REPAIR TO DG SET FOR ELECTRIC SUPPLY WATER SUPPLY AND STP INSTALLATION AT ATS SAMBRA BELAGAVI

Amount

Excavation in trenches not exceeding 1.5m depth and not exc 1.5m wide and getting out in hard / dense soil for laying cable/erecting poles etc all as specified and directed.

Returning and filling in soil including spreading levelling watering and well ramming in layers not exceeding 25cm thick layer all as specified and directed

Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point all as specified and directed

M & L Cutting hard standings / bituminous layer for laying pipe including refilling back with PCC 1:2:4 using 40mm graded stone aggregate, ramming up and finishing the surface all as specified and directed

Taking out the unserviceable /out lived/chocked HDPE/ UPVC/ M S water tubing of size 200mm from trenches and offering credit all as specified and directed

All as per item No.5 herein before but size 90mm to 110mm.

All as per item No 5 herein before but size 63mm to 75mm dia

All as per item No 5 herein before but size 25mm to 50mm dia

M & L High density polyethylene pipes (HDPE), 200 mm bore, PE -80 grade of pressure rating 4 kgf/sqcm laid in trenches all as specified and directed

All as per item No.9 here in before but 90 mm bore.

All as per item No.9 here in before but 63 mm bore.

All as per item No.9 here in before but size 40 mm bore.

All as per item No.9 here in before but 25 mm bore.

Supply and lay Mild Steel 100 mm bore Pipes, heavy grade with all fittings laid in floors or fixed to walls and ceilings etc all as specified and directed

Supply and lay water tubing, Unplasticised PVC pipes, 75 mm bore of pressure rating 4 kgf/cm2 laid in trenches all as specified and directed.

All as per item No.15 herein before but 63 mm bore.

All as per item No.15 here in before but size 25 mm bore.

All as per item No.15 here in before but of size 50 mm bore.

Supply and fixing in repair copper conductor 2 core 1.5 sqmm, armoured cable including suitable size of PVC conduit/ Casing Capping complete all as specified & directed.

Supply only gear oil suitable for aerator of STP complete all as specified and directed.

S & F Galvanised Iron tubing, medium grade, 15 mm bore fixed as stand post duly supported/grouted in cement concrete including taking down unserviceable stand post all as specified directed.

S & F Galvanised Iron tubing, medium grade, 20 mm bore fixed as stand post duly supported/grouted in cement concrete including taking down unserviceable stand post all as specified directed.

S & F Galvanised Iron tubing, medium grade, 25 mm bore fixed as stand post duly supported/grouted in cement concrete including taking down unserviceable stand post all as specified directed.

S & F Galvanised Iron tubing, medium grade, 40 mm bore fixed as stand post duly supported/grouted in cement concrete including taking down unserviceable stand post all as specified directed.

S & F Galvanised Iron tubing, medium grade, 50 mm bore fixed as stand post duly supported/grouted in cement concrete including taking down unserviceable stand post all as specified directed.

S & F Gun metal gate valve, with iron wheel head, screwed both ends for iron/PVC pipe and fixed to 50mm bore pipe including taking down existing valve all as specified and directed

All as per item No 26 herein before but 40mm bore

All as per item No 26 herein before but 25mm bore

All as per item No 26 herein before but 20mm bore

All as per item No 26 herein before but 15mm bore

S & F Cast iron butterfly valve with iron wheel head or handle screwed both ends for iron/PVC pipe and fixed to 100mm bore pipe including taking down old valve all as specified and directed.

All as per item No 31 herein before but fixed to 80 mm bore

All as per item No 31 herein before but fixed to 50 mm bore

M & L Taking up/down submersible type sewage lifting pump and motor of capacity up to 7.5 HP from the collection sump of any depth, dismantling, servicing the pump set, cleaning thoroughly and replacing bearing bushes, servicing of impellers and replacing other minor spares etc and refixing back in original position, testing to the satisfaction of GE complete all as specified and directed

M & L Taking out submersible pump set motor up to 30HP capacity, dismantling, rewinding using suitable size super enamelled insulated copper wires, replacing the worn out bushes, bearing etc complete and re-assembling pump and motor, fixing back to the original position including jointing weather proof cable with water proof sealing kit of M seal make, including testing in full load etc complete for satisfactory operation all as specified and directed.

