, dressing to the required lines, curves, grades and section, watering and compaction with vibratory roller with V-Sat attachment to achieve not less than 97 Percent of standard proctor density etc. complete (Material obtained from Other sources)

Generator Room and Pump Room Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in cement mortar 1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with cement mortar 1:3 admixed with approved water proofing compound and finally top finishing with average 20 millimetre .thick layers of same mortar added with jute fiber at 1 kilogramme per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300 millimetre x 300 millimetre . making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete.

Providing and applying washable oil bound distemper of approved colour and shade to old and new surfaces in two coats including scffolding, preparing the surface (Including the primer coat.)

Providing and applying two coats of textured synthetic paint of approved shade and quality and one coat of primer before applying textured paint including scaffolding if necessary preparing surface by thoroughly cleaning oil, grease, dirt and other materials as required,etc. complete

Providing and laying cement concrete flooring 40 millimetre thick with Mix-20 cement concrete laid to proper level and slope in alternate bays,including ompaction,filling joints,marking lines to give appearance of tiles of 30 centimetre x 30 centimetre or other size laid diagonally/square etc.finishing smooth (with extra cement) in any colour as directed and Curing etc.complete.With Crushed Sand

Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 millimetre with lock plate of 3.15 millimetre thickness reinforced with 35 millimetre x 35 millimetre x 5 millimetre angle section fitted with sliding bolts and handles for both sides, deep mild steel channel section of depth and thickness not less than 65 millimetre and 3.15 millimetre respectively with hold fast arrangements, mild steel Bracket plate 300 x 300 x 3.15 millimetre minimum size and shape with square bar, suspension shaft of minimum 32 millimetre diameter, hood cover of mild steel sheet not less than 0.9 millimetre thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc.complete. (Indian Standard 62481979) (With mechanical gear)

Providing and fixing solid core flush door shutter commercial in single leaf 32 millimetre thick without ventilator commercial type of exterior grade as per detailed drawings with wrought iron hold fast,stainless steel fixtures and fastenings and handles on both sides and finishing with oil painting 3 coats complete.

Providing and fixing in position.(as per Indian Standard 1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 millimetre at weight 0.547 kilogramme per running metre and window frame bottom track section 61.85 x 31.75 x 1.20 millimetre at weight 0.695 kilogramme per running metre Top and side track section 61.85 x 31.75 x 1.30 millimetre at weight 0.659 kilogramme per running metre The shutter should be of bearing bottom 40 x 18 x 1.25 millimetre at weight 0.417 kilogramme per running metre Inter locking section 40 x 18 x 1.10 millimetre at weight 0.469 kilogramme per running metre And handle section 40 x 18 x 1.25 millimetre at weight 0.417 kilogramme per running metre and top section 40 x 18 x 1.25 millimetre at weight 0.417 kilogramme per running metre As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 millimetre thick plain glass with all required screws and nuts etc, complete. With powder coating without box

Providing and fixing mild steel grill work for windows, ventilators etc. 20 kilogramme per square metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete.

Biodigester Unit Providing and installing biodigester unit based on DRDO technology made of fibre reinforced plastic (FRP) having composition and following technical specifications and including necessary pipe and accessories upto 3 meter length,excluding the necessary excavation for installing the bio digester.Percentage of fibre glass (glass content in fibre glass should be minimum 30 Percent ): -33.33 Percent Percentage of polyester resin:- 66.67 Percent Water absorption (as per ASTM):-0.30 Percent Fla millimetre ability as per ASTM Tensile strength:-115 MPA Specific Gravity at 25 degree centigrade 1.45Izod impact strength:-65KJ/M2 Heat defection/distort temperature:-65deg CCorrosion resistance (Non Corrosive) fitted with Inlet pipe size rigid poly vinyl chloride : -100 millimetre Outlet pipe size rigid poly vinyl chloride :-80 millimetre Gas outlet rigid poly vinyl chloride with Valve: 20 millimetre Bacteria i millimetre obilization poly vinyl chloride mattes (on all partition) With DRDOTO Tlicensee and latest batch certificate (month and year of supply) and capacity as below Upto 150 user size (3.2mx2.0mx1.25m),Capacity of Biodigester:-8000 liters,Area of top,bottom and sidewalls:-25.80 sq.m,Area of partition walls:10.00 sq.m,Total weight of FRP:-397.08 kilogra millimetre e ,Bacteria inoculums quantity:-3200 liters,Minimum thickness of side walls/ top and bottom:7 millimetre ,Number of inside partitions:-4,Minimum thickness of partition wall: 4 millimetre.

Estimate no : 123118-1 of 2020-2021Providing Internal Electrification to Court Building Ghodnadi- Shirur Tal: Shirur Dist:Pune Supplying and erecting HMS P.V.C. conduit 25 mm. dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.

Supplying and laying HMS PVC conduit 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.

Supplying and erecting HMS P.V.C. conduit 32 mm. dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.

