A/MTC. OF HSVP OFFICE BUILDING SECTOR-6 U/E PANCHKULA. (PROVIDING 10 NOS. ACs AND OTHER ALLIED WORK THERETO IN VARIOUS OFFICES OF HEAD QUARTER OFFICE BUILDING SECTOR-6 UE PANCHKULA.) (INCLUDING ONE YEAR FREE MTC. AND DEFECT LIABILITY PERIOD FREE OF

[23.3.6.3]COPPER WIRING IN PVC CONDUIT (SURFACE/RECESS) 6.3. Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in PVC Conduit etc as required. 1 run of Size 4 Sqmm(1/2.24mm)

DRAIN PIPE Supply and fixing of Rigid uPVC medium class Piping complete with fittings,supports and duly insulated with 10 mm closed cell nitrile rubber insulation as per specifications. Make:- Supreme / Finolex / Ashirwad 32 mm

Providing and fixing of factory made heavy duty galvanised anodised with powder coating 60micron stand for AC outdoor unit on walls at all lvel including hardware complete in all respect

Rate Analysis on HSR BASIS (25.10.14) COPPER REFRIGERANT PIPING Supplying, Installation, testing and commissioning including vaccumization and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastomeric nitrile rubber tubular sleeves sections of 19 mm thick insulation as given below for Suction and Liquid lines, all accessories as per specifications etc. as required : 15.86 mm dia (OD)(SOFT) with tube thickness 1.2 mm (25.10.14.4)

Rate Analysis on HSR BASIS (25.10.14) COPPER REFRIGERANT PIPING Supplying, Installation, testing and commissioning including vaccumization and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastomeric nitrile rubber tubular sleeves sections of 19 mm thick insulation as given below for Suction and Liquid lines, all accessories as per specifications etc. as required : 9.5 mm dia (OD)(SOFT) with tube thickness 1.2 mm (25.10.14.2)

Rate Analysis on HSR BASIS (25.11.2.4) HI - WALL SPLIT SYSTEMS Supplying, Installation, Testing and Commissioning of Air Cooled Hi Wall split type Air conditioners complete with Indoor unit(IDU), Out door unit (ODU), surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 3.5 Mtr (IDU to ODU) i/c drain pipe R-32/R-410/ R-407 Green Refrigerant, wireless Remote control, suitable for working between 180-260V with low and high voltage cutoff and 50 hz ,1 phase AC supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll / rotary compressor. The system shall be able to deliver 100% of the rated capacity upto 42 °C. Min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB). Must comply : Electrical cable IS 694 or IS 9968 temperature sensing control IS /International Electrotechnical Commission (IEC) 60730, hermetic compressor IS 10617, heat exchanger IS 11329, capacitor IS 2993 and motor IS 12615. Complete as per CPWD specification and IS : 1391 Part II 2023. The system shall be able to operate up to 50 °C (out door ambient temperature). Inverter Type- Cooling only 2.0 TR with 5 Star BEE Rating

Supply, Installation, Testing and Commissioning of copper wound voltage stabilizer suitable for 1.5 / 2.0 ton split type A.C. including its necessary connection with A.C. including the cost of petty material required to complete the job complete in all respect upto the entire satisfaction of Engineer-in-Charge Make: Packard/ Total line/ Deol (A) or equivalent make 5 KVA Voltage Stabilizer.