M & L Taking out pump set motor up to 15HP capacity, dismantling, rewinding using suitable size super enamelled insulated copper wires, replacing the worn out bushes, bearing etc and re-assembling pump and motor, fixing back to the original position in the pump houses of STP/WTP including connecting up, testing in full load etc complete for satisfactory operation all as specified and directed.

S & F Flat multistranded copper cable 3 core 6 sq mm suitable for submersible pump set, aerator motor, clarifier connections including taking down old cable all as specified and directed.

S & F Flat multistranded copper cable 3 core 4 sq mm suitable for submersible pump set, aerator motor, clarifier connections including taking down old cable all as specified and directed.

M & L Taking out mono block centrifugal pump set/ non clog sewage pump set of capacity 5 HP from the existing STP & sewage pumping installations after disconnecting the inlet /out let pipe connections, disconnecting the electric supply cables, dismantling, transporting to repair work shop, servicing the pump set including cleaning the shaft, replacement of worn out bearing, bushes, check nut, shaft sleeves etc and fixing back to original position, testing etc complete all as specified and directed

M & L Power contactor suitable for star delta/ DOL starter, including necessary connections with PVC insulated suitable wire for the following capacity motors including removing the unserviceable power contactor for the following all as specified and directed:-

(a) Monoblock pump set of capacity 5 HP, L&T MX 9 AC 3.

(b) Monoblock pump set of capacity 7.5 HP, L&T ML 1.5

(c) Monoblock pump set of capacity 10 HP, L&T ML 2

(d) Monoblock pump set of capacity 15 HP,L&T ML 3

Supply and Fix Over load relay assembly suitable for star delta starter, including rewiring with copper insulated suitable wire for the following capacity motors including removing the unserviceable over load relay assembly for the following all as specified and directed:-

(a) Monoblock pump set of capacity 05/7.5 HP

(b) Monoblock pump set of capacity 10/15 HP

M & L taking down mono block/centrifugal pump set motor of following capacity from the existing foundation after disconnecting the inlet / out let pipe connections, disconnecting electrically and transporting to work shop for repair including cleaning the shaft, replacement of worn out bearing, bushes, check nut, shaft sleeves and gland packing,re-assembling, fixing back to original position and testing for smooth functioning to entire satisfaction all as specified & directed:-

Supply and fixing control gear box consisting micro processor controlled automatic and temperature control system suitable for Kirloskar Model NS50/26 QMB sewage lifting submersible pump set all as specified and directed.

S & F Pressure gauge, analogue type of range up to 10 kg/cm2 including taking down the existing unserviceable pressure gauge all as specified and directed.

M & L Starter Star Delta fully automatic, suitable for 7.5/10 HP, 3phase, 4 wire system, along with suitable relay, contactor and connectors pre wired and connecting to existing system with pump sets after taking down existing u/s starter complete all as directed

All as per Sl item No.45 herein before but suitable for 15 HP.

S & F Starter DOL type suitable for up to 5 HP, 3 phase, along with suitable relay, contactor and connectors pre wired and connecting to existing system with pump sets after taking down existing unserviceable starter complete all as directed.

Supply, fabricating, fixing of mild steel channel or angle iron or flat iron bracket in square/circular shape for bracing, suitable to support indication board including nuts, bolts and washers, welding, bending, drilling holes for bolts to fix valve pit cover including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

Supply and fixing mechanical joint of dia 250 mm suitable for existing pipe and including taking down existing joint complete all as specified and directed

All as per item No 49 herein before but 200mm dia

All as per item No 49 herein before but 100mm dia

Supply and Fixing PVC Collar of size 150 mm suitable for existing HDPE pipe including taking down existing collarcomplete all as specified and directed

All as per item No.52 here in before but of 100 mm bore.

All as per item No.52 here in before but of 50 mm bore.

All as per item No.52 here in before but of 40 mm bore.