Supplying and erecting green colour earthing with 1x 1.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG- MA/BW

Supplying and erecting mains with 2x2.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW ( for computer pt and MCB to SB= 154x15, and 239x15= 5895

Supplying and erecting green colour earthing with 1x 2.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Supplying and erecting mains with 2x4 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW ( for AC and PP 57x20 mtr= 1140 + SPN DB 4x150= 600

Supplying and erecting green colour earthing with 1x 4 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Supplying and erecting mains with 4x6 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW ( From Meter Room to Each DB )

Supplying and erecting mains with 4x 10 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying and erecting ISI mark modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type switch 16A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type 3 pin 6A multi sockets with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type T.V. socket single outlet, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI marked modular type telephone socket one gang with safety shutter, duly erected on provided plate and box with wiring connections complete

Supplying and erecting ISI mark modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete. Note: Add Rs 57/- for additional two module box with double mounting plate if required

Supplying and erecting ISI mark modular type blanking plate one module, duly erected on provided plate & box.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 1 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background..

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 12 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Point wiring for light/fan/bell concealed type in min 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm. (2+1E) FR grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/CW

Wiring for plug on board with Switch socket concealed type, copper wiring and earthing and with modular accessories as per specification No: WG-PW/CW

Supplying and erecting telephone copper cable 2 pair with 0.5 mm dia. laid in provided PVC casing capping/ conduit as per specification No. WG-TW

Supplying and installing co-axial copper cable low voltage grade RG-6 as per specification No. WG-TW

Supplying and erecting CRCA /die-cast aluminium powder coated housing LED panel light (slim edge-lit) square / round shape suitable for 19 to 24 W with provision for plane front frame with translucent cover fixed to the housing complete.

Supplying and erecting decorative oval bulk head edge-lit 10W LED luminaire comprising of high brightness LED Fitting on provided PVC block / wooden board.

Supplying and erecting LED 18W tube light fitting (4 feet) with polycarbonate housing, heat sink, integrated HF electronic driver complete.

Supplying and erecting ding dong / electronic musical type call bell with heavy duty coil suitable to operate on 230V A.C. supply erected on polished double wooden block/sunmica block of suitable size

Supplying and erecting fresh air cum exhaust fan of light duty250 V A.C. 50 cycles 225mm. 1400 RPM rust proof body & blades, wire mesh, duly erected in an approved manner.

Supplying and erecting five star rated energy saving Ceiling fan 230 V A.C. 50 cycles 1200 mm complete erected in position as per specification no. FG-FN/CF

Supplying and erecting fan hook box of 10 mm M.S. round bar bounded to the R.C.C. bars upto 50 mm length each side and pierced through a 16 S.W.G. thick aluminium/M.S. Bowl 100 mm dia.or equivalent square size and having depth upto 75 mm complete erected with duly painted by one coat of red oxide paint and two coats of paint erected in position and without any leakage of slurry of cement concrete on either side of the box and positioned to the bottom level of the slab.

Supplying and erecting ‘B’ grade G.I. pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire.

Supplying, erecting and marking SPMCB 6A to 32A, C-series (for motor/power) in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting and marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification no. SW- SWR/MCB

Supplying, erecting and marking DPMCB 6 A to 32 A B- series (for lighting) in provided distribution board as per specification no. SW- SWR/MCB

Supplying, erecting and marking TPMCB 40A to 63A in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting and marking FPMCB 40A to 63A in provided distribution board as per specification no. SW-SWR/MCB

Supplying and erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SPMCB of 12 ways, on iron /GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB

Supplying and erecting single pole and neutral distribution board (SPNDB) with door surface/flush mounted with 2 ways for incoming and 10 ways for outgoing SP MCB’s on iron/ GI frame as per specification no. SW-SWR/MCBDB

Supplying and erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted suitable for 3 pole MCCB as incomer & outgoing SP MCB (24 poles) or TP MCB of 8 ways (24 poles) , on iron/ GI frame. (vertical busbar type) as per specification no. SW-SWR/MCBDB1

Providing and erecting 3 Pole MCCB upto 100A, 415V, with short circuit rating 25 kA (Ics=100% of Icu ),adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame as per specification no. SW-SWR/MCCB

Providing and erecting 4 Pole MCCB upto 100A, 415V, with short circuit rating 25 kA (Ics=100% of Icu ),adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame as per specification no. SW-SWR/MCCB

Providing and erecting 4 Pole MCCB of 200A,415V capacity with short circuit rating 25 kA (Ics=100% of Icu) adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame as per specification no. SW-SWR/MCCB

Providing and erecting 4 Pole MCCB of 315/400A, 415V capacity with short circuit rating 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame as per specification no. SW-SWR/MCCB

Providing and erecting floor / wall mounting, MCCB panel board with door suitable for four pole incoming 250A, 4 ways four pole outgoing upto 100 A MCCB's on iron frame, as per specification no SW-SWR/MCCBPB. (Excluding MCCB'S)

Providing and erecting floor / wall mounting, MCCB panel board with door suitable for four pole incoming 400 A, 6 ways four pole outgoing upto 100 A MCCB's on iron frame, as per specification no SW-SWR/MCCBPB. (Excluding MCCB'S)

Providing and erecting incoming and outgoing cable alleys suitable for MCCB panel board with door of 250A incoming and 4 way outgoing or 400A incoming and 2 way outgoing made from CRCA sheet 1.6 mm thick duly powder coated and having vertical insulated partition for shielding between the shared face of cableway and DB complete.

Providing and erecting incoming and outgoing cable alleys suitable for MCCB panel board with door of 250A incoming and 12 way outgoing or 400A incoming and 6/8 way outgoing made from CRCA sheet 1.6 mm thick duly powder coated and having vertical insulated partition for shielding between the shared face of cableway and DB complete.

