PROVN OF RAIN WATER HARVESTING AT BHAKROTA AND JAIPUR UNDER GE JAIPUR

Amount

M&L for Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft /loose soil etc complete all as specified and directed.

M&L for Excavation over areas n.exc 1.5m deep and getting out in soft/loose soil etc complete all as specified and directed.

M&L for Excavation over areas exc 1.5m but n exc 3.00m deep and getting out in soft/loose soil etc complete all as specified and directed.

M&L for Excavation in trenches in soft/loose soil not exceeding 1.5 metre wide and n. exc 1.50m depth for foundation etc or for shafts, wells, cesspits , man holes, pier holes etc n. exc 10 sqm on plan and getting out in soft /loose soil etc complete all as specified and directed.

Returning filling in with excavated soil including spreading leveling, watering and well ramming in layers n.exc 25cm thick etc complete all as specified and directed.

M&L for Removing of excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point etc complete all as specified and directed

M&L for Removing of excavated material to a distance exc 50 m and n.exc 100 m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and directed.

M& L for cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in surface channels and drains and benching including finishing the top of the benching even and smooth using extra cement . (Note:- forming fair finish shall be measured and paid seperately.)

M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in coping including necessary form work etc complete all as specified and directed.

M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, mounds mitred/ stopped ends etc complete all as specified and directed.

Add/ Deduct extra for every 2.5cm or part thereoff over 30cm girth of serial item No 10 herein before.

M&L PCC in foundations, filling and mass-concrete type D2 (1:4:8) using 40 mm graded stone aggregate etc complete all as specified and directed.

M&L cement concrete (1:2:4) type B-2 using 40mm graded stone aggregate as in foundation filling and mass etc concrete complete all as specified and directed.

M&L form work (rough finished) on flat surfaces of foundations , footings, bases of column, raft and faft beams sides and soffits(if any) of foundation and plinth beams, and similar works vertical or to batter complete all as specified and directed.

M&L for Mild steel 10mm dia and over TMT bars as in reinforcement cut to length bent to shape required including cranking,bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia, etc complete all as specified and directed.

S&F mild steel TMT bars 6mm to 8mm dia, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for cement concrete M-30 (design mix) using 20mm graded stone aggregate as in foundation,including rafts, footings, foundation beams, plinth beams, bases for columns, etc basement slabs, under reamed piles and mass concrete complete all as specified and directed.

M&L for form work (rough finished) to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttressess etc vertical or to batter, complete all as specified and directed.

M&L for cement concrete M-30 (design mix) using 20mm graded stone aggregate as in walls, retaining walls, basement walls, ballast walls, and the like any thickness above top of footing incluidng attached pillaster and buttresses complete all as specified and directed.

M&L for form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick finish with rough finish flat surface complete all as specified and directed.

M&L for form work to edges of concrete flat treads, breaks in floor, window cills, concrete railings, openinigs in concrete walls, floor and roofs not exceeding 20cm wide etc complete all as specified and directed.

M&L for RCC M-30(design mix) using 20mm graded stone aggregates as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for Hardcore of broken stone aggregate of gauge 40 to 60mm, deposited, spread etc complete all as specified and directed.

M&L for Brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) etc complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of brick work /concrete surface in CM 1:6 finishing even and smooth without using extra cement complete all as specified and directed.

M&L for coarse sand filling under floor on in foundation in layers not exceeding 25cm each layer including watering and well ramming complete all as specified and directed.

M&L for broken stone aggregate of gauge 3 to 10 mm, complete all as specified and directed.

M&L for stone aggregate gravel of gauge 3.60 mm, etc complete all as specified and directed.

S&F GI tubing medium grade with all fitting 20 mm bore fixed to wall or concealed or fitted to ceiling or laid under floor etc complete all as specified and directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors dia of pipe 150 mm complete all as specified and directed.

S&F 100 mm dia vent PVC (SWR) pipe 600mm long etc complete all as specified and directed.

M&L Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming toFe-290(Gde E-165) etc complete all as specified and directed.

M&L Boring hole of 550mm dia in rainwater harvesting pit in any type of soil /strata for inserting HDPE 160mm outer dia pipe upto 100m deep etc complete all as specified and directed.

S&F 160mm outer dia HDPE pipe (PE80) PN-2.5 as per IS : 4984 in bore hole etc complete all as specified and directed

S&F 160mm outer dia HDPE perforated pipe as per IS : 4984 etc complete all as specified and directed

M&L for Pre-cast Reinforced cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in manhole covers and set in cement mortar (1:4) including form work etc complete all as specified.

S & F mild steel plates (plain or chequred) channels, square cut or notched (ordinary and counter sunk) forming holes, riveted, bolted or welded attachment complete all as specified and as directed conforming to Fe-410 W etc complete all as specified and directed.

M&L for Preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer etc complete all as specified and directed.

M& L for Rendering 15mm thick in cement mortar in 1:4 on fair faces of brick work or concrete surfaces even and smooth without using extra etc cement etc complete all as specified and directed.

M&L for Reinforced concrete pipes, 300 mm dia class NP2, laid in trenches and jointed complete with collars etc complete all as specified and directed.

JAGDAMBA CONSTRUCTION COMPANY

Pioneer Enterprises

UNIVERSAL INFRAPROJECT PVT LTD

M/S Anil Enterprises

AMIT RISHABH BUILDERS PVT LTD

Jupiter International Sales