M & L Comprehensive maintenance / servicing of DG set of capacity 160 KVA Kirloskar Model No.4K1080TA G2 ENGINE SR.NO. 4H.7906 /1720122 located at telephone exchange including new gasket tappet cover, replacement of oil & fuel filter etc, adjustment of engine, external cleaning all as specified and as directed Note : Lube oil filter, fuel filter, oil shall be paid under respective item of this schedule.

Supply only Lub oil Filter of DG set of capacity 160 KVA Kirloskar Model No.4K1080TA G2 ENGINE SR.NO. 4H.7906 /1720122 as per Existing filter all as specified and directed.

Supply only Fuel Filter for DG set of capacity 160 KVA Kirloskar Model No.4K1080TA G2 ENGINE SR.NO. 4H.7906 /1720122 as per Existing filter all as specified and directed.

Comprehensive maintenance / servicing of DG set of capacity 125 KVA Kirloskar Model No.4K1080TA G2 ENGINE SR.NO. 4H.7906 /1720122 location at Pump House No: 02 including new gasket tappet cover, replacement of oil & fuel filter etc, adjustment of engine, external cleaning all as specified and as directed Note : Lube oil filter, fuel filter, oil shall be paid under respective item of this schedule.

Supply only Lub oil Filter of DG set of capacity 125 KVA Kirloskar Model No.4K1080TA G2 ENGINE SR.NO. 4H.7906 /1720122 as per existing in place of engine complete all as specified and directed.

Supply only Fuel Filter of DG set of capacity 125 KVA Kirloskar Model No.4K1080TA G2 ENGINE SR.NO. 4H.7906 /1720122 as per Existing in place of engine complete all as specified and directed.

Comprehensive maintenance / servicing of DG set of capacity 75 KVA Kirloskar Engine Model 4R1040TA location at Signal Section including new gasket tappet cover, replacement of oil & fuel filter etc, adjustment of engine, external cleaning all as specified and as directed Note : Lube oil filter, fuel filter, oil shall be paid under respective item of this schedule.

Supply only Lub oil Filter of DG set of capacity 75 KVA Kirloskar Engine Model 4R1040TA as per existing in place of engine complete all as specified and directed.

Supply only Fuel Filter o fDG set of capacity 75 KVA Kirloskar Engine Model 4R1040TA as per existing in place of engine complete all as specified and directed.

Comprehensive maintenance / servicing of DG set of capacity 62.5 KVA - 02 Nos Kirloskar Engine Model 4R1040T location at NTTI and Class Room including new gasket tappet cover, replacement of oil & fuel filter etc, adjustment of engine, external cleaning all as specified and as directed Note : Lube oil filter, fuel filter, oil shall be paid under respective item of this schedule.

Supply only Lub oil Filter of DG set of capacity 62.5 KVA - Kirloskar Engine Model 4R1040Tas per existing in place of engine complete all as specified and directed.

Supply only Fuel Filter of DG set of capacity 62.5 KVA Kirloskar Engine Model 4R1040T as per existing in place of engine complete all as specified and directed.

Comprehensive maintenance / servicing of DG set of capacity 50 KVA Kirloskar Engine Model 4R1190 location at BTI Hanger including new gasket tappet cover, replacement of oil & fuel filter etc, adjustment of engine, external cleaning all as specified and as directed Note : Lube oil filter, fuel filter, oil shall be paid under respective item of this schedule.

Supply only Lub oil Filter of DG set of capacity 50 KVA Kirloskar Engine Model 4R1190 as per existing in place of engine complete all as specified and directed.

Supply only Fuel Filter of DG set of capacity 50 KVA Kirloskar Engine Model 4R1190as per Existing in place of engine complete all as specified and directed.

Comprehensive maintenance / servicing of DG set of capacity 40 KVA - 04 Nos location at PH No.5, WTP, SMC & STP Engine Kirloskar Model 4R1040 PLUS, Engine No. 4H.3048/1321880, Engine No. 4H.3048/1220675, Engine Model 4R1040T and HA494 including new gasket tappet cover, replacement of oil & fuel filter etc, adjustment of engine, external cleaning all as specified and as directed Note : Lube oil filter, fuel filter, oil shall be paid under respective item of this schedule.