Providing and erecting prewired meter module suitable for MCCB panel board with CT's and emf's VIF meter complete.

Supplying and erecting marine plywood 18/19 mm thick fixed to wall or on provided panel board with necessary materials such as screws, wall fasteners, supports, nut bolts etc. complete.

Supplying, erecting & terminating XLPE armoured cable 4 core 16 sq. mm. copper conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating XLPE armoured cable 4 core 35 sq. mm. copper conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover complete with all materials, testing & recording the results as per specification no. EA-EP

Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification no EA-EP.

Estimate no : 123118-2 of 2020-2021 Providing Street Lights In the Campus of Court Building At Ghodnadi-Shirur Tal: Shirur Dist: Pune Supplying and erecting PVC insulated PVC round sheathed 1.5 sq.mm (30 no. x 0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV ( 21 pole x 6 mtr= 126

Supplying and erecting LED street light fitting suitable for 60W lamp, including lamp, with PF > 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete as per specification No FG- ODF/FLS-2.

Supplying, erecting and marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification no. SW- SWR/MCB

Supplying, erecting & terminating XLPE armoured cable 4 core 10 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Providing and erecting 6 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH- PL/OPL

Providing and erecting galvanised 1000mm double arm sword type bracket with FRP dome and ball as per specification no. OH- PL/PBKT

Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with all materials as per specification no. EA- EP

Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical GI pole).

Estimate no : 123118-3 of 2020-2021 Providing AC Unit in the Court Building At Ghodnadi-Shirur Tal:Shirur Dist: Pune Supplying, installing, testing and commissioning of split type variable speed Inverter technology room Air conditioning unit 1.5 TR capacity having ISEER minimum 4.50 suitable to operate on250V, 50 cycles, A.C. supply having 1 no of air handling unit hiwall / floor mounting type complete with refrigerant R410 A/R32 and copper condensor at position. specification no.APAC/ SAC

Supplying and erecting soft drawn copper pipe suitable for refrigeration system having 22 SWG thickness and inner dia / size 12 mm complete

Supplying and erecting soft drawn copper pipe suitable for refrigeration system having 22 SWG thickness and inner dia / size 16 mm complete.

Supplying, installing, testing and commissioning of cassette type variable speed inverter technology split room airconditioning unit 2 TR capacity having ISEER minimum 3.50 to maximum 3.99 suitable to operate on 230/250 V, 50 cycles, AC supply having 1 no. air handling unit false ceiling mounting type complete with refrigerant R32/R410A and copper condenser coil at position as per specification with provided copper piping and drainage pipe.

Supplying, installing, testing and commissioning of cassette type split room air conditioning unit 1.5 TR having ISEER minimum 4.50 suitable for capacity 230/250 V, 50 cycles, AC supply having 1 no. air handling unit false ceiling mounting type complete with refrigerant R32/R410A and copper condenser coil at position with provided copper piping and drainage pipe.

Supplying, erecting, testing and commissioning of self contained water cooler 230/250 Volts 50 cycles nominal cooling capacity of 150 liters/hr and storage capacity 150 liters with partially stainless steel body complete. specification no. AP-WCR/WC

Supplying and erecting ultra voilet storage type water purifier (RO+UV+UF) with softener for safe drinking water consisting of UV germicidal tube of 8W capacity choke made of copper wire and two indicator lamps, storage capacity of purified water 7 to 8 litre with activated carbon filter and softener operating on 230V single phase AC supply.

Carrying out core cutting of size 3" to 5" dia x 15" length in the C.C./rock/stone wall with the help of specialized core cutting machine in proper manner and finishing the site as original.

Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for over coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 12 mm for solar water heater system.

Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for over coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 16 mm for solar water heater system.

Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

Supplying and erecting HMS P.V.C. conduit 25 mm. dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.

Estimate no : 123118-4 of 2020-2021 Providing Fire fighting & fire alarm system in the proposed Court Building At Ghodnadi-Shirur Tal: Shirur Dist: Pune Supplying and erecting HMS P.V.C. conduit 25 mm. dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.

Supplying and laying HMS PVC conduit 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.

Carrying out core cutting of size 3" to 5" dia x 15" length in the C.C./rock/stone wall with the help of specialized core cutting machine in proper manner and finishing the site as original.

Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

Supplying, erecting & terminating XLPE armoured cable 3 core 4 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 3 core 16 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 3½ core 95 sq. mm. aluminium conductor with continuous 8.35 sq. mm. (10 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 3½ core 120 sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 90 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Providing and erecting Hot dipped galvanized ladder type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 150 mm width & 100 mm height comprising all required standard accessories.

Providing Round bottom fire bucket of 9 Litres capacity as per IS : 2546 made out of 24 gauge G.I. sheet with extra handle at bottom duly painted white inside and red outside with FIRE Mark, on provided stand/ wall hook complete.

Providing Floor mounting stand for keeping 4 Nos. of FIRE buckets 1500mm in length, 900mm in height frame made out of 30x30x4 mm angle iron with cross supports for legs, welded with 4 hooks and duly painted with one coat of red lead and two coats of silver paint complete.

Supplying and erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts grouted in wall complete.

Supplying and erecting ABC powder type fire extinguisher as per IS : 13849 /15683 of 6 kg capacity with necessary clamp for erection on wall.