Supply only Lub oil Filters of DG Sets specified in item no 71 as per existing in place of engine complete all as specified and directed.

Supply only Fuel Filter of DG Sets specified in item no 71 as per existing in place of engine complete all as specified and directed.

Comprehensive maintenance / servicing of DG set of capacity 35 KVA - 03 Nos location at Mutga- UEB, Signal Section and PH No.3 Kirloskar Engine Model HA494 - 03 Nos and Engine Kirloskar Model HA494, Engine No. 04.2002/0400117 including new gasket tappet cover, replacement of oil & fuel filter etc, adjustment of engine, external cleaning all as specified and as directed Note : Lube oil filter, fuel filter, oil shall be paid under respective item of this schedule.

Supply only Lub oil Filter of DG Set specified in item no 74 existing in place of engine complete all as specified and directed.

Supply only Fuel Filter of DG Set specified in item no 74 as per existing in place of engine complete all as specified and directed.

Comprehensive maintenance / servicing of DG set of capacity 15 KVA - 03 Nos location at Bore well No.1, Catering Faculty and 2 T'Mess Engine Kirloskar Model HA294, Engine No. 02.2145/1223289 and Model No.HA294 G1 ENGINE SR.NO 02.8307/1720145 including new gasket tappet cover, replacement of oil & fuel filter etc, adjustment of engine, external cleaning all as specified and as directed Note : Lube oil filter, fuel filter, oil shall be paid under respective item of this schedule.

Supply only Lub oil Filter of DG Set specified in item no 77 Existing in place of engine complete all as specified and directed.

Supply only Fuel Filter of DG Set specified in item no 77 as per Existing in place of engine complete all as specified and directed.

Comprehensive maintenance / servicing of DG set of capacity 10 KVA location at PH No.4 Kirloskar Model No.TA2 SR2 ENGINE SR.NO.21.1042/0200594 including new gasket tappet cover, replacement of oil & fuel filter etc, adjustment of engine, external cleaning all as specified and as directed Note : Lube oil filter, fuel filter, oil shall be paid under respective item of this schedule.

Supply only Lub oil Filter of DG Set specified in item no 80 as per Existing in place of engine complete all as specified and directed.

Supply only Fuel Filter of DG Set specified in item no 80 as per Existing in place of engine complete all as specified and directed.

Comprehensive maintenance / servicing of DG set of capacity 7.5 KVA location at Open Well Kirloskar Model No.TA2 SR2 ENGINE SR.NO.21.8042/ 9800031 including new gasket tappet cover, replacement of oil & fuel filter etc, adjustment of engine, external cleaning all as specified and as directed Note : Lube oil filter, fuel filter, oil shall be paid under respective item of this schedule.

Supply only Lub oil Filter of DG Set specified in item no 83 as per Existing in place of engine complete all as specified and directed.

Supply only Fuel Filter of DG Set specified in item no 83 as per Existing in place of engine complete all as specified and directed.

Comprehensive maintenance / servicing of DG set of capacity 160 KVA - 02 Nos location at Station HQ and 1000 Trainees Billet Mess Kirloskar Model No.6K1080TA ENGINE SR.NO.6H.8422/1920037 and 6H.8412/1820148 including new gasket tappet cover, replacement of oil & fuel filter etc, adjustment of engine, external cleaning all as specified and as directed Note : Lube oil filter, fuel filter, oil shall be paid under respective item of this schedule.

Supply only Lub oil Filter of DG Set specified in item no 86 as per Existing in place of engine complete all as specified and directed.

Supply only Fuel Filter of DG Set specified in item no 86 as per Existing in place of engine complete all as specified and directed.

Comprehensive maintenance / servicing of DG set of capacity 100 KVA location at STP 800 Cum/day South Camp Kirloskar Model No.4K1080TAG2 ENGINE SR.NO.4H.7906/1820306 including new gasket tappet cover, replacement of oil & fuel filter etc, adjustment of engine, external cleaning all as specified and as directed Note : Lube oil filter, fuel filter, oil shall be paid under respective item of this schedule.