Supplying and erecting D.O.L. Starter 400V. 3 phase, 50 cycles with no volt coil and overload element with necessary materials and connected to supply upto 7.5 H.P.

Supplying, installing, testing and commissioning of with perfect aligning, proper levelling of fire service main single stage pump, of 2400 LPM at 76 m head centrifugal type, 75 HP (55 kW) 3 phase, 415 volt, 50Hz or of suitable HP complete as per specification no. FF-MFP/SSC

Supplying, installing, testing and commissioning of with perfect aligning, proper levelling of jockey pump of 240 LPM at 105 m head 20 HP (15 kW), 3 phase, 415 volt, 50Hz or of suitable HP with suitable stages as per specification no. FF-MFP/JP

Supplying, installing, testing and commissioning of with perfect aligning, proper levelling of booster pump of 450 LPM at 35 m head 7.5 HP (5.5 KW), 3 phase, 415 volt, 50Hz or of suitable HP with suitable stages as per specification no. FF-MFP/BP

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 75/80 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 100 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 150 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 200 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting cast iron foot valve ball type/flap type of size 100 mm dia with strainer for negative suction complete as per specification no. FF-VL/FV

Supplying and erecting cast iron foot valve ball type/flap type of size 150 mm dia with strainer for negative suction complete as per specification no. FF-VL/FV

Supplying and erecting 100 mm dia end line strainer for positive suction complete as per specification no. FF-VL/ELS

Supplying and erecting 150 mm dia end line strainer for positive suction complete as per specification no. FF-VL/ELS

Supplying and erecting cast iron double flange butterfly valve of size 100 mm dia. complete as per specification no. FF-VL/BFV

Supplying and erecting cast iron double flange butterfly valve of size 150 mm dia. complete as per specification no. FF-VL/BFV

Supplying and erecting cast iron double flange butterfly valve of size 200 mm dia. complete as per specification no. FF-VL/BFV

Supplying and erecting cast iron double flange NRV of size 100 mm dia complete as per specification no. FF-VL/NRV

Supplying and erecting cast iron double flange NRV of size 150 mm dia complete as per specification no. FF-VL/NRV

Supplying and erecting cast iron double flange NRV of size 200 mm dia complete as per specification no. FF-VL/NRV

Supplying and erecting gun metal single outlet hydrant valve fitted with necessary accessories complete as per specification no. FF-VL/HV

Supplying and installing one piece moulded HDPE / fibre water tank for negative suction only, having capacity 1000 litres fitted with necessary accessories complete as per specification no. FF-FFA/PT

Supplying and installing wall mounting swinging Hose reel drum fitted with 19 mm dia. 30m long high pressure polypropylene (Polyhose) fitted with necessary accessories complete as per specification no. FF-FFA/HV

Supplying fire fighting reinforced rubber lined (R.R.L.) hose pipe, 63mm dia, 15m in length, fitted with necessary accessories complete as per specification no. FF-FFA/RRL

Supplying and erecting gun metal branch pipe of 63 mm dia fitted with 20 mm dia detachable hexagonal nozzle complete as per specification no. FF-FFA/NZ

Supplying and erecting fire brigade header of 150 mm dia, for supplying water in fire tank complete as per specification no. FF- FA/FBC

Supplying and erecting fire brigade header (Siamese connection) of 150 mm dia for supplying water to wet riser system complete as per specification no. FF-FFA/SMC

Supplying and installing air vessel of 300 mm dia 1.5m in height M.S. tank installed inside pump house / on terrace complete as per specification no. FF-FFA/ACT

Supplying and erecting 20/25mm dia gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification no. FF-FFA/ARV

Supplying and installing pressure gauge of 100 mm dia., 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve, and G.I. pipe, elbow etc. complete as per specification no. FF- FFA/PG

Supplying and installing pressure switch with 12/15 mm dia isolation valve, G.I. nipple, elbow, etc complete as per specification no. FF-FFA/PS

Supplying and erecting one no. brass orifice plate having 6 mm. thickness, 160 mm outer dia and required/proper diameter of inner hole at every double outlet hydrant valve as per specification no. FF-FFA/OP

Supplying and erecting M.S./CRCA cabinet for housing Fire Brigade / SIEMESE connections (size 1250 x 400 x 300 mm.) made from 16 SWG sheet and angle iron 25 mm. x 25 mm. x 4 mm. having front doors with viewing glass (8" x 6") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour.

Supplying and erecting M.S./CRCA cabinet for housing Floor Hydrant valve, hose pipe, hose reel and branch pipe (size 1000 x 736 x 736 mm.) made from 16 SWG sheet and angle iron 25 x 25 x 4 mm. having front doors with viewing glass (8"x6") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour.