Supply only Lub oil Filter of DG Set specified in item no 89 as per Existing in place of engine complete all as specified and directed.

Supply only Fuel Filter of DG Set specified in item no 89 as per Existing in place of engine complete all as specified and directed.

Note for item no 56 to 67.2 :- i) All the spares replaced will be measured and paid under 'supply only'. Labour charge for replacing are deemed to be included in the quoted rate of the comprehensive maintenance. ii) The authorised service provider shall inspect, check and necessary servicing to be carried out for all the DG sets minimum once in two month to ensure the serviceability / safety of the plant. Further to such routine visits the service provider shall attend all the break down calls immediately on priority for carrying out necessary repairs / replacement of the unserviceable spares of the plants as and when directed.

(iii) Quoted rates deemed to be included the following :- (a) Lubricating oil filter element with 'O' ring (b) New rectangular seal on the pilot located on lub pump with accessories such as mounting bolt & washer. (c) Replacing fuel filter element with new fuel filter element and new 'O' rings after taking down existing. (d) Replacement of gasket rocker lever cover with new gasket rocker lever cover. (e) Replacement of nut regular hexagon with new nut regular hexagon. (f) Replacement of screw slotted set with new screw slotted set

Supply only Engine Oil (15W 40 / 20 W 40 K Oil Premium) suitable for DG set.

Dismantling the unserviceable lead acid battery, supply and replace new battery 105 AH including initial charging and connecting up complete all as directed.

Dismantling the unserviceable lead acid battery , supply and replace new battery 130 AH including initial charging and connecting up complete all as directed.

Supply and replacement of the unserviceable battery charger SMPS based suitable for 6 Amps, 12 volts batteries and including taking out unsv battery charger any type complete all as specified and directed.

Supply and replace the unserviceable VMR (Voltage Monitoring Relay) relay suitable for 3 phase, 40 to 160 KVA DG Set to AMF Panel and including taking out unsv VMR relay any stype complete all as specified and directed.

M & L Servicing of self starter after taking down from D G Set of capacity upto 75 KVA, transporting to workshop, opening, replacing the defective parts, rewinding using suitable size super enamelled insulated copper wires, refixing back in original position, testing complete all as specified and directed.

All as per the above item No. 73 But self starter of DG set 100 KVA to 160 KVA capacity.

S & F Battery Lead of size 35 Sq mm copper single core flexible wire FR PVC insulated with thimble complete all as specified and directed.

Supply of Coolant additive in 10 Ltrs pack all as specified and directed.

Supply and fix in repair armed hose flexible suitable for 10 to 160 KVA as per existing all as specified directed

Supply and fix in repair change over off load switch 4 pole 63 Amp with sheet metal enclosure including necessary modification to accommodate the change over switch complete all as specified and as directed..

S & F single phase preventer in panel to prevent single phasing complete all as spcified and directed.

M & L for Power contactor 4 pole 7.5 to 40 KVA, Type MCX 12 suitable for DG Set AMF panel, including necessary connections with PVC insulated suitable wire including removing the unserviceable contactor comlete all as specified and directed.

M & L for Power contactor 4 pole 50 to 62.5 KVA, Type MCX 22 suitable for DG Set AMF panel, including necessary connections with PVC insulated suitable wire including removing the unserviceable contactor comlete all as specified and directed.

M & L for Power contactor 4 pole 75 to 160 KVA Type MCX 33 suitable for DG Set AMF panel, including necessary connections with PVC insulated suitable wire including removing the unserviceable contactor comlete all as specified and directed.

Supply and filling distilled water for levelling to 12 volts batteries complete all as specified and directed.

M & L Taking up/down Centrifugal Pump Sets of capacity 7.5 HP - 02 Nos and 15HP-02 Nos at WTP area from existing pumping pit by using necessary pulley block/crane and carefully disconnecting all electric / Water supply connections and Refixing back on original position including new damp proof rubber sheets not less than 5 mm thick over newly built precast block masonry complete all as specified & directed Note :- Quoted rate is deemed to be included that taking out carefully all suction and delivery pipe line connections for the obove 4 pumps and refixing the same with necessary MS pipe of sizes 80/100/200mm (up to 5mtrs of each pipe size) including bends /elbows / couplings and welding if necessary after fixing the pump on concrete block platform with leak proof joints complete all as directed

M & L for Power contactor 4 pole 7.5 to 40 KVA, Type MCX 12 suitable for DG Set AMF panel, including necessary connections with PVC insulated suitable wire including removing the unserviceable contactor comlete all as specified and directed.

M & L Pre cast cement concrete 1:3:6 using 20mm graded stone aggregate as in solid block masonary set in cement mortar 1:4 complete all as specified and directed

M&L rendering 15mm thick cement mortar1:4 on fair concrete surfaces finished even and smooth wthout using extra cement

M & L Preparation of new plastered wall surface and applying two coats of exterior emulsion weather proof paint over a coat of self primer complete all as specified and directed

S & F mild steel Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 all as specified and directed

Supply and Fixing Door Hinges 100mm, medium weight,for existing door of DG set of any capacity,by means of welding, screwing etc including taking out old unserviceable hinges complete all as specified and directed.

Supply and replace the unserviceable relay cord 12 Volt suitable for 3 phase, 40 to 160 KVA DG Set to AMF Panel and including taking out unserviceable relay cord any type complete all as specified and directed.

Supply and Fixing Push Switch for AMF Panel of DG set any capacity, as per existing including taking out old unserviceable switches complete all as specified and directed.

All as per the item No. 94 herein before but 2 channel.

All as per the item No. 94 herein before but 3 channel.

All as per the item No. 94 herein before but 4 channel.

Supply and Fixing LLOP (Low Lub Oil Pressure) for Panel of DG set any capacity as per existing LLOP including taking out old unserviceable LLOP complete all as specified and directed.

Supply and Fixing glass channel relay 12 Volt for Panel of DG set any capacity, as per existing, including taking out old unserviceable glass channel complete all as specified and directed.

Supply and Fixing CT Coil cap 75/5 Amp for Panel of DG set any capacity, as per existing, including taking out old unserviceable coil cap complete all as specified and directed.

Supply and Fixing LVM (Line Voltage Monitor) for Panel of DG set any capacity, as per existing, including taking out old unserviceable LVM complete all as specified and directed.

M & L Cleaning the Radiator of DG Set capapcity upto 75 KVA for cleaning and removing all scale and dirt etc, arresting of leakages/blockages if any, complete all as specified and directed.

All as per the above item No. 103 but capacity 100 KVA to 160 KVA.

Supply and fix in repairs fire alarm control panel complying with BS EN 54 two loop panel of capacity from 99 detectors and modules up to 200 detectors and modules per loop including testing complete. Note: System should be tested and proved functionality after carrying out repairs all as specified and directed

Supply and fix in repairs fire alarm control panel complying with 2 zone LCD control panel, non expandable 2x16 character LCD display panel, resettable output for 4 wire connectivity beam sensors etc including testing complete all as specified and directed.

Supply and fix in repairs addressable call point with LED resistor 470 OMH flush mounting flexi element complete all as specified and directed.

Supply and fix in repairs to red conventional call point with LED resistor 470 OHM flush mounting flexi element complete all as specified and directed.

Supply and fix in repairs detector complying with certified to EN-45 type multi sensor detector with heat and smoke with self built intelligence as per IS-11360 and as per site requirement complete all as specified and directed.

Supply and fix in repairs to rate of rise thermal detector low profile design low current draw wide operating voltage 8 to 30 DC bo colour LED detector status indicator programmable sensitivity advanced maintenance featuresvia remote handled test unit and as per site requirement complete all as specified and directed.

Supply and fix in repairs 2 wire plug in detector base for series 300 detectors and as per site requirement complete all as specified and directed.

Supply and fix in repairs Red mini horn red UL certified India and as per site requirement complete all as specified and directed.

ASHIRWAD ELECTRICALS

N K CONSTRUCTION