Supplying, installing, testing and commissioning of heat detector complete on box as per specification no. FF-FAS/HD

Supplying, installing, testing and commissioning of optical type smoke detector complete on box as per specification no. FF- FAS/SD

Supplying, installing, testing and commissioning of manual call point (Pill box) with break glass push button in metal enclosure complete as per specification no. FF-FAAS/MCP

Supplying, installing, testing and commissioning of hooters with CRCA enclosure complete as per specification no. FF-FAAS/HTR

FIRE FIGHTING PUMP PANEL INCOMER SPD TYPE-2 1No.300A 4P MCCB (25 KA) ,MICROPROCESSOR BASED METERING & INDICATION 1 set of phase indicating lamps 1 set of Voltmeter (0-500V) with Built-in VSS with 3 nos. 2A SP MCB 1 set Ammeter (0-400A) with ASS and 3 nos.300/5A, CT's BUS-BAR 1 Set of 300A TPN Aluminium Bus Bar with colour coded PVC Sleeves OUTGOINGS 2 Nos. 160A TPMCCB (25 KA) 2 No. 63A TP MCCB (25 KA) 1No. 63A TP MCCB (25 KA) SPARE 2 Nos. of S/D starter with self illuminated Push button for ON & OFF and suitable rating of contactor and O/L relays, suitable for 75 HP Pump 1 Nos. of S/D starter with self illuminated Push button for ON & OFF and suitable rating of contactor and O/L relays, suitable for 12.5 HP Pump 2 Nos. of S/D starter with self illuminated Push button for ON & OFF and suitable rating of contactor and O/L relays, suitable for 5 HP Pump NOTE : The starters of Fire Fighting Pump shall be interlocked with the Pressure switch.

Supplying, installing, testing and commissioning of 12 Zones Microprocessor based conventional fire alarm control panel (FACP) with standard accessories complete as per specification no. FF-FAAS/FACP

Supplying and erecting PVC insulated PVC round sheathed FRLSH 1.5 sq.mm (30 no. x 0.25 mm dia.) 2 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV

Estimate no : 123118-5 of 2020-2021 Providing CCTV System in the Court Building At Ghodnadi-Shirur Tal: Shirur Dist: Pune Supplying and laying HMS PVC conduit 20 mm dia. with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.

Supplying and erecting PVC Surface modular switch box with double mounting plate for 4 modules duly erected.

Supplying and installing UTP networking cat-6 cable suitable for LAN / WAN Computer net-working as per specification No. WG-COC/NC

Supplying, fixing, and configuring web smart power over ethernet switch of 24 ports on provided rack or as directed as per specification No. WG-NWC/ENS

Supplying, installing and testing UTP connector (RJ-45) as per specification No. WG-NAS/UTPC

Supplying and fixing 6U wall mount rack (Dimension-DxWxH – 450x550x367 mm) as per specification No. WG-NAS/RAK

Supplying and erecting on line UPS pure sine wave of 1 kVA capacity complete with standard features, along with necessary SMF batteries for 30 mins. battery backup, as per specification no. AP-UPS

Supply Installation commissioning of 4 MP Full HD IP Bullet Camera- VIDEO COMPRESSION - H.265+/H.265/H.264+/H.264,VIDEO Resolution - 2688 x 1520 resolution,Frame Rate – Upto 25-30fps,Image Sensor - 1/3" 4 MP progressive scan imager,Lens Type – Fixed Focal,Zoom Lens - 2.8 mm, F2.0, Minimum illumination - 0.08 lux colour @ F2.0 (Colour, 1/3s, 30 IRE) , 0 lux B/W with IR LEDs on @ F2.0, Image Setting – Compression, Color, brightnrdd, sharpness, contrast, white balance, exposure control, backlight compensation,Protocol - IPv4/v6, TCP/IP, UDP, RTP, RTSP, RTCP, HTTP, HTTPS, SSL, FTP, SMTP, DHCP, PPPoE, UPnP, SNMP v2/v3, Bonjour, DNS, DDNS, IEEE 802.1X, QoS, NTP,Security - User account and password protection, HTTPS, IP filter, IEEE 802.1X, digest authentication, user access log, TLS1.2, AES-256, SSH/Telnet closed, FTP disable Operating Conditions - –30°C to 60°C Casing /Housing - INGRESS PROTECTION IP66, IMPACT RESISTANCE-IK10 Smillar to make sony, Axis, honeywell Three Year Warranty

Supply Installation commissioning of 4 MP Full HD IP Dome Camera- VIDEO COMPRESSION - H.265+/H.265/H.264+/H.264,VIDEO Resolution - 2688 x 1520 resolution, Frame Rate – Upto 25-30fps, Image Sensor - 1/3" 4 MP progressive scan imager, Lens Type – Fixed Focal, Zoom Lens - 2.8 mm, F2.0, Minimum illumination - 0.08 lux colour @ F2.0 (Colour, 1/3s, 30 IRE) , 0 lux B/W with IR LEDs on @ F2.0, Image Setting – Compression, Color, brightnrdd, sharpness, contrast, white balance, exposure control, backlight compensation, Protocol - IPv4/v6, TCP/IP, UDP, RTP, RTSP, RTCP, HTTP, HTTPS, SSL, FTP, SMTP, DHCP, PPPoE, UPnP, SNMP v2/v3, Bonjour, DNS, DDNS, IEEE 802.1X, QoS, NTP Security - User account and password protection, HTTPS, IP filter, IEEE 802.1X, digest authentication, user access log, TLS1.2, AES-256, SSH/Telnet closed, FTP disable Operating Conditions - –30°C to 60°C Casing /Housing - INGRESS PROTECTION IP66, IMPACT RESISTANCE-IK10 Smillar to make sony, Axis, honeywell Three Year Warranty

Supply Installation commissioning of 4K Embedded Network Video Recorder 32 Channels- MAIN PROCESSOR- Quad-core embedded processor, OPERATING SYSTEM -Embedded LINUX, AUDIO INPUT-1 Channel ,OUTPUT -1 Channel Output RCA , INTERFACE- 2 HDMI , 1 VGA , RESOLUTION - 3840 × 2160, OSD - Camera title; Time; Video loss; Camera lock; Motion detection; Recording, COMPRESSION- H.265/H.264/MJPEG/MPEG4, RECORD BIT RATE- 320 Mbps, RECORDING MODE -Schedule Regular/Continuous, Motion Detection, Alarm, Manual; Stop, TRIGGER EVENTS- Recording; PTZ; Tour; Alarm; Video Push; Email; FTP; Snapshot; Buzzer, VIDEO DETECTION- Motion Detection, ALARM INPUT, ETHERNET- 1 RJ-45 port (10/100/1000 Mbps), MAXIMUM NUMBER OF USERS -128 users. NETWORK THROUGHPUT -Input 320 Mbps; Output 320 Mbps , SMART PHONE COMPATIBILITY- iPhone; iPad; Android, INTERNAL HDD 4 SATA ports, EXTERNAL HDD- 1 eSATA port, USB PORTS- 3, EMISSIONS -FCC , SAFETY EU: EN 60950-1, UL listed to UL/CSA 60950-1, ROHS compliant ( Three Year Warranty )

Supply installation and commissioning of 42” Full HD Commercial LED Display /Monitor 42 inches or higher Full HD VGA DVI HDMI LAN USB RGB RS 232C IN/OUT AV IN COMPONENT IN AUDIO IN/OUT WIFI READY SPEAKERS( Sony / Samsung / Panasonic ) ( Three Year Warranty )

Supply Erecting Testing and Commissioning of 4TB HDD survillance ciard disk oduct Dimensions 10.2x2.5x15.2 cm item mode numbers ST4000VX007 Memory storage capacity 4 TB flash memory Installed size 4 TB, Digital storage capacity 4TB, hard Drive Rotation speed 5900RPM Surveillance DVRs ,Hardware Interface SATA 6.0 gB/S Graphics Card Interface PCI-E,Compatible Devices Desktop Buffer size64 MB.

Estimate no : 123118-6 of 2020-2021 Providing LAN & Telephone Wiring in the Court Building At Ghodnadi-Shirur Tal: Shirur Dist: Pune Supplying and laying HMS PVC conduit 20 mm dia. with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.

Supplying and erecting HMS P.V.C. conduit 25 mm. dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 1 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background..

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting telephone copper cable 2 pair with 0.5 mm dia. laid in provided PVC casing capping/ conduit as per specification No. WG-TW ( 84 nos x60 mtr avg)

Supplying and erecting jelly filled armoured telephone copper cable 20 pair with 0.5 mm dia. laid in provided trench as per specification No. WG-TW

Supplying and erecting jelly filled armoured telephone copper cable 50 pair with 0.5 mm dia. laid in provided trench as per specification No. WG-TW

Supplying, erecting, testing and commissioning of MDF Box 100 x 100 pairs as per specification No. WG-TW

Supplying, erecting, testing and commissioning of junction box suitable for 20 pairs as per specification No. WG-TW

Supplying, erecting, testing and commissioning of junction box suitable for 40 pairs as per specification No. WG-TW

Supplying, erecting, testing and commissioning of 10 pair module for connection & disconnection of telephone cable as per specification No. WG-TW

Supplying, erecting, testing and commissioning of digital (hybrid) type EPABX of 6 x 104 extensions suitable upto 96 extensions complete. ( NOTE ( 53731+(31576x4)= 180035*5%= 189036.75 for card = 24+(16x4)= 88

Supplying, erecting, testing and commissioning of push button telephone instrument desk top/wall mount with caller ID unit as per specification complete.

Supplying and installing approved type Digital key telephone / IP telephone instrument as per specification complete.

Supplying and installing UTP networking cat-6 cable suitable for LAN / WAN Computer net-working as per specification No. WG-COC/NC

Supplying and fixing 1 meter length, UTP patch cord of Cat 6 type in position as per specification No. WG-COC/PC

Supplying and fixing 3 meter length, UTP patch cord of Cat 6 type in position as per specification No. WG-COC/PC

Supplying, fixing, and configuring ethernet managed ethernet switch of 24 ports with 2 SFP + 2 combo port and web view/CLI on provided rack or as directed as per specification no. WG-NWC/GBS

Supplying and fixing tool-less Information Outlet (Ethernet) flush/surface type in provided modular box as per specification no. WG-NAS/IO

Supplying and fixing 24 port patch panel with tool-less keystone jacks in provided U Rack complete as per specification no. WG-NAS/PP

Supplying and fixing 6U wall mount rack (Dimension-DxWxH – 450x550x367 mm) as per specification No. WG-NAS/RAK

Estimate no : 123118-7 of 2020-2021 Providing 10 Passanger lifts (4 nos) in the Court Building At Ghodnadi-Shirur Tal: Shirur Dist: Pune Supplying and erecting ISI mark modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type 3 pin 6A multi sockets with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting PVC Surface modular switch box with double mounting plate for 4 modules duly erected.

Supplying and erecting LED 18W tube light fitting (4 feet) with polycarbonate housing, heat sink, integrated HF electronic driver complete.

Supplying and erecting bulkhead fitting suitable for upto LED upto 12W fixed on wall. As per specification no. FG-IDF/BHF

Supplying and erecting 10-12W, 230V integral type LED Lamp suitable for B-22/E-27 base.

Supplying, erecting and marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification no. SW- SWR/MCB

Supplying, erecting and marking DPMCB 6 A to 32 A B- series (for lighting) in provided distribution board as per specification no. SW- SWR/MCB

Supplying, erecting and marking TPMCB 40A to 63A in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting and marking FPMCB 6A to 32A in provided distribution board as per specification no. SW-SWR/MCB

Supplying and erecting single pole and neutral distribution board (SPNDB) with door surface/flush mounted with 2 ways for incoming and 10 ways for outgoing SP MCB’s on iron/ GI frame as per specification no. SW-SWR/MCBDB

Supplying and erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted suitable for 3 pole MCCB as incomer & outgoing SP MCB (24 poles) or TP MCB of 8 ways (24 poles) , on iron/ GI frame. (vertical busbar type) as per specification no. SW-SWR/MCBDB1

Providing and erecting 3 Pole MCCB upto 100A, 415V, with short circuit rating 25 kA (Ics=100% of Icu ),adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame as per specification no. SW-SWR/MCCB

Supplying, fixing and commissioning of 2 pole,RCBO (residual current breaker with overcurrent short circuit 10 kA and earth leakage protection), with 30/100/300 mA sensitivity and having capacity of 6/10/16/20/25A, as per specification no SW- RCCB/RCBO

Supplying, fixing and commissioning of 4 pole RCBO ( (residual current breaker with overcurrent short circuit 10 kA and earth leakage protection), with 30/100/300 mA sensitivity and having capacity of 6A/10A/16A/20A/25/A as per specification no SW- RCCB/RCBO

Supplying, erecting & terminating XLPE armoured cable 2 core 4 sq mm copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating XLPE armoured cable 4 core 6 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Providing earthing with copper earth plate size 30 x 30 x 0.315 cm complete with all materials, testing & recording the results as per specification no. EA-EP

Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification no. EA-EP.

SITC of Electric Traction Passenger Lift with • Rated capacity :- 10 Passenger/680Kg • Floors :- G+2 floor (3Stops/3 Landings) • Travel :- 3 to 7.2 mtrs • Location of Lift Machine:- MR/MRL • Rated speed :- 1.0mps VS • Doors type :- COPO/TOPO Doors with frame having clear opening of 800 mm wide x 2000 mm high made from SS 304 grade sheet of 1.5mm, thick in hairline finish for car and all landing doors with SS door architraves/frames • Lift car enclosure made from SS 304 grade sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate flooring, handrails, mirror, emergency light etc. • COP with SS face plate having metallic push buttons with Braille Code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with/without attendant key switch, OWD with audio-visual alarm, VAS in Marathi, Hindi & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor • Clear Car size of 1300 mm wide x 1350mm deep x2000.mm high • LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille Code & luminous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings • Lift controller based on microprocessor/ PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port, control panel duly wired with proper size & strength copper wire for power & control circuit, with provision for addition of floor/ control card & allied accessories control panel having enclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class • ARD complete with necessary SMF VRLA batteries • Fireman controller having fireman switch at fire Landing, • CCTV surveillance system comprises of 2nos minimum 2.0MP FHD IP based vandal proof Dome camera in lift car & in LMR/inside lift shaft top aimed on Lift machinery & controller with NVR kept in LMR/FCC with HDR data backup for 60 days with 18" FHD TV monitor, to be kept in FCC/LMR as directed by Engineer In Charge. • Lift Machine of Gearless PMSM of suitable kW with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves, suspension wire ropes/belts of adequate size & strength • Other mechanical parts such as 'T' section adequate size guide rails for car & counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc. erected with necessary steel work • Minor civil work for alteration if any and erection of door frames and accessories, erection buffers, erection of lift machinery, adequate size core cuts if required & scaffolding for erecting guide rails fixing of girders for mounting lift machine etc. complete as per specification no. LFT. • Lift shaft available having clear size of 2000 mm wide x 2700 mm deep ,1700.mm Pit depth,4500 mm Overhead. 1)General: - Job includes entire procedure of obtaining all necessary erection permissions & "License to Work the Lift" from Electrical Inspector(Lifts) with submission to the Engineer In Charge. 2) Warrantee: - Job covers three years onsite warrantee for all the Lift parts with FCAMC as per the maintenance schedule. 1) Note- A1 Door 800mmx 2000 mm 1 no - Rs 168283.50) Note C1 Full Collective control system 1 no Rs 33572.70 3) For vision panel having Size 100mm wide x 200mm high-4 nos each lift = Rs 4x3424.05= 13696.20

Estimate no : 123118-8 of 2020-2021 Providing Water Pump in the Court Building At Ghodnadi-Shirur Tal: Shirur Dist: Pune Supplying and erecting 525 V 3 phase, 50 Hz., MPP type capacitor having minimum overcurrent capacity of 1.8 In, peak inrush current capacity 300 In and minimum life 150000 hours kVAr bank of all polypropylene condensers (APP) with the standard capacities of 2, 3, 5, 7, 10, 12.5 and 15 kVAr units of P.F. correction for operation on 3 phase 50 Hz. with externally discharging resistances, earthing terminals and built on angle iron or channel iron frame work and provided with terminal cover box complete erected on provided iron bracket or on floor duly tested by licensee.

Supplying and erecting marine plywood 18/19 mm thick fixed to wall or on provided panel board with necessary materials such as screws, wall fasteners, supports, nut bolts etc. complete.

Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP

Supplying, erecting and marking FPMCB 40A to 63A in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & terminating XLPE armoured cable 4 core 10 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying and erecting four pole metal clad ON LOAD change over switch 415V, 40A erected on angle iron / GI frame complete.

Supplying and erecting ISI mark GI pipe 50 mm dia.‘B’ class at position with accessories complete. Specification no. CW-PLB/GP.

Supplying and erecting CRCA sheet metal one way enclosures suitable for DP MCB /TP MCB /FP MCB erected on angle iron/GI frame complete.

Supplying, erecting and marking TPMCB 6 A to 32A in provided distribution board as per specification no. SW-SWR/MCB

Supplying and erecting flat flexible 3 core 4 sq mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.

Supplying and erecting submersible pump set suitable for erection on open well of 3.75 KW/5 HP with 415 V 50 c/s.A.C. supply, having delivery head from 24 to 13m. and discharge from 400 to 1000 Itrs. per minute (Max efficiency at 21m head & 680 Itr discharge) & pipe of Suction 50mm / Delivery 50 mm diameter erected with necessary H type clamps as per specification no. WP-OSP

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Supplying and erecting cast iron double flange NRV of size 75/80 mm dia complete as per specification no. FF-VL/NRV

Supplying and erecting gun metal gate valve of size 50 mm dia complete as per specification no. FF-VL/GV

Making cement concrete foundation in 1:3:6 cement concrete, (20 to 25) mm. stone metal duly plastered with necessary curing for complete. (pole muffing or any other purpose).

Supplying and erecting automatic control panel for 3 Ph, 415 volt, A.c. Submersible/centrifugal pump set upto 7.5 HP consisting of DOL starter having relay range 9-14 AMP,S.P.P., Combined ammeter/voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc

Estimate no : 123118-9 of 2020-2021 Providing On Grid Solar Roof Top System in the Court Building At Ghodnadi-Shirur Tal: Shirur Dist: Pune Supplying, installing, testing and commissioning of 20 kWp capacity on grid solar power pack with GI mounting structure and inter connecting wires / cables without battery bank SPV modules and solar power conditioning unit of required capacity complete, with 5 years on site performance warrantee. Specification no. ESD-RT- ONG (add 36190 per KWp after 11 KWp 20 -11=9 KWp x 36190=325710+398096= 723806*5% add for other than district place= 759996.3)

Providing and erecting 4 Pole MCCB upto 100A, 415V, with short circuit rating 25 kA (Ics=100% of Icu ),adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame as per specification no. SW-SWR/MCCB

Providing and erecting floor / wall mounting, MCCB panel board with door suitable for four pole incoming 250A, 2 ways four pole outgoing upto 100 A MCCB's on iron frame, as per specification no SW-SWR/MCCBPB.(Excluding MCCB'S)

Providing and erecting incoming and outgoing cable alleys suitable for MCCB panel board with door of 250A incoming and 2 way outgoing made from CRCA sheet 1.6 mm thick duly powder coated and having vertical insulated partition for shielding between the shared face of cable way and DB complete.

Supplying and erecting SS enclosure for MCCB suitable for upto 100A MCCB complete.

Supplying and erecting marine plywood 18/19 mm thick fixed to wall or on provided panel board with necessary materials such as screws, wall fasteners, supports, nut bolts etc. complete.

Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

Supplying and erecting LT CT multifunction DLMS compliance energy meter of accuracy of class 0.5 , 3x240V,50 Hz with optical & RS 232 port, backlit LCD, measures & displays trivector energy, load survey, TOD, tamper detection & logging, power ON /OFF events, instantaneous parameters of rating 1/5 A with display in absence of power complete with zero adjustment & test certificate from manufacturer erected on provided M.S. box and connected to CTs.

Supplying and erecting AC three phase LT CT multifunction net meter DLMS compliance of accuracy class 0.5, 3 x 240V, 50Hz, with backlit LCD display, optical port & RS 232 port (measures import kWh, kVAh, export kWh, kVAh, Net kWh, kVAh, V, I, kW, 6 months history of energy, load survey,TOD, tamper detection & logging, power ON/OFF events, instantaneous parameters of rating 1/5A with display in absence of power) with wiring connections and mounting hardware on provided panels complete with calibration certificate from manufacturer.

Supplying and erecting LT current transformer with bar primary 50/5 to 1000/5 ratio with 15 VA burden erected in provided CRCA box duly secured with insulating materials connected to the meter with test certificates.

Supplying, erecting & terminating XLPE armoured cable 4 core 10 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP (structure-1 Inverter-1 & ACDB-1 DPAN-1)

Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification no. EA-EP.

Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification no EA-EP.(25x3 mm strip 90 mtr x 0.590 kg/mtr= 53 kg

Supplying and erecting conventional spike type air termination suitable to carry lightning stroke made up of heavy gauge 40 mm dia copper pipe of standard length with 5 Nos. copper spikes fixed on copper ball as air terminals duly threaded in copper pipe erected on provided foundation in an approved manner.

Shubham EPC Private